MAF: Unable to create the device

Similar Questions

• "Unable to create the virtual SCSI device to the scsi: 0:0" import *. EGGS in ESXi 5.1u2

  Hi, I need to deploy a VM of *.ova in my cluster with 5.1 ESXi hosts u2 (1900470), but when I try to run it I get this error:

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/51e7fc6b-85806744-fb38-0021286bb22a/xxx.vmdk'

  Unable to create the virtual device. Stack 16 or 255 sectors per track is not supported.

  
  

  The same deployment works in another cluster with 5.1 ESXi hosts (700733) and on my vmware workstation 10.

  I have tryied compatibility material upgrade\downgrade with wmware workstation and download directly to my host but still do not

  I formatted the hard drive hard by ssh and readded to the inventory, I tried to convert vm to work cluster... nothing to see...

  Any suggestions? Thank you

  Solved! I don't know why but the import of virtual machines with 5.1u2 ESXi, heads, and sectors in *.vmdk file are reversed:

  BEFORE:

  ddb.geometry.biosHeads = "16".

  ddb.geometry.biosSectors = "255".

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "255".

  AFTER:

  ddb.geometry.biosHeads = "255".

  ddb.geometry.biosSectors = "16".

  DDB. Geometry.Heads = "255".

  DDB. Geometry.sectors = "16".

  Connect to a host with SSH and editing *.vmdk file with VI will be the virtual machine starts without problems!

• Unable to create DirectX device

  I used to play 'FREECELL' until I finished the game I left for a few hours and when I came back to my computer, there was an error that says error: unable to create DirectX device. I closed the error box and everything seems to work OK.

  Hello

  I had the same problem until I uninstalled a program to screen saver

  Hope this works

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• SyncToy 2.1 has stopped working, with the message "unable to create the folder pair. Unable to create the provider. Can I get help to fix it please

  After the last automatic update, I tried to back up my files (did this every week for at least one year). Message "unable to create the folder pair. Unable to create the provider"came. I tried again, same. The pair and tried to reset upward. Same message... anyone have an idea how to fix?

  Hi Steve,.

  The question you have posted is related to SyncToy and would be better suited in the SyncFX - SyncToy community. Please visit the link below to find a community that will provide the support you want.
  http://social.Microsoft.com/forums/en-us/SyncToy/threads

  Hope this information helps.

• VDDK v1.2 is unable to create the disc on the other file system

  I work on one file system other than NTFS for Windows and should be able to create a virtual drive it.

  Using the new v1.2 VDDK, I try the following command:

  VMware-vdiskmanager - c - a free - 0 TS 70 GB
  .pdvfs\myserver\2\CarlData\CarlData.VMDK

  It fails with the error:

  Unable to create the disc: the file is too large for the filesystem (0xc00000015).

  With the help of the utility even 1.1 VDDK works very well.

  If I map the 'share' to a drive letter, the next command in the V1.2 works too well:

  VMware-vdiskmanager - c - a free - 0 TS 70 GB Q:\2\CarlData\CarlData.vmdk

  I know from painful experience last year that the error "the file is too big" is pretty generic, and generally means vixdisklib think that the target file system is not NTFS.  I changed my driver year last to convince vixdisklib v1.1 it was OK to create a large virtual drive here.  "I also remember that the library is the distinction between a target name starting by".
  "compared to the other with a drive letter.  "Is there something I can do to make the v1.2 to accept the"
  .pdvfs' form of file name?

  I see a sensitive case named streams, acl persistent search for support as defining NTFS for this audit. Can you confirm if you have these?

  Thank you

  Annick

• Unable to create the virtual disk: fault. RestrictedVersion.summary

  Hello

  Im trying to create a virtual disk using the CLI on ESX4i.  The script is:

  vmkfstools.pl - Server 10.190.2.51 - c 20 g d eagerzeroedthick - a free /vmfs/volumes/Internal/test.vmdk

  When the script runs I get error: unable to create the virtual disk: fault. RestrictedVersion.summary

  Can someone tell me why please.  Im trying to create a disk of 20 GB with adapter free with eagerzeroedthick on my internal called storage, (no subdirectory).

  The file system is THAT VMFS 3.33 maximum file size is 256 GB.  The block size is 1 MB.  If it is the block size that is the problem how can I easily change?

  It's in a laboratory, not a production environment.  I need the flag eagerzeroedthick like Im trying to create a passive active cluster node MSCS 2 on a single physical node with 2 machines VMS.

  Thank you.

  Mike.

  If you use the free version of ESXi (U4 and later versions), access to tools like the VIMA API are read-only.

  -Matt

  VCP, vExpert, Unix Geek

• R12 rapidwiz error on node2 - AC-00002: error: unable to create the log file

  Over multiple node R12 on Enterprise Linux 4 installation fees. below error is encountered on node2
  
  AC-00002: error: unable to create the log file
  The installation was successful on the database node and the main node of the Application. On the primary Application node only ' lot
  
  Treatment services are enabled.
  
  However, when installing on the application additional node the rapidwiz is errors
  
  "AC-00002: error: unable to create the log file - $INST_TOP/$CONTEXT_NAME/logs/12202114.log.
  Exception in thread "AWT-EventQueue-0" java.lang.RuntimeException: AC-00002: unable to create the log file.
  $INST_TOP/$CONTEXT_NAME/logs/12202114.log
  
  I tried to install several times but every time it failed with the same message
  
  I think that the reason for the failure:
  
  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:
  
  -rw - r - r - 1 person person 0 20 Dec 10:59 abc
  
  I mounted node2 successfully using
  Mount-t nfs nas1: / erparch /erparch
  
  Rapidwiz version is 12.0.0.20
  
  What are the steps to take in order to proceed with the installation on the second node.

  user10126380 wrote:
  I think that the reason for the failure:

  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:

  -rw - r - r - 1 person person 0 20 Dec 10:59 abc

  I think you've correctly identified the source of your problem. By default, the NFS mounts are usually created with the 'root_squash' option, where the user root on a remote system creates its files as the anonymous user ('nobody' in most cases) on the exported NFS volume. It is usually a good practical security; However, in your case, you need to export the NFS volume with no_root_squash to allow the user root on Node2 to create files as expected when you run RapidWiz. Once installation is complete, you should be able to go back to using the default root_squash option, as the following files in the filesystem level of demand will be created by non-root users.

  Your system administrators may not be happy with the idea of an export of no_root_squash, and I wouldn't blame them. :-) If there is dispute, make sure that they understand that it is only for the duration of the installation of the EBS, and she can (and should) be powered once the installation is complete and verified to work.

  These two articles offer a brief explanation of the purpose and value of the NFS mount root_squash/no_root_squash export options.

  Kind regards

  John P.
  http://only4left.jpiwowar.com

  Published by: jpiwowar on December 21, 2009 21:38

• import problem ORA-01658: unable to create the STARTING point for the segment in your

  I created the above tablespace
  
  create tablespace SAMPLEDATA
  DataFile ' / u01/app/oracle/oradata/sample/sampledata01.dbf' size 50 M autoextend on next 10 M maxsize unlimited
  logging
  Local extended management
  segment space management auto
  Flashback on;
  
  create SAMPLE user identified by usrmringnew
  SAMPLEDATA default tablespace
  tablespace temporary temp;
  
  
  Import from 9 to 10r2
  
  IMP fromuser = touser = sample indexfile=/home/oracle/import/production/export/import_productionddl_20081007.log file=/home/oracle/import/production/export/production_export_20081007.dmp log=/home/oracle/import/production/export/production_import_20081007.log production system
  
  Unfortunately, it gives the error
  
  ORA-01658: unable to create the measure INITIAL segment in tablespace
  
  could someone kindly help me on this?
  
  Thank you very much!

  Hello

  As you can see, your data file specifications need to increase of 10 M, but your file system has only 3.7 M of available, that is why the server is unable to increase the size and you get this error message.

  Solution - you can use one of following:

  1. move the data file to a point of editing with sufficient space.
  2 - Add a new data file for the tablespace and host this data on a new mount point file with sufficient space.

  Published by: sanjayIndia on October 8, 2008 09:02

• Unable to create DirectX device on some computers. The error code is D3DERR_NOTAVAILABLE.

  I'm sorry if this post is not in the right place, or if it is a duplicate. I couldn't find help anywhere for the problem that I am facing.

  I worked for a few days now trying to get a DirectX control to load on some computers in my organization. The code we have written works fine on some machines (perhaps 50%), but fails to initialize DirectX during the creation of the unit on others machines with an exception containing the code of error D3DERR_NOTAVAILABLE. We use the DirectX 9 SDK for development. We did ensure that the DirectX (version 10) runtime is installed on the computers of problem as well (we believe that the runtime must be backward compatible). I wrote the code to attempt to create a device using all possible combinations of the available settings and still no device can be created! The code I used to try to find any working device is less. I'm doing something wrong? Code (written in c#) starts in the InitializeGraphics() function and calls the GetAcceptableDevice() function. The GetAcceptableDevice() function returns zero on our computers of problem:

  private GetAcceptableDevice device (DeviceType deviceTypes, Format [] backBufferFormats, DepthFormat [] depthStencilFormats []) {}
  List acceptableAdapterFormats As new List();
  {foreach (adapter AdapterInformation in Manager.Adapters)
  {foreach (DeviceType deviceType in deviceTypes)
  {foreach (backBufferFormat in backBufferFormats Format)
  Now, make sure that the depth buffer meets one of the required formats.
  {foreach (DepthFormat depthStencilFormat in depthStencilFormats)
  PresentParameters pp = new PresentParameters();
  pp. AutoDepthStencilFormat = depthStencilFormat;
  pp. BackBufferCount = 1;
  pp. BackBufferFormat = backBufferFormat;
  pp. BackBufferHeight is this. Height;
  pp. BackBufferWidth is this. Width;
  pp. FullScreenRefreshRateInHz = 0; Must be 0 in windowed mode.
  pp. DeviceWindow = this;
  pp. DeviceWindowHandle is this. Handle;
  pp. EnableAutoDepthStencil = true;
  pp. ForceNoMultiThreadedFlag = false;
  pp. MultiSample=MultiSampleType.None;//Anti-alias settings
  pp. MultiSampleQuality = 0;
  pp. PresentationInterval = PresentInterval.Default;
  pp. PresentFlag = PresentFlag.None;
  pp. SwapEffect=SwapEffect.Discard;//Required to be scrapped for anti-aliasing.
  pp. windowed = true; Must set to true for the controls.
  Treatment of vertex createFlags=CreateFlags.SoftwareVertexProcessing;//Software CreateFlags should always work.
  Device functionalDevice = null;
  try {}
  functionalDevice = new device (adapter. Adapter, deviceType, createFlags, pp);
  Return functionalDevice;
  } catch {}
  Just skip it and try the following.
  }
  }
  }
  }
  }
  Returns a null value.
  }

  public void InitializeGraphics() {}
  Device = MakeBasicDevice ();
  {if(Device==null)}
  Device = GetAcceptableDevice)
  DeviceType.Software is rarely used. DeviceType.NullReference produced a device, on which you can not attract.
  New DeviceType [] {DeviceType.Hardware, DeviceType.Reference},
  All display formats listed on in the case where we want to try them all (for the exhaustive tests).
  New Format [] {Format.A16B16G16R16, Format.A16B16G16R16F, Format.A1R5G5B5, Format.A2B10G10R10, Format.A2R10G10B10, Format.A2W10V10U10,
  Format.A32B32G32R32F, Format.A4L4, Format.A4R4G4B4, Format.A8, Format.A8B8G8R8, Format.A8L8, Format.A8P8, Format.A8R3G3B2,
  Format.A8R8G8B8, Format.CxV8U8, Format.D15S1, Format.D16, Format.D16Lockable, Format.D24S8, Format.D24SingleS8, Format.D24X4S4,
  Format.D24X8, Format.D32, Format.D32SingleLockable, Format.Dxt1, Format.Dxt2, Format.Dxt3, Format.Dxt4, Format.Dxt5,
  Format.G16R16, Format.G16R16F, Format.G32R32F, Format.G8R8G8B8, Format.L16, Format.L6V5U5, Format.L8, Format.Multi2Argb8,
  Format.P8, Format.Q16W16V16U16, Format.Q8W8V8U8, Format.R16F, Format.R32F, Format.R3G3B2, Format.R5G6B5, Format.R8G8B8, Format.R8G8B8G8,
  Format.Unknown, Format.Uyvy, Format.V16U16, Format.V8U8, Format.VertexData, Format.X1R5G5B5, Format.X4R4G4B4, Format.X8B8G8R8, Format.X8L8V8U8,
  Format.X8R8G8B8, Format.Yuy2},
  All depth formats listed on in the case where we want to try them all (for the exhaustive tests).
  new DepthFormat [] {DepthFormat.D15S1, DepthFormat.D16, DepthFormat.D16Lockable, DepthFormat.D24S8, DepthFormat.D24SingleS8, DepthFormat.D24X4S4,
  DepthFormat.D24X8, DepthFormat.D32, DepthFormat.D32SingleLockable, DepthFormat.L16, DepthFormat.Unknown}
  );
  {if(Device==null)}
  throw new Exception ("could not get an acceptable DirectX graphics adapter. Your graphics card may not support DirectX. ») ;
  }
  }
  }

  I also read on various places on the Internet that a type of software with the software vertex processing will work always, even if it's slow. I also wrote code to try to create a unique feature of software with the software vertex processing and apparently not worked either. The code is as follows:

  private MakeBasicDevice() {} device
  try {}
  PresentParameters pp = new PresentParameters();
  pp. AutoDepthStencilFormat = DepthFormat.D16;
  pp. BackBufferCount = 1;
  pp. BackBufferFormat = Manager .Adapters .default .CurrentDisplayMode .format.
  pp. BackBufferHeight is this. Height;
  pp. BackBufferWidth is this. Width;
  pp. FullScreenRefreshRateInHz = 0; Must be 0 in windowed mode.
  pp. DeviceWindow = this;
  pp. DeviceWindowHandle is this. Handle;
  pp. EnableAutoDepthStencil = true;
  pp. ForceNoMultiThreadedFlag = false;
  pp. MultiSample = MultiSampleType.None;
  pp. MultiSampleQuality = 0;
  pp. PresentationInterval = PresentInterval.Default;
  pp. PresentFlag = PresentFlag.None;
  pp. SwapEffect = SwapEffect.Discard;
  pp. windowed = true; Must set to true for the controls.
  DefaultDevice device = new Device(Manager.Adapters.Default.Adapter,DeviceType.Reference,this,CreateFlags.SoftwareVertexProcessing,pp);
  DefaultDevice return;
  } catch {}
  }
  Returns a null value.
  }

  One might think that DirectX may run on any graphics card, even if it ran slowly on the low-end cards. Is it possible that DirectX does not work on some graphics cards? It is somewhat disturbing, because about half of our computers will not initialize our DirectX control and our control of OpenGL works fine on these machines. Is there something else we can try, perhaps related to some system settings that are more fundamental than the initialization code? Any help is appreciated. Thanks in advance.

  Hi grahamde,

  Thanks for posting in Microsoft Answers.

  The question you posted would be better suited to the community Microsoft Developer Network (MSDN). Please visit the link below to find a community that will provide the best support.

  http://msdn.Microsoft.com/en-us/default.aspx

  Kind regards

  Arona - Microsoft technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Unable to create the COM port virtual bluetooth

  Hi all

  I install BS from Toshiba and it seems ok. Work BT ir desn´t. I see all the drivers installed, system devices, etc. No Toshiba BT port can be seen. Local com ports show only the modem port. Try to create a virtual port but get a message "cannot create a port virtual bluetooh ' I have a satellite m100-145. Can anyone help on this?
  THX

  To use BT, you must first activate the device. At the first switch WLAN using the WLAN antenna on/OFF switch. After this key combination FN + F8 to activate the BT device correctly.

  Please try this and let us know if the problem persists.

• Unable to create the disc of recovery on my Equium P300-19O

  I am unable to create a recovery disk. I get an error code: 020150-20-00000000 and the F:106557xsp4.swm file missing message. When you create the disc 1. Two disk does not work either.

  I think it's important to do these recovery disks, but I have already lost 5 discs already. Is there any help that anyone can give.

  Thank you

  The hidden restore partition has been deleted or changed?

  Perhaps the hidden partition was damaged because of a loss of power or something.

  You should test the memory and the disk using Memtest: www.memtest.org and DFT: http://www.hitachigst.com/hdd/support/download.htm

• Unable to find the devices on the network of field

  Hello

  I'm currently setting up a network of field. The problem I have is:

  After the reboot of the PS-2000, everything starts up as usual, but after 15 seconds, the A, B, C, D LEDs do not turn off, and READY LEDs on the IO modules never turn on. The STATUS LED does not blink, there is no specific errors. The POWER LEDS on the set of the modules is on. I am unable to use the FIND FEATURES within the NOT-MAX, a 'Connection Timed Out' (or something to that effect) error message occurs.

  I have correctly configured an IP address on the PS-2000, I am able to view the files on the Flash using the FTP transfer in NOR-MAX, I updated the Firmware LabVIEW RT v7.0.0. I tried to reinstall the firmwar
  e and resetting the PS-2000, but nothing helped.

  To simplify the issue, I unplugged the PS-2000 from the rest of the basics of connection. I inspected the
  pine trees on the side of the module and they looked fine. I couldn't find all other versions of the Firmware for the PS-2000 on the NI download site, just in case my version has been altered. With this configuration, the A, B, C, D LEDs are still on, and the FIND DEVICES (not that there there) always times out.

  Then I tried to plug in a FP-TB-10 (with only input modules out there, so that there would be no external power required), and I still have the same problems.

  Material used:
  PS-2000
  -2 * FP - TB - 10 popular with a mix of I/AO/DI/DO
  FP-QUAD-510
  -FP-PG-522

  Power supply:
  -Kepco power out 16 VDC and approximately 0.4 A (+ terminal connected to V and neutral terminal connected to C)

  Software used:
  -LabVIEW Professional 7 with RT
  -MAX 3.0

  Unfortunately most
  the user manuals still refer to the field Point, as opposed to the NOT-MAX Explorer.

  Any suggestions for my experiences above would be welcome! Is there anywhere I can download the firmware Lv7.0.0 RT? Everyone knows about similar problems with LV7?

  Thank you!

  I will answer this myself!

  The issue proved to be a limited set of software installed on the FP2000. When I was installing the software, setting up NO-MAX, the only available software is LabVIEW RT v7.0.0.

  When you install the software (from NOR-MAX) on the ps2000 for the first time, the following text should be available:

  -Control environment FieldPoint
  -Manager of VI FieldPoint
  -LabVIEW RT
  -RT OR Serial
  NI-VISA
  OR-Watchdog

  If none of them are not available, the module PS, or downloadable from the NOT-MAX, then not all device drivers have been installed on the PC.

  Use your device provided with LabVIEW drivers CD to install all the necessary drivers of RT.

• Unable to create the new project for the new society without existing systems

  I'm unable to create a new project for a new society.   There is no existing systems, and I can't go beyond the selection screen.  I first put in place a new collector, registration of the database and start collections?  Or y at - there a step I'm missing?

  I found my problem.  I've been using Firefox.  This works fine in IE.  Problem solved.