Macro mode variable watch

Similar Questions

• How can I disable limited Mode for watching Youtube videos?

  How can I disable limited Mode for watching Youtube videos?

  You need the restriction code to disable restrictions.

  UPDATED - revised to include the correct article for Mac.

  OS X El Capitan: set up parental controls

• HP 50 g issues: scientific mode, variable mode, mode radian/degree

  I had a few questions about the HP 50 g:

  Is it possible to set up your calculator so that when it is in the fixed mode with 3 decimal places of precision, say that your number is greater than 10 ^ 6, which will automatically dilsplay the value like saying 1E6 rather than going out to write it in its standard form of 1,000,000? I ask precisely because a large part of the time that I face pressures in the metric system, which are in this range. The calculator from now displays a standard notation up to 10 ^ 11 then nothing subsequently goes into scientific mode for a response which is 1E12 and superior.

  How is it that when I graph the functions Y1, Y2, etc get put in the menu variables? Is it possible to disable this feature? Also random other variables are created with names such as: ZPAR, VPAR, IERR, etc..

  Y at - it a shortcut to switch between radian and degree mode as there is one to switch between the approximate and exact?

  Hi!, VitaX:

  You can configure everything, with the global variable, call the "BOOT", stored, in the HOME directory.

  See, the application... If it exists, the BOOT variable is evaluated when the warmstart calculator. Objects placed on the stack in the STARTUP routine cannot be should remain on the stack after the start of the calculator.

  Example:

  "3 SCI' 'START-UP' STO

  A request to Warmstart, with ONE + F3

  In the example, 10 ^ 6', you should see...

  1: 1, 000E6

  Or too, with a MENU...

  ' 63 MENU 11.1 KEYEVAL ' and store with any variable global name, e.g. "MNU" and STO.

  When you access the MNU, you see...

  now, if you need to change to SCI 3, set... 3, then press F3

  You can see, the result, id press TOOL (I) and MODE (H)

  

  Radian, degree and surprise, you can use...

  'MENU 65' and store, with any name. After you can see...

  change to another option, press button (F1,...)

  For, VPAR, see...

  

  For, ZPAR, see...

  

• blue screen after computer mode alarm watch

  Hello, I get a blue screen after waking up from my computer Windows 7 sleep mode.  The message isblue problem signature: problem event name: BlueScreen OS Version: 6.1.7601.2.1.0.256.48 locale ID: 1033 additional information about the problem: BCCode: 116 BCP1: FFFFFA80068823E0 BCP2: FFFFF880057E7394 BCP3: 0000000000000000 BCP4: 0000000000000002 OS Version: 6_1_7601 Service Pack: 1_0 product: 256_1.  Can anyone help?

  Hi Jaycee,

  Blue screen errors can occur if a problem causes Windows 7 to stop or restart unexpectedly. You might see a message that says: "Windows was arrested to avoid damaging your computer."

  These errors can be caused by hardware and software issues, and it can be difficult to solve the problem. The following methods and tools can often help get Windows running again.

  I suggest you remove all external devices except the keyboard and mouse and check if it helps.

   

   

  Please follow the methods and the update below us on the State of the question.

   

  Resolve stop (blue screen) error in Windows 7:

  http://Windows.Microsoft.com/en-GB/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Note: When you restore the system to a previous state, programs and updates installed later will be deleted.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  Warning: Before performing a reinstallation of Windows 7, should be prepared for the worst scenarios that led to your existing data on your computer being deleted. These data include data personal, settings, information about the hardware and software drivers. In case of a worst case scenario, you may have to reinstall all the programs. Make sure that you back up personal data to disks or other external storage devices before you reinstall the operating system.

  You can also download the last dump file so that we are able to help you. C:\windows\Minidump

   

  You can use Windows Explorer and copy the dump files to your desktop or your personal documents folder. Then download them to your Sky Drive folder.

   

  If you are not able to find the dump file, and then check if it has been activated. To so proceed as follows:

   

  a. click Start, point to settingsand then click on Panel.

  b. double-click on System.

  c. click on the Advanced tab and then click settings under start-up and recovery.

  d. in the Write debugging information list, click on image partial memory (64 KB).

   

  For reference:

   

  Send a copy of your dump file in a shared file on your disc of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  To change the folder location for memory dump files, type a new path in the dump file box (or in the directory of small box discharge, depending on your version of Windows). You can go through the link for more information

  http://support.Microsoft.com/kb/254649

   

   

  I hope that the information above helps you.

• How to view presentation in a narrative mode variable

  Is it possible that we can display the value stored in a variable of presentation in the narrative view guest?

  Hello

  Use this synatx @{PRESENTATION_VARIABLE} {'Default'}

  Kind regards
  Gianluca

• How to fix the error by calling the procedure that contains THE mode variable

  Hello
  
  I managed to create a procedure.
  create or replace procedure A_three_num2
  (n_1 number,
  N_2 number: = 2.
  n_3 number: = 3)
  as
  Start
  n_1: = n_2 + n_3;
  dbms_output.put_line (n_1);
  end;
  
  So I called procedure expects number 8 to display.
  Start
  A_three_num2 (n_2 = > 4, n_3 = > 4);
  end;
  
  But I got an error. Would you please help me understand the problem?
  ORA-06550: line 2, column 1:
  PLS-00306: wrong number or types of arguments in the call to 'A_THREE_NUM2 '.
  ORA-06550: line 2, column 1:
  PL/SQL: Statement ignored
  1. start
  2 A_three_num2(n_2=>4, n_3=>4);
  3. end;
  
  Thank you
  Guy

  Try this->

  set serveroutput on
  
  declare
    c_out number;
  begin
    A_three_num2(c_out,4,4);
    dbms_output.put_line('result is: '||c_out);
  end;
  

  Kind regards.

  LOULOU.

• I can't remove Flight mode of Apple Watch, need help!

  When I turn airplane mode on my iphone 6 does the same thing on Apple Watch (which is ok), but when I disable the airplane on the Iphone mode, Apple Watch keeps saying it is only locked due is on airplane mode, in other words, after you apply the change on the Iphone, Apple Watch does not change.

  I have to disable the Apple Watch and then be able to turn on normally, it works the first time, but I ran into a few cases I need to reboot twice. I'm sure it's a matter of buggy that apple will correct.

  In the meantime, I tried to set up a password (4 digits), however, I don't option on the Iphone app shows like turn off, when I try to drag him 'unlock iPhone' it won't work, also when I tried to drag on the "Simple Code" function it looks like fade. So I'm stuck right now.

  Can someone help me how to solve this problem? is this a bug or a faulty Apple Watch?

  Hi, Carlos

  What you have described is the correct behavior. It is possible to activate airplane Mode to be mirrored between the devices, but the same does not apply to disable the mode, which must be done separately on each.

  To change the setting for mirroring of the turn on airplane mode:

  -On your iPhone, in the application of Eve, go to: Watch My > General > airplane Mode - enable or disable the iPhone, to choose mirror.

  When the watch is in Airplane Mode, Bluetooth and Wi - Fi turned off, so there is no way for it to receive additional instructions from your iPhone (including a statement to exit the airplane Mode when the mode on your iPhone).

  To turn off the airplane on your watch Mode:

  -When you view the time on your watch, drag to the top of the lower edge of the watch face > drag left/right to the gaze of settings > press airplane Mode to turn off the mode > slide down on the screen to exit the looks.

• Bit variable information rate_Handbrake_Media

  If I think I hand a mp4 variable framerate, because of its characteristics of reading in the bosom of Premiere Pro.

  He played with MediaInfo as bit global debit mode: variable

  He ran constant Handbrake as framerate through

  imported again in first Pro and its characteristics of reading were good

  Watch a mp4 container exported from the hand brake as constant framerate always show in MediaInfo such as variable bit rate?

  I wonder why the mp4 I ran across of the handbrake as mp4 still consider variable with MediaInfo?

  In fact, I don't know how to operate MediaInfo

  Well, I guess is to check out in 'the tree mode' and made scroll to "video".

  in the tree the original mp4 seen as variable bit rate and Handbrake export seen as a bit of 'number' (constant) rate

  the original mp4 said constant framerate, but the flow is variable

  I see now MediaInfo shows mp4 Handbrake exported in the form of constant tree video degradation

• Missing audio in mp4 AAC made the files in watched folders

  With the help of 2014.2 encoding for the mp4 file coding in 4 different resolutions

  2 different HW systems - Windows 8.1 64, Intel i7, SSD, Nvidia SLI of GTX 780 x 2

  Records of watched configured with 4 different presets

  About 20 mp4 moved to looked at the file and waited for the caching is done

  After encoding the first 2 or 3 files are OK (in all 4 resolutions), but others have only 1/3 of the audio

  Cache cleared, moved to other video files to disk - no luck, the same problem - blocks, lack 2/3 audio

  This could be linked to the cache.problems?

  Entirely coded files have onle a pair of .pek and .cfa files

  Partial audio encoded files have 4-8 .pek .cfa files with extension _1 _2 _3

  Parameters of the sample source file:

  ==================== General =====================
  Format: MPEG-4
  Format profile: Base Media / Version 2
  Codec Id: mp42
  File size: 1.15 GB
  Duration (in ms): 25 min. 44 sec.
  OverallBitRate_Mode/String: Variable
  Total flow: 6 390 kbit/s

  ===================== Video =====================
  Id                          : 1
  Format: AVC
  Format info: Advanced Video Codec
  Format profile: [email protected]
  Use of CABAC: Yes
  Reframes: 2 pictures
  Settings - The format GOP: M = 4, N = 15
  Codec Id: avc1
  The codec info: Advanced Video Coding
  Duration (in ms): 25 min. 44 sec.
  Rate mode: Constant
  Bitrate: 6 000 Kbps
  Width: 720 pixels
  Height: 576 pixels
  Aspect ratio: 4:3
  Framerate mode: Constant
  Framerate: 25.000 fps
  Standard: PAL
  Colorimetry: YUV
  Colos space: 4:2:0
  Color depth: 8 bit
  Scan type: Progressive
  Bits /(pixel*Frame): 0,579
  Stream size: 1.08 GB (94%)
  Language: English

  ===================== Audio =====================
  Id                          : 2
  Format: AAC
  Format info: Advanced Audio Codec
  Format profile: LC
  Codec Id: 40
  Duration (in ms): 25 min. 44 sec.
  Rate mode: Variable
  Flow rate: 384 Kbps
  Maximum flow: 559 Kbps
  Channels: 2 channels
  ChannelPositions: Front: L R
  Sampling: 48.0 KHz
  Compression_Mode/String: lossy
  Stream size: 70.3 MB (6%)

  Example of setting export file:

  ===================== General =====================
  Format: MPEG-4
  Format profile: Base Media / Version 2
  Codec Id: mp42
  File size: 493 MB
  Duration (in ms): 26 min 14 s
  OverallBitRate_Mode/String: Variable
  Total flow: 2 625 kbit/s
  © TIM: 00:00:00:00
  ©TSC                        : 24
  ©TSZ                        : 1

  ===================== Video =====================
  Id                          : 1
  Format: AVC
  Format info: Advanced Video Codec
  Format profile: [email protected]
  Use of CABAC: Yes
  Reframes: 3 frames
  Settings - The format GOP: M = 3, N = 24
  Codec Id: avc1
  The codec info: Advanced Video Coding
  Duration (in ms): 26 min 14 s
  Source_Duration/String: 26 min. 14 sec.
  Rate mode: Variable
  Bitrate: 2 495 Kbps
  Maximum flow: 3 200 Kbps
  Width: 1 280 pixels
  Height: 720 pixels
  Aspect ratio: 1,944
  DisplayAspectRatio_Original: 1,945
  Framerate mode: Constant
  Framerate: 24,000 IPS
  Standard: PAL
  Colorimetry: YUV
  Colos space: 4:2:0
  Color depth: 8 bit
  Scan type: Progressive
  /(pixel*Frame) bits: 0.113
  Stream size: 468 MB (95%)
  Source_StreamSize/String: 468 MB (95%)
  colour_primaries: BT.709
  transfer_characteristics: BT.709
  matrix_coefficients: BT.709

  ===================== Audio =====================
  Id                          : 2
  Format: AAC
  Format info: Advanced Audio Codec
  Format profile: LC
  Codec Id: 40
  Duration (in ms): 26 min 14 s
  Source_Duration/String: 26 min. 14 sec.
  Rate mode: Variable
  Flow rate: 125 Kbps
  Maximum flow: 200 Kbps
  Channels: 2 channels
  ChannelPositions: Front: L R
  Sampling: 48.0 KHz
  Compression_Mode/String: lossy
  Stream size: 23.5 MB (5%)
  Source_StreamSize/String: 23.5 MB (5%)

  Cannot replicate the same problem with other compressors, as Sorensen Desktop 10

  Which is wrong with Adobe encoder 2014.2?

  Yes, full disc for temporary files is the only cause of audio missing

  Eliminated from the start, but still have the same problem on 2 systems with temporary SSDS (half full after batch catcing)

  Solution that works for me:

  1. open SOUL

  2. move control folder 20-30 files

  3. wait that all catches files (in "Adobe TRAN Files" folder is no file name long temp)

  4. open the file 'Adobe caught files' and run ' name: _1 GOLD name: _2 GOLD name: _3 GOLD name: _4 "about Windows Search. Select all and delete.

  5 clear trash (disc is full very fast)

  6. start encoding

  From my experience, while starting the encoding SOUL create only couple _1 versions of files in batch of 20-30, and so far, all have the sound

• Watch OS 3/iOS 10 - questions of the activity/Apple ID

  I have problems of synchronization of activity data / exercise between my watch (OS 3) and iPhone (iOS 10). I've tried several "fixes" such as;

  • update of switching to zero in Watch app > activity > progress updates on iPhone
  • Turning both bluetooth and wifi turned off, then turn it back
  • turn off both Watch and iPhone
  • put the watch and the iPhone in airplane mode
  • Watch coupling and iPhone (creating backup Watch) then re-pairing using the backup
  • soft reset on iPhone
  • hard reset on Watch

  don't know if there is a link but my Apple ID does not seem to be signature iPhone (Watch app > General > Apple ID) getting just the spinning loading circle

  don't know if there is a link but my Apple ID does not seem to be signature iPhone (Watch app > General > Apple ID) getting just the spinning loading circle

  See if the reset of your password Apple ID helps.

  You can reset your password when you access your Apple ID account page and click on password or login forgotten Apple.

• No function at Apple Watch

  I updated my watch the first night after new iOS was available. In the morning after that the clock operated a few hours, then he became black and had no function more since that time.

  I can't reset the watch and loading again presented without success. The back of the watch became hot after loading.

  Someone knows what to do?

  Thank you all!

  Hi Dirk

  It is possible that your watch is entered mode of power reserve, which is done automatically if the battery drops to a low battery level. In this mode, the watch can only tell the time (by pressing once the button). This is designed to keep this function available as long as possible when the battery is low.

  To turn back on your watch: press and hold the side button until you see the Apple logo and wait for your watch to restart.

  However, you need to charge your watch first (it will not restart until the battery is low). Try charging your watch for about 2.5 to 3 hours. It is normal to watch, adapter sector and charger become warm (but not too hot) during charging.

  More information:

  With the help of power reserve - Apple Support

  Check your battery and load your Apple Watch - Apple Support

  Keep Apple Watch in acceptable operating temperatures - Apple Support

• How to make the macro photography with a DSC-WX220?

  I have a new camera Cybershot. The DSC-WX220 and I am at a loss on how to put it up to take macro photos.

  Am certain someone reading this knows how little it is SONY ref manual, procedures and others.

  It's not like I'm new on camera. I am an 80 year old retired professional photographer.

  Any help is appreciated.

  Hello. Macro mode on the camera is automatic, so there is no particular setting to select. At the larger end, the camera will focus about 2 inches to infinity then until the end of the TV about 5 inches to infinity. This information is taken from the manual in full page 105. Hope that helps.

• RX 100 Macro

  1. how to access quickly the Macro mode?
  2. the auto focus is not available in Macro mode? The manual focus mode is a little confusing to use/then compose.
  3. can I assign my Macro mode settings for quick access to the Macro and then return quickly to my P mode?

  4. I have to say that the manual is terrible, and the generic videos are pretty useless. Sony should pay attention to users of this device very expensive, but sweet.

  Hi 986598-USER... I'm one of the trainers of digital imaging in the Canada, and I think I can help you with some of your questions.

  The RX100 is ideal for close-ups of the Macro and there are several ways you can do. Pardon my numbering scheme is not your questions...

  1. dedicated Macro Mode - spin mode selector t the SNA mode selection, then use the directional control up/down to search for the macro icon (little flower). Once selected, you will now be in fully automated mode designed to close.

  2. Macro switching fast - if throwing himself in the scene mode menu and find the macro is too many steps to quickly find the macro mode, you can easily assign your three custom modes of MR (memory recall), quick access to macro.

  To make this selection mode Macro, or set the camera settings however you prefer, then press menu and look in the menus of settings 'memory '. Select it and it will bring you to a settings screen black with '1', '2' and ' 3' at the top. These are your slots available for custom modes. Use left/right on the rear wheel controls to select 1, 2 or 3. Once you select the desired location, follow orders of the screen to confirm. Now the settings in that you compound will be saved in numbered MR slot you have chosen. To switch quickly between priority to another, such as P as you suggested, just rotate the above MR control dial and select the corresponding number and you're there.

  I find using custom modes of MR particularly useful when shooting with the auto HDR function or when using image effects. I prefer to shoot in RAW format, but the HDR and image effects must be in Jpeg format. Instead of having to go, in the menu to change the JPEG quality momentarily and then again for a quick shooting creative I dedicate a MR slot to do this. This way I can RAW, but if I want to take a quick shot with effects or HDR I just turn the stem of the wheel and turn quickly to M-priority where my choice of RAW is preserved.

  3. the RX100 is always in macro mode! -You can use the dedicated macro mode which increases the bokeh (background of-focus) effect, but this mode is automated for opening/shutter and ISO. I would like to have full control over these exposure settings when I shoot so I shoot most of my stuff in macro manual priority or shutter priority. With an incredibly short development of 5cm, it is the wider focal length the RX100 is able to shoot macros fabulous in any mode you choose. It is designed to attract basically, dedicated macro mode is only a quick guide with some automation. Try to get close in P mode and see what you get!

  4. disorientation MF Assist mode - it is a very useful feature for the fine development, but when you are already very close, when the pleasure that it can a little difficult to 'see' what you are framing. You can disable this tool by entering you menus and by disabling 'MF Assist.

  5 AF in Macro mode? -Yes, the dedicated Macro mode is always with autofocus. If you shoot in P, A, S, M, you can enable or disable the AF options. I prefer to use M or S with active DMF. Direct manual focus is the best of both worlds... it gives you of AF, but also allows you to refine the results before pressing the shutter button completely. So, you get the convenience of autofocus, but can also add personal control to refine your focus by simply adjusting the front control ring. It's different than standard AF because the lens decides what is right downtown, and causes any attempt to manually change the lens fight your setting to refocus its ideal point. The AF is really good, but sometimes he needs a little help and with DMF, you have all the control.

  I hope that some of this aid... Sorry if it was a bit of reading. Please let us know if you have any questions about what I said!

  Now, get out there and shoot a few macros!

• Take a picture with Z3 macro?

  Hello.

  How to take a photo close-up with Z3?

  Hello and welcome to the community! Since you are new, please make sure that you have checked our Forum.

  As far as I kniw, there are no parameters to the macro mode. If you use the superior auto mode, it will automatically use it.

• new ICS updates not macro in the camera settings

  Hello to all I just got updated to new ics 4.1(b)(iv). 0587

  My problem first thing im not getting parameters macros in in camera setiings necessary must focus mode.

  Second thing clear black isn't here. You don't see clear black on setiings menu or in the home menu screen.

  Response to touch all the app is faster good müsch, compared to the earlier.

  see how many of you like new ics thanks sony trying to solve my problems above.

  have you tried focusing on small objects in a scene auto mode? It may take some time to focus and recognize the scene.

  also a way to test the features of the macro mode is to try a barcode scanner app,