Maintain a constant area of land during a change of measurement scale
Can someone give me a sure-fire way to maintain the constant plot area? (This time for a graphic intensity but should work in all cases.) When I change the range of scale Y, for example, and the numbers get more time to adjust provisional scale markers, changes in the land. I tried to fix the plot by constants of wiring area to the plot area (width / height) property nodes and this code is enabled on a change of scale. Did not work. When the numbers set, it must be a higher priority more to keep the plot area for the dimensions I am programmatically asking him to stay at the.
Sincerely,
Don
It's a good workaroud, but I think that I found really what the problem is. I think that the plot area is to remain constant (with my programmatic framework of it), but it moves to the right. The property node "draw the boundaries of the area" is in fact the right to use and it works well. So now no matter what my scale setting range, the limits (left and right is what I was especially concerned) remains constant with me a constant of wiring for this property node and it is executed after the scale change event...
Thank you
Don
Tags: NI Software
Similar Questions
-
Asking hatred but... Labels on the constants are boring
I knowthis should be pretty obvious, but I can't find to change the label not constants default behavior when they are generated. Became very boring. To 2013.
Need help before I shot the rest of my hair
Thank you
Options | Environment - show created constant labels
-
Using Microsoft® Windows Vista Home Basic Version 6.0.6001 Service Pack 1 Build 6001, I have my computer set up to install updates automatic update and scan with my AVG antivirus 8.5 from one day to the next, while the computer is in sleep. In the morning, when I wake up the computer it alerts me that there are updates available, and I have to click the balloon to install the updates. Meanwhile my anti virus is update solange wake up also. Both are supposed to occur automatically during the night. Shouldn't these scheduled etc. updates works even if the computer is asleep?
Hi daglo1963,
Thanks for posting on the Forum of responses of Vista.
When Vista is in "standby", like updating the activity is suspended.
I hope this helps.
Chris
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
As suggested in the troubleshooting guide, I have disabled all of the Plugins/extensions, search for corrupted files potential and checked all the settings (although it does not seem to have one for this feature) all to nothing does not. FF behaves as I hope however when closing and reopening in safe mode. All previous versions of FF I got does not show this problem.
One of the changes in Firefox 4: by default Firefox 4 does not display the warning "Save tabs and exit" then to the closure of several tabs, but it can be turned on again by changing some preferences.
- Record of the tabs was not removed from Firefox 4, but it works a little differently.
- By default, Firefox 4 will not ask to save tabs, but instead it will always save your tabs in the output. You can restore the next time by selecting "Restore previous Session" in the history menu, or by pressing the button restore Firefox's default homepage.
- Note: This was a decision by the developers. On this forum, we are all volunteers without compensation here to help other users. Develop them and employees of Mozilla/Firefox rarely, if ever visit here.
Browsing history must be saved
- Button Firefox: Firefox button > Options > Options > privacy > [X] Remember my browsing history
- Menu bar: Tools > Options > privacy > [X] Remember my browsing history
Also, make sure that you do not erase "Browsing history" when you use clear recent history or when Firefox is closed
- Using clear recent history
- Button Firefox: Firefox button > history > clear recent history
- Menu bar: Tools > clear recent history
- When Firefox is closed
- Button Firefox: Firefox button > Options > Options > privacy (verified) > settings
- Menu bar: Tools > Options > privacy (verified) > settings
- See: https://support.mozilla.com/en-US/kb/Clear%20Recent%20History
To display the message "save tabs and exit" when closing multiple tabs, you can do the following:
- Type of topic: config in the URL/address bar and press the Enter key
- Accept the warning message (promise to be careful)
- Open the preferences/list page
- Filter = browser.tabs.warnOnClose
- If its value is set to false, double-click top (in the lower panel) to toggle its value to true
- Repeat steps 4 and 5 for the 3 following preferences also:
- browser.warnOnQuit
- browser.warnOnRestart
- browser.showQuitWarning
- Note: last pref is new in Firefox 4 b 12, may need to add (boolean)
- Info/instructions for the use of topic: config: http://kb.mozillazine.org/About:config
- See:
- Record of the tabs was not removed from Firefox 4, but it works a little differently.
-
graph of mixed signals of compensation with 2 areas of land
I have a graph of mixed signals from zone 2 simple plot. When I try to reset or clear the chart by writing a 0 to it dashboard, it bombards. Anyone know what is wrong here? Seems like it should be essential to the functioning of this object.
It's seems to work for this case. However, I had tried in the past and he had problems with some things too. I even had the code still there to generate an array of the same size, but what makes all 0, but it was not connected to the entry of the chart in my code now. Instead, the chart was hard wired to a constant with a single element to a value of 0 0.0. We can call it a success so far. Thank you
-
In the process of troubleshooting an issue of size of table, I did a Ctrl + F search after selecting a constant matrix. I find a large number of raster constants in the search results. However, many of these results (most behaves normally), if the item in the search results has double-clicked, momentary displays a black square, about the size of a standard icon, which immediately reduced to nothing. There is no indicator selection outline. I used this nice ShowAllControls & TabCtrl .vi utility to display all the controls, but nothing appears in this place.
Someone has encountered this? So far, it's just a nuisance. I am not free to view the code that was developed by a third party. I would like to make a screenshot, but the black square disappears too quickly.
-
Site updates are not displayed during update
I created an index.html and Default.css page for my website in Dreamweaver CS6. I then "put" these two files on the remote server. However, on the updating of my site in the browser, nothing changes. Simply, I find myself with:
Index of /.
CGI - bin /.
Apache server at www.***.com Port 80
Any ideas as to what I can do to fix this? Any advice would be greatly appreciated. Thank you!
And rename it Index.html index.html (from capital 'i' lowercase 'I').
To do this, use the Dreamweaver files Panel and all the links that point to this renowned index page will be updated by DW too. Download pages everything changed on the server.
Apache servers are case-sensitive so Index.html and index.html are two different folders.
Your server is configured without doubt to get default index.html file (home page) and it can't find it.
-
PI 3.14 constant *-are there a function/command vehicle for pi
Hello experts!
Just a small question that's bugging me. Instead of setting IP manually, I'd like to know that Oracle 10 g has a call into to the constant Pi? I couldn't find any info in google. So I ask you.
I have the SQL / and I work with apex:
Rather than write Pi as 3,1415926 I would have a constant like Pi, without using pl/sql, however!SELECT (SELECT (SELECT COUNT(INV_PT_ID_SUB) FROM VT_PUNKTDATEN_JOIN WHERE CNT_GEBIET = :P480_CNT_GEBIET AND INT_STATUS_SUB = 3 AND (STR_LRT_MAIN = :P480_STR_LRT) AND (INT_BE_MAIN = :P480_BE)) * INT_RADIUS_BIOTOPBAUM_SUB * INT_RADIUS_BIOTOPBAUM_SUB * 15 * 15 * 3.1415926 FLACHE FROM VT_PUNKTDATEN_JOIN P WHERE (P.CNT_GEBIET=:P480_CNT_GEBIET AND P.INT_STATUS_SUB=3 AND P.STR_LRT_MAIN = :P480_STR_LRT AND P.INT_BE_MAIN = :P480_BE) GROUP BY P.INT_RADIUS_BIOTOPBAUM_SUB) BIOTOPBAUMFLAECHE, (COUNT(B.INT_BM) + COUNT(B.INT_BHG) + COUNT(B.INT_BHK)) * 10000 / (SELECT (SELECT COUNT(INV_PT_ID_SUB) FROM VT_PUNKTDATEN_JOIN WHERE CNT_GEBIET = :P480_CNT_GEBIET AND INT_STATUS_SUB = 3 AND (STR_LRT_MAIN = :P480_STR_LRT) AND (INT_BE_MAIN = :P480_BE)) * INT_RADIUS_BIOTOPBAUM_SUB * INT_RADIUS_BIOTOPBAUM_SUB * 15 * 15 * 3.1415926 FLACHE FROM VT_PUNKTDATEN_JOIN P WHERE (P.CNT_GEBIET=:P480_CNT_GEBIET AND P.INT_STATUS_SUB=3 AND P.STR_LRT_MAIN = :P480_STR_LRT AND P.INT_BE_MAIN = :P480_BE) GROUP BY P.INT_RADIUS_BIOTOPBAUM_SUB) AS HOEHLERBAUME, P.STR_LRT_MAIN FROM VT_TBL_BIOTOPBAUM B, VT_PUNKTDATEN_JOIN P WHERE (P.CNT_GEBIET = :P480_CNT_GEBIET) AND (B.LNG_INV_PT_ID = P.INV_PT_ID_SUB) AND (P.STR_LRT_MAIN = :P480_STR_LRT) AND (P.INT_STATUS_SUB = 3) AND (P.INT_BE_MAIN = :P480_BE) GROUP BY P.STR_LRT_MAIN
Is this possible?
Kind regards
SEBMaybe you can use a function arcsine... it's your wish...
select asin(1)*2 from dual
Ravi Kumar
-
Satellite L670-1HJ-speakers interns are not silent during the selection of line output
I want to use an external set of speakers, but when plugged, selection of output in the Realtek HD Audio Manager disables the internal speakers, instead only reduce their volume a little. Selection headset does not switch their stop, but this causes audio being sent to the levels of helmet, which sounds terrible on normal speakers and is therefore not an option.
Is there a way I can get it to turn them off when you use output line too or just disable the internal speakers in total?
Have you checked all the available sound settings?
Open the properties of the sound > playback devices and try to disable the speakers out there.I only helmet and, unfortunately, can not test it for you, but there must be an option where you can turn off the internal speakers.
-
How can I clean the data which are drawn upward during the filling of fields?
For example, when I start typing my e-mail address I get a few suggestions that have been misspelled errors. Thank you
Depends on what browser you use the approach. Set your browser to clear 'Saved historical form' it will clear.
-
BlackBerry 10 my Z10 landed during the OTA
Hello everyone!
Well, I just bought my Z10 with some old OS (10.0 and don't remember what exactly following). When I turned on, he said new ver OS 10.2.1.2102 found. So it was downloaded and then installed, then appears on Z10 needs to restart and I pressed 'restart now '. From there on, things have become to bad: 2 hours ago I pressed "restart" and nothing happens: window with the message "full software update. Preparing to restart"is that I have. I don't know what to do, because I'm afraid for my chip of brick.
Please help someone!
In fact, you have a little later. Solution to take a deep breath , turn off the power to the charger, then remove the battery. After battery reconnect everything go his way.
I think it was because that the chip screwed up after really big update (1.1 GB).
-
What are the consequences of the change of password for the admin user in golden gate?
Hello
I just picked up during surgery and allows us to replicate door data of gold. Unfortunately, the password for the user that has been created in the database for the Golden Gate has been lost.
At the present time, processes are added and I was trying to connect but it fails with name of user and password invalid.
I want to change it. Do I need to apply this new password anywhere after changing?
Thank you
Hello
Not a lot of consequences, if you have changed the password where you had used.
1. you must change the password of user goldengate in parameter files where ever you had mentioned, as the extract file etc..,.
2. If you used the password encrypted, you must re-create the encryption password.
3. If you used a user Alias id, then you must change this too.
Kind regards
Veera
-
When I try to change my composition height and width using extendScript, it works but with anchor point at the upper left corner. How to maintain it in the Center?
My code:
COMP. Width = 4000;
COMP. Height = 4000;
result:
expected:
Thank you
OK, here is therefore the function for resizing of the model code. I tested several times with anchor points are offset on layers and centered, even with layers that are not yet within the limits of the Model Viewer. I'm sure there will be some users who eventually find something that will break it, but for now it seems to work perfectly.
app.beginUndoGroup("CompResize"); var myComp = app.project.activeItem; resizeComp(myComp, 500, 500); app.endUndoGroup(); /* TESTING ABOVE */ function resizeComp(compObj, newWidth, newHeight){ if(typeof newWidth == "number" && typeof newHeight == "number"){ if(compObj instanceof CompItem){ var locData, allLayers, allLayersLen, curLayer, clAP, clPos, xShift, yShift, oldCW, oldCH, clH, clW, xOff, yOff; pData = new Array(); cWidth = newWidth; cHeight = newHeight; allLayers = compObj.layers; allLayersLen = allLayers.length; oldCW = compObj.width; oldCH = compObj.height; compObj.width = cWidth; compObj.height = cHeight; for(var i=1; i<=allLayersLen; i++){ curLayer = allLayers[i]; clW = curLayer.width; clH = curLayer.height; clPos = curLayer.transform.position.value; clAP = curLayer.transform.anchorPoint.value; xShift = (oldCW - cWidth)/2; yShift = (oldCH - cHeight)/2; curLayer.transform.position.setValue([clPos[0] - xShift, clPos[1] - yShift]); } }else{ alert("Invalid argument(1):\nComp Object required."); } }else{ alert("Invalid argument(2/3):\nInteger required for Width and Height."); } }
-
I have updated to firefox from 15.0 to 15.0.1 using the dialogbox "About Firefox". under "Uninstall or change a program" in windows 7 x 64 I have now the two versions of firefox 15.0 and 15.0.1 registered as being installed.
also, I had previously disabled the option "Use a background service to install updates" and uninstalled "Mozilla Maintenance Service". now the option of background service use has been reactivated and the "Service Maintenance of Mozilla's ' has been reinstalled. I really like how mozilla has zero respect for the fact that I don't want some unnecessary services installed on my computer, just so that I don't have to click on a UAC prompt once per month.
I'll probably just uninstall the both firefox and the maintenance server and reinstall firefox. both versions are supposed to be there or is this a bug? and why reinstalled substantive service and the option is enabled when specifically, I uninstalled and disabled before?
Edit: I just checked my other computers. 1 windows 7 x 64 with the maintenance service installed and the other xp with the maintenance Server uninstalled or disabled. two computers only list 15.0.1 as being installed and the maintenance department was not reinstalled on my xp computer.
Just to let you know, the maintenance service is not running on your computer at all up to and update must be installed. It does not all resources and is perfectly fine to stay on your computer.
As for the problem with two versions of Firefox, uninstall the other oldest (make sure not to remove your personal data) and see if the new version works.
-
Messages on my MAC are vertical, how do I change horizontal?
How do I change from vertical to horizontal SMS on my MacAir?
Hello
You say that in the Messages application Messages (refer to 'Text', which suggests SMS in the Yosemite or later) make their appearance in a vertical arrangement rather than the normal left to right layout of European Western languages?
It can be done.
Normally, the line type you can be added, create paragraphs by pressing ALT + ENTER.
Using ALT + Enter after that each letter can create this illusion.
It could be made into longer pieces of text using AppleScript.
See the Script Messages in mixed case that can be used in Messages in the folder ~/Library/Application Scripts/com.apple.iChat.
If it is text SMS messages, they must also appear like this on the iPhone if they are sent by the method I described above.
There is a minimum width that the main Messages window will reduce to so it is impossible to draw a conversation so each side was only a wide character.
If it was system preferences > region and language, then other apps would also show which explains why I think they are sent to you in this way.
Can you confirm for me that both sides of the conversation it?
21:44 Saturday. January 9, 2016
iMac 2.5 Ghz i5 2011 (Mavericks) 10.9
G4/1GhzDual MDD (Leopard 10.5.8)
MacBookPro (Snow Leopard 10.6.8) 2 GB
Mac OS X (10.6.8).
a few iPhones and an iPad
Maybe you are looking for
-
Lack of Whatsapp icon Iphone 6s
I read on other posts on this subject and tried to be perfect, but without success. Basically, I have installed Whatsapp (new phone), used, returned an icon is no longer where I placed it. When I go to AppStore it shows like a product purchased with
-
I got the computer used and he could of had problems, but my father to restore the computer and tried to make it past the "whats your computer name?" when he clicked then the part it froze with the mouse like a glass time for loading. the way I know
-
A virtual machine by CSV?
I use the metric graph widget. I don't see a way to get more data from a virtual computer on a simple CSV file. E.g., application (MHz) CPU for vm1 and application (MHz) CPU for vm2 in the same csv file. I can only download application (MHz) CPU
-
Hello, I have a HP Pavilion g6-1a52nr Notebook PC (running Windows 7 64 bit) which is in a reboot loop. This happened after I installed VMWare Workstation 7 (in the installation process there is no occurs.but error after installing that I try to rebo
-
I can't open my RAW Canon's 60 d photos in CS2
I can't open the image RAW in CS2. I realize, it's a very old version of CS, but I don't want to go if I have to. What can I do to open my RAW photos? I take pictures with a Canon 60 d? Help, please! Thank you!!