Make windows built on 32-bit applications to work on 64-bit also

Similar Questions

• Please specify: can I make Windows 7 ultimate (64 bit) to Windows 8 Pro (64 bit) for $40 with a clean install?

  Hiya!

  Looking to upgrade, but I don't want to upgrade in the usual way. I want a clean install.

  I don't want to format the HARD drive and install from scratch. I might even want to buy a SSD and install Windows 8 on my new SSD.

  Basically, is there a way to only pay $40, but get to install it properly?

  Is this ok? He's trying to force me to buy the OEM version?

  How does it work?

  Oh, also, I'm in England so I'll use the UK (£25) version rather than the American version, but it's the same I think.

  I was wondering if it will not work properly or if I have to buy the OEM version, because it does not recognize that I have had Windows 7 originally.

  See you soon!

  Hiya!

  Looking to upgrade, but I don't want to upgrade in the usual way. I want a clean install.

  I don't want to format the HARD drive and install from scratch. I might even want to buy a SSD and install Windows 8 on my new SSD.

  Basically, is there a way to only pay $40, but get to install it properly?

  Select keep anything during installation is to do a clean install:

  

  Besides being able to keep your Windows settings and personal files, you can keep your personal files too during the upgrade to Windows 7. If you choose No, Windows 8 place your files in a folder named Windows.old. You can delete the Windows.old folder

  Is this ok? He's trying to force me to buy the OEM version?

  How does it work?

  Oh, also, I'm in England so I'll use the UK (£25) version rather than the American version, but it's the same I think.

  I was wondering if it will not work properly or if I have to buy the OEM version, because it does not recognize that I have had Windows 7 originally.

  See you soon!

  How to reinstall Windows 8

  You have two options:

  If you want to reinstall Windows 8, which means remove applications and personal files and settings, you can use the reset and refresh. This is equivalent to a clean install.

  To do this, follow these steps:

  · Press the Windows key + i on your keyboard to show the charms (if you use a touch screen: touch the right edge of your screen and drag your finger to the left)

  · Click settings

  · Click change PC settings

  · Click general in the left column

  · In virtue remove all and reinstall Windows, click Start

  Then follow instructions that will be provided on the screen to reinstall Windows on your PC.

  Option 2:

  If you create an installation DVD or a USB bootable, you can use them to reinstall Windows. First, you will need to reinstall license qualification, then begin the upgrade to Windows 8. License of qualification means that you will need to reinstall Windows XP, Vista or Windows 7.

  Option 3:

  A workaround for this situation is to create a system image of Windows 8, just after you have upgraded. So if your drive plant, you can simply restore the image on a new hard drive or restore the image on the same drive, if you want to reinstall Windos 8.

  See the following for instructions on how to create an image of the installation process of Windows 8:

  http://www.notebooks.com/2009/10/24/how-to-backup-your-installation-of-Windows-7/

  (references Windows 7, but the same principles apply to Windows 8).

• Is Photoshop CS5, which I am currently using with Windows 7 Pro 64 bit, also compatible with OS 64-bit Windows 10?

  Hello

  Currently, I use Photoshop CS5 with Windows 7 Pro 64-bit operating system.  I love the CS5 and need not upgrade to CC products.  I also think to buy a new PC with Windows 10 64-bit OS.  What is my Photoshop CS5 works with Windows 10?

  In addition, if CS5 is compatible with Win 10, must I first uninstall CS5 on my current computer before you install on the new machine, or can I just use my CS5 disk to install directly on the new PC with Win 10?

  Thank you

  Richard

  No need to uninstall CS 5 old machine. it is very very important to turn off activation in the menu helps to record the number of activations.

  All individual applications can be activated on 2 machines. Regarding the number of activations for more details, you can check with the help of Adobe once and get confirmation.

  Hmm, what about compatibility... cannot say it is completely compatible, but you can give a try. most of the cases, it works fine, but we cannot guarantee or say how it will work smoothly or can be installed on Windows 10 without any problem.

  If you face any problems with the installation disc, you can download at the bottom of the link:

  Download Adobe Creative Suite 5 products

  If you get an error, we are here to help you 24 * 7

• Application pools and CF9 64-bit and Windows 2008 R2 64-bit

  Hi all.

  Since about 3 months ago, I got CF9 64-bit running successfully on a Windows 2008 R2 64-bit, and 64-bit PHP server.

  It was a few days get it all working happily together, but it's an entirely different discussion, I'm happy to help if someone at - it need help.

  My question is for someone with some experience and understanding of the relationship between IIS 7, Cold Fusion and Application Pools.

  We have 8 GB of RAM on a 3.2 GHz dual processor box.  And on this particular server, we have about 350 sites of cold fusion.  All sites of very low traffic, I should add.  Like maybe on average 1000 page clicks each day.  In any case these sites ran flawlessly on 2 GB of RAM box with two 1 GHz processors.  And honestly, it ran more surely than it does now.

  What role the Application Pools in an environment dedicated to Cold Fusion?

  Because only one instance of JRun is already launched, SEE crashes when requests overwhelms the box and it blocks.  So, kind of defeated the purpose of the independent application in my opinion Pools.

  During my installation and transfer of these sites, I gave them each their own independent Application Pool, which are now individual instances of IIS worker process, each using about 10 MB of RAM.  Thus, for example, if the interaction that happens with 200 websites that they eat up to 2 GB of RAM, which, although not large, is very well now.  The problem is that I intend to leave this machine reach 500 sites before adding another box, but I worry about the performance.

  FUNDAMENTAL QUESTIONS:

  Should cold fusion Pools of independent applications for each web site or all websites can be used under DefaultAppPool?

  And what are the advantages and disadvantages of the two options?

  Is there a setting I should change who will say active stop w3wp.exe instances if no activity takes place for a certain period of time to release the memory.

  Thanks for any input.

  Rush, the bottom line questions:

  Should cold fusion Pools of independent for each web site applications or can

  all of these Web sites running under DefaultAppPool?

  No, it's not 'need '. They can all run in a pool. It is probably best to split them somehow, so that is something is not bad in a single application pool, at least those of the other application pool still works.

  And what are the advantages and disadvantages of the two options?

  As you note, each application pool uses a little memory. Not much, but as you note, 200 + it adds up. FWIW, the application pool is also part of the connection between IIS and CF, and there are times where just a recycling application pool (rather than restart CF) can solve a problem.

  That said, there certainly are times where CF will be what does not, and it won't matter to the application pools how you have. That's really what you want to focus on: why (if ever) SEE becomes is not responding.

  Is there a setting I should change who will say active

  instances of w3wp.exe to stop if no activity takes place for a certain

  time to release the memory.

  It is the default behavior of the application pools. See the "Advanced settings" for each pool in IIS 7 (or for her properties in IIS 6) for the recycling of various parameters of health protection.

  To return to your root cause problem (CF becomes unresponsive), anyway, you say "these sites were without fault on 2 GB of RAM box with two 1 GHz processors.  And honestly he ran more surely than it does now. "So what was 'before '? Not just less memory, I guess. He was also 32-bit instead? Was that an earlier version of the CF? It is useful for you to be more specific.

  Again, everything that is wrong is an explanation. It looks like you use the CF Server (not multiserver) mode, until you find in the coldfusion9\runtime\logs (not the coldfusion9\logs)? There may be important information before your plant that explains what is happening.

  As for your struggles get CF running on IIS 7, I'm curious: was it the 9.0? If Yes, what 9.0.1 (the free updater, which must be installed today on a download of CF9) which supported for IIS 7. Previously, it was indeed a little manual to make work work. And in fact, it may be that an update to version 9.0.1 could help resolve some problems if your manual configuration efforts could have hurt at all.

  Hope some of it is useful.

  /Charlie arehart

  [email protected]

  Quick delivery, help desk services remotely, the demand for CF (and CFBuilder)

  More on http://www.carehart.org/consulting

• How do I make a windows xp ultimate 64 bit Movie Maker video 1080 p 16:9 ratio format?

  How do I make a windows xp ultimate 64 bit Movie Maker video 1080 p 16:9 ratio format?

  Hello

  · What is the version of windows movie maker?

  In Windows Movie Maker, you can choose the format of the video and image format.

  a. determine how much to use for previewing video in Windows Movie Maker and for your final published movie.

  b. click on tools and then click Options.

  c. click on the Advanced tab and then click on 16:9 (widescreen).

• Visual studio 2005 application stopped working after windows 7 32 bit OS update to service pack 1

  Hi support them.

  I did tutor which is used to record the Windows Application to the learning process. It is a 32-bit application that works fine in Windows XP and Windows 7 32 bit OS operating system. But after the upgrade of Windows 7 Service Pack 1, it doesn't now. When we try to record something, it's giving the guardian has stopped working and program disappears.
  Any product from Guardian:
  1. it is a Visual Studio 2005 application.
  2. in execution of tutor, turn us the key to register PEHOOK.
  3. some of the DLLs we use are: Interop * and other user defined dlls.
  4. it can be used to record any application Windows 32 bit OS.
  When searching I got a solution in the forum:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/application-has-stopped-working-error-on-Windows7/82b6fbcd-ABA7-49e5-833d-51ce42e6ef42
  But after installing it too, the problem exists.
  Could you please help me solve this?
  Thank you very much in advance.
  Best regards
  Manu.

  Hello Manu,

  Thanks for the updates.

  Since then, enforcement, guardian, uses Visual Basic, please post this question in the Forums of Visual Studio for assistance.

  If you have any other questions about Windows operating systems, please get back to us.

• Driver that will make officejet 4255 ALL-IN-ONE, run fully functional with WINDOWS 7 ULTIMATE 32 bit

  1 HP Officejet 4255 all-in-ONE

  2. OPERATING SYSTEM-WINDOWS 7 (ULTIMATE0-32-BIT

  3. NO ANALYSIS NOT. FORMAT PDF, NO FUNCTIONAL DEVICE BUTTON. HP SOLUTIONS CENTRE LISTED DO NOT

  ((4 CHANGED OS SYSTEM WINDOWS VISTA964 BIT) TO WINDOWS 7 ULTIMATE932 BIT)

  5. DON'T SCAN FEATURE NOT IN. PDF FORMAT; DEVICE BUTTONS DONOT ALLOW ANY FUNCTION TAKES PLACE, HP SOLUTIONS CENTER DOES NOT APPEAR, SHOW INCOMPLETE INSTALLTION.

  Hello

  Unfortunately a complete software solution for feature for this product is more intended for Windows7, but only a feature of the basic software.

  As a complete software is not available, PDF scanning is not provided, as you can find below:

  http://support.HP.com/us-en/document/c01796879

  You can check any 3rd party software supporting the Officejet 4255 of scanning.

  VueScan as example offer scanning PDF features and supported this model of pritner

  http://www.Hamrick.com/VueScan/hp_officejet_4200.html

  Kind regards

  Shlomi

• How to make Windows 7 Home Premium 32-bit to 64-bit version

  I've recently upgraded to a card mother Intel D975XBX2 and 965EE Intel processor.  My OS is Windows 7 Home Premium, 32-bit version.   I bought almost 2 years ago and it came with versions 32 and 64 bit.   I understand the Intel D975XBX2 motherboard and 965EE processor will run 64-bit Windows & software.

  Is there an advantage to 64-bit and what precautions should I take to go from 32 bit to 64?

  Usually, the determining factor is the amount of RAM you have. A 32-bit Windows 7 can use 4 GB RAM max, normally a little less (3.2 to 3.6 GB). A 64-bit Windows 7 can use more than 4 GB of RAM, Home Basic upward to 8 GB, Home Premium to professional, full and business edition up to 192 GB and 16 GB.

  If you have Let's say 6 GB or more RAM you will benefit when replacing 32-bit with 64-bit Windows. If you decide to do, the only way is to do a clean, fresh installation; You cannot change the bit version once installed.

  Note that you may not even start the 64-bit installation of Windows to a 32-bit Windows desktop. You need to boot your PC with the installation media 64-bit, DVD or USB memory in order to install the 64-bit Windows 7.

• Make Windows 7 32-bit to 64-bit with OEM license

  I inherited Tower of Lenovo to my mother-in-law that she had installed under a license OEM Windows 7 Professional 32-bit.  I have the product key.  I'm changing from 32 bit to 64 bit, while keeping Windows 7 Professional.  I tried to use slui.exe 4, but after entering the code said it was invalid.  A run the validation tool, validated my license, run slui.exe 4 still not valid.  Some info told to contact Microsoft, other info says that I have to order manufacturer Lenovo recovery disk. I burned a WMI recovery disk.  Thanks much for the advice.

  Windows 7 Professional 64 bit is currently installed?

  If this is the case, use the product key on the COA sticker to reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us

  COA certificate of authenticity:

  http://www.Microsoft.com/howtotell/content.aspx?PG=COA

  What is the certificate of authenticity for Windows?

  http://Windows.Microsoft.com/en-us/Windows7/what-is-the-Windows-certificate-of-authenticity

• Audio problem in Windows 8 Pro 64 - bit...?

  ---

  Sometimes (about 50% of the time), sounds don't work at all, either when using headphones or built-in speakers...

  ---

  When this problem started:

  This problem started on July 10 after a few automatic updates have been installed. According to the history of my update, this is:

  (1) update for Windows 8 for x 64 systems (KB2960837)
  (2) removal tool malware from Windows to Windows 8, 8.1 and Windows Server 2012, 2012 x 64 edition R2 - July 2014 (KB890830)

  ---

  How to solve this problem:

  Right click on "computer".

  Go to 'manage '.

  Go to "Services".

  Right click on "Windows Audio" and "restart".

  Then I restart the laptop and the sound is working again...

  ---

  After the above, I did this:

  Went to "playback devices".

  Went to 'Properties' and then 'Advanced' tab

  Unchecked "allow applications to take exclusive control of this device."

  ---

  But still, half the time I start up my system, the problem is recurring and I have to redo the steps above to make it work again... When I go to "Playback devices" and right click on the speaker and select 'Test', I get the following warning message:

  "The device is used by another application.

  "Please close all units are audio playback on this device, and then try again.

  ---

  But according to the Task Manager, there is no other application running which I think could do this... I got a Virus/Malware and did a full system scan and analysis in time start but there is nothing... While I can solve this problem by following the steps above and by restarting Windows Audio, I want a permanent problem solution please... I don't want to have to keep rebooting my audio system to rework...

  ---

  Features of the laptop:

  i5 - 3210M

  6 GB DDR3 1600 MHz RAM

  Intel HD 4000 @ 650-1100 MHz

  Windows 8 Pro 64-bit

  Quick Heal antivirus Pro

  ---

  Update KB2962407 the origin of the problem. I fixed mine to uninstall this particular update. Details can be found here:

  http://www.eightforums.com/sound-audio/49684-no-sound-device-being-used-another-application-7.html

• I need a link for windows 7 starter 32 bit X 16-96078

  I need a link for windows 7 starter 32 bit X 16-96078. If possible!

  Hello

  HP do not offer a download for the recovery media option, but there are two options available.

  1. you can order a set of replacement of the recovery media using the link below - it will reinstall the operating system, all the drivers, and almost all of the original software (the exception being often tests of MS Office).  They will also recreate all of the original scores, including the recovery Partition.

  Order HP recovery disks.

  2 you can use the following method to create your own Windows 7 Starter 32-bit installation media.

  Before you try the following, make sure that you can still read all the key character product activation 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create Windows 7 installation yourself using another PC. However, it not there no download directly available for Windows 7 Starter, so you'll need to download another version (one will do, but the link below is for Windows 7 Home Premium 32 bit - the source of the image is Digital River).

  Windows 7 Home Premium 32 bit SP1.

  For the key on your label of COA to work, you must now use the method described in the following link to convert this ISO to an all-version Installer - the section that require you to edit the ISO is Step 1 DVD universal (although you will create an installer from usb, the method to change the ISO is the same).

  http://www.SevenForums.com/tutorials/85813-Windows-7-universal-installation-disc-create.html

  Once done, use an application like Rufus to create a bootable Windows 7 usb flash drive.

  Use the Flash drive to perform the installation, enter the activation key of Windows on the label of the COA in the request and one time Setup is complete, use the 'method of phone", described in detail in the link below to activate the operating system - this method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  You may need for your laptop, software and additional pilots are in entering either the complete model number or Nr here.

  Kind regards

  DP - K

• I want to learn more about Windows XP x 64 bit.

  Hello

  I would like to learn more about Windows XP x 64 bit.

  Issues related to the:

  1. Windows XP x 64 came to the House, or was it only pro.
  2. Where did you get XP x 64? Enter disc shaped?
  3. I've never seen an XP x 64 computer which offered PC manufacturers a PC with XP x 64 installed?
  4. How Service Pack of XP x 64 was there?

  I would appreciate knowing these things.

  Thank you.

  1. XP 64-bit only ever come to Pro edition.
  2. You can find online. It was a rare product in stores because of compatibility issues. Yes, it's a CD.
  3. None that I know. 64-bit was pushed more with Vista, because of 32-bit and 64-bit being equal.
  4. XP 64-bit went up to Service Pack 2, since it was a renamed Server 2003

  And with that last line, we see the major 64-bit XP had: it was a renamed Server 2003. He had a lot of application compatibility problems and was not really pushed with Vista around the corner. A big problem was the drivers because the drivers for most consumer devices written for XP waiting for XP 32-bit. They have not waited 64-bit Windows Server.

  Vista has brought Windows and Windows Server in the same code again and therefore, did not have the same kind of XP 64-bit compatibility issues did. Note that I'm not saying that Vista had no problems. We all know that was the case, and there are even 64-bit problems (a big consumer a noticed was that it took more than 5 general availability of Vista for Apple to make iTunes compatible with Vista 64-bit) similar to XP 64-bit. The difference this time is that Vista, 7, and 8 were pushing 64-bit on a par with 32-bit.

• Is it possible to downgrade Windows XP Professional 64 bit to 32 bit? How?

  Windows XP Professional 64-bit

  Is it possible to downgrade Windows XP Professional 64 bit to 32 bit? How? Please advice. Thank you!

  There is no downgrade option, you must perform a clean install of Windows XP 32-bit and reinstall your applications. Don't forget to back up your data files and check that you have the product keys and installation media for even before you start.

  How to do a clean install of Windows XP

  Start by changing the BIOS setting to start from the CD drive first.
  Then see below:

  Michael Steven: http://www.michaelstevenstech.com/cleanxpinstall.html
  more information: http://windowsxp.mvps.org/XPClean.htm
  and: http://www.theeldergeek.com/clean_installation_of_windows_xp.htm
  also: http://www.bootdisk.com/

  Also, make sure you have the drivers you need for your mother, video card
  card, sound card, etc.
  Try Belarc Advisor: http://www.belarc.com/free_download.html
  He did a good job of providing a wealth of information, including key software codes
  and you will need drivers for devices.

  J W Stuart: http://www.pagestart.com

• Cannot get Windows XP Home Edition for a mapped network drive / share on a computer of Windows 7 Pro 64-bit

  I constantly tried to use the "NET USE" syntax to get a Windows XP Home system to keep & share mapped network drive on a Windows 7 Pro 64-bit of the system and nothing I tried or worked on ANY blog. I can map the current network through made normal drive right click on 'My computer' and then provide a designation of drive letter with the correct path and have had great success using the function "connect using a different user name." However, even with the box checked to re-connect to the opening of the service is WORTHLESS! I made a lot of attempts to use the Net use syntax to create a batch file to overcome this non-functional raw application. I would really appreciate someone who actually had this issue resolved and work. I have looked at all the Windows files on the XP machine, searched the registry about a possible switch, which could make the necessary changes and have made all necessary changes on the Windows 7 system to accept the mapped network share. Help!

  Hello

  Since you have a network with different OS' I hope that Win 7 is configured to run on asnetwork work.

  If evry thing is configured properly it can be a problem of how your router keep information network. With the help of Staic DHCP or IP static on computers could help solve the problem.

  Just in case you need to reconfigure your network.

  ---------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall isactive .

  Since you have a network with Win 7 and the other version of Windows, you must configure Windows 7 as work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  * Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  -----------------------

  Jack MVP-networking. EZLAN.NET

• Can't download Windows 7 Pro 64 bit Disc Images (ISO files) with the license product key

  A few months ago, I bought a laptop with Windows 7 Pro 64 bit pre-installed, used with supplied installation disc. There is a hologram sticker COA affixed to the laptop with a product key. I used this key to activate the phone without problem. I was then able to install SP1 and various other updates over time.

  Recently, I decided that I should have a Windows installation disc (Windows Update has slowed to a crawl and doesn't, and I maybe to repair or reinstall it with the disk).

  I have entered my product key on Microsoft Web page to 'Download the Windows 7 disc Images (ISO files)'. But I got an error message:

  "The product key you have entered seems to be for software pre-installed by the manufacturer of the device. Contact the manufacturer of the software device for recovery options. »

  Running 'Winver' shows that my product is authorized.

  Running "slmgr.vbs - dli" shows the partial product key and license status "allowed."

  MGADiag.exe output is:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - T4RFK - DC6WJ-HJRQD
  Windows product key hash: p/QwvU1kRkh5Mvkrjx1O7/TkC5M =
  Windows product ID: 00371-OEM-9083357-81357
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {4C14EEF4-C713-4399-8265-5E06431E2549} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_ldr.151230 - 0600
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x86)\Opera\launcher.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {4C14EEF4-C713-4399-8265-5E06431E2549}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-HJRQD00371-OEM-9083357-813573S-1-5-21-3520213738-3859511033-2211005491LENOVO4236WQXLENOVO83ET67WW (1.37)20111128000000.000000 + 0002F983A07018400FE04090409Time(GMT-05:00) Standard is03LENOVOTP-83 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_NSLP
  Activation ID: e120e868-3df2-464a-95a0-b52fa5ada4bf
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00180-833-581357-02-1033-7601.0000-0222016
  Installation ID: 016701927914422105784524691096299435828995105123811821
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: HJRQD
  License status: licensed
  Remaining Windows rearm count: 2
  Time to trust: 11/05/2016-16:52:28

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 4:25:2016 15:40
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: MgAAAAIAAgABAAEAAAABAAAAAwABAAEAln3cbGKvI + Gilm7BhhAEAtaq3CMWeajwLnM =

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC LENOVO TP-83
  FACP LENOVO TP-83
  HPET LENOVO TP-83
  MCFG LENOVO TP-83
  SLIC LENOVO TP-83
  SSDT LENOVO TP-SSDT2
  SSDT LENOVO TP-SSDT2
  SSDT LENOVO TP-SSDT2
  CO-SUBMISSION LENOVO TP-83
  ASF!            LENOVO-TP-83
  TCPA PTL LENOVO
  SSDT LENOVO TP-SSDT2
  SSDT LENOVO TP-SSDT2
  UEFI LENOVO TP-83
  UEFI LENOVO TP-83
  UEFI LENOVO TP-83

  If I contact the seller, what what can they give me other than the product key valid I already activated?

  How can I download an installation image for the s/w Windows 7 that I activated?

  Thanks for your help.

  For 5 years, Microsoft made it fairly easy for users of the Windows 7 operating system to get reinstall media. If you have lost your support disc or installation retail collection; either it has been damaged or defective; You can download a copy of the edition that you have licensed from a membership site called Digital River. More recently, Microsoft ended the availability to reinstall media that you can download as a. File ISO in Digital River, which is a digital reproduction of an optical disc.

  It was particularly convenient for people who could not easily get the manufacturer's recovery media, did not want to pay the fees required to get or preferred a clean configuration without the software packaged manufacturers or even a recovery partition does not work. It's easy to use, all you had to do was reinstall and reactivate using the product key located on the certificate of authenticity and download all the drivers on the manufacturers website.

  Given that this option is no longer available, what are your options? See the article for more details:

  How to: What are my options for Windows 7 reinstall media?

  Make sure you scroll down and read the section:

  What to do if you cannot get your manufacturer recovery media, refuse to use or to buy it or the Microsoft Software Recovery Website does not work?