Make use of crossing call instead of Non-traversal on Cisco VCS - C

Similar Questions

• Question of the use of non-traversal license

  Hello world! Wanted to ask a quick question. If endpoint makes a call to another endpoint (via WAN) and each of them is registered in VCS on their sides and then if it will use the non-traversal license of VCS or just one of them?

  Thank you

  Each call and the end point that enter or exit the VCs will have 1 license appeal.  What determines the type of license, either Non-traversal or crossing is less (confirmed by the help guide).

  Calls of traversal VCS: VCS standard video or audio calls, including business-to-business calls, B2BUA calls (for encryption of the media or ice) and interoperability or sent through gateway calls to third-party solutions where the VCS as well takes the call signaling and media of the call. Each call consumes a license of traversal appeal.

  VCS non-traversal calls: here's the VCS standard video or audio calls where the traffic goes through VCS, but the media passes directly between the endpoints, or between an endpoint and another system in the direction of the call. Each call consumes a license non-traversal call. Note that Lync B2BUA calls are classified as non-traversal is called (even if media cross the VCS).

• Questions call non-Traversal

  Hi all

  I implement some new devices of telepresence:
  Site has
  VCS-control (X8.1)
  VCS-Expressway (X8.1)
  MCU 5310 (4.4)
  C40 codec (7.0.2)

  Site B
  (7.0.2) codec C20
  The site has different subnet

  I have enabled H.323 & SIP on the VCS - C and tested several calls between Site A & b. whenever calls go out H.323, SIP, or SIP to H.323 from the C40 for the C20 or vice versa, that there is no problem. Both sites receive video and audio.
  Whenever I force the same protocol. That is to say, H.323 to SIP for SIP or H.323 and making the same calls, the site B (C20) is not video of the Site (C40). However the C40 receives both video & audio of the C20. What is interesting, is that if I do the same calls of the MCU, which is also in Site A, then there is no problem. So the problem is between the C40 and C20.
  Since I'm not physcally on sites because I do this execution remotely, I can count only on the stats I get from the GUI. I have attached a photo taken of the customer from the screen of the C20.

  Calls:
  Calls crossing
  C40 - C20 H.323 - SIP - call ok
  C20 - C40 H.323 - SIP - call ok
  C40 - C20 SIP - H.323 - call ok
  C20 - C40 SIP - H.323 - call ok
  MCU - C20 H.323 - H.323 - call ok

  Non-Traversal calls
  C40 - C20 H.323 - H.323 - no video received the C20
  C40 - C20 SIP - SIP - no video received the C20
  C20 - C40 H.323 - H.323 - no video received the C20
  C20 - C40 SIP - SIP - no video received the C20

  This suggests that there is only a problem on the C20 in non-traversal calls. I don't want to use licensed traveled between these 2 points of termination.

  Thank you for your help. Any input would be greatly appreciated.

  -Greg

  When you make an H323, SIP call, all media is 'mandated' by the VCS, so they would still work even if they cannot ping each other.  When you do a non-traversal call, media flows directly between the endpoints.

  Ping a C-Series, connect to the codec via SSH (same credentials as the Web browser), and then type systemtools network ping 10.1.1.1

  Where "10.1.1.1" is the IP address of the remote end point.

• I have a bank I have to use Google's browser instead of safari to be able to download and view my monthly statement.  Auto-complete in safari on id and psd won't AutoFill to this browser.  What can we do to make it right?

  I have a bank I have to use Google's browser instead of safari to be able to download and view my monthly statement.  Auto-complete in safari on id and psd won't AutoFill to this browser.  What can we do to make this right?

  I have safari 9.0.2 have a MacBook Pro.  OS X El Capitan version 10.11.2 for operating system

  If they are having problems with the Safari browser, you must contact the Bank to know if their site is compatible with Safari.

  Good day.

• How to make/receive the phone call from a laptop connected to the smartphone via bluetooth?

  Dear community of Microsoft,

  I have a smartphone (Samsung SCH-I759) which I want to connect to a laptop running Windows 7 Professional, then I could make/receive the phone call on the cell phone.

  After browse around, I saw several methods to do are pretty simple. Activate bluetooth on both devices connect, match and set - the bluetooth device menu.

  When I followed these instructions, I was able to pair the devices but the ability to use the bluetooth connected as a phone smartphone does not appear. Instead, I have less accessible services in the menu. Here is the screenshot:

  

  For those who have been successfully pair and use their laptops as phone, would you care to share the how-to?

  Thank you

  NALA Jati

  It depends on the abilities programmed into your phone. Your photo, I can say that is not possible on your phone, then you will not be able to do.

  If you want to make/receive calls on your computer, you could try to use Skype or Google Voice.

• Are there other ways to make more than 1 kaycode instead of doing one thing to switch-case

  OK, naked with me, because my English is not so good. And I'm still not a professional have

  I did a dance game. A game that objects will fly up to the target and you must press the right keys for them. I know this is kind of the issue on several keypress thing. But I tried to search on them. I still can't understand. And... because I'm almost done my project, but the abovemultiple-keys -How-to-do- it, I might have to recreate everything, start from 0.

  I made a function to put on screen the CSM and managed by a class.

  Then, I made a function to detect if the target hit to the right position and you press the right keys.

  Also, if you press the wrong score will be decressed.

  I "did not only a fuction detect keys and tell what to do.

  So my question is "Is there other ways to make more than 1 kaycode instead of doing one thing to switch-case, for example?"

  It is a part of my code.

  var p1:Number=37;// 37Left(Left)
  ///
  
  function makeLvl(e:Event):void
  {
            if (sTime < sTempo)
            {
                 
                      sTime++;
            }
            else
            {
          
                      sTime = 0;
                      if (SelectedLvl[sArrow] != 0)
                      {
                                var currentArrow:MovieClip;//this will hold the current arrow
                                if (SelectedLvl[sArrow] == 1)
                                {
                                          //place a left arrow onto the stage
                                          currentArrow = new A1();
                                          //set the _x value of the arrow so that it is in the
                                          //right place to touch the receptor
                                          currentArrow.x = 120;
                                          //set the arrow's y coordinate off of the stage
                                          //so that the user can't see it when it appears
                                          currentArrow.y = 400;
                                          currentArrow.arrowCode = p1 ;
                                          addChild(currentArrow);//add it to stage
                                }
  ////
  
  
  
  touchL = false;
  
  ////
  
  for (var i:int = 0; i<numChildren; i++)
            {
                      var target:Object = getChildAt(i);
                      if (target.arrowCode != null && target.hitTestObject(mcReceptor))
                      {//if the object is an arrow and the receptor is touching it
                                if (target.arrowCode == p1)
                                {//if left arrow
                                          touchL = true;
                                }
  mcTxt.txtScore.text = 'Score:  ' + score;
            mcTxt.txtCombo.text = 'Combo:  ' + combo;
            mcTxt.txtScoreString.text = scoreString;
  }
  ////
  stage.addEventListener(KeyboardEvent.KEY_DOWN, checkKeys);
  function checkKeys(e:KeyboardEvent):void
  {
            //if the left key is down and no left arrows are touching the receptor
            if (e.keyCode == p1 && ! touchL)
            {
                      changeHealth(-10);//make the health go down
                      combo = 0;
                      scoreString = 'Bad';
            }
  beginCode();
  ////
  
  
  
  

  I try to put a table and display the number to fit it in, but no luck.

  Maybe I used the wrong table?

  Any ideas? Any suggestions? -Please...

  Thank you so much.

  This may be more advanced than what you're ready for, but it is a way to do

  http://blog.Iconara.NET/2008/03/30/separating-event-handling-from-event-filtering/

  I actually did this with a 'chain of responsibility', where each link has a reminder of determineResponsibility and the handleResponsibility callback. If it does not have responsibility (because she is not responsible), it sends the request on the following link in the chain, which manages or does not work. If you are not familiar with a reminder, it is a variable of type function so that you can change what the function is called repeatedly.

  To clarify, you must provide the first link in the chain, a reference to the event, then call something like a method process() with a reference to the event. This would call determineResponsibility(), which would look at the event to see if the features of the event are what you want. If it returns true, it would be called handleResponsibility(). If it returns false, you would call process() on the following link. The advantage of this design is that you can add and delete links to manage the changing needs of your system. For example, if the character hits something that disables the good movement until the user presses the arrow to the left, remove the link to the right arrow until the user presses the left arrow, then turn on again.

  Post edited by: Amy Blankenship

• Unable to make or receive phone calls after installing IOS 10

  Unable to make or receive phone calls after installing IOS 10

  Hi Drovers run,

  I understand that after updating your iPhone to iOS 10, you are more able to send or receive phone calls. I know it's important to be able to use your iPhone as a phone, so I'm happy to provide assistance.

  Read this article to help to make and receive calls:
  If you cannot make or receive calls on your iPhone - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Caveat "the formula uses a Boolean value instead of a number" would dismiss

  Hello!

  I do a "Calculator" to get estimates of price for the projects, according to which processes the customer wants.

  Rates for each process are added in another table, and I use the list of control buttons to enable or disable the various processes.

  Here is an example of a formula:

  

  D3 determines if the part of the project modeling is performed, so the price will be or will not be calculated.

  If D3 is true, the result is multiplied by 1, give me a positive amount. If false, the result will be multiplied by 0, 0, so nothing to add to the final cost he send me some.

  Same for B4 in the same formula.

  This formula is repeated all over the chart, with minor changes to add more complex options, but it's all the same.

  Everything works fine, but I got those blue triangles warning me of "the formula uses a Boolean value instead of the number". That's fine with me, I like the use of the Boolean types, and they make my formulas work well in my calculator. How can I reject the blue triangles?

  

  They are a little annoying. And they do not really correspond with the general style of my calculator.

  I saw someone talking other types of formulas, with SEARCH and yews, but who is really complicated and I don't know how to do... Especially for a simple calculator

  Is there a way to simply do not display warnings?

  Using the version 3.6.2 on a MacBook Pro, OSX El Capitan 10.11.5

  Thank you!

  Hi Sinshassan,

  I don't know a way to escape your blue flags except to make a formula which is consistent with the expected numbers. It is not difficult.

  

  My formula D2 = yew (AND(D1,B2), C2, 0)

  The IF statement tests the two D1 AND B2. If they are true, then it indicates the value of C2 your carbon Modeling::High Poly #1, if one or both are false (unchecked) then 0 is displayed.

  Give it a try.

  Quinn

• Cannot make or receive phone calls after the upgrade to iOS 9.3

  Can't scream: cannot make or receive phone calls after the upgrade to iOS 9.3

  SOLVED

  Went into settings,

  Cell phone,

  Cellular data options,

  then change the setting to EnableLTE OFF,

  It's for my at & t att, iphone 6 s

  No joy for me.  I can't make calls, but I can not receive or use call forwarding.  So frustrating!

• I used to write in two languages (English and Italan). When I use my Mac, it's easy: I just change the language, and my keyboard is the same (i.e., International English). What I use my iPad pro, instead, he also spends my hardware keyboard.

  I used to write in two languages (English and Italan). When I use my Mac, it's easy: I just change the language, and my keyboard is the same (i.e., International English). What I use my iPad pro, instead, he also spends my physical keyboard, so that for example if I type [keyboard I get an e. It is very annoying and makes the keyboard quite useless. Keeping fixed language I would get bad suggested words.

  You will need to define your physical layout being the same for English and Italian in settings > general > keyboard > keyboard > keyboard material

• my iphone 6 is unable to make or receive phone calls, it just freezes how can I fix this problem?

  sound was about a month and my iPhone 6 won't make or receive phone calls and if I try to make a call it will juice gel ANDS pie acing upward it is when someone tries to call me at first, he would make a weird noise but now its just silence and does nothing, but crashes until I force shut it down.  and I want to know how I can fix it if possible and also I tried to reset my phone and take the sims card out and also to reset the cell settings.

  Hi moraless___,

  Thank you for using communities Support from Apple!

  I understand that you are not able to make or receive phone calls on your iPhone because it becomes unresponsive. Is this the only feature that does not work as expected?

  I see that you have already tried to restart your iPhone and the relocation of the SIM card, but the issue continues. To continue troubleshooting, there are a few steps, I recommend you.

  First, close the phone completely application.

  Force an app to close iOS - Apple Support

  Once the phone has been closed, restart your iPhone again, as you did previously.

  Restart your iPhone, iPad or iPod touch - Apple Support

  If the problem persists after these steps, please let us know so that we can continue to help you troubleshoot and fix this problem.

  Best!

• Cannot make or receive phone calls after the upgrade to iOS 9.2

  Last night, I could make and receive phone calls. This morning I upgraded to iOS 9.1 to 9.2, and now I can't make or receive calls.

  Any call I make - other iPhones, to landlines, whether on my list of Favorites or not - says 'call X... '. "(where X is the name of the contact - X is omitted if I don't dial a contact). After a few seconds, the phone says "Call ended." and I get three quick tones.

  When they call me, it goes to voicemail once they hear 1 or 2 rings. I don't hear anything. The call does not appear in the 'recent' folder, but I received a voice message.

  I don't have to "do not disturb" lit.

  My iPhone is a 4 s, which can be a key because my wife has a 5. She has just upgraded and has no problem with calls. We are both on the Sprint network, using 'Ting' which is a dealer - so our actual provider's Ting. My phone says "Version 9.2 (13 c 75)", carrier "Sprint 23.0" and model MD377LL/A."

  I turned the phone on and off several times, and also to do a reset (now hold both power and home until the apple logo appears). neither helped. I double-clicked the original key and removed the phone application and all other applications, then restarted the phone application, which also helped.

  WiFi works.

  A related issue is to: IOS 9.2 update .

  OK, now it works.

  I think that what I had was specific to my carrier - as well as anyone with this problem likely needs to communicate with their provider!

  For Ting (Sprint), here's what I had to do:

  1. to connect to a Wi - Fi network

  2. dial # 873283 #.

  3. press the call key

  4. press "Start Service Update" and wait a minute or two.

  5. press on "Full Service Update" and wait a minute or two for the phone to reconnect to the Sprint network.

  6. once the upper line shows that Sprint is connected, I could make and receive phone calls.

  Greg

• I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard

  I play world of warcraft and use a program called ventrilo to talk with other players. the problem I have is my game sounds can be heard.
  Vista makes my headphones 'speakers', so when I use a program called ventrilo to talk with other players in my game sounds are heard through ventrilo. My headset is a headset/microphone generic plug-and-play.

  When I run not WoW, I can hear my own voice through the headset speakers when I talk.

  I want my headphones to work so I can hear my friends talking and the sounds of the game, but I don't want the game sounds to be filtered on the server for voice chat

  Any help would be much appreciated. I asked the same question to Geek Squad and their response has been to try to charge me $49.99 + tax for one of their "agents" can remote in and fix it. Do not use them unless you have: P

  Hey CassiusVa,

  Welcome to the Microsoft Answers Forum!

  Since when are you facing the issue?

  Can I know the version of Ventrilo you use on your computer?

  It may be that World of Warcraft focuses on your audio hardware.  You can try to reduce the audio settings in WoW to see if this makes the use of Ventrilo better.  It may also be a driver problem.  I would check to make sure that you have the latest drivers for your audio device.

  Use the following steps to ensure that the audio drivers are up to date.

  1. connect to the Internet.

  2. click on start and enter the Device Manager in the start search field.

  3. click on the plus sign next to sound, video and game controllers.

  4. right click on the name of the sound material and select software update of the driver...

  5. click on search automatically for a driver updated and wait for Windows to update the driver software.

  6 Windows checks a remote Web site to see if the update of the driver software is available.

  * If an update is available, let Windows install the update.

  * If an update is not available, proceed to the next step.

  7. once the update is successfully installed, test the microphone.

  Please follow the steps below and check if you still have questions echo.

  Go into Ventrilo Setup and select mixer for the sound card, which will be the audio input (as determined by the "Input device" option) device. This will populate the Mux and line options. Normally it would take only a Mux. It is possible that you may have many options of the line. Go ahead and select "Microphone" or anything that is appropriate for the input line and then click OK.

  This should solve the problem.

  Please note that you select mixer, mux and line will allow the "Hardware Volume" slider This gives you the control hardware on the audio input signal and is the best way to control how strong you are. Setting the cursor to halfway better seems to work for most people, but it will be hardware and system load.

  You can also browse the links for more information on ventrilo and try to contact them if the problem persists.

  http://www.Ventrilo.com/FAQ.php

  http://www.Ventrilo.com/about.php

  http://www.Ventrilo.com/dlprod.php?id=1

  Let us know how it works.

  Kind regards
  Technical support of Microsoft-yama.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Courses and non-traversal calls

  Hello

  Can someone explain in simple terms what are courses and non-traversal calls?, what is the difference? And also the VCS control below must traversal licenses?

  CTI-VCS-CONTRL-K9

  Control of VCS

  Thanks in advance.

  If you have two endpoint C-series (i.e. CTS-SX20) both recorded on VCS control and also capable of reaching out directly between them (a routing), then in general the call will address as non-traversal call Endpoint, so no license courses will be necessary.

  However if these Endpoint calling each other, but using different protocol (i.e. an end point registered in VCS control only with H323 and other endpoint registered on the CV with SIP), or different IP version (that is to say one with IPv6 and other with IPv4 registration), then control VCS remain media routing in order to manage such scenario of interoperability which will require licensed traversal appeal.

• Sx20 does not seek to make the IP to call with H323, after the first attempt failed with SIP

  Hi all

  We use the Sx20 SIP with CUCM registered devices and also register H323 with VCS - c... There are also a few registered with VCS - E external SX20.

  Sx20 > CUCM > VCS - C > VCS-E > Sx20

  the defaultcall Protocol is selected Auto (SIP, H323) on devices SX20.

  SX20 on cucm cannot call IP when defaultcall is selected as auto, it is able to call IP through VSC - C only when defaultcall is selected H323 on Sx20.

  We cannot change the defaultcall as H323 because we cannot make a call since sx20 on CUCM sx20 on vcs - e

  someone has an idea to make the two whole scenerio? Perhaps there is a feature to do this on sx20?

  your response will be appreciated.

  Thank you.

  Take a look at these examples of configuration - Dial IP addresses registered to CUCM endpoints with VCS/highway. This would work in your environment.

  Kind regards

  Acevirgil