Major League Soccer (MLS) in Windows Media Center

Similar Questions

• Windows Media Center cannot sync/set up with AT & T UVERSE

  Windows Media Center cannot configure/sync with my cable TV box. ((See system put in place/info below)

  I spent about 10 hours trying to solve this problem.  Tried every way Windows Media Center allows you to configure, automatic, manual (tried all listed codes), IR remote learning. I searched the web, talked with HP technical support for more than 3 hours, talked with Motorola, ATT UVERSE, someone seems to have a solution.  Based on troubleshooting, I have it so far, I'm a 90 + % sure it's soley configuration of Windows Media Center TV of UVERSE problem of decoder.

  I can get a TV signal on the computer through Windows Media Center and get my cable TV box to make it work, but it's as close as possible. The remote control works, all connections are correct, IR blaster or transponder is located correctly on my TV receiver.

  In the IR remote control learn installation manual configuration (I think this is one of the two) or Windows Media Center asks you to press and hold the "0" on your remote decoder, pointing to your receiver IR from PC.  When I press on it it seems to answer by saying to continue to hold then it ask you to release what I'm doing, then I get an error message.  It is the closest, I learned to operate.  I tried a few tricks/variations on this that I found on this site and others, but not luck.

  Another question the image that I get, but cannot control with Windows Media Center is of very poor quality (worse than a bad cell phone video on youtube), I guess that's more hardware related issue, but I had a machine good enough speced. Also, there is a time delay major and variable (4-5 seconds) between the time you press a button on the decoder TV and you see the answer on the machine, which makes it very difficult to operate.

  I keep trying to stay on the PC band wagon, but of course, the other side seems to be much less difficult to get simple things to work.

  Anyadvice is appreciated.

  COMPUTING: NEW HP Desktop (updated all the software) - Windows 7 Professional - 1 GB ATI Radeon HD 4850 - TV tuner, ATSC-NTSC with PVR, remote - Intel i5 - 8 GB of SDRAM. TV SERVICE: AT & T Uverse - Motorola VIP1200 box

  http://www.eggheadcafe.com/software/ASPNET/30978261/att-UVerse-and-Media-Center.aspx

  the post titled "hey guys" posted August 8, 2009 should help out you. I managed to set up my own using the info there. Poor quality looks like a standard old school SD tuner in your pc.

• Windows Media Center: guide program does not update

  Hello

  This is my first post here.

  I hope someone can help with Windows Media Center (7) electronic programs guide. For a few weeks now, it did not update properly. We receive updates for the local HD channels only - local standard-def channels or regular cable channels.

  I tried various methods to get MCUPDATE. EXE update completely the EPG, but nothing has worked. The most "promising" indication (regarding an indication as to what happens), we had, is that, sometimes, we get the error message "cannot retrieve updates (error: HeadendID [eight-digit number] is not valid.)»

  I tried to contact Zap2It and they referred me to Microsoft, this is how I found myself here. The procedure for reporting a problem to the EPG is not exactly crystalline, so please bear with me if I did something wrong. (Zap2It gave me a link to https://connect.microsoft.com/site1145, but when I click on "the comments link on the left" as indicated on the page, it just brings back me to the same page).

  If it helps to have this information, we are on Comcast and using a CableCARD in a Ceton InfiniTV 4 PCI - E tuner. We can watch all the channels that we subscribe to, and we can save them manually, but there is no metadata program and we do not have records of the series on cable. Please let me know what I need to do to report this to someone who is able to solve the problem.

  Thank you very much.

  Hello Barb,

  I tried this (evolution of postal codes) last night, one of many new things I've done. I chose the closest city that was not ours and got a little familiar set of guides to the choice. One of them selected and downloaded - but of course the channels does not match.

  We finally had success when I risked to re-run the installation of TV program; My fear was that we might have to re-pair the CableCARD everywhere again, which is a major pain as some cable company RSC have never even heard of him, and even fewer know what to do about this. So go through configuring TV was as a measure of last resort for me.

  But I've learned that we can only accept the existing information of CableCARD in WMC and go on its merry way. We have completed the installation process, enter the correct zip code once again - and this time we got not only all the right-hand lanes, but also a value of 12 days of listings!

  So I'll add new run TV installation for our 'Protocol' in case we ever run into this issue once again. There is great relief in our House!

• Video Windows Media Center HDMI error problem

  I noticed this problem scattered on these forums, and it took me some time to find the solution on other forums, but thought I'd post it here. For people using some graphics cards ATI HDMI with windows 7 MCE, trying to play Dolby Digital sources causes the MCE crashing. The error will say something in terms of "video error... in windows media center must be restarted." This happens about 10 seconds after the video with audio playback SD. I tried to play with all the different types of codecs ffdshow and AC3Filters etc.

  The solution is in fact a major bug in windows 7. To work around this problem MCE7 and windows sound properties cannot assign 5.1 speakers. You define the sound properties in 7 Stereo 2.0 and keep the MCE to 5.1 for dolby Digital encoded files without MCE game crashing. I hope that MS will make a fix for this because it is a serious problem, and the solution is not easy to find.

  I have a ZOTAC ZBOX ND02, dual ATI 750U Tuners and Windows 7.  Reloaded the o/s once to resolve quickly the it and returned.  Spends hours on the subject.  Switching to 2 speakers in the MCE Assistant did the trick.  Thanks for the tip.  Phew!

• "created the slideshow" inside loop problems (Windows Media Center) during playback

  Why didn't Windows Media Center during playback of a repeat of the start file "slideshow created with music" and / or "loopback", with only the first 20 or so (on perhaps a 100 total on the full slideshow) slides or photos over and over again without showing the rest of the majority of the slides at all?

  Hey trasel,.

  Unfortunately, it is not possible to include another small video clip for an existing video on which you have already created.

  However, you can create a new slide and add it to the existing one.

  Check out the link below howcreate slide shows in Windows Media Center:

  http://Windows.Microsoft.com/en-us/Windows-Vista/your-pics-on-the-big-screen-create-slide-shows-in-Windows-Media-Center

  Kind regards

  Savan - Microsoft technical support.

• Satellite P - Windows Media Center problem

  Without any visible problems or bug virus threats, Windows Media Center starts to crack on video output.

  Just randomly losing pixels on a screen and all other similar programs like wmp, vlc media player, mv2, and Intervideo Win DVD works properly?

  Hello!

  You have installed any Service Packs or patches for your operating system?
  Check on the Microsoft update Web site.

  I think that your assignment isn't really clear. Can you please explain this exactly?

  Good bye

• Windows Media Center "to listen or look at a conflict"... does not recognize the TV tuner

  I have completely exhausted the forum Windows Media Center for response to the resolution of this problem. I replaced my unit ATI TV Wonder Digital Cable Ready, as well as my graphics card tuner, and WMC still says 'No TV Tuner Found"and the message" listen or look at a conflict - no tuner available to meet the current demand "when I try to watch live TV. I have also a "no tuner hardware detected... Please ensure equipment is installed correctly...» "if I try to set up the TV Tuner again.

  I don't think that my answer lies in Windows Media Center or hardware from ATI. I'm now trying to figure out if it involves this feature installed at the factory of HP listed on the bottom of my computer: "GENUINE WINDOWS VISTA HOME Premium TUNER DIGITAL". I understand that it is the software and hardware.

  I would be grateful if anyone has answers. If anyone knows what this function is that was installed at the factory, and how I can uninstall and reinstall the software and replace the hardware, I understand that too.

  Thank you

  After unsuccessfully trying everything I could find that had the potential to solve my problem, I finally solved the problem myself.

  It's actually a corrupted Windows file that allows my TV tuner, which caused all my problems. I reinstalled my Vista operating system to its original state, and now the ATI TV tuner works fine. Easier said than done.
  
  Mr. Fix It

• No big screen in Windows Media Center on Qosmio G10-133?

  Hello
  I just set up my Qosmio G10-133 to watch the TV via a set-top box Freeveiw. However in Windows Media Center, I can't see it on the big screen. If I veiw the same programe in the Toshiba drive I can veiw on the big screen OK.
  Any help with this would be much appreciated.
  Thanks in advance.

  Hello
  Can you please check in the BIOS settings if there is option called display stretching or something like that?

• Windows Media Center - why it cannot detect TV?

  I used Qosmioplayer and it detects the TV from my Sky Digibox very well signal. However, I would like to record TV with my laptop and when I try to set up the TV using Windows Media Center, it cannot detect anything. I tried every possible permutation and the manual does not give pointers...

  Why the Qosmiplayer works for the entrance to Sky TV, but not the media library?

  Please help it's driving me crazy!

  I assume you are using a lead of areal coaxial standard to connect to your sky box? If so, you need to know which way the sky is coming in the. To do this, use the Qomsio drive to search for channels and when it detects the signal from Sky, it will tell you which way it is passed on. Something like channel 36. OK, now you have this information, start the machine and go into Media Center. You must manually add this channel. As Media center works with the EPG, all channels such as the skyinput must be added.

  So, in the main menu, go to

  Settings > TV > Guide > add missing channels > add channel

  Now enter the channel name you want displayed when viewing. IE SKY.

  Now you enter the channel number 36 IE that you got the Qosmio engine. This will now be held on the next available channel. IE 6/7/8 etc. Everything do you now is go to the channel and it appears at the entrance to heaven.

  Hope this helps

• Qosmio G40 - 10F: how to set up double Tv Tuner in Windows Media Center

  Hello

  I recently bought a 10th G40 and I was wondering how to set up dual Tv Tuner in Windows media Center to watch and record the Tv at the same time.
  I tried to download the new driver from the Toshiba download page, but it seems to make no difference that Media Center does not give me the ability to configure 2 tuners.

  Any help would be grateful

  Michael Bowen

  Hello

  Found this useful Microsoft page:
  http://www.Microsoft.com/Windows/products/windowsvista/footnotes.mspx

  Take a look at the chapter * M *-> on MCE

  You can find this info:
  + Reading and TV recording features require a USB TV tuner or external. Supports up to two TV tuners +.

  So in my opinion, you cannot record TV and watch another channel at the same time using only the internal TV tuner.

• Windows Media Center - reading Jumpy

  Hi all, hope you can help.

  When I try and play music through Windows Media Center (A100 with Home Premium) playback is very nervous.
  When I select the file directly from his file, it opens in Windows Media Player and plays perfectly.
  CPU usage seems fine.

  any advice to know where star will be greatly appreciated.

  Thank you

  NeFish

  Hello

  I searched a bit a found out that Vista Media Center supports clean audio codecs.
  Eventually he s an audio codec problem, who knows

  See this page:
  http://mediacenterexpert.blogspot.com/2006/07/Vista-Media-Center-decoder-utility.html

  This tool allows you to change the codec s; audio and video.

  In addition, you can try to update the audio driver also, but I m not very good if it will help, but it s worth a try!

• Take control of Windows Media Center

  I have a Pavilion P6000 series model p6700z tour running Windows 7.  I don't know what I did but now Windows Media Center took over all programs on the computer.  When I start the computer it opens in Windows Media Center, if I click on one that Windows Media Center opens and not the program.  I tried to do a system restore, and which opens again is the Windows Media Center. It's all the computer don't then stay on media center to Windows. Antivirus programs are Windows Media Center also.  All icons on the desktop are icons of Windows Media Center.  Can someone please instruct me on how to get my computer back to normal.  I have no backup discs and have not all the disks for the software that came with the computer.  I bought the HP computer online, but no records have been included.  I can't read my email so I have to find a way to pass messages.  Please help me!  I hope that's all the information you need.  Thank you for your time.

  Maria

  Maria, welcome to the forum.

  I think you have a virus.  This is a program that can help you.  I installed it to make sure it's safe.

  If the program in the link doesn't help, I suggest to make a recovery of the system using this guide for you help.

  Please, click on "Thumbs Up +" if I helped you and click "Accept as Solution" If your problem is resolved.

• Windows media center m7350n: my computer refuses to get past start of windows blue screen

  Office refuses to make it past the windows blue screen with the words "starting windows" my Windows media center what do I do in order to get to start up again.  I did a few system recover test with these results. "

  Failed, test: test Shortself, Hd521-2w error code.  He also said that he would not recommend a system recovery.  This problem started one evening when my windows media center Office said that it had set a file.  How can I fix my desk as it is passed, the windows startup screen

  Skulldragon7

  Hello;
  
  Let me welcome you on the HP forums!
  
  I read your post on your PC not start and I wanted to help.

  I wish I got good news for you, but I did not, as it sounds a bit like the hard drive has failed, what is to be expected if this PC XP - era still has the original drive.

  We have a few troubleshooting steps to test the drive but they only work on recent PC.

  What could work is by pressing ESC, or F1 or F2, when you start to see if one of these enter you a Setup screen, and if they do, choose to run the diagnostics from there to go to disk.

  If the drive has failed, there is bad news (sorry!) -in that HP long leaves Jersey recovery media for XP - era machines, so there is nothing you can order from HP to restore your PC to a new drive.

  Given that HP no longer provides a recovery media for your model, a few other sites, you should check are: http://www.computersurgeons.com/ and http://www.restoredisks.com/

  And if not enough bad news, I guess that the hard drive in your XP machine has something known as an IDE interface.  You can tell by looking at the back of the car where the data cable connects.  If it is a large flat cable (about 2 inches wide) and there are a bunch of small pins where it connects on the disc, then it IS an IDE drive and those who are practically impossible to find, as the industry player opted for SATA disks making a few years back.

  Sorry... but it's time to think seriously to switch to a newer PC.

  Good luck
  
  I'm a volunteer and I do not work for, or represent, HP.
  ========================================================================
  If you feel that my suggestions helped you, please click on the thumbs-up symbol to say thank you!
  
  If they helped to solve your problem, please click 'Accept as Solution' to help others find similar information.

• How to install Windows Media Center & decoder: Please help!

  I have a HP desktop computer. There not yet 2 years old, I have Windows Media Center (WMC) and I could watch TV very good about it until I'm the cable box. I simply plugged the cable into the Tower, no problem. Now that I have the decoder, I'm confused as to what's missing to make it work! It is said that the IR hardware & IR control cables are missing. What does that mean? Also, how far I will use? Do I have to use a universal? Oh, and it shows the channels that are supposed to be here (for example: it comes through that channel 53 is supposed to be MTV, but there is no video or sound).

  Thank you!!!

  -Lisa

  Set your tuner, PC TV channel 3 or 4 according to the cable box output channel.  The decoder is initially connect to the wall and the video output is connected to the PC.  Use the remote control for the set-top box to change channels.  If the PC is to drive the sound then you will also need to connect audio cables (red and white) from the cable box to the audio inputs of the TV tuner card.

• How can I use the FM tuner in Windows Media Center?

  Hello world.

  New on the thread.
  Found this site looking for answers to a problem I have. ?:|

  I received my Toshiba Satellite computer as a Christmas gift. I noticed that it is a cool FM tuner.

  I've also been playing with Windows Media Center.
  However, I can't understand how to operate the tuner inside the WMC FM...?

  I added the NXP FM tuner program to the "extras" on WMC, but instead to open the tuner inside the WMC, it just opens the separate program.

  Anyone know how I can use the FM tuner (or another maybe?) inside the WMC?

  Thank you! :)

  Hello

  I have no experience with this because my Satellite doesn't have an FM Tuner but nice talk on it you will find under
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=138027

  If you find the final solution, it will be nice if you can describe an own experience with it. It may be useful to other people here.

  Bye and good luck!