Unable to create the COM port virtual bluetooth

Similar Questions

• "Unable to create the virtual SCSI device to the scsi: 0:0" import *. EGGS in ESXi 5.1u2

  Hi, I need to deploy a VM of *.ova in my cluster with 5.1 ESXi hosts u2 (1900470), but when I try to run it I get this error:

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/51e7fc6b-85806744-fb38-0021286bb22a/xxx.vmdk'

  Unable to create the virtual device. Stack 16 or 255 sectors per track is not supported.

  
  

  The same deployment works in another cluster with 5.1 ESXi hosts (700733) and on my vmware workstation 10.

  I have tryied compatibility material upgrade\downgrade with wmware workstation and download directly to my host but still do not

  I formatted the hard drive hard by ssh and readded to the inventory, I tried to convert vm to work cluster... nothing to see...

  Any suggestions? Thank you

  Solved! I don't know why but the import of virtual machines with 5.1u2 ESXi, heads, and sectors in *.vmdk file are reversed:

  BEFORE:

  ddb.geometry.biosHeads = "16".

  ddb.geometry.biosSectors = "255".

  DDB. Geometry.Heads = "16".

  DDB. Geometry.sectors = "255".

  AFTER:

  ddb.geometry.biosHeads = "255".

  ddb.geometry.biosSectors = "16".

  DDB. Geometry.Heads = "255".

  DDB. Geometry.sectors = "16".

  Connect to a host with SSH and editing *.vmdk file with VI will be the virtual machine starts without problems!

• Unable to create the virtual disk: fault. RestrictedVersion.summary

  Hello

  Im trying to create a virtual disk using the CLI on ESX4i.  The script is:

  vmkfstools.pl - Server 10.190.2.51 - c 20 g d eagerzeroedthick - a free /vmfs/volumes/Internal/test.vmdk

  When the script runs I get error: unable to create the virtual disk: fault. RestrictedVersion.summary

  Can someone tell me why please.  Im trying to create a disk of 20 GB with adapter free with eagerzeroedthick on my internal called storage, (no subdirectory).

  The file system is THAT VMFS 3.33 maximum file size is 256 GB.  The block size is 1 MB.  If it is the block size that is the problem how can I easily change?

  It's in a laboratory, not a production environment.  I need the flag eagerzeroedthick like Im trying to create a passive active cluster node MSCS 2 on a single physical node with 2 machines VMS.

  Thank you.

  Mike.

  If you use the free version of ESXi (U4 and later versions), access to tools like the VIMA API are read-only.

  -Matt

  VCP, vExpert, Unix Geek

• How to detect the data received in the com port?

  I used NI-VISA, read to read function and tried to write and read the same data through back loop. I have read from the port, but I need to read only when all the data is in the port.how series I detects all data received in the com port? Based on the data received to write the data to the port only i need.

  Please help me

  Better it should work... just create your own port number, I used 20 com

• When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  When I try to connect directly in multiplayer FSX without gamespy, every time I get an error message saying: unable to create the connection to the host.

  I need help
  Kind regards

  Thank you very much!

  To host successfully a FSX session what follows is the key enabling

  my client (s) to join my host FSX session!

  "Players Maximum (for a shared together plane 2) leave the locations reserved for friends to 0 set."

  6122 6112 UDP port translation FSX multiplayer traffic of my remote 2 wire gateway to my router Linksys Wireless N DMZ to access game FSX host...

  Only a single router in my configuration of the DMZ, the external network to the router,

  in this case, the 2 wires, had defined port forwarding.

  Am now enjoying Gamespy (R.I.P.) FSX free hosting for my MP FSX sessions via direct connection.

  5 high to the author!

• Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel. Got the unable to create the specified task

  Get the error when you try to manually create a restore point in Vista 32 - Bit - System - Protection of the system control panel.
  Got the unable to create the specified task

  Hello

  What is the exact error message received when the problem occurs?

  Methood 1:

  Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps in the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833 

  Method 2:

  You can start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  I suggest to put the computer in a clean boot state, and check if the problem persists, see the link:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: See step 7; Reset the computer to start as usual after troubleshooting is performed.

  Method 3:

  You can temporarily disable the security software and check if the problem occurs. Check out the following link to do the same thing:

  http://Windows.Microsoft.com/en-GB/Windows-Vista/disable-antivirus-software

  Warning: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps! Let us know if you need more assistance.

• Matching Motog phone with PC Windows7 but not displayed in the COM PORT Section

  HII, I finished my phone of MotoGP with Windows 7 PC via bluetooth pairing. Then I went to change Bluetooth settings and tried to find my phone in the COM Ports Section, but I was not able to find my Phone.I has also tried to add the COM Port for my phone but it did not show in the outbound connection section. Help, please

  Hi Kunal,

  To help solve your problem, please see the answer posted by DominicP on this link.

  Feel free to get back to us if you have other concerns.

• SyncToy 2.1 has stopped working, with the message "unable to create the folder pair. Unable to create the provider. Can I get help to fix it please

  After the last automatic update, I tried to back up my files (did this every week for at least one year). Message "unable to create the folder pair. Unable to create the provider"came. I tried again, same. The pair and tried to reset upward. Same message... anyone have an idea how to fix?

  Hi Steve,.

  The question you have posted is related to SyncToy and would be better suited in the SyncFX - SyncToy community. Please visit the link below to find a community that will provide the support you want.
  http://social.Microsoft.com/forums/en-us/SyncToy/threads

  Hope this information helps.

• VDDK v1.2 is unable to create the disc on the other file system

  I work on one file system other than NTFS for Windows and should be able to create a virtual drive it.

  Using the new v1.2 VDDK, I try the following command:

  VMware-vdiskmanager - c - a free - 0 TS 70 GB
  .pdvfs\myserver\2\CarlData\CarlData.VMDK

  It fails with the error:

  Unable to create the disc: the file is too large for the filesystem (0xc00000015).

  With the help of the utility even 1.1 VDDK works very well.

  If I map the 'share' to a drive letter, the next command in the V1.2 works too well:

  VMware-vdiskmanager - c - a free - 0 TS 70 GB Q:\2\CarlData\CarlData.vmdk

  I know from painful experience last year that the error "the file is too big" is pretty generic, and generally means vixdisklib think that the target file system is not NTFS.  I changed my driver year last to convince vixdisklib v1.1 it was OK to create a large virtual drive here.  "I also remember that the library is the distinction between a target name starting by".
  "compared to the other with a drive letter.  "Is there something I can do to make the v1.2 to accept the"
  .pdvfs' form of file name?

  I see a sensitive case named streams, acl persistent search for support as defining NTFS for this audit. Can you confirm if you have these?

  Thank you

  Annick

• R12 rapidwiz error on node2 - AC-00002: error: unable to create the log file

  Over multiple node R12 on Enterprise Linux 4 installation fees. below error is encountered on node2
  
  AC-00002: error: unable to create the log file
  The installation was successful on the database node and the main node of the Application. On the primary Application node only ' lot
  
  Treatment services are enabled.
  
  However, when installing on the application additional node the rapidwiz is errors
  
  "AC-00002: error: unable to create the log file - $INST_TOP/$CONTEXT_NAME/logs/12202114.log.
  Exception in thread "AWT-EventQueue-0" java.lang.RuntimeException: AC-00002: unable to create the log file.
  $INST_TOP/$CONTEXT_NAME/logs/12202114.log
  
  I tried to install several times but every time it failed with the same message
  
  I think that the reason for the failure:
  
  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:
  
  -rw - r - r - 1 person person 0 20 Dec 10:59 abc
  
  I mounted node2 successfully using
  Mount-t nfs nas1: / erparch /erparch
  
  Rapidwiz version is 12.0.0.20
  
  What are the steps to take in order to proceed with the installation on the second node.

  user10126380 wrote:
  I think that the reason for the failure:

  I am writing on a mounted NFS on Node2. If I access a NFS mount from one server other than of its origin, the root of the application server user is considered person not the user.
  I checked this by pressing a file being logged in as root:

  -rw - r - r - 1 person person 0 20 Dec 10:59 abc

  I think you've correctly identified the source of your problem. By default, the NFS mounts are usually created with the 'root_squash' option, where the user root on a remote system creates its files as the anonymous user ('nobody' in most cases) on the exported NFS volume. It is usually a good practical security; However, in your case, you need to export the NFS volume with no_root_squash to allow the user root on Node2 to create files as expected when you run RapidWiz. Once installation is complete, you should be able to go back to using the default root_squash option, as the following files in the filesystem level of demand will be created by non-root users.

  Your system administrators may not be happy with the idea of an export of no_root_squash, and I wouldn't blame them. :-) If there is dispute, make sure that they understand that it is only for the duration of the installation of the EBS, and she can (and should) be powered once the installation is complete and verified to work.

  These two articles offer a brief explanation of the purpose and value of the NFS mount root_squash/no_root_squash export options.

  Kind regards

  John P.
  http://only4left.jpiwowar.com

  Published by: jpiwowar on December 21, 2009 21:38

• How to save data from the COM port to file?

  Hi all

  can someone tell me please how to save data from the COM port on file? I transfer 1 byte of serial port... attached is the image of the vi... very basic.

  I would like to save the data in a table... I mean, 1 data--> data--> data tab 2 tab 3rd--> tab

  and so on... can anyone help?

  
  

• break in series on the com port does not work

  Hello everyone:

  I have the following problem:

  I am writing a command via the ' 'entry visa' vi on my pc com port. in some cases the com port do not return anything. This means that my "visa read" vi would timeout. the problem is that, later, I need to send more orders but must break the line in order to be able to do. I inserted the "breach of visa" vi but didn't have the reaction I was expecting. the line does not break. I tried to increase the duration of the break, but that does not work either.

  Any ideas?

  By using LabVIEW 2013

  A break will not break the connection, it will just a 1 to the Tx line for a period longer than 11 baud (?) or specified length.

  A hardware check that the breakdown is send: connect a scope or a DMM TX and GND, a 500ms break must be clearly visible even on a "slow" DMM (k resistance 10 and two LED antiparrallel or RS232 minitester practice would do the same job )

• With the help of VISA can not find the com port

  I use visa read but cannot find any com port in Windows 7.

  How can I find the com port in Windows 7?

  Windows 7 is not released. A version of LabVIEW for windows 7 is not released. A version of NI-VISA for windows 7 is not released. Wait until MS releases windows 7. Then wait tile view deleted OR made available versions of LabVIEW and NI-VISA that work with windows 7.

• Get the error message about the COM port at startup

  Original title: COM port occupied at startup

  We get busy COM port when the system has been started and given are incoming on port.

  The COM port is connected to a PLC which retransmit if he didn't get a response.

  In this case our application cannot connect to the port.

  Is it possible that we can avoid this or is there a way to release a COM port?

  Thank you

  HR

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the Forum TechNet site:

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/threads

• allow non-admins to use the COM port?

  Hi all
  does anyone know how to change the COM port settings so that the ports are "activated" for users other than just the administrator?
  Thank you very much!

  Hello

  You must have administrator privileges to change the COM port settings To do this, you should contact the administrator of the computer.

  Hope this information helps.