Major update of Windows 7 = lost everything...

Similar Questions

• I get the #80073715 error relative to the major update of Windows. Does not refresh.

  New Windows important day of facilities; get #80073715 error message when you try to install; numbers (KB97145) are included with the update message.  Thanks for any help.

  Hello

  1 let us know the list of the updates that fail to install?

  2. we can know the full error code/message you receive?

  Follow the steps below:

  Method 1:

  Open the Windows Update troubleshooting tool

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Update-Troubleshooter

  Method 2:

  Cannot install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/2509997

  Important: when running chkdsk on the drive hard if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

  To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  It could be useful!

• Reference Dell 5520, updated to Windows 8, lost control of Wi - Fi

  I bought a Dell Inspiron 15R model 5520 with Windows 7.  Everything worked well and I had a Wi - Fi access.

  I've updated to Windows 8, but now I have no wireless access.  I opened the PC settings and confirmed that airplane Mode is disabled and Blue-tooth is turned on.  I have no other settings on this screen.  I have used the Fn & F2 keys and confirmed that the Wi - Fi light on the front of the laptop is off, and then turn it back on.

  A wired connection works fine.  When I ran for a new network troubleshooting, no router is listed, even though I know that there are several routers available to my other laptop and my eReader devices.  How to access my Wi - Fi controls?

  Thank you.

  It worked!  Now, I have Wi - Fi connection controls and can connect wirelessly to the internet.

  Thank you very much.  You are the best.

  As you requested, I have deleted the two items and posted my info below.

  Microsoft Windows [Version 6.2.9200]

  (c) Microsoft Corporation, 2012. All rights reserved.

  C:\Windows\System32>Systeminfo

  Host name: PORTIA

  Name of the operating system: Microsoft Windows 8 Pro

  OS version: 6.2.9200 n/a build 9200

  OS manufacturer: Microsoft Corporation

  OS configuration: Standalone Workstation

  OS Build type: multiprocessor Free

  Registered owner: DELETED FOR the DISPLAY

  Registered organization:

  Product ID: DELETED FOR the DISPLAY

  Original installation date: 19/01/2013, 14:00:12

  Starting system: 26/01/2013, 18:02:25

  System manufacturer: Dell Inc..

  System model: Inspiron 5520

  Type of system: PC x 64

  Processor (s): 1 processor installed.

  [01]: Intel64 family 6 model 7 Stepping, GenuineInt 42

  El ~ 2400 Mhz

  BIOS version: Dell Inc. A13, 15/11/2012

  Windows directory: C:\WINDOWS

  System directory: C:\WINDOWS\system32

  Starting device: \Device\HarddiskVolume2

  Local system: en - us; English (United States)

  Input locale: en - us; English (United States)

  Time zone: (UTC-05:00) Eastern (U.S. & Canada)

  Total physical memory: 6 017 MB

  Available physical memory: 4 527 MB

  Virtual memory: Max size: 10 MB, 113

  Virtual memory: available: 8 435 MB

  Virtual memory: in use: 1 678 MB

  Office (s) swap file: C:\pagefile.sys

  Domain: workgroup

  Logon server: \\PORTIA

  Corrections: 45 fixes installed.

  [01]: Package KB2712101_Microsoft-Windows-CameraCodec

  [02]: KB2727528

  [03]: KB2729462

  [04]: KB2736693

  [05]: KB2737084

  [06]: KB2742614

  [07]: KB2742616

  [08]: KB2750149

  [09]: KB2751352

  [10]: KB2753842

  [11]: KB2756872

  [12]: KB2756923

  [13]: KB2757638

  [14]: KB2758246

  [15]: KB2761094

  [16]: KB2761465

  [17]: KB2764462

  [18]: KB2764870

  [19]: KB2768703

  [20]: KB2769034

  [21]: KB2769165

  [22]: KB2769166

  [23]: KB2770660

  [24]: KB2770917

  [25]: KB2771431

  [26]: KB2771744

  [27]: KB2771821

  [28]: KB2777166

  [29]: KB2777294

  [30]: KB2778171

  [31]: KB2778930

  [32]: KB2779562

  [33]: KB2779768

  [34]: KB2780342

  [35]: KB2780523

  [36]: KB2780541

  [37]: KB2782419

  [38]: KB2783251

  [39]: KB2784160

  [40]: KB2785094

  [41]: KB2785220

  [42]: KB2788350

  [43]: KB2790920

  [44]: KB2792009

  [45]: KB2796096

  Network cards: 4 interconnect installed.

  [01]: Realtek PCIe FE Family Controller

  Login name: Ethernet

  DHCP enabled: Yes

  DHCP server: 192.168.1.1

  IP addresses

  [01]: 192.168.1.6

  [02]: fe80::57d:29de:a970:f6

  [02]: device Bluetooth (personal area network)

  Name of the connection: Bluetooth network connection

  Status: Media disconnected

  [03]: Dell 1704 802.11b/g/n wireless (2.4 GHz)

  Name of the connection: Wi - Fi

  Status: Media disconnected

  [04]: Virtual Broadcom wireless adapter

  Name of the connection: connection to the Local network

  Status: Media disconnected

  Requirements for Hyper-V: VM Monitor Mode Extensions: Yes

  Virtualization enabled in Firmware: Yes

  Second floor address translation: Yes

  Data Execution Prevention available: Yes

  C:\Windows\System32 >

• The unwanted "major updates" in Windows 7

  The update of Windows constantly presents me with 5 important to install updates, 3 of them are for Office 2003 programs that has been uninstalled (I use the 2010 version) and 2 for the 32-bit version of Office when I operate the 64-bit.

  Can I deselect each time, but it keeps bringing them upward, so I can't let settle automatically or never, he manages to do it!

  I hope you can help

  Right click on them and click Hide. Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• June 10 update of Windows 8 wiped everything on my laptop!

  I've updated automatically updates of Windows 8. App, all the files and mischief has been wiped clean - which was in a car was still there, but there were files on the c drive that are not replaceable. I'm waiting for the restoration of my system (hope to God). Why would this happen? !!!

  I guess I also need to know how to change the automatic updates to warn me before the update - how can I do this?

  Hi Sherry,

  Please contact Microsoft Community.

  Please provide us some information to refine the question:

  • Updated including windows that you have installed on your computer? Please provide the KB number.
  • Have you checked in the framework program under control panel if you have your installed program?
  • What exactly happened when you installed Windows update?
  • Have you checked if there is a Windows.Old folder created?

  Please see the link below on how to change the settings for Windows Update.

  http://Windows.Microsoft.com/en-us/Windows/turn-automatic-updating-on-off#turn-automatic-updating-on-off=Windows-8

  Hope this information is useful. Please answer us with more information so that we can better help you.

• Everyone experience slow mozilla in 32-bit desktop? However, stepping back to 16-bit works perfectly. drivers, directx updates, Flash, windows... everything checked and done.

  Windows xp sp3, ati radeon hd 3850 256 m, 6850 dual core, 2 GB of ram. In 16 bit desktop mozilla works perfectly. 32-bit looks loke is missing directx... this kind of stuttering. Switch back to 16 bits give perfect navigation. Reinstalled... updated... etc... same thing.

  You can also view the graphic section on help > troubleshooting information

  • . https://support.Mozilla.org/KB/using+the+troubleshooting+information+page

  In Firefox 4 and later Safe mode disables extensions and disables hardware acceleration.

  • . http://KB.mozillazine.org/safe_mode

  Try turning off hardware acceleration.

  • . Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

• PDF Reader does not print the update Post window 10 anniversary

  PDF print worked ok with major update of Windows 10 pre August 2016. Now, it seems to print, through print meters, but no document is entered into the print buffer. I checked the assignments earlier on the Adobe, keep this reader forum was the most recent version, even tried to use the road 'Print as Image', but 'Print as Image' click on was gray and I couldn't allow it. No joy!

  Hi williamk58991844,

  Please try "Repair Installation" under the Help menu.

  You can also check the troubleshooting provided in this KB doc steps: print troubleshooting PDF in Acrobat and Reader

  If the problem persists, let us know the dot Adobe application version you are using.

  Please also check if this problem occurs with a PDF in particular.

  Kind regards

  Meenakshi

• Hi, sorry for my English, my full authorized computers it s, number they say, I have to wait until Dec 12, everything you know about windows update and windows 10, it's a mess, I, lost master of my equipment, I wonder if anyone can helpme how to recover

  Hi, sorry for my English, my number of computers it s, they say full, I have to wait until December 12, everything you know about windows update and windows 10, it's a mess, I, lost my equipment be, I wonder if anyone can help me how to recover my subscription tanks

  also my purchases does not appear in the cloud, I have ' VM a very old usser

• I copy student PS CS6 which works fine except when I'm disconnected from online, why is this and what can I do to make this work if the connection is lost. In addition, everything will work OK if I update to Windows 8 for windows 10?

  I copy student PS CS6 which works fine except when I'm disconnected from online, why is this and what can I do to make this work if the connection is lost. In addition, everything will work OK if I update to Windows 8 for windows 10?

  Yes, Photoshop should work fine without the internet connection, as this is the standalone version.

• I had to erase my hard drive, lost everything, but I re-installed windows 7 and it would not accept my key.

  I had to erase my hard drive, lost everything, but I re-installed windows 7 and it would not accept my key, do I have to buy a new key?

  Original title: Activation of Windows 7?

  Skip entering your product key Windows 7 and complete the installation.

  When you reach the desktop, click Start, right-click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link x days before activation.

  Click on the link that says: "show me other ways to activate.

  Enter the product key

  Click next

  Select the Activation of the phone

  Click Next when you enter your key page

  Select your country

  Click Next, call the number listed

  Be sure to explain your situation to the Appeals Officer.

  Provide the installation generated when ID requested by the call agent

  They give a confirmation ID in return, enter it

  Click next to complete the activation.

  However, the requirements for the media upgrade is that you have an operating system already eligible such as Windows XP or Vista installed to use it. Since the Windows 7 end user license agreement.

  15 UPDATES. To use upgrade software, you must first be licensed for the software that is eligible for the upgrade. After the upgrade, this agreement takes the place of the agreement for the software that you upgraded. After upgrade, you can no longer use the software that you upgraded.

  So, if you are always denied, you will just have to reinstall Windows XP or Vista and let it do the verification of eligibility.

  or

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

• Update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Windows 7 to stop working.

  Original title: Updates

  The last update update for Windows 7 for x 64-based systems (KB976902) is originally the majority of my X 86 and some current applications for Win7 stop working. This includes IE8, MS Office10 and a few others. Whats with THAT! I have updates blocked for now, until the writers get it sorted.

  Hello

  The article mentions that this update cannot be uninstalled. This software update is a prerequisite to install a service pack. In addition, this update improves reliability when you install or remove service packs and updates for Windows Server 2008 R2 and Windows 7.

  http://support.Microsoft.com/kb/976902

  Since you have problems with Internet Explorer 8 and Microsoft Office 2010 after installing the update, I suspect the involvement of a third party software conflict. I would like you to put your machine in aclean boot State in order to eliminate conflicts of third party software.

  Note: Follow step 7 to restart the computer as usual.

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• I lost everything, my hard drive is blank. I tried recovering files without success. How can I reinstall windows XP without the operating drive?

  My computer came with Windows XP installed and NO CD with the operating system, I haven't bought referbished system off eBay, there is no manufacturer to contact discs... help please! = ~ D not drive for the Windows XP operating system and no way to get the drive's operating. There is no way to recover my OS. Can't afford to buy a new Windows, please I need my computer to manage my eBay business! Can you give me a way to reinstall Windows XP by using my valid license key? = ~ D

  What do you mean by "I've lost everything? What have you done or what happened? Do you have valuable data on your hard drive and hear you because she is 'empty '? What is a malware problem? Or something else?

  The Ebay seller was obliged to provide you with the means to restore the PC to its original state (Yes, I'm aware that many sellers that they don't only not this rule). There may be a hidden hard disk restore partition.
  What is the brand, model and model number of your PC? Your PC came with XP Home, XP Pro or XP MCE? What level of SP (Service Pack)? Your PC has a sticker of COA on it? If so, what operating system is listed on it?
  If you use a PC to manage a business, it is ABSOLUTELY CRUCIAL that you have a method to regularly backup all your files! I recommend to start another thread for how to do this!

• I updated to windows Vista business and I lost the Hybernation option... what I can do to recover this option?

  I updated to windows Vista business and I lost the Hybernation option... what I can do to recover this option?

  Thanks in advance...
  Joe

  Hello

  Try this link:
  http://support.Microsoft.com/default.aspx?kbid=929658

• After an update of Window Vista Business, I lost the option of hibernation

  After an update of Window Vista Business, I lost the option of hibernation

  How can I solve this problem?
  Thank you

  Hey Joe,

  What is the number of the Windows Update installed recently?

  I suggest you to follow the steps from the link and check if it helps.

  How can I enable hibernation on my Windows Vista computer?

  I hope this helps.

• Update my windows 8.1 to 10 somehow I could not update completely and I lost my administrator account

  Original title: Windows 8

  Hi guys I had a problem like this. When I updated my windows 8.1 to 10 somehow I could not update completely and I lost my administrator account. Icreated new account and try to connect, but still he said that I had been registered in the temporary profile yet, I had the chance to use. When I disconnect and try to connect again it stay on the page of waiting please two days stating at the time that failure to configure windows updates. Now I can't connect at all for the last three days. Help me guys.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, you can not connect because it is blocked to wait please and you also get error message failed to configure windows updates.

  I would be grateful if you can provide us with the following information to help us better understand the issue:

  • What is the full error message / error code that you get on your screen?

  This problem may be due to updates pending.

  I suggest you to follow the below methods and check.

  Method 1:

  I suggest you to disconnect all external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add devices one by one after the other until you discover the piece of hardware causing the issue. Then we can update driver for this particular device.

  If the problem persists, try Method 2,

  Method 2:

  I suggest you to check if you are able to connect mode safe mode by using the following commands.

  Safe mode starts Windows with a limited set of files and drivers. Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Follow these steps to start the computer in safe mode.

  a. boot from the DVD of Windows 8.

  b. click on repair your computer.

  c. click Troubleshooting, and then select Advanced Options.

  d. Select the prompt option.

  e. Once you open the command prompt, enter the following command and press ENTER.

  Bcdedit/set {bootmgr} displaybootmenu Yes

  One time completed, please restart your computer, then press F8 to access screen on startup, then press F4 or 4 to enter Safe Mode.

  Check if the problem persists in safe mode.

  If the problem does not persist in Mode safe mode, then perform a clean boot in order to check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve problems using the clean boot in Windows: http://support.microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, read the sections "How to reset the computer to start as usual after a clean boot troubleshooting" in the link provided to return the computer to a Normal startup mode.

  If the question did not resolve, try Method 3,

  Method 3:

  I suggest you to check if there is no update pending Windows needs to be installed.

  If so, then I suggest you to install the update and check if it helps.

  Hope this information helps. Answer the post with an up-to-date issue report to help you further.