maintenance/repair of equipment videos

on the latest Lenovo laptop, I got like this at the top of the forum, there were links to videos that show you how for example;

Install the new memory.

Install the new keyboard.

Install the new hard drive.

And so on

Lenovo provides similar videos for a Lenovo ThinkPad Edge E520, with 4 GB of ram with Intel i5 2, 3 GHz.

Hi, Funnykeyboard

I think that this is the site you are looking for. It is a collection of videos for your system showing how install/remove devices. The link is to your specified system, but the URL for the main site is http://www.frusonfone.com/fof if you want to bookmark or view it later.

Make sure that any changes you want to make to your system is covered by the warranty (in case of warranty). You can check if the changes that you want to are covered by the warranty with the manual of Maintenance of hardware for your system here.

Good luck

Adam

Tags: ThinkPad Notebooks

Similar Questions

  • Names of NIC after the Maintenance of the equipment

    VMware ESX 3.5 u3 (123630)

    HP DL585 G2

    Once done some harware troubleshooting/maintenance, restarted ESX host however vmnic1 and vmnic2 are gone, now I have vmnic10 and vmnic11.  Similar problem occurred with HBA.

    Y at - it a file or set of files that has the name of adapter mapping pci slot I can change?

    you need to change etc/vmware/esx.conf. Replace all the vmnicB vmnicA and restart... etc.

  • cost of repairs paid before repair

    Hello

    I would like to know what is the normal procedure?

    I went to the Service Center for repair iPhone 6 more, due to liquid damage.

    then they said I have to pay fees before repairing my phone,

    is this correct? and very expensive repair costs about $500 (RM1700 in Malaysia)

    Please advice me...

    From my experience with the repair of equipment of any kind, I have never paid before repair completed. I paid the assessment fee, which is a small amount to cover the review of a product prior to repair, but this right is only deducted from the final invoice. What about a phone that is damaged by water or a liquid, it is very rare to be able to fix it. Usually, you buy a one off replacement under warranty. I don't want to pay for any repairs before work.

  • Repair Macbook Pro 15 "mid-2010

    So it seems that my Macbook Pro Logic Board may be faulty.
    To add to that, my fans and my battery had to be replaced as well.
    I also have the question 'well known' with the graphics card, which makes the system crash when you perform certain actions.

    All repairs will certainly cost a new macbook, and of course there is no need to spend $ 500 only to logic board when I have other ongoing problems.
    I have read many articles and discussions where they say that Apple offers $ 310 lump sum that covers repairs to equipment, called "repair".

    However, I contacted apple support and they told me that this package applies only on iPhones and no Macbooks, even if all the articles and discussions I've read are referred to laptops.

    Do you know if this is true? And if this, how do I request it?

    My Macbook is under warranty and was bought in Italy. But I am now in New York (I have read that this special repair happening just in the USA and Japan).

    Thank you!

    If you ask Apple to fix it and Apple has given you an answer... that must be the right answer.

    We are simply other Mac users like you and depend on Apple to get answers on how it would be for Apple to make a repair.

  • D5160 repair

    Can you suggest a source for a maintenance/repair for the D5160 manual?

    Printer has an axel drive broke (plastic) on all pickup/power roller double roller.  To get to the Assembly, it seems that the entire unit must be dismantled.  I deleted all plastic trim, bevels and the Panel, but to continue any further I have to remove the two drive belts - one for the transport of print heads and the other for a glass of indexing circle that appears to control the size of police or spacing.  If I remove these belts, the circle-printhead assemblies and glass re - year automatically when they are assembled or manual adjustment should be?

    If I can access and remove the roller of pickup/feedingstuffs having failed, and identify the part number, is there a source for these parts?

    Thank you

    Ray511

    Hi Ray,

    We do not recommend trying to fix your printer this way. Also it is not anywhere you can get parts of this type. If you like this model of the printer, you can probably find a cheap to replace him on the line.

  • System scan - video card - cannot run

    Hi all!

    I recently received an ALIENWARE17 and whenever I run the analysis of the system, the two test equipment video card always displays the same message: 'cannot run. Can someone help me please to identify why this is happening and if it means that the system is not detecting? or even a bigger problem?

    I tried already to search some information forum first before the opening of a new band of working capital, but have no luck.

    Thank you very much in advance

    Hello

    This could be a question or a problem with the Support tool help himself. Try to run a video card stress test instead. Follow the steps below to do so.

    • Open support Assist
    • Click Checkup
    • Click perform custom analysis
    • Click on the Nvidia GTX 980 M card
    • Select stress Test

    Let us know how it goes.

  • Is there a guarantee after replacement?

    Hello Apple fans - I'm too anyway,

    I would like to know your opinion if apple guarantees the replacement free of charge after that I have replaced my video card for the same after 3-month maintenance / repair warranty service Apple provides also? It's quite strange that I have to pay 700 EUROS according to my service provider local to apple for technology HW old and does not work both to the risk of having again directly after these 3 months to pay more than 700 EUROS to replace another. Is it possible that Apple for these cases to arrange repair futures than any other service?

    Sincere friendships and Thx for your suggestions,

    Alfons Salden

    Alfons,

    You should be in touch with Apple about your question. It is an international forum and policy to your topic may be country-specific.

  • Satego X 200; Absolutely no reaction more

    Dear Sirs,

    My nephew has a Satego X 200 and asked me, due to I am somewhat experienced with repairing electronic equipment, to check why his laptop won't boot any more. I checked the power supply but also of the battery, but the voltage going to the Board only.
    Obviously, the power does not pass the rectifier in the power supply of the Commission. No light comes.

    Of course, I don't have a diagram of the Board of Directors.
    Do I have a chance to get one? If so, where I could get this diagram of?

    Do you know where in Hanover (Germany) or suburb of Hanover is a Toshiba Service partner? I am grateful for any advice.

    Best regards
    Peter

    > Sure, I don't have a diagram of the Board of Directors.
    > Any chance I get a? If so, where I could get this diagram of?

    I don t think you will get all the details of the motherboard.
    As far as I know that Toshiba ASP technicians have access to textbooks to interview, but from my experience these documents are not for public use and I think that you have it

    By the way; This manual maintenance don t contain diagrams of motherboard but only an instruction how to replace certain parts and diagnose a malfunction of the notebook
    So I see every chance to get the motherboard repaired in most cases if this problem occurs, then the whole motherboard must be replaced.

  • Owner's manual for Satellite 2410 603

    Hello

    I have satellite laptop computer model 2410-603. And I wanted to open it to change the hinge of the screen. So if you could help me I will be very full. I mean just tell where I can get the maintenance of manual equipment for the same model. If not is there video available for that I opened the laptop...? Help me.

    Hello!

    Manual service that you want to say are not public and only for s ASP (authorized service provider).

    You can search with Google to find instructions how to disassemble this laptop. Maybe you will find something.

    To be honest, if you n t have experience with laptop disassembly ask a technician for help. It's a little tricky.

    Good bye

  • can u give me a name to the difficulty of the doors that open 2 remoe and insert the tape for es8400

    I have an es8400 door where u insert and remove the video tape is stuck open u can recommend someone my code postal is75067

    Hey jesse!

    Thanks for posting on your ES8400.  Given the age of this model, it is more in the life of service and spare parts are no longer available.  Try looking for a local store that repairs still older video equipment.

    You can also participate in the program of loyalty of cannon instead.  The option of the Canon loyalty program allows you to replace your current phone for a reduced fee, postage.  The original non-functioning camera would be then returned to Canon USA for recycling using a which would be offered prepaid shipping label.

    If you want to participate in this option, please call our sales department at (800) OK CANON (800-652-2666) for seven days a week, from 08:00 to midnight.  Let them know you have worked with online support and the Canon loyalty program.  Be sure to have your serial number of your camera when you call.

  • LifeCam HD-5001 not seen by computer

    I just bought a LC HD-5001 and installed the software from the cd. The computer does not see the camera. I could miss a driver? If so, then where can I find it on the cd? I am running xp sp3. I could add hardware but I need a driver.

    I just bought a LC HD-5001 and installed the software from the cd. The computer does not see the camera. I could miss a driver? If so, then where can I find it on the cd? I am running xp sp3. I could add hardware but I need a driver.

    Hey Daniel of Canada

    you will find the drivers on the manufacturers site if they are not on the cd that would be very unusual if they are not on the cd

    unless the drivers for your operating system were not written by the manufacturer

    check out their Web site

    Here is the vista forums

    Try the forums xp on the link below

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

    Answers by topic

    Walter, the time zone traveller

  • Problems with Acer Aspire One A150 Atheros AR5007EG

    Hello, I have an Acer Aspire One A150 with windows XP and my wireless card problems, try to connect. The card is Atheros AR5007EG

    Hello

    get the latest XP drivers for your Acer model

    http://support.Acer.com/us/en/default.aspx

    and here is the vista forums

    Try the forums xp on the link below

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=4

    Answers by topic

  • HP ENVY 14-1210NR display

    My HP Envy is not guaranteed. I bought in 2011 in the United States. In fact, I live in Mexico and I don't support hear. I need to display and support for my knees. Thank you!

    Hi Noearis, welcome to the Forums of HP. If you need repair of equipment options, you can contact the telephone support: Technical Support HP, 1-800-474-6836 in North America. For all other regions, please click here.

    If you want to repair the display yourself please refer to page 78 in this: maintenance and Service Guide. It will give you part you might be able to order via numbers: HP part Surfer, as well as installation instructions.

    I hope that answers your question.

  • When you try to perform a system restore, I get an error saying: "an unspecified error occurred during system restore." (0 x 80070002)

    original title: System Restore problems

    Hi, I have problems, perform a system restore using windows 7. I get the message: "an unknown error occurred during system restore. (0 x 80070002). any help with this problem would be appreciated. Thank you very much.

    Hello

    This applies to vista, but use it for windows 7

    There are a variety of reasons for system restore problems

    Norton and Norton product Tamper Protection is the main

    Read about it:

    http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

    http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

    You can try restoring the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    and malware can interfere with the restoration of the system

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    and issues of windows 7

    Here is the vista forums

    Try the repost in Forum windows 7 the link below

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

    Answers by topic

  • When I try and send a file to my laptop I get this error: "bluetooth device not found please make sure that your bluetooth device is propably connected and turned on."

    original title: BLUETOOTH PROBLEM Please HELP!

    When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".

    Make sure that your bluetooth device is propably connected and turned on. »

    In addition, the mobile is unable to send any file to computer th.

    I've already matched the mobile with the computer and I use windows 7 please help.

     

    When I try to send a file from my computer to my cell phone an error message appears saying "bluetooth device not found".

    Make sure that your bluetooth device is propably connected and turned on. »

    In addition, the mobile is unable to send any file to computer th.

    I've already matched the mobile with the computer and I use windows 7 please help.

    Hey xtheultimatethinkerx

    Here is the vista forums

    Try the repost in Forum windows 7 the link below

    http://answers.Microsoft.com/en-us/Windows/default.aspx#tab=2

    Answers by topic

    Walter, the time zone traveller

Maybe you are looking for