Bit variable information rate_Handbrake_Media

Similar Questions

• How send/read bits of information through visa

  Hello people.

  I bought an encoder that reads a tape of datamatrix and returns information such as x and y position and speed. It communicates via serial 485 and I need the control trought labview, I don't know how to do this. The communication protocol is to send a telegram of the request and received a telegram in response.

  To send the request telegram has 2 bytes: one containing 8 bits of information plus one parity bit another byte has the parity bit and the same 8 bits of data in the first byte, but here they are reversed. For example octet1 is 110000100 and octet2 101111011 (it takes x position)

  The answer telegram contains 6 to 9 bytes (all have 8-bit, plus the parity bit). The 2nd to 5th byte contains the x position, so I need to read and convert to a decimal number.

  The issue is that visa works work with strings, so I don't really know how to properly convert the information of these 2 bytes to send the request, nor how to convert the string read from the instrument to the binary number and finally to decimal. Do you have any idea?

  Greetings,

  Vitor

  Vitor Soares says:

  I did the two arrays of bits, one for octet1 and one for octet2 and diverted these channels to channels and concactenated and sent to the encoder, but I got no response... I'm on the right track?

  Partially. It is a frequently asked question. You need a single table of U8, containing the 2 bytes you want to send and then you can simply use Cast to Type or an array of bytes to a string for a string that you can subscribe to Write VISA.

• Variable information from the Captivate .swf 8 integrated and vice versa

  Hello

  I use 8 Captivate and created a game in Flash with AS3.  I will have NO problem running commands from Captivate embedded Flash file, using the syntax:

  MovieClip (this.parent.root) .rdcmndNextSlide = 1;

  However, whenever I try to import or to export values for the variables defined by the user or even predefined such as cpQuizInfoPointsscored variables, the values do not translate back.  I tried using the same syntax as above to set the value of a variable (for example MovieClip (this.parent.root) .cpQuizInfoPointsscored = 20;).  Similarly, I tried to display the value of a Captivate variable inside the Flash file by setting an equal to the set value Captivate dynamic text field.  In the first case, nothing happens; in the latter case, the text field displays "undefined".

  I have not seen a post about this particular problem.  Any ideas on what I am doing wrong?  Or is that what I try to do possible?

  Thanks in advance for any thoughts.

  Look in the category film control: these can be changed (some examples are cpCmndMute, cpCmndCC).

• How to display 16-bit RGB information?

  I use Photoshop CS4 v 11.0.  I opened a .tif that is 16-bit RGB.  Photoshop recognizes as 16 bits.  The tab on the image says RGB/16 *. (I do not understand the asterisk)  Image > Mode confirms that it is of 16-bit/channel.

  However the info panel shows that the values of RGB 8 bits (0,255). The Panel options include a bit of depth of detection.  How can I see the RGB values, perhaps (0,32767), image .tif using Photoshop?

  Simple answer-in your info panel, there is a small pipette beside RGB values. If you click this it gives you different options. Including the ability to read 16-bit values.

• variable information in an excerpt

  I don't know I have fully "get" the concept underlying the new feature of the code snippet in RH7. I understand the part about how they are reusable blocks of text you can create once and insert in many places. It's logical, but I rarely understand * exactly * the same block of text in several places. I do, however, is to include very similar instructions in many places. The steps vary slightly depending on the subject. In other words, the "Creation of X" section includes the numbered steps to configure X. the 'Creation of Y' section includes the numbered steps to set up there. and the section titled "Creating Z" includes numbered steps of configuration z except for names which is created (X Y Z vs. vs), the steps are the same.
  
  I was hoping to use a snippet of text topics X, Y, Z that is identical (most of it), then the insertion sort a variable in the snippet that would change x to Y to Z, depending on the subject. This can be done?
  
  
  
  

  That's what I'm thinking.

• I can't save the information on universaljobsmatch

  Cannot save actions on mobile phone

  Can you give a bit more information for us people of SUMO can understand your problem and give you a solution

  Thank you

• Problems with the use of variables at the time of the SV - Loudness.vi

  Hello

  I'm rather new to Labview and will have questions, get my Time-Varying Loudness calcuations out correctly. Attached is my current VI and a .csv file of my data set (calibrated in PA. sampling frequency = 50 kHz for 5 seconds). It does not produce what I expected when I run the VI. Here are my questions:

  Time-Varying Loudness:

  (1) what are the signals so much? There are hundreds of lines, but I only expect one.

  (2) why my category axis are not a range from 1 to 24 years as bark should be?

  1/3 octave Band Analsysis:

  (1) why is it incorrect? Them should not be a linear increase the frequency...

  Data on the one hand be hurry and make a squeek. It is a transient noise that happens about 2 seconds. But, how could I go do a waterfall (Time (s), Frequency (Hz), Amplidtude (sones)) of this signal? Is there an easy way? or do I have to do all three signals and add to make a parcel?

  Thank you very much for your help! Let me know if you need more infromation,

  -Troy

  p.s. I have included a picture of the results as well.

  Hi Troy,

  (1) the SV specific volume VI 'chunks' given in blocks of 2 ms and returns then these as individual plots specific Loudness vs. Sone.  The colored lines that you see in your chart are representative of the 2 500 2 periods of time ms in your acquisition of five seconds.  Each of these plots contains 241 points, however they are ten sample "gradually", one for each sone.  The digital filter buffer takes a bit to fill and kick in properly, however, so you can give your first rows (0-. 02 seconds or more) scrutiny before using them - you can see a number of unexpected zeros around the lower sones.

  2) since you use a chart, the x-axis will be increments every race following (the previous data is stored.)  If you only want to display the most recent data, I would recommend switching to a chart, which is found in the chart controls palette.  Also, see above (#1) why the x axis are longer than 24 points.

  (3) remember that dB is a unitless measure and cannot be used in reference to another value. A typical reference for sound is 20 uPa, but you will probably need even out your data entry and determine/set dB reference.  You can take a look at the voltage from the snout to the Cloaca EU.vi scale (EU means equalized units) and from the snout to the Cloaca Set dB reference.vi.  In your case, I think the plot of Octave shows your dB from a default value of 1.  The values should be accurate with respect to the other, but you must provide a reference value to calibrate the scale.

  (4) I think that this VI is a good example how to do to create a cascade:

  Display cascading for Octave (DAQmx)

  http://zone.NI.com/DevZone/CDA/EPD/p/ID/5562

  You will need to break up of your waveform into pieces, just like the specific volume VI, but the basic concept is roughly the same (take piece of waveform, take octave measure of the piece, add octave output measure cluster to cluster table, repeat for the rest of the waveform display)

  Phew!  It was a bit of information.  Let me know if this makes sense and don't be intimidated by the detail and/or unknown functions or methods - you're definitely on the right track, or to ask it to at least the right questions.

• Shared library error Variable deployment-2147220735

  I had to reinstall my whole LabVIEW installation, where my SSD was about to fill. I uninstalled everything and freshly installed everything on a larger hard drive. Unfortunately, I now get an error message and am wondering what I have to reinstall.

  When I want to deploy a library shared in LabVIEW 2014 32-bit Variable, it returns an error:

  Initializing...
  Calculating dependencies...
  The checking for conflicts. This may take some time...
  Prepare the items for download. This may take some time...
  My computer deployment
  Deployment deployment test.lvlib\\10.0.10.45\test failed (error:-2147220735, MAX: internal error (Hex 0 x 80040301): the specified class is not found in the configuration database.) Your installation may need to be repaired.).
  Completed with errors of deployment

  

  Any suggestions?

  Have you tried a repair, which sometimes works but sometimes a completely uninstall and reinstall is necessary. Have you tried to repair only the proposed below KB file?

  http://digital.NI.com/public.nsf/allkb/67E896D850D988C286257811005FEFF5?OpenDocument

  As you can see the same error in Distributed System Manager the quickest solution would probably be to uninstall LV and the drivers and reinstall them just. If the KB above does not work.

• Problems of DxDiag in 32-bit mode

  I have Windows 7 Ultimate 64 - bit edition, Intel Q6600 CPU processor and a VGA Nvidia GeForce GTS 250 card.

  When I run DxDiag, I get a long list of windows error, including:

  Error: Could not get basic display info

  Error: Could not get sound warnings

  Error: Problem getting view info

  And about half a dozen more. When the DxDiag screen appears in fact, it does not my information system display. However, once I hit "Run DixDiag 64-bit", it displays correctly so all of my information.

  The problem is that I was trying to play GalCivII and it does not start because my "drivers are out of date" or something in that sense. (Which are not). When I read the debug file, it shows the following:

  Debug message: Version v2.03 Twilight of the Arnor last updated the: Wed Jul 23 11:47:38 2009

  Debug message: DX Version checking.

  Debug message: * DXDiag info follows.* *.

  Information system

  Time: 06/06/2010, 17:07:42

  DirectX version: DirectX 9 .0c (4.09.0000.0904)

  Machine name: CORTANA

  Operating system: Windows Professional (6.1, Build 7600) (7600.win7_gdr.100226 - 1909)

  Language: English (regional setting: English)

  System manufacturer: system manufacturer

  System model: System product name

  BIOS: Phoenix - AwardBIOS v6.00PG

  Processor: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz (2 CPUs)

  Physical memory: 4094 MB RAM

  Page file: 2308MB used, 5878 MB of available space

  Windows Dir: C:\Windows

  And then it will display some of my video card information. I currently have DirectX 11 (according to DxDiag in 64-bit) and Windows 7 Ultimate edition. Thus, the debug file looks like it's reading my 32 bit DxDiag information, that is incorrect or does not exist. Any ideas how to get this working?

   

  Thanks for any help you can provide!

  I just noticed your BIOS is the same as mine and that your Q6600 is listed as having only 2 CPUs. Although the Q6600 is listed as not supporting Hyper-Threading technology, Hyper-Threading should be enabled in the BIOS to use all four cores in your CPU. I have a Q6600, ASUS P5N - D motherboard, two 9800 GT video tips and encountered the same problem. I need activate the Hyper-Threading technology get mine to work well.

  ------------------

  Time of this report: 06/06/2010, 20:40:56
  Computer name: GEORGE-PC
  Operating system: Windows 7 Home Premium 64-bit (6.1, Build 7600) (7600.win7_gdr.100226 - 1909)
  Language: English (regional setting: English)
  System manufacturer: system manufacturer
  System model: System product name
  BIOS: Phoenix - AwardBIOS v6.00PG
  Processor: Intel (r) Core (TM) 2 CPU Quad Q6600 @ 2.40 GHz (4 CPUs), ~2.4GHz
  Memory: RAM 8192MB
  Available OS memory: 8190MB RAM
  Page file: 2224MB used, 22329 MB of available space
  Windows Dir: C:\Windows
  DirectX version: DirectX 11
  DX setup parameters: not found
  DPI setting: Using System DPI
  System DPI setting: 96 DPI (100%)
  DWM DPI Scaling: disabled
  DxDiag Version: 6.01.7600.16385 32 bit Unicode

• HP Desktop mastering Pegatron Truckee MB SLI with GTX 680 Information

  I just wanted to post this bit of information to you about weather SLI will WORK with HP desktop or not.

  I noticed through the forums on the web and even after having talk with several personal customer support at HP that some say SLI was possible on HP desktop computers and other said that it was not I've talked 4 different HP capacity SLI employee and they have all said that it works on HP desktop even after having them reassures me over and over again.

  I'm here to tell you I gave a test with two EVGA GTX 680 in my HPE-490 and it does not work... the computer will recognize the two cards and allow you to use one as a main card and another form of physx card but the "SLI" option is never accessible to the general public in the same nvidia Control Panel after the graphics card driver update and reset the bios of the motherboard... also tried three different bridges SLI make sure that the bridge was not defective... but these two cards have worked in SLI, immediately after their installation in my computer self built Sandybridge brother.

  Currently I use an EVGA GTX 680 FTW and an OEM GTX 460 as a card... let physx I also tell you that if you decide to use twp graphics cards (one for the card other hand physx) that you need to put your main in the top slot graphics card and the physx card into the slot in the bottom... the motherboard will default to read the top slot as the main Board if two cards are plugged on it in order to make this work you have to do it like that.

  Some of you are probably wondering how can I adapt this in a HP desktop environment... Let me tell you, it's a very tight fit and I had to cut away some of the guts of the computer to make it fit.

  The GTX 680 has been incredible, but there are a few quirks, you must be aware of the especialy if you try to put one of those cards in a computer with not much airflow... these cards will be truly downclock, which can adversely affect performance if hit 70 degrees temperature... so you'll have to add some case fans to blow on the cards (like me) or remove the side panel to allow more fresh air in the case after that I'm ideling at 36 ° c with my two GTX 460 and GTX 680 games I stay less than 62 degrees because I have an aggressive profile fan put in place in precision X keep this way some of you are probably thinking cards will get really strong when you do but as long as you take a 680 GTX which uses the type of spare parts / fans is not a problem... the GTX 680 FTW model uses a quiet fan, which is not unpleasant to blow to it's max, but I also used a stock GTX 680 and it was a little hard to do and the GTX 670 is even stronger running full tilt.

  I wanted to just send you this information in the hope that it may help someone make sure that if you get a card 600 series to improve your diet for a beautiful 650 watts or under power with at least 38 amps on the rail... I recommend the Corsair HX650.

  Happy gaming.

  I got this figured out. They bother running to the PCI-E 2.0X16@16 2.0 as they should.

• I want to run "cardfile' of windows 3.1 days in 64-bit Windows 7

  Yes, I always use cardfile from the days of win3.1. I have years of numbers and bits of information. I think that this is a 16-bit program? Any ideas other than to start over?

  16-bit programs do not work in 64-bit systems.

  List of limitations in 64-bit Windows
  http://support.Microsoft.com/default.aspx/KB/282423#appliesTo

  Some 16-bit DOS programs and the command prompt does not work in mode full screen in Windows Vista and Windows 7
  http://support.Microsoft.com/kb/926657

  32-bit and 64-bit Windows: frequently asked questions
  http://windowshelp.Microsoft.com/Windows/en-us/help/41531554-d5ef-4f2c-8fb9-149bdc5c8a701033.mspx

  You may be able to use a Virtual Machine solution that allows you to run XP or earlier systems.

  Windows Virtual PC
  Download Windows XP Mode
  http://www.Microsoft.com/Windows/Virtual-PC/Download.aspx

  Windows XP Mode (Windows 7 only, but not one of the Home versions) "you are not eligible to download Windows XP Mode. You must have Windows 7 Professional, enterprise or full to run Windows XP Mode."    If you have an old XP CD (or other older Windows CD) available you can simply download the Virtual Machine and spend the XP Mode download.

  This warranty covers the gambit set of VMS in the 'Home' versions if you want to have a look.  Of course you will need a licensed copy of XP to install and run in any of them (except XP Mode).

  VirtualBox is an impressive VM competitor
  http://WindowsSecrets.com/search/?CX=017937947691920082874%3A_ilcm6kdy_y&COF=FORID%3A11&q=VirtualBox+is+an+impressive+VM+contender+&SA=search&advWS=1&advSAN=1&advPages=15

  If you have an XP Cd, you can even consider a Dual Boot configuration.

  See the SECOND METHOD.  When Windows 7 is installed first

  How to make a Dual Boot Installation with Windows 7 and XP
  http://www.SevenForums.com/tutorials/8057-dual-boot-installation-Windows-7-XP.html

  A (minor) bug experienced with dual boot XP with Vista or Windows 7, is the loss of system restore points in other operating systems after every start XP.

• IE9 32 or 64 bits?

  Hello

  How will I know if I execute the 32 or 64 bit IE9. I've been about IE9, and I don't see that particular bit of information.  Any suggestions?

  Thank you.

  Run IE9 and go to the Task Manager.

  If iexplorer.exe has a * 32 written on its side, then you use the 32-bit version of IE9 64-bit also.

• How to edit photos and save a file in 64-bit

  OS X Yosemite 10.10.5, iMac, 3.06 GHz. core 2 duo, 8 GB 1067 MHz DDR3, ATI Radeon HD 4670 256 MB. End of 2009 build

  Photoshop CS6 extended to 13.0.4

  "I checked 'About this Mac' is 64-bit.

  Check Photoshop "is 64 bits"

  Why can't edit photos and then save in 64-bit? 'MODE' selections show the 8, 16, 32 Bit. Now 32 bits went in the way of the DODO Bird all my plugins accept 16 or 64 32-bit not. Save my files under "Tiff files" or photoshop files

  I'm guessing that my graphics card may be the culprit. If so this can be improved?

  Personally, I'm computer illiterate, so I ask you to keep the simple answers please if possible.

  Hello

  Bad compared to the other forests.

  As you said that your mac is 64-bit, which is actually the CPU of the machine a structure bit of the architecture of the operating system.

  When you say that photoshop is 64 bits, which means that there is a 64-bit architecture, which will move into a single 64-bit machine it is what your MAC.

  Now, when you say on the image mode which has nothing to do with the architecture of the operating system or photoshop, it's the bits/channel information.

  And now photoshop can record up to a maximum of 32 bits/channel.

  So you don't have to worry about this.

  Your graphics card is not guilty.

  ~ Jitendra

• Convert a sweep of 16-bit grayscale tif to DNG and getting 48-bit RGB?

  I have scanned hundreds of old black and white negative using Vuescan to TIFF 16-bit grayscale. If I open in Photoshop CC2014 the tab indicates that they are a single 16-bit grayscale channel. But if I have Lightroom convert them into DNG and then open them in Photoshop, they appear as 48 bit RGB or three 16-bit RGB channels. The three channels are identical. What happens here? Is it only returned as a 48-bit RGB or the DNG image byPhotoshop to store the RGB image? The DNG format is not much bigger than the TIF, so it doesn't seem to be store 48 - bits of information. I lose all the data on your way to the DNG format with a scanning in grayscale?

  Given that I can export the DNGs to a tif and it refers to a single channel 16-bit, I suppose I don't lose all the information, but I'd rather not use DNG for scans in grayscale? Or should I edit in Photoshop with the three RGB channels on and understand that I am change the grayscale channel should ever export back to tiff?

  It seems at least that there is a gap in the rendering of the shades of gray DNG in Photoshop?

  I think that the best way to answer here is to explain my own workflow.

  I have to be a little brief: it's getting very late, and I start tomorrow a roadtrip of six weeks.

  I do a lot of work with TIFF scanned, and it never occurred to me to convert to DNG.

  I start with rough tonal corrections, noise reduction and retouching in PS and then import the image (with all the shadow and highlight details present) in LR.

  Here, I'm very good tuning and capture sharpening, but sometimes the image must return to the PS for editing. I use then change the Original and the image opens grayscale in PS. After check-in PS, I click on the exclamation mark on the thumbnail and choose import disk settings and updates to images in LR.

  Given that I find the release of LR sharpening unsuitable for scanned images (it's probably optimized for digital capture), I export a new LR tiff image, open it in PS, conversion of RGB to grayscale and use Smart Sharpen for output sharpening. I wish you that LR could export in grayscale, but I've learned to live with it. You could easily implement an action of conversion in levels of gray (and 8 bits) and use it regularly.

  My knowledge of the technical aspects of the dng files is limited, but my impression is that they are files in grayscale, which explains the small size of the file.

  The color is added in the process of deconvolution in LR.

  I do not think that your workflow with convertin to DNG will affect the quality, so stick with it if you wish.

  I gladly carry on this discussion, but since I'll be on the road, you answer could take some time.

• installation of 32-bit client 12 c YES-10151

  Hi Forum, I installed the new server database oracle 12 c (x 64) on Windows 7 (x 64) operating system. When I try to install the Oracle client 12 - to 32 bits in the same machine, the installation, I get the following error: "YES - 10151:There was an error loading library: ntActionLib" however I could install the client for 32-bit 12 c in Mode InstantClient (214.0 MB)! but I can't install it in Runtime (735.0 MB) mode. My basic oracle: My Oracle Home "C:\Oracle\base": "C:\Oracle\base\product\12.1.0\dbhome_1" it is worth to mention that I installed the db server and the 32-bit client under the same roof of oracle! All advice is appreciated. Thank you

  I managed to solve the problem by performing the following tasks:

  1. install the 32-bit client in an another oracle_home rather than db oracle 64-bit server.

  2 set the oracle_home to 32-bit variable

  3 - update the windows path variable and replace the bin folder home of oracle with the binary 32 bits. (for example, path = path; C:\oracle\base32bit\product\12.1.0\dbhome_1\bin)

  4. open the sqlplus and sign in using this connection string: sqlplus user/password@dbname example sqlplus admin/123@orcl

  Note that, when you stop and then start the listener to oracle db server, change the oracle_home to 64-bit (set oracle_home=C:\oracle\base64bit\product\12.1.0\dbhome_1)

  I hope this helps someone else.

  Concerning