MacBook Pro going on my Network Configuration

Similar Questions

• MacBook Pro connects to the network, but other computers will be

  As of today, my Macbook Pro (approx. 5-6 years running Yosemite) has had problems to connect to my network, even if the other computers connect very well.

  On the menu bar, it shows that I am connected with a signal strong.

  My only guess is that the hardware is obsolete?

  Thanks to anyone who can offer help.

  What happens if you disable wifi then on again? Have you tried to delete the WiFi network preferences and put it back? What kind of messages if none pull you.

• MacBook Pro goes black rear boot.

  This is my daughter pro MacBook.

  I remember exactly what OS it is running, but I think it's 10.9

  She returned to be there and told me that one day it just started doing this:

  After starting and the normal boot process, the screen goes black and a few seconds later, a dialog box appears (on the Blackened screen) indicating:

  "Untrusted caller.

  SecurityAgent only can be invoked only by the Apple software.

  Before and after this dialog box the screen remains black, with only the visible cursor arrow.

  Any thoughts?

  Thanks in advance!

  AA

  Try this: restart in Mode without failure, then reboot normally.

  OS X El Capitan: start in safe mode

• 70 d EOS will pair with MacBook Pro using ad hoc network.

  Matching infrastructure (Airport) worked well.

  Matching via ad hoc network, failed however. Twinning on the Mac starts OK and recognizes the 70 d. When the camera is turned on, the window appears advising to follow the instructions on the LCD for 70 d. However, screen gets stuck on the message of pairing process and the small symbol of antenna radiating on the screen of the LCD monitor (on top of the camera) flashes indicating that he expects a connection.

  Utility EOS 2.13.20.0

  Mac OS X 10.6.8

  70 d 1.1.1 firmware

  The problem was with the:

  EOS 70 d (w)

  Wi - Fi function

  Operating instructions

  provided with the camera. The instructions to set up an ad hoc network are not at all clear and left quite confused me.

  I turned instead:

  EOS step by step installation Guide

  Wireless file transmitter

  EOS Utility Mode

  Infrastructure or ad-hoc networks

  Mac OS x 10.5 - 10.6

  Although some different menus, (e.g. 70 d lack of network Assistant)

  This guide is a model of clarity, and I was able to successfully adapt its instructions to my situation.

  Has worked the first time like a charm.

  Canon take note.

• Macbook Pro 17 "since mid-2007 update

  Hi all

  I currently have a MBP 17 "bought mid-2007.

  So far, the computer is doing well (for a 9yo computer). I just upgraded to El Capitan without problem. However, for some years now, my computer is slow (which is I guess than expected).

  I was trying to update.

  Here is the info:

  MacBook Pro (17-inch 2. 4 GHZ)

  Processor 2.4 GHZ intel core 2 Duo

  Memory 2 GB 667 MHz DDR2 SDRAM

  Graphics NVIDIA GeForce 8600M GT 256 MB

  I would be interested in upgrading my RAM and also do a SSD upgrade.

  RAM upgrade

  As I understand it, with my mac, I go to 4 GB of RAM. In this regard, I have 2 questions:

  -is it worth it for me to update the RAM (I am currently using on average 1.7 GB / 2 GB of RAM)

  Should-2x2gb RAm I buy? I looked a little, but I can't find exactly the name of 667 MHz DDR2 SDRAM for 2x2gb... Would be Crucial 4 GB Kit (2GBx2) DDR2-667 SODIMM memory for Macdo the trick?

  SSD upgrade

  Today, the mbp is a 160 GB SATA drive. For me, 160 GB is quite small, I'm always struggling with space when I barely programs on.

  Is it worth updating the SSD in my case?

  If so do you have any recommendations on what SSD to buy it?

  I've never updated before mac so your knowledge and your comments are very much appreciated!

  Thanking you in advance for your help

  See you soon!

  Hi Aqualover001:

  Congratulations on maintaining your Macbook Pro going for so long.

  You can actually improve your memory 6 GB. http://eShop.MacSales.com/search/MacBook+Pro+2007

  El Capitan uses a lot of memory. I have a Macbook Pro 2011 and had 4 GB of memory and found it was not enough. I upgraded to 8 GB and it works well.

  I don't know if you can add a SSD, but I found a video on installing a hard drive, but it seems a little involved. Here is a video to view. https://www.YouTube.com/watch?v=K9r1UAVq9AU

  Maybe someone else who has a 2007 can comment on the SSD.

  Kim

• my macbook pro stops when I put it near my little fridge there is a risk

  the macbook and the refrigerator

  Nearby magnets can make a Macbook pro sleep.

  Do not keep the Mac is close to a referigerator.

  MacBook Pro goes to sleep when stacked.

  http://support.Apple.com/kb/TS2917

• MacBook pro freezes for 5-10 minutes everytime I wake up from sleep mode?

  Since the upgrade to Yosemite, my macbook pro goes to the loading screen grey which usually appears when opening my laptop after that he almost dies everytime I wake up from sleep mode. It freezes on this screen for a few moments, and then when I get to my normal screen, it continues to remain frozen for an extra few minutes. The mouse will not work until a "Set up Bluetooth keyboard" menu appears, then disappears. The problem has persisted through several software updates. I searched endless forums and topics, but none seem to match my problem. Can anyone help?

  Data sheet:

  OS X Version 10.10.1 Yosemite

  MacBook Pro (15-inch, mid-2012)

  2.3 GHz Intel Core i7 processor

  16 GB 1600 MHz DDR3 memory

  Free to 318,84 GB 107,02 GB

  I had the same situation; started during the upgrade to Yosemite, continued with El Capitan. I tried a n y t h i n g for a few months, revisiting the forums etc. The message in the system log, leaving the "driver GPU seems to be suspended. Does my Mac Pro completely unworkable. It was a software problem because it does not occur in safe mode. Now I just went down to the Mavericks and the problem is completely resolved. I can use my computer again.

• Premiere Pro CC 2014 launch the new Macbook Pro

  As if Adobe problems with my new Mac Pro is not enough, I can't even first Pro 2014 to start on my top 2 dating from the day of the laptop line. I searched it online without answers in the forums on this site or on Creative Cow.

  

  Everything is updated. Freshly installed Premiere Pro CC 2014 through the creative application of cloud. When I run the application, I get the initial screen with the beach ball and it never opens. Fan of my Macbook Pro goes haywire, and no other applications won't work (including the activity monitor). I have to manually, press and hold the power button & force shutdown every time.

  I was going to finish some changes at home this weekend, but now I have to get back to the Office Sunday & work on my another troubled system. Therefore, on these issues with Premiere Pro. Help?

  Thanks guys, but none of the recommendations has contributed with the exception of Jason on the copy of the user data on. I called Adobe tech support and while I had my head turned work something else, the guys reset some of my adobe via the Console app and Ottoman info, the app has opened. I was amazed because my technical support calls are usually long and often no fix is reached. This time, the guy slayed it. Feels good to win one!

• Can't see the network hpsetup on my Macbook Pro on a C4780

  Help - I'm trying to get working wirelessly on a C4780 connected to a new Macbook Pro with 10.6.2.  I am on a network of wireless-G linksys with WPA_PSK and when the HP configuration utility try to connect to my network, it goes into "the network... search. "forever.  So, I tried to connect manually by some of the other posts, but I can't find the network hpsetup even after resetting to the default printer.  The serial number of the printer is CN99SD12ZF.  Is that printers with factory default SSID settings incorrect?  If so, what I try next?

  Some sent C47xx factory printers have an incorrect default setting in their non-volatile memory that prevents the method of ad-hoc configuration.  There is nothing wrong with the printer HW or FW and you should still be able to set up the printer using the Setup program on the CD.

  If necessary, it is a manual method to get the printer on your network.  Here's how to printers wireless C47xx:

  Part 1 - Get the printer in Ad-Hoc Mode Wireless

  (1) turn on the printer.

  (2) display the printer has six keys; three on the left (top-left, middle left, below on the left) and three on the right (top-right, centre-right, bottom-right).  Press and release the following touch buttons in order:

  top left,

  bottom-left,

  top left,

  top left.

  (3) you should see the internal menu of printers.  Press the right button down to select 'Service Menu'.  Press OK (lower-left).

  4) press the lower button right until you see "Reset Menu".  Press OK (lower-left).

  5) press the lower button right until you see "half full".  Press OK (lower-left).

  (6) after a few seconds, the printer turns off.  Press the power button to turn on the printer.  It is now reset with the correct default network settings.

  (7) turn on the radio:

  • Press the Scan button to get the wireless settings
  • Select wireless Menu
  • Select wireless settings
  • Select Enable Wireless to turn on the radio.

  Part 2 - run the Wireless Setup Wizard

  The printer has now created an ad - hoc network called hpsetup.  To connect to this network on your Mac.

  Check the connection to the printer by opening the printer's internal web page.  You can do this by opening Safari, select bookmarks and then Showall the bookmarks.  On the left pane of Safari, select Hello and on the right, you should see your printer listed.  Double-click your printer and Safari should display the printer's internal web page.

  In the Web page of the printer, click Networking , and then select Wireless (802.11().  Now press Start the wizard to launch the wireless configuration wizard.

  When the wizard is finished, your computer unplug the printer's ad - hoc network as the printer reconfigures itself to connect to your network home.

  Reconnect your computer to your home network.  Verify that you can connect to the printer at the opening of its internal web page again once we were doing before.

  Finally, install the printer SW.  Since you have Snow Leopard, you don't need the CD that came with the printer.  Instead, open the Print & Fax under System Preferences applet and press the [+] button.  Highlight your printer and click Add.

• MacBook Pro mid2011 OS10.9.5 not find the network

  Hi, I can't find a similar thread to answer.

  I have a MacBook Pro for mid-2011 on OS 10.9.5.  I took a few days and did not use it on another network, when I got home it would not participate in my sky Hub wifi.  It shows the network and join her for a few seconds then say research network, then wifi and then looking again once every two seconds, saying: it has an auto assigned IP.  I have reset the router (white sky Hub), removed from the network and joined on the MacBook Pro, called sky and made all the sky router diagnostic tests and conclude it is a question on the MBP.  I have iPhone, iPad and iMac all work on the network.  I tried MBP ethernet to the router and that did not work, I think that it was a matter of intellectual property but tried this after speaking do sky can be due to lack of user overall upward.

  Advice thoughts welcomed with gratitude!

  Jules

  Hello Jules.

  Thank you for using communities of Apple Support.

  I see that you get an automatic IP address assigned during the connection to your network by either ethernet or Wi - Fi.  To help solve this problem, please contact your ISP for support support staff.  To learn more about automatic assigned IP addresses, please see the link below.

  Internet connection does not work with a space of 169.254.xxx.xxx of ISP IP address, router or manual configuration

  See you soon.

• El Capitan 10.11.2 disconnects from the network of Canon printer macbook pro after each use but with the same OS version iMac remains connected

  How to prevent my Macbook Pro El Capitan 10.11.2 going to disconnect my network printer Canon?   My iMac running the same OS version don't unplug and behaves like any normal wireless connection.  I deleted the printer and added back, reset printing, etc. nothing works.  Given that the Mac is 6 "each other and 5 feet of printer during the last test, it must be something specific to the Macbook.  The Macbook identifies the printer after each reboot the printer as printer Canon right, but once the task is completed does not have the printer.  Everything is on the same wireless network. Computer Windows also recognizes the printer and it keeps alive after printing.

  Please read this message before doing anything.

  This procedure is a diagnostic test. It is unlikely to solve your problem. Don't be disappointed when you find that nothing has changed after you complete it.

  The test is intended to determine if the problem is caused by a third-party software that loads automatically at startup or logon, by a device, by a police conflict or corruption of system files or some system caches.

  Disconnect all devices wired except those required to test and remove all the expansion cards from secondary market, as appropriate. Start in safe mode and log on to the account of the problem.

  Note: If FileVault is enabled in OS X 10.9 or an earlier version, or if a firmware password is defined, or if the boot volume is a software RAID, you can not do this. Ask for additional instructions.

  Safe mode is much slower to boot and run as normal, with limited graphics performance, and some things work at all, including an audio output and a Wi - Fi connection on some models. The next normal boot can also be a bit slow.

  The login screen is displayed even if you usually connect automatically. You need your password to log on. If you have forgotten the password, you will have to reset it before you begin.

  Test in safe mode. Same problem?

  After testing, restart as usual (not in safe mode) and make sure you always have the problem. View the results of the test.

• Cannot configure OfficeJet 6500 e710n-z on Macbook Pro

  Hello.

  For the last few weeks, I have been unable to print from my MacBook Pro OS X (10.8.5).  This has happened in the past and telephone technical support me delete printers of in meadows of system and update the printer drivers download from hp.com, that has been done (HP_Mountain_Lion_Ink_SW_v12.23.18.dmg). I also rolled power the printer (and crossed wireless configuration), router and Mac.

  However, now I am unable to add the printer through the system preferences | Printing & scanning.

  I went through the process of setting up the printer a couple of times, but am unable to ping to the IP address of my Mac. Unfortunately, when I print the wireless network test report, the IP address is 169.254.61.95.

  Any help will be greatly appreciated.

  Thank you.

  Thanks for the tips.  To resolve this problem, I found myself making a printer factory reset. I would setup wireless several times to try to resolve the problem, but up to what the factory reset was the unit wouldn't connect to my home network.

  I'm back running.

• MacBook Pro - display goes black

  I have a Macbook Pro 1 year.  At the start, everything seems normal. I put my password, the desktop appears briefly, and then it goes black.  It works fine on account of "safari only" invited.

  Any thoughts on the difficulty or trouble shoot?

  Thank you

  Stuart

  Try to run a secure boot by holding the SHIFT key during startup. The problem happens it so?

• Network with the MacBook Pro 15 "problems

  My new MacBook Pro (15-inch, mid-2015 retina) has 16 GB memory MHz DDR3.

  2.8 GHz Intel Core I & and an AMD Radeon R9 M370x PCie, in addition to an integrated

  Chipset Intel Iros Pro model. I am running OS X El Carolina Version 10.11.6, with 12 Parallels and Windows 7 for a few

  the company's programs, but I mainly work on the Mac side.

  An intermittent connection problem became constant after a week of using the computer.  My router DLink DSL (model 2750B) is two feet away from the computer.  In the system preferences / iCloud, I get "There was an error connecting to server Apple ID" my MacPro, iPad Samsung Galaxy S7 and Air 2 all connect with the same router wireless without any problem. (All my OTHER computers connected also with the same Apple ID and password without problem.  IMac 2012, MacPro, 2012 MacBook Pro, iPad 2 and the new iPad 2 Air)) I have a screenshot of the error message "None of your preferred networks are available" and in the same time to a list of all available networks, including my own.  Several times, I click on my network and get the response "the xxxxxxnetwork could not be contacted."

  I solved problem with Verizon, my provider, yesterday, and the routine test found that I have an intense tone, but the computer could not complete the test routine.  I ran "Diagnoses" several times this evening - this is after 23:00, and the report suggests that I will review wi - if recommended (fact), that I have a crowded WiFi channel (almost anyone else is in the building at this late hour) and I have to reboot the router (I did several times) and that maybe I should join a Wi - Fi network network that is associated with the Internet (like mine that works for all other devices.)

  Any suggestions on how to solve problems, or I would return the computer.  It's beautiful, and I spent a lot of time updating, installation, customization, before this stop of a Wi - Fi.  I had to buy a new router, but tests with Verizon made me doubt that a new router would solve this problem.

  Thanks for all the wisdom and strategies.  Maggie2012

  Hello maggie2012,

  Thank you for using communities of Apple Support.

  I understand your message that you are not able to connect your new MacBook Pro to your home Wi - Fi network. You did some great troubleshooting so far! I also recommend you to test the issue in Safe Mode and in an another user account on your Mac. The following articles will provide you with the steps necessary to test the problem in Mode safe and in another user account:

  Safe mode

  How to test a question in another user on your Mac account

  Best regards

• My early 2015 retina 13 '' Macbook pro intermittently "hang" on a wifi network in my house

  Problem: My early 2015 retina 13 '' Macbook pro intermittently "latch" on a wifi network in my house.  Which means, if I'm on my 2.4 GHz network, it works very well and then randomly - while remaining always connected to the wifi network - will lose its ability to connect what be it for 30 seconds to 1 minute. This occurs every 5-10 minutes. If I go to my 5 GHz connection, it works very well for 5-10 minutes. I keep having to switch back so that it could respond more quickly, or let them hang for a minute until he figures it by itself.

  Meanwhile, I can connect with my iPhone, Windows laptop, Xbox, computer, etc. without any problems. If I take my macbook in wifi areas, I have never run into this issue. I don't really know what to do, and faced with the conclusion this problem online - as it is a very specific set of variables causing problems.

  Please see recommended settings of WiFi routers and access Apple points.

  Despite these recommendations, some routers will work better with the latest Mac models if you turn the radio 2.4 GHz mode in settings and only use the 5 GHz. Note, however, that very old devices Apple and some third-party devices can then not connect at all.

  Some third party routers have advanced that you may need to change the settings:

  The encryption algorithm must be AES.

  The group key interval must be 3200.

  I can't give you specific instructions on how to change these settings, because all routers are different. Refer to the documentation for the provider.