Make a cluster to display in a control

Similar Questions

• Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Windows Media Player help

  I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Hi Rains27,
   
  1. were you able to play the same DVD sooner?
  2. must arrive with a particular DVD or all of them?
  3. do you have a DVD decoder installed on your computer?
  4. you use starter edition of windows 7?
  5. What is the resolution on your computer?
  6. have you installed a codec on your computer?
  If you have installed a codec on your computer the I suggest you to uninstall the codec.
   
  Method 1:
  Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
   
  Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
   
  Troubleshooting, click View all, and then click Windows Media Player DVD.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
   
  Method 2:
  
  
  
  Play a cd or DVD in windows Media player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
  
  Method 3:
  
  Try to reduce the hardware acceleration again and check if it makes a difference.
   
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click on advanced settings, troubleshoot tab and then click on change settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
  d. click OK and then click Restart now.

  For more information, see this link: thanks and regards:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• How to make a video to display horizontally on iPhone?

  How to make a video to display horizontally on iPhone?

  Not sure where but your get video, put your phone horizontally.

• How to make transparent cluster keeping only the elements inside the visible cluster?

  Hello

  Can anyone suggest me how to make transparent cluster keeping only the elements inside the cluster visible in the front panel.

  Thanks in advance,

  Vinciane

  As I said, use the space bar for what is paint. This works. Trust me.

  PS You cannot link to pictures stored on your hard drive. We don't see them. You must add them as attachments and then submit the post they get uploaded to the servers of NOR.

• Why can't I find the display on the Control Panel icon.

  original title: vista Control Panel

  Why can't I find the display on the Control Panel icon.

  Why can't I find the display on the Control Panel icon.

  Control Panel has no icon

  Start button > in the search box, type services > press Enter ket > scrollsoftware licensing...
  topic status, it must be said... Has begun
  under Startup Type, it must be said... Automatic
  If this isn't what you see, look in the left column, click Start (or restart)

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Console Bus service 12 c - cannot display/change access control strategy

  Using Weblogic 12.1.3 + FMW 12.1.3

  So I exported / imported all our existing material FMW GR 11, 1 objects in a new field of 12 c FMW.   Everything works - except that I can't click on the link for "transportation access control.  Contextual text says "connected to the role is not allowed to display/change access control strategies.

  In EM, the Application role 'MiddlewareAdministrators' shows the administrators as a member group.    Proxies that 11 g used the default "of the Everyone group" fail like proxies that can visit based on roles.

  Even if I create a new proxy, I'm stuck using the access of Transport control link.

  

  So I added the permission to my account, and the Transport link is available.  So I removed this policy and then added the authorization for the role of MiddlewareAdministrators, and it works

  Looks like I click on the 'OK' button the first time.

  But this seems to indicate a lack of permissions when fmw 12.1.3 is installed directly.  Since we are upgraded to 11g, I don't know if this authorization is also absent in 12.1.1 and 12.1.2

  I have

• How to make the progress bar display in the icon in the taskbar for WIN 7?

  How to make the progress bar display in the icon in the taskbar for WIN 7? I see Eclipse Helios can show the loading progress bar in the icon in the taskbar of WINDOWS 7 at startup.

  Is not the feature that provides JavaFX, you must write a native connection called technology such as JNI to make specific Windows API call for updating the icon in the taskbar for the application.

  Maybe you could go through the Eclipse source code to see how Eclipse and see if you can make use of the same mechanism in your application.

  More tips on how you can implement this are outside my area of expertise.

• Mac Pro, Apple Cinema display, no brightness control

  Hi, hope you can help me.

  I recently bought a (2nd hand) Mac Pro with an Apple Cinema Display 27 "monitor. El Capitan installed and fully implemented to date. For some reason my Apple keyboard brightness do not work and there is also no under display settings brightness adjustment. I read that some people had similar problems due to some bugs, but it was in 2013 with older versions of Mac OS.

  Does anyone know how I can control (mainly make it brighter) my movie screen? Right now the screen is too dark, and it is not suitable for video editing.

  My config is:

  OS X El Capitan (V 10.11.3)

  Mac Pro (end 2013) - 3 GHz 8 Core Intel Xeon E5

  64 GB 1866 Mhz DDR3 ECC

  GPU: AMD over-pants D700 6144 MB x 2

  PS as you can see in the picture there is no brightness adjustment that I can use.

  The screen is connected via thunderbolt.

  The brightness on the KB (F1 and F2) keys work?

• whenever I click on 'control panel' or 'computer', it displays "windows Explorer has stopped working". It does not display the display of the control panel.

  Whenever I want to check computer (memory) space available on each drive, click on the 'computer' logo, it does not display the response on the screen. Instead, it displays a screen with a message "Windows Explorer has stopped working" for a few minutes and then returns to the original display.  I get the same answer, whenever I click on the "control panel" logo  I need advice how to solve this problem. Thank you.

  Hello

  Did you change your computer?

  I suggest you follow the link (this also applies to windows vista)

  Explorer Windows stopped working

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

• stop the display of the controls at the bottom of the screen during video playback on windows media player

  How to stop the display of control at the bottom of the screen during video playback on windows media player

  How to stop the display of control at the bottom of the screen during video playback on windows media player

  Use the following steps and controls will NOT appear when you play multimedia player mode full-screen:

  Open Windows Media Player > tools > Options > Performance tab > uncheck "Controls display full screen" > apply/OK for the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• Windows Movie Maker-video editing is displayed with a green hue down

  AFTER SAVE AND VIEW THE EDITED VIDEO, THE VIDEO SHOWS TWO IMAGES. WE TOP THE FILM AND THE LOWER PRESENT A GREEN TINT.
  Why is that every time I have save a file film and after that I edited, the film that I saved is displayed is divided into 2.   It happens every time when I run the edited wmv. The upper part is the movie edited and on the background a green tint. I have urged all the features that make it like that. (I'm using Windows Vista) Help, please.

  Why is that every time I have save a file film and after that I edited, the film that I saved is displayed is divided into 2.   It happens every time when I run the edited wmv. The upper part is the movie edited and on the background a green tint. I have urged all the features that make it like that. (I'm using Windows Vista) Help, please.

  =========================================
  No guarantee, but it might be interesting to try to publish your
  project in DV - AVI format to a folder on your hard drive and
  then import the file .avi in DVD Maker to create a DVD.

  (The following items should help explain how to save under)
  DV - AVI)

  Windows Vista-
  Publish a movie in
  Windows Movie Maker
  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  Movie Maker Vista-
  Quality profiles / editions
  http://www.Papajohn.org/Vista-publishing.html

  And... the info... copied on the net... may be useful:

  =====

  The Green problem bar setting in Windows Movie Maker
  http://www.bernzilla.com/item.php?id=884

  When I tried to follow the directions, I was unable to find XVid on my
  computer.  So I googled XVid and then (I think) the 2nd entrance to
  Download XVid.  After I downloaded it, I could follow the directions
  bernzilla and when I published a video - Voila! no green bar!

  After thick film Green line is published
  http://www.windowsmoviemakers.NET/forums/ShowPost.aspx?PostID=105025

  =====

  Good luck...

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Display the PTZ controls or intercept entry with rtsp video feed

  I have my application calling a video live feed on RTSP using the control of the drive as follows:

  MyPlayer player = javax.microedition.media.Manager.createPlayer (mediaUrl);

  Player p = myPlayer (player);

  p.Start ();

  What I have to do is display a control for PTZ controls bar or intercept the wheel movements, pressure on the keys or gestures (for storm) - is this possible using the Media Player embedded? If not, is there another way I can load the video that would allow this?

  Thank you

  Edit: with the software 4.3 If this is not a hard limit, I can dictate a software version of device if necessary

  Sorry - it seems that I can use the keyChar already defined in my screen parent class to intercept keys - I assume that the same will apply if I implement hooks for the movement of the wheel and gestures... I didn't know if I had to do something special, but it seems as if I'm not like these notifications bubbles to the top

• Apex 5 display image field, control width and height on the form page

  Hello everyone,

  I try to display the image from a blob directly column on the page, it does not work well, here's my question, how can control the width and height of the screen image field, because its changing dynamically the size of the screen according to the original dimensions, I want to set the dimensions.

  Any help will be appreciated.

  Concerning

  Anil

  set the width and height attributes in the attributes of the image html elements

  for example Width = "200" height = "100".

• How can I make my swf is displayed correctly in the browser windows?

  I want to publish my Flash file and make it accessible by a link, but it does not display correctly. All angles or curved edges look jagged and uneven. Straight lines are fine, but everything else seems messy. In addition, my last swf is amplified to fill the window of the browser for a reason, which looks terrible. I didn't know the question before scaling and I can't understand what the problem is this time. Files I posted before still displayed to the normal size of the file work, but it works differently. I use Flash CS6, and I tried to download and view my swf in Chrome and firefox. The swf dimensions are 1280 by 720. Thank you

  If you link directly to the swf instead of an html page that loads the SWF then the swf will size itself to fit the browser window.

• need to configure a connection wireless network with static IP address to make a panasonic wireless display of work on the virtual machine

  Hi, I'm new to macs and Fusion. I have a MacBook Pro 13 mid-2009, running 10.5.7 and Fusion 2.0.5, running Win XP Pro SP3 as the virtual machine (not in a bootcamp partition separate). I added a second network as a bridged network adapter (first one is set to NAT). I'm trying to connect my wireless panasonic (802 11b) to the virtual machine display, as I do on my old sony PC. Normally, I turn on the wireless on the PC, find the network wireless in Win XP and configure my SSID and necessary of static IP address and configure the NIC to search only ad-hoc connections (non-infrastructure). I also turn off the firewall so that it can work. There is a panasonic program runs on the PC (which I also installed on the virtual machine) makes it all happen once I have the connection. So the place that seems to be stuck, it's that I can't find a wireless to configure network adapter since--what the VM is a NA standard, so there is no place to specify the SSID, ad-hoc and disable the WEP key. Someone has ideas how to go beyond my current state?

  In addition, the panasonic only works at 800 x 600 for the display resolution, so it will automatically change the graphics settings. I guess that's not a problem on the VM, but thought I would ask in advance in case someone sees a problem with it.

  Thank you very much.

  Larry

  If the only way you can connect to the device is via WiFi, then you will need to provide your own WiFi USB network adapter to the virtual machine because Fusion presents only the network card Ethernet wired to the Virtual Machine, regardless of the host network adapter is the main map.