Make the database for planning

Similar Questions

• How to make a database for an application

  How to make a database for an application. I can create it outside somewhere in my computer and then copy it into the current folder? or is there a standard way?

  Yes you can do it outside if you wish, two programs I've used SQLite Browser and sqlitestudio two do work but sqlitestudio has more features and is the one I now use exclusively.

  There are many others, however, simply search for sqlite application in google.

• How to check the growth of the database for a database on ASM?

  Hello
  
  I have been using the following script to check the growth of the database (for DBs on file system):
  

  SELECT b.tsname tablespace_name ,
    MAX(b.used_size_mb) cur_used_size_mb ,
    ROUND(AVG(inc_used_size_mb),2)avg_increas_mb
  FROM
    (SELECT a.days,
      a.tsname ,
      used_size_mb ,
      used_size_mb - LAG (used_size_mb,1) OVER ( PARTITION BY a.tsname ORDER BY a.tsname,a.days) inc_used_size_mb
    FROM
      (SELECT TO_CHAR(sp.begin_interval_time,'MM-DD-YYYY') days ,
        ts.tsname ,
        MAX(ROUND((tsu.tablespace_usedsize* dt.block_size )/(1024*1024),2)) used_size_mb
      FROM dba_hist_tbspc_space_usage tsu ,
        dba_hist_tablespace_stat ts ,
        dba_hist_snapshot sp,
        dba_tablespaces dt
      WHERE tsu.tablespace_id    = ts.ts#
      AND tsu.snap_id            = sp.snap_id
      AND ts.tsname              = dt.tablespace_name
      AND sp.begin_interval_time > sysdate-7
      GROUP BY TO_CHAR(sp.begin_interval_time,'MM-DD-YYYY'),
        ts.tsname
      ORDER BY ts.tsname,
        days
      ) a
    ) b
  GROUP BY b.tsname
  ORDER BY b.tsname;

  And I think that he always gave me good results until I ran this script on a database (10.2.0.5) on ASM.
  
  Is it because the databases on the ASM are maintaied differently, OR do most proabbly there was no activity on this database in the last 7 days? I even ran this query for last 90/180 / day and it is me again after results:
  

  TABLESPACE_NAME                CUR_USED_SIZE_MB AVG_INCREAS_MB
  ------------------------------ ---------------- --------------
  SYSAUX                                   574.38            .36
  SYSTEM                                   514.69              0
  DATA                                    1593.25              0
  IDX                                         .06              0
  UNDOTBS1                                  69.06          -3.84
  USERS                                     96.13              0

  Thanks in advance!

  I have no reason to believe tablespaces under ASM are maintained differently, so the most likely explanation is the change in the activity of the DB.

  What is your AWR retention? The default value is 7 days, so if yours is set to the default value, and then by running the query for 90/180 days you would not give more information.

  If you want to get the output of your scripts, you may need to adjust the AWR retention and your tablespace SYSAUX respectively.

  If the DB is managed by Oracle Enterprise Manager (OEM), you can make tablespace forecast based on the measurements taken by the OEM. I did a presentation on this (NYOUG, VirtaThon) just now:
  http://iiotzov.files.WordPress.com/2011/08/iotzov_oem_repository.PDF
  http://iiotzov.files.WordPress.com/2012/05/OEM-repository-a-second-look.doc

  Lordane Iotzov

• Is there a way to make the shortcuts for Internet Protocol Version 4?

  Hello

  I have the Internet Protocol V4 settings:

  IP address: 192.168.0.101

  Subnet mask: 255.255.255.0

  Default gateway: 192.168.0.1

  Preferred DNS server: 192.168.0.1

  I want to know if there is some way to make the shortcut for these settings so I can click on this shortcut when I want to configure the Internet Protocol V4?

  Thank you

  Rami,

  Yes, you can do what you want.  See this forum is different for different networks available static IP thread and the thread of TechNet that it links to is it possible to assign a static for each TechNet netowrk IP address

  Once you configure the properties they should stay that way so please can you explain why you want to be able to keep these values reset?

  Denis

• A web application from merger can also run on Smartphones? So what of the database for mobile?

  Mr President.

  A web application from merger can also run on Smartphones? So what of the database for mobile?

  Concerning

  Any web application can run on smart phone because you access this browser so no need of database or application server on your mobile phone

  It's the same access to a Web site on mobile

  If you are talking about the mobile app

  check - http://www.oracle.com/technetwork/developer-tools/adf-mobile/overview/adfmobile-1917693.html

  Ashish

• I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

  I just make the payment for the license, after using the month trial. and when I want to use the programs and said that I must pay. and received e-mail confirmation of payment, that is not what I do

  
  

  Please see the links below.

  • Creative Cloud applications unexpectedly back in the test mode. CCM, CS6
  • Applications creative Cloud back in test mode after an update until 2015 for CC

  Also, make sure you use the right adobe ID to log in.

  Hope this will help you.

  Kind regards

  Hervé Khare

• How can I make a database for my site (muse)?

  How can I make a database for my site (muse)?

  locking this post as it seems to be a double post

  How to create a base gives pour my website (muse)?

• How to check if the database for DRDA gateway is installed and configured.

  Hi all
  
  How can we check if the database for DRDA gateway is installed and configured.
  
  Our operating system is AIX 5 L 64 bit OS.
  RDBMS: 11.2.0.3
  
  Kind regards

  Duplicated
  How to check if the database for DRDA gateway is installed and configured.

  + - locked thread-+.

  Nicolas.

• How to connect to the database for all reports EN

  Hello
  
  I've developed 100 reports in the client of the production, test purpose that I moved
  test client. How can I connect to the database for all reports at once?
  
  Concerning
  Thaer

  Hi Thaer,

  You can connect to the connection of database for all reports through the workspace of HFM.

  Connect to the HFM area--> click--> Explorer, and click Tools--> click Manager of database and respective connections of Production Instance to the Instance of Test required information and that you will be able to connect to the Test database for all reports both change.

  Kind regards
  Srikanth

• Changes in sqlnet.ora may make the database down?

  Hello
  
  I changed to enable authentication of the os giving the NTS parameter in sqlnet.ora
  
  Today the database was down.
  
  Is that what makes the database down?
  
  I couldn't find anything in the alerts log
  
  Help, please
  Arun

  Hello

  Concerning the sqlnet.ora setting, it is possible to set two values as follows, but it is not always well managed
  (in a version NONE is ignored):

  SQLNET. AUTHENTICATION_SERVICES = (NONE, NTS)

  Furthermore, it affects the connections only (anyway be careful before changing this parameter).

  Thus, it is likely that the root cause of your accident.

  Please, post more info on the Alert.log and Event Viewer, as previously posted, it might help to understand
  What happened.

  Hope this helps.
  Best regards
  Jean Valentine

• Configuration of the database for the deployment of Hyperion Planning 9.3.1

  Hello
  
  I'm deployment Hyperion Planning 9.3.1. I read in many places that I need to configure a separate database for each component rather than use a single. Nobody knows the ideal of data distribution if I install the following components:
  
  -Hyperion Shared Services
  -Essbase Server
  -Essbase Administration services
  -Essbase service provider
  -Oracle Hyperion Enterprise Performance Management architect
  -Planning
  -Hyperion reports & analysis
  
  Can I configure EPMA and planning on separate databases as well? As for the configuration of data source?
  
  Any help would be appreciated.
  
  Thanks in advance
  
  Shehzad

  Hello

  Best practices during the installation would be to create the DB sql distinct for each of your products as follows (you don't have to follow the naming conventions)

  -SSP Hyperion 9 (hypHSS)
  -Essbase Server (without SQL repository Req'd)
  -Essbase Services Administration (hypEAS)
  -Essbase provider Services (without SQL repository Req'd)
  -Oracle Hyperion Enterprise Performance Management architect (hypEPMA)
  -Planning (hypPlanSys)
  -Hyperion Reporting & analysis (hyper)

  Remember, if you are creating applications to planning you will also need to create a db SQL distinct for the application, as well as planning SQL db.

  DataSource configurations can then raise the relevant DB.

  Hope this helps

  J

• Updating of the database of planning

  We have a planning application that is used as follows: the contour is administered through planning, but everything else (like data entry, etc.) takes place using excel. We end up with a lot of fragmentation and I wanted to install a script for fragmenting the Pb from time to time. This is because it is an app planning will a MaxL script running on essbase ('alter database force restructuring") make the case or restructuring must be done with refresh via Planning-> manage-> refresh database databases?
  
  Thank you.

  If you want to defragment then Yes, you can run a maxl restructuring and she doesn't have to be an update of the planning.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Restrict access to the database for the upgrade of the application

  Hi all

  We're performing an upgrade of the application that requires us to perform a lot of scripts on our server Oracle EE 11.2.0.4.

  This specific database has around a website based end and a front end based client, but it is also accessible on the network through TNS SQLPLUS/Toad, ODBC, JDBC etc.

  For obvious reasons, the upgrade, I want to make sure that no one else that the DBA can access the database. Usually change us the listening port of 1521 to let say 1544. This prevents all access.

  But now we run in a physical Data Guard with two Standby configuration so I don't really want to play with the listener ports. The upgrade must propagate changes from primary to Standby. I could interrupt them temporarily, but I would like to avoid that if possible.

  Another way I thought would work was to stop the database and open it in restricted mode. But before that, I would need to grant the privilege of the Session to RESTRICT all users upgrade scripts using (around 5 users).

  This approach using the restricted mode seems reasonable?

  Other opinions would be much appreciated.

  Thank you

  This is exactly what restricted session is for. You can do online and then kill a session is currently connected. No need to stop:

  orclz > alter system enable restricted session;

  Modified system.

  orclz > change system disable restricted session;

  Modified system.

  orclz >

• Configuration of the database for resuability adapter

  Hi all
  
  I have the scenario where I need to insert/update/select the tables in the database over to a BPEL process IE an array are accessed by several BPEL process.
  
  For this
  
  (1) one solution is to create maps in all BPEL processes and use them. But there duplicacy IE same adapter code in several places. And also in case of change in the structure of the table (which is expected), I have to change cards in all BPEL processes.
  
  
  (2) the alternative is to create maps and BSE and deploy them in the service of the BSE, and call them from BPEL, simply giving url wsdl in partner link.
  
  It works fine but the problem is that it doesn't throw fault fail one-way operations (insert, update) database. My BPEL process continues even if the operations fail.
  
  However it get blame when something goes wrong in an operation (Select Select) two-way. For ex. If I specify a column name that does not exist in the database table, he throws the fault and I'm able to catch in Tote in BPEL.
  
  In the case of 1) above where I configured cards wihin process DB, I get the fault in BPEL and if I can catch and treat them accordingly.
  
  I need to receive without cards configured in BSE during the insertion or update fails. Is there a way to do this? Or is there another way I can configure database in one place cards and use in multiple places?
  
  I use Oracle SOA version 10.1.3.4 MLR #6 and jdev 10.1.3.4.
  
  
  -Sam

  Your second option is the best. Have you thought to implement procedures to make the inserts etc. That way if they don't will answer you a fault.

  see you soon
  James

• How to make the setting for the microphone internal on my Dell Vostro 1540/1550?

  The speakers work, but the microphone does not seem to be connected.

  Hello

  ·         What operating system do you use?

  ·         Were there recent changes made on the computer before the show?

  ·         You get the error message?

  Method 1:

  Try using the Audio playback problems troubleshooting to solve the problem. It search common problems with your volume settings, your sound card or driver and your speakers or a headset.

  Open the troubleshooting of Audio playback

   

  Method 2:

  I suggest you to update the latest audio drivers from the Dell website and check if it helps

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  See also:

  Tips for solving common audio problems:

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-fixing-common-sound-problems

  Method 3:

  I suggest you try these steps,

  Step 1: Using Windows Sound Recorder to test the microphone.

  You can use this section to find out if the computer can record a signal from the

  Microphone and play again. Use Windows sound recorder to create an audio file using the following steps:

  a. Click Start, all programs, accessories, and then click Sound Recorder.

  b. click start recording and speak into the microphone.

  When you are finished recording, click on stop recording.

  Screen automatically opens.

  Type a file name and click Save. A type WAV or WMA file is created in the Documents folder.

  If you can record the Audio using the Microphone using the method above then theMicrophone works well.
  Now, it should work in any application that Supports Microphone. If the computer records the audio using the method above, then it might be a problem with the Microphone settings. Now, check the following settings.

  Step 2: activating the Microphone.

  a. Click Start, all programs, accessories, and then click Sound Recorder.

  b. click start recording and speak into the microphone.

  c. Recording tab showing a signal detected for the Microphone device

  Note: must have green check mark on that Microphone icon. Is no green check mark, this means that it is disabled. If there is no green mark on micro it never works. To activate the Microphone, right click on Microphone and click Activate. If you do not see the Microphone in the list, right click on the white space and select devices see the disabled. Then, you'd see the Microphone. However, if you don't see the green check mark on it, right-click on it and click Activate. Select Microphone and click on set as default (if defined as default button is active).

  If you see the green checkmark on Microphone the Microphone really works.

  Step 3: Increase the Microphone sensitivity and non-disabling the Microphone.

  a. Select Microphone and click the properties button.

  b. move the slider up to 100% of its range.

  c. If the mute is enabled, click the button mute to reactivate the device.

  d. If the Microphone Boost is available, amplify the volume.

  e. click OK to make the changes.