MacBook Pro A1278 starts with black or white screen

Please help, my 13 "Macbook Pro, circa 2011 displays a white screen briefly and make sound boots, then goes to a white screen.  I tried to reset the PRAM a couple of times, no luck, reset SMC strikes did not help.

Can anyone offer additional troubleshooting steps?

Thank you.

Please take each of these steps that you have not already tried it. Some of them are not applicable to your model or your situation. Stop when the problem is resolved.

To restart a computer is not responding, press and hold the power button for a few seconds until the unit turns off, then release, wait a few seconds and press again briefly.

Step 1

The first step to respond to a startup failure is to secure data. If you want to keep the contents of the boot drive and you have not already at least a current backup, you should try to back up now, before we do anything else. It may or may not be possible. If you don't care the data changed since the last backup, you can skip this step.

There are several ways to back up a Mac that is unable to boot. You need an external hard drive to store backup data.

a. starting the partition recovery or an hour Local Machine backup volume (button option key at startup). When the OS X Utilities appears, launch disk utility and follow the instructions in this support articleto the title of the "Instructions for the backup on an external hard drive via disk utility". The article refers to the start of a DVD, but the recovery mode procedure is the same. You don't need a DVD if you use OS X 10.7 or higher.

(b) If step 1 fails due to disk errors, and no other Mac is available, then you may be able to save some of your files by copying them in the Finder. If you already have an external hard drive with OS X installed, the start of it. Otherwise, if you have access to the Internet, follow the instructions on this page to prepare the external hard drive and install OS X on it. You will use the installation program of recovery, rather than download it from the App Store.

c. If you have access to a Mac, and it work and have both the non-working Mac FireWire ports or stroke, start the Mac non-working in target disk mode. Work Mac to copy the data to another drive. This technique will not work with USB, Ethernet, Wi - Fi or Bluetooth.

d. If the internal drive of the non-working Mac is replaceable by the user, remove it and climb into a docking station that is pregnant or an external drive. Use another Mac to copy the data.

Step 2

If you have booted from an external drive, make sure that the internal boot volume is selected in the pane of the system preferences Startup disk.

Start in safe mode. Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. If you do not see the words "Safe Boot" in the start screen, you did not start in safe mode. Ask for additional instructions.

Safe mode is much slower to boot and run as normal, and some things don't work at all, including the networks without wire on some Macs.

The login screen is displayed even if you normally connect automatically. You must know the password for the connection to connect. If you have forgotten the password, you will have to reset it before you begin.

If the startup progress bar gets stuck for more than a few minutes, or the system stops automatically when the progress bar appears, the boot volume is corrupted and the player is probably defective. In this case, go to step 9. If you have another problem with the player, replace it immediately.

If you can start and log in in safe mode, empty the trash and then open the window of info on the boot volume ("Macintosh HD", unless you have given it a different name.) Make sure you have at least 9 GB of space available, as shown in the window. If you do not, copy as many files as necessary on another volume (not another folder on the same volume) and delete the originals. Deletion is not complete until you empty the trash again. This, until the space is more than 9 GB. Then restart as usual (i.e., not in safe mode.)

If the boot process hangs again, the problem is probably caused by third-party software you have installed. Ask for additional instructions.

Step 3

If the startup process stops at a gray screen together with a mobile cursor, then the logon dialog box may be active but not visible because of a bug. You may be able to connect by using the arrow keys or the cursor to select the password field and type your password as usual.

Step 4

Case of failure of step 3, the boot volume can be complete. If you saw previously implemented guard space drive is low, it is certainly the case. You might be able to start in safe mode , even if you cannot boot normally. Otherwise, boot from an external hard drive, or well technology for step 1b, 1 c or 1 d allows to mount the internal drive and delete some files. According to the documentation from Apple, you need at least 9 GB of free space on the boot (as shown in the Infolog) for normal operation volume.

Step 5

If a Mac desktop (without the built-in keyboard) crashes on a gray screen together with a mobile cursor, the keyboard may not be recognized. Hold down the button on the side of a wireless Apple keyboard to make it discoverable. If need be, replace or recharge the batteries. If you use a USB keyboard connected to a hub, connect it to a built-in port.

Step 6

Sometimes, a startup failure can be solved by resetting the NVRAM.

Step 7

If there is an integrated optical drive, a disk may be stuck in there. Follow these instructions to remove it.

Step 8

Press and hold the power button until the unit turns off. Disconnect all devices wired except those needed to start and remove all aftermarket expansion cards. Use another keyboard and/or mouse, if these devices are wired. If you can start now, one of the devices that you disconnected, or a combination of both, the origin of the problem. Discover that it is a process of elimination.

Step 9

Launch the utility disk in recovery mode (see step 1). Select the boot volume, and then run the repair disk. If problems are found, repeat until that clear. If disk utility reports that the volume is not repairable, the drive is defective and must be replaced. You can choose to tolerate such malfunction in the reader's life. In this case, delete the volume and restore it from a backup. If the same thing happens again, replace the drive immediately.

It is one of the rare situations where you must also run repair permissions, ignoring the erroneous warnings, that it can produce. Look for the line "Permissions repair complete" at the end of the output. Then restart as usual.

Step 10

If the boot device is an aftermarket SSD, it may have an update and/or a forced "garbage collection". Instructions how to do this with a Crucial SSD of brand have been posted here. Some of these instructions may apply to other brands of SSDS, but you should check with the technical support of the provider.

Step 11

Reinstall the OS. If the Mac has upgraded an earlier version of Mac OS X, you need the Apple ID and password used to upgrade.

Step 12

Do as in step 11, but this time clear the disk utility boot volume before installing. The system should restart automatically in the installation wizard. Follow the prompts to transfer data from one Time Machine or another backup.

Step 13

This step applies only to models that have a battery logic-board ("PRAM"): all of the Mac Pro, MacBook with a removable main battery and a few others (models not updated). A flat battery logic-board may cause a boot failure. In general the failure will be preceded by the loss of the system and boot disk clock settings. Refer to the user manual for replacement instructions. You may need to take the machine to a provider of services to have to replace the battery.

Step 14

If you get this far, you probably deal a hardware failure. An appointment of 'Genius' to an Apple Store, or select another authorized service provider.

Tags: Notebooks

Similar Questions

  • New Apple MacBook Pro. Contrast of black and white not as sharp as the previous MacBook Pro. How please

    Not as strong black and white contrast on my new Macbook Pro retina adjustment last version of El Capitan. The black color is certainly lower than in my previous MacBook Pro. The contrasts are not as sharp and the screen has a grayish tint which I'm having a difficult time of adjustment. It is not my eyes. Any tips? Thank you. WillyG

    Did you try System Preferences > display > color and CALIBRATE?

    Ciao.

  • Satellite C650D-007 starts with a blank white screen

    Hello world

    I need emergency aid, 3 weeks ago, I bought this new laptop from Futureshop.ca and now, today, I pressed the power button to turn it on and when it does I get this white screen of white.

    I even tried removing the battery and connect the AC and it always produces the same thing.

    I can't believe after that only 3 weeks it has stopped working.

    PS: it feeds on. just a white screen empty. No logo nothing.

    Thanks in advance.

    Hello

    In the past I didn't had this problem but it must be hardware related issue, so you need to do is to contact Futureshop, explain the problem and ask for replacement.
    Second option for you is to contact the nearest Toshiba service directly. They can check your laptop and replace the defective hardware.

  • New MacBook Pro 13 "2016 with 2008 LED Cinema screen A1267

    I want to continue using my screen and no one seems closed that Retina display is compatible with the LED Cinema Display Monitor.

    Love at first sight communicates with the Mini Display Port connection on the screen?

    HELP and contradictory responses from the Apple Store was of NO help.

    Yes.  Plug the Mini DisplayPort screen to a Thunderbolt port on the computer.  Connect the USB cable to one of the USB ports on the computer.  You will need to use the power of the computer display, a MagSafe MagSafe 2 converter.

    http://www.Apple.com/shop/product/MD504LL/A/MagSafe-to-MagSafe-2-converter

  • I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How do I rename them.

    I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

    I have a HARD disk with two partitions and two copies of Win7 but at the start, I have the black and white screen asking me only one to choose. How can I rename the Windows 7 and Windows 7 Test to start in one I want right here?

    Use BCDEDIT to SET the description that you are wanting to "Rename" and also to choose the displayorder, timeout and that you load by default...

    Maybe this old conversation will help you:
     http://www.SevenForums.com/general-discussion/20191-renaming-earlier-version-Windows-dual-boot.html

  • connecting macbook pro (A1278) to TV via hdmi cable

    I'm trying to connect my macbook pro (A1278) to my TV via the hdmi cable, but it doesn't work. The connection does not work. What is on my macbook screen does not appear on my TV. My tv displays just a black screen. Is there some sort of settings that I need to activate? What is the problem?

    OS X El Capitan: use your TV as a monitor

    Make sure that your input of the TV is set to the same port that your computer is connected to.

  • Best case for Macbook Pro 13 inch with Retina display

    I was wondering what the best case was for my purchase of a Macbook Pro 13 inch with the retina display. I am a student of the school and will walk to school with her in a compartment of my bag. It might be high everywhere, but he must be not so bulky that I also have school books. Any suggestion?

    If you are specifically looking for a shell, then I recommend the INCASE ones, just go to the apple store and get my things for Mac they have a feeling of fluidity buttered and are pleasant to the touch - as the Apple trackpad - it simply snaps on and snaps off when you want off the coast.  If you are looking for a Holster, I recommend the slim sleeve incase.  It has a soft interior for your mac are not destroyed (its aluminium-what worries you - you did you buy Care, haven't you?) and has a spot for the port of loading.

    I hope this helps!

  • My old macbook pro is slow with a lot of the beach ball. Ive checked using Etrecheck. Here is their report

    My old macbook pro is slow with a lot of the beach ball. Ive checked using Etrecheck. Here is their report if anyone can suggest my best course of action.

    EtreCheck version: 2.9.12 (265)

    Report generated 2016-06-06 13:18:02

    Download https://etrecheck.com EtreCheck

    Time 05:55

    Performance: average

    Click the [Support] links to help with non-Apple products.

    Click the [details] links for more information on this line.

    Click on the link [check files] help with unknown files.

    Problem: Beachballing

    Hardware information:

    MacBook Pro (15-inch, mid 2010)

    [Technical details] - [User Guide] - [warranty & Service]

    MacBook Pro - model: MacBookPro6, 2

    1 2.4 GHz Intel Core i5 processor: 2 strands

    4 GB of RAM expandable - [Instructions]

    BANK 0/DIMM0

    OK 2 GB DDR3 1067 MHz

    BANK 1/DIMM0

    OK 2 GB DDR3 1067 MHz

    Bluetooth: Old - transfer/Airdrop2 not supported

    Wireless: en1: 802.11 a/b/g/n

    Battery: Health = Normal - Cycle count = 779

    Information on this video:

    Intel HD Graphics

    NVIDIA GeForce GT 330M - VRAM: 256 MB

    Color LCD 1680 x 1050

    System software:

    OS X El Capitan 10.11.5 (15F34) - since startup time: less than an hour

    Disc information:

    ST9500325ASG disk0: (500,11 GB) (rotation)

    EFI (disk0s1) < not mounted >: 210 MB

    Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB

    Macintosh HD (disk 1) /: 498,88 (Go 274,92 free)

    Storage of carrots: disk0s2 499.25 GB Online

    MATSHITADVD-R UJ-898)

    USB information:

    Computer, Inc. Apple IR receiver.

    Built-in ISight from Apple Inc..

    Card reader Apple

    Apple Inc. Apple keyboard / Trackpad

    Apple Inc. BRCM2070 hub.

    Apple Inc. Bluetooth USB host controller.

    Guardian:

    Mac App Store and identified developers

    Unknown files:

    ~/Library/LaunchAgents/com.vndv.tagfolders.tagprompter.plist

    osascript/Users/Duffy/Library/Application Support / files/Tag Prompter.app/Contents/Resources/ Tag

    Scripts/TagPrompterScript.scpt

    A unknown file found. [Check files]

    Kernel extensions:

    / System/Library/Extensions

    au.com.maxon.driver.MaxonFamily [no charge] (1.0 - 2016-06-05) [Support]

    com [no charge]. Seagate.driver.PowSecDriver (4.4.10 - 2016-06-05) [Support]

    com [no charge]. ZTE.driver.ZTEUSBCDCACMData (ZTEDriver_MacV1.3.1 - 2016-06-05) [Support]

    com [no charge]. ZTE.driver.ZTEUSBMassStorageFilter (ZTEDriver_MacV1.3.1 - 2016-06-05) [not loaded] com.microsoft.driver.MicrosoftMouse (8.0 - 2016-06-05) [Support]

    com.option.driver.Option72 [no charge] (2.17.0 - 2016-06-05) [Support]

    com.option.driver.OptionMSD [no charge] (1.21.0 - 2016-06-05) [Support]

    com.Realtek.driver.rtl8187 [no charge] (1.4.5 - 2016-06-05) [Support]

    com.seagate.driver.PowSecDriverCore [no charge] (5.2.6 (26913) - 10.4 SDK - 2016-06-05) [[no charge] com.sierrawireless.driver.SierraDIPSupport (1.0.0.2 - 2016-06-05) [Support]]

    com.sierrawireless.driver.SierraDevSupport [no charge] (1.0.7 - 2016-06-05) [Support]

    com.sierrawireless.driver.SierraFSRSupport [no charge] (1.0.1 - 2016-06-05) [Support]

    com.sierrawireless.driver.SierraHSRSupport [no charge] (2.1.1.4 - 2016-06-05) [Support]

    com.sierrawireless.driver.SierraIPDirect [no charge] (1.1.1 - 2016-06-05) [Support]

    com.Wacom.kext.wacomtablet [no charge] (Tablet Wacom 6.3.7 - 3 - SDK 10.8 - 2016-06-05) [/System/Library/Extensions/Maxon.kext/Contents/PlugIns

    au.com.maxon.driver.MSM6280Panther [no charge] (1.0 - 2010-04-10) [Support]

    au.com.maxon.driver.MSM6280Universal [no charge] (1.0 - 2010-04-10) [Support]

    /System/Library/Extensions/MicrosoftMouse.kext/contents/plugins

    com.microsoft.driver.MicrosoftMouseBluetooth [no charge] (8.0 - 2010-07-18) [Support]

    com.microsoft.driver.MicrosoftMouseUSB [no charge] (8.0 - 2010-07-18) [Support]

    / System/Library/Extensions/Seagate storage Driver.kext/Contents/PlugIns

    com.seagate.driver.PowSecLeafDriver_10_4 [no charge] (5.2.6 (26913) - 10.4 SDK - 2014 - 10-[Support])

    com.seagate.driver.PowSecLeafDriver_10_5 [no charge] (5.2.6 (26913) - SDK 10.5 - 2014 - 10-[Support])

    com.seagate.driver.SeagateDriveIcons [no charge] (5.2.6 (26913) - 10.4 SDK - 2014-10-07) [System launch Agents:]

    [loaded] 7 tasks Apple

    [loading] 167 tasks Apple

    [operation] 64 tasks Apple

    Demons of launch system:

    [operation] com.seagate.TBDecorator.plist (2013-10-12) [Support]

    [loaded] 45 tasks Apple

    [loading] 161 tasks Apple

    [operation] 85 tasks Apple

    Launch of Agents:

    [no charge] com.adobe.AAM.Updater - 1.0.plist (2016-06-05) [Support]

    [failure] com.adobe.ARMDCHelper.cc24aef4a1b90ed56a... plist (2016-05-11) [Support]

    [operation] com.adobe.AdobeCreativeCloud.plist (2015-07-29) [Support]

    [loading] com.google.keystone.agent.plist (2016-03-11) [Support]

    com.oracle.java.Java - Updater.plist [no charge] [Support]

    [operation] com.wacom.wacomtablet.plist (2013-10-12) [Support]

    Launch the demons:

    [loading] com.adobe.ARMDC.Communicator.plist (2016-05-11) [Support]

    [loading] com.adobe.ARMDC.SMJobBlessHelper.plist (2016-05-11) [Support]

    [operation] com.adobe.adobeupdatedaemon.plist (2015-09-25) [Support]

    [loading] com.adobe.agsservice.plist (2015-09-25) [Support]

    [loading] com.adobe.fpsaud.plist (2016-05-10) [Support]

    [loading] com.adobe.versioncueCS3.plist (2014-02-25) [Support]

    [loading] com.google.keystone.daemon.plist (2016-03-11) [Support]

    [loading] com.microsoft.office.licensing.helper.plist (2010-08-25) [Support]

    com.oracle.java.Helper - Tool.plist [no charge] [Support]

    [loading] com.sierrawireless.SWoCTool.plist (2011-11-04) [Support]

    [loading] jp.co.canon.MasterInstaller.plist (2015-05-08) [Support]

    User Agents to launch:

    [loading] com.adobe.AAM.Updater - 1.0.plist (2015-06-16) [Support]

    [loading] com.adobe.ARM. [...]. plist (2009-11-30) [Support]

    [failure] com.adobe.ARM. [...]. plist (2011-07-29) [Support]

    [loading] com.divx.agent.postinstall.plist (2012-07-13) [Support]

    [loading] com.vndv.tagfolders.tagprompter.plist (2010-07-10) [Support]

    jp.co.canon.Inkjet_Extended_Survey_Agent.plist [no charge] (2015-05-08) [Support]

    User Login items:

    MicrosoftMouseHelper Application (/ library/PreferencePanes/Microsoft Mouse.prefPane/Contents/)

    Resources/MicrosoftMouseHelper.app)

    AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat 8 Professional / Adobe Professional.app/Contents/Support/AdobeResourceSynchronizer.app)

    Dropbox application (/ Applications/Dropbox.app)

    Hidden AdobeResourceSynchronizer Application (/ Applications/Adobe Acrobat DC/Adobe Acrobat.Contents/Helpers/AdobeResourceSynchronizer.app)

    CNQL1208_ButtonManager Application hidden (/Library/CFMSupport/CNQL1208_ButtonManager.Other Apps):

    [operation] com.adobe.acc.AdobeDesktopService.123232.836E8B5D-E858-42E5-8697-D6A881EA5C22

    [ongoing] com.Adobe.accmac.95392

    [ongoing] com.etresoft.EtreCheck.181152

    [ongoing] com.getdropbox.dropbox.147872

    [ongoing] com.Intego.virusbarrierexpress.agent

    [ongoing] com.Microsoft.microsoftmousehelper.124512

    [ongoing] com.wacom.TabletDriver.144032

    [ongoing] com.wacom.WacomTouchDriver.124192

    [ongoing] jp.co.canon.scanner.CNQL2410_ButtonManager.121312

    [loading] 417 tasks Apple

    [operation] 170 tasks Apple

    Internet Plug-ins:

    AdobePDFViewerNPAPI: 15.016.20039 - SDK 10.11 (2016-05-11) [Support]

    Flash Player: 21.0.0.242 - SDK 10.6 (2016-06-05) [Support]

    EPPEX plugin: 10.0 (17-09-2014) [Support]

    AdobePDFViewer: 15.016.20039 - SDK 10.11 (2016-05-11) [Support]

    iPhotoPhotocast: 7.0 (2010-05-11)

    QuickTime Plugin: 7.7.3 (2016-06-05)

    FlashPlayer - 10.6: 21.0.0.242 - SDK 10.6 (2016-06-05) [Support]

    NP_2020Player_IKEA: 5.0.94.1 - SDK 10.6 (2012-09-28) [Support]

    AdobeAAMDetect: 3.0.0.0 - SDK 10.9 (2015-09-25) [Support]

    GarminGpsControl: output 2.9.3.0 (2010-10-29) [Support]

    DivXBrowserPlugin: 2.2 (2012-06-07) [Support]

    OVSHelper: 1.1 (2012-06-07) [Support]

    Silverlight: 4.0.60531.0 (2011-10-30) [Support]

    Web of Google Earth plugin: 5.1 (2009-11-12) [Support]

    Default browser: 601 - SDK 10.11 (2016-06-05)

    Flip4Mac WMV Plugin: 2.4.4.2 (2012-07-13) [Support]

    SharePointBrowserPlugin: 14.5.6 - SDK 10.6 (2015-10-10) [Support]

    WacomTabletPlugin: WacomTabletPlugin 2.1.0.2 (2013-10-12) [Support]

    NP_2020Player_WEB: 5.0.7.0 (2011-04-03) [Support]

    WacomNetscape: 2.1.0 - 1 - SDK 10.8 (2013-11-22) [Support]

    The internet user Plug-ins:

    Unity Web Player: UnityPlayer version 2.6.1f3 (2014-03-15) [Support]

    RealPlayer Plugin: unknown

    Unity Player: UnityPlayer version 1.6.0 (2007-02-11) [Support]

    Safari extensions:

    1 - ClickWeather - TWCi - http://www.weather.com/ (2012-06-03)

    Better Facebook - Matt Kruse - http://BetterFacebook.net (2012-06-03)

    PIN button - Pinterest, Inc. - http://www.pinterest.com/ (2015-07-06)

    SlickSavings - tap, Inc. (2015-04-09)

    DivX Plus Web Player HTML5 < video > - © 2000-2011 DivX, LLC. - http://divx.com (2012-07-13)

    CLEA. Nr Videos - Internet Cleaner A - http://clea.nr/ (2015-09-25)

    Translate - SideTree.com - Mac Apps and the Web - http://SideTree.com/extensions.html#Translate

    (2014-07-21)

    AdBlock - Michael Gundlach - https://getadblock.com (2015-09-15)

    3rd party preference panes:

    Adobe Version Cue CS3 (2014-02-25) [Support]

    RCDefaultApp (2006-11-27)

    DivX (2012-06-07) [Support]

    Flash Player (2016-05-10) [Support]

    Flip4Mac WMV (2012-05-16) [Support]

    Microsoft mouse (2011-07-30) [Support]

    Seagate for Mac OSX dashboard (2014-09-12) [Support]

    Time Machine:

    Skip system files: No.

    Mobile backups: OFF

    Automatic backup: YES

    Volumes to back up:

    Macintosh HD: Disc size: 498,88 GB disc used: 223,95 GB

    Destinations:

    Duffy photos & website [Local]

    Total size: TB 3.00

    Total number of backups: 32

    An older backup: 10/10/2014, 19:02

    Last backup: 25/01/2016, 20:57

    Size of backup drive: Excellent

    Size of backup 3.00 TB > (disk size 498,88 GB X 3)

    Portable Duffy - drive FreeAgent GoFlex [Local]

    Total size: 999,86 GB

    Total number of backups: 21

    An older backup: 10/08/2014, 16:00

    Last backup: 07 11, 2015, 12:47 AM

    Size of backup drive: adequate

    Backup size 999,86 GB > (disc 223,95 GB X 3)

    Duffys MacBook Pro backup two [Local]

    Total size: 1.00 TB

    Total number of backups: 2

    An older backup: 10/10/2014, 01:10

    Last backup: 02 19, 2015, 16:59

    Size of backup drive: adequate

    Backup size 1.00 TB > (disc 223,95 GB X 3)

    Top of page process of CPU:

    36% mdworker (3)

    4% WindowServer

    4% kernel_task

    0% adobe CEF Helper (3)

    0% fontd

    Top of the process of memory:

    Kernel_task 484 MB

    Dropbox 143 MB

    139 MB Adobe CEF Helper (3)

    Pier 90 MB

    90 MB WindowServer

    Virtual memory information:

    718 MB of free RAM

    3.30 GB used RAM (1.39 GB being cached)

    Used Swap 0 B

    Diagnostic information:

    6 June 2016, 13:07:18 test - passed

    June 6, 2016, 10:58:42 ~/Library/Logs/DiagnosticReports/

    storedownloadd_2016-06-06-105842_ .crash [deleted]

    /System/Library/PrivateFrameworks/CommerceKit.Framework/versions/A/resources/Sto redownloadd

    June 5, 2016, 23:00:46 / Library/Logs/DiagnosticReports /.

    WacomTabletDriver_2016-06-05-230046_ .crash [deleted]

    / Library/Application Support/Tablet/WacomTabletDriver.app/Contents/MacOS/WacomTabletDriver

    June 5, 2016, 22:38:17 / Library/Logs/DiagnosticReports /.

    AdobeCrashDaemon_2016-06-05-223817_ .crash [deleted]

    / Applications/utilities/Adobe Creative Cloud / * / Core Sync.app/Contents/Frameworks/

    AdobeCrashReporter.framework/Versions/A/AdobeCrashDaemon.app/Contents/MacOS/

    AdobeCrashDaemon

    June 5, 2016, 19:45:43 ~/Library/Logs/DiagnosticReports/

    EtreCheck_2016-06-05-194543_ .crash [deleted]

    /Users/user/downloads/EtreCheck.app/Contents/MacOS/EtreCheck

    Delete

    Intego antivirus.

    Mouse Microsoft (not responsible in any case)

    All extensions/plugins that you do not use.

    Restart Etrecheck.

  • Qosmio F50-125 starts with black screen after a BIOS update

    Hello

    After instalation if new bios (v 2.0), computer sometimes starts with black screen.
    Even the first page that show press F2 to enter the bios is not displayed.

    You have someone older version of bios?
    So, I might try if it's the fault of it.

    Hello

    I think that the old BIOS will not help you because the laptop would have known that you try to update the BIOS to the older version, and it would break to the top of the procedure.
    In addition, the older BIOS is not available on the European driver Toshiba page.
    I think just only a Toshiba ASP had an older version of BIOS.

    Anyway, you said that sometimes happens.
    This means that this issue doesn't still persist
    Hmm. in this case, I recommend the default BIOS settings and update the driver display.

    Check it out!

  • How to connect an old 23 "Cinema Display to a MacBook Pro 15 inch with Retina display

    I have an old 23 "Cinema HD Display, part number M9178LL/A and want to connect it to a recent MacBook Pro 15 inch with Retina display 2104.

    The Cinema Display has a power adapter and 3 USB, Firewire connectors and a DVI (think that's what it's called).

    The MacBook Pro has USB, Thunderbolt, and HDMI ports.  I have a crush on Firewire adapter, but I don't know what I need to plug the DVI or if it will work.

    I also remember that years ago Apple sold "docks", so that you can use your laptop with a keyboard and a standard monitor.  Is this always the case?

    If anyone can help?

    Thank you very much.

    Adapt you the Thunderbolt computer monitor DVI connection (use a Mini DisplayPort adapter) or HDMI port. USB and FireWire connections are only needed if you plan to use the screen as a hub.

    (138898)

  • I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

    I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

    I use a splitter cable, and have verified meter that it is properly connected.  Also the microphone that I try to use the works when connected to a separate Recorder device, so I know who works very well.

    The audio output on a 2012 port does not support the audio input.  You will need to use the USB ports for audio input.  This will require an appropriate hardware and software.

    Ciao.

  • Create the image with black and white patterns

    Hello

    With the attached VI I am able to create an image that is completely black (or white or any color according to values in the color palette). See picture1.

    Is it possible to create an image as photo 2 and photo 3 or any other form which consists of black and white patterns? I need an image with black and white areas that a camera can recognize.

    Thanks for any help.


  • Ultra II 480 GB on Macbook Pro mid-2010 with El Capitan - Trim

    Hi all

    I just bought and installed an Ultra II 480 GB on Macbook Pro mid-2010 with El Capitan.  Trim is not enabled, I endable it?

    Thank you.

    indothai wrote:

    Hi all

    Trim is not enabled, I endable it?

    Thank you.

    Well it's really you. I don't have TRIM enabled on my macbook running el capitan and don't have any problems and I've seen reports of problems with TRIM.

  • Hi, im changing a sheet with writing on it (true leaf scaned) it's an old technique (90) and I wan't my text color is similar to that of the sheet (the color is spotted with black and white noise)

    ABM Verso - Copie test.png

    Hi, im changing a sheet with writing on it (true leaf scaned) it's an old technique (90) and I wan't the color of my text to be the same as in the worksheet (color is spotted with black and white noise) as you can see...

    Add a new layer above your text. Fill it with 50% gray. Add a bit of noise:

    Set the blending mode to lighten:

    Add a Gaussian blur to match the other text:

    Usage levels to set the contrast:

  • How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

    How can I fix a black and white screen on the air from my iPad? I rebooted it and ran the last updated IOS 9.2 on it. It is stuck and won't return to the color. All other functions work except this.

    Have you checked the settings > General > accessibility > greyscale > power off.

    If this does not work ty settings > General > accessibility > zoom > on. Triple, tap the screen with three fingers. Tap choose filter. Click None. Triple, tap the screen to get rid of the menu zoom. If you have enabled greyscale in zoom you can disable it in zoom.

Maybe you are looking for

  • Real player video download option not appearing is not since the upgrade to 3.6.6

    Real Player video DOWNLOAD option does not appear with firefox. This has happened Each time Firefox opened == I myself upgraded to 3.6.6

  • Disabling the shortcut key for Japanese input to "Kana Input" method

    Hello With Windows 7, there is a rather annoying problem happens sometimes when I am typing using the Japanese keyboard layout, it seems I am struck somehow mysteriously a set of keys that snap into the layout of entry Romazi entry in Kana from the o

  • Web launcher in blackberry

    Hello friends, I do an application j2me in which I launch a websit. means that when I run my website application is open, so that I am just change of name of the Web site and when I click on that application open this site. Means that when I run my a

  • An unknown user shown in my command "net user"!

    I typed "net user" it shows Admin, guest,and a HsUser_ItS3BI4BRqZ more I typed "net use HsUser_ItS3BI4BRqZ"" " and it shows the details of this user as below: Username: HsUser_ItS3BI4BRqZ Full name: HsUser_ItS3BI4BRqZ Comment: Shadow HackShield user

  • Oracle cross-platform Windows to Linux migration

    Hi all!Have a problem to need advice.I have a WIndows server 2003 R2 (32-bit) with Oracle 11.2.0.1 and I migrate to Linux with Oracle 11.2.0.4I've been reading on and try to use on windows expdp and impdp on Linux.I have the sequence right to make th