Malicious software has been installed on my system and now I start to a corrupt registry error

Similar Questions

• According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the section 'printers and faxes '.

  You have a printer again, with installation CD. According to the set printer wizard, my new printer software has been installed, but the printer will not appear on the "printers and faxes" section in Control Panel. Model of printer - Epson XP-200.  Have a Dell, Windows XP.  Help!  Not even sure who to ask...

  What version of XP (Home, Pro, Media Center) and service pack (none, 1, 2, 3)?

  Printers and faxes is totally blank?

  Open a command prompt window (start > run > cmd > OK)
  Type the following in the black command prompt window and press enter
  spooler request SC

  You should see something like this:
  Service_Name: Spooler
  TYPE: 110 WIN32_OWN_PROCESS (interactive)
  STATE: 4 RUNNING
  (STOPPABLE, NOT_PAUSABLE, IGNORES_SHUTDOWN
  WIN32_EXIT_CODE: 0 (0X0)
  SERVICE_EXIT_CODE: 0 (0X0)
  CHECKPOINT: 0X0
  WAIT_HINT: 0X0

  What is the 'State' displayed for you?

  Open the Services applet (start > run > services.msc > OK) and scroll down to "print spooler".  The status should be started and the Startup Type should be automatic.  What are the parameters of your correspondents?  If your print spooler is stopped, you can try to launch it by clicking on the link, but I suspect that it stops again.  Please report the results of your efforts.

• I would like to know where to find a friend app has been installed on my phone and who else is listed on it? I would love the history of this app on my phone for today's date, please.

  I would like to know where to find a friend app has been installed on my phone and who else is listed on it? I would love the history of this app on my phone for today's date, please. I changed my phone a couple of times, because the application was initially installed, but I can't work when it has been installed or that has first been listed on it... where I'd get that information from? I do my back ups on my laptop that uses OS X El Capitan Version 10.11.4 on iTunes. Thank you.

  Locate the app in iTunes > window Apps, select it, and press Cmd + I to get info. The file tab should show which account it was acquired on and when. Another I don't think that there is no history, that you can get. All you can see is a current list of those you follow and you allowed to follow you.

  TT2

• My card has been replaced on my Mac and now my CS4 won't open. I have re-uploaded, gave the serial number, but it will not always be open.  Now what?

  My card has been replaced on my Mac and now my CS4 won't open. I have re-uploaded, gave the serial number, but it will not always be open.  He said that the license has expired.  But this isn't the case.  Now what?

  uninstall, clean (use the CC cleaning tool to solve installation problems |) CC, CS3 - CS6) and then install correctly (do not migrate, use timemachine etc.) using the installation files.

  Available downloadable Setup files:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
  • Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
  • Lightroom: 5.7.1. 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Thanks @ Eric I downloaded the combo of the control software has been installed, but couldn't the 10.10.5 Yosemite

  Thanks @ Eric, I already downloaded the combo, but one of the other update has been installed but the Yosemite 10.10.5 have not installed.

  Your original thread is x yasomite 10.10.5 operating system update will not install

• has deleted part of the key of windows vista which has been integrated with the laptop and when I start the laptop it asks activation, what to do, please give solutions

  the sticker on my laptop has disappeared/deleted and I am not able to see the full key for windows vista operating system has been pre-installed on the laptop and now she asks activation and I did not quite correct key because he got faded/deleted, how can I get the key to work on the laptop I have compaq-presario-cq60-420 US laptop.please help me or give me the microsoft contact numbers where I can get my key of windows vista back by providing the serial number and the product number for my laptop.  I am unable to work as the laptop does not work without the activation key.

  Hello

  You can use a magnifying glass and a flashlight to see if you can read the numbers of the product key on the label.

  Or take a picture of it and expand it on the screen.

  ______________________________________________________________

  Also that, read also:

  You can contact your computer manufacturer and ask them to send you a set of recovery disks and to reinstall the operating system.

  They should do this for a fee, if they still have available to them.

  _____________________________________________________________

  And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

  The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

  Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

  Ask them to the proper key sequence.

  ____________________________________________________________

  And if you do not score a manufacturer of recovery on your hard drive, you should be able to make your own recovery from her disks to reinstall the operating system.

  Go to programs > name of the manufacturer of your computer > then their system or recovery tools software topics for them, depending on how it is formulated.

  If you can't find any reference to it, contact the manufacturer for advice on how to make these recovery disks.

  The methods above resettlement generally do not require allows you to provide a product key during Installation, the recovery process uses the Installation product key factory to activate automatically during the resettlement process.

  See you soon.

• Error: Device driver software has been installed correctly

  I built a new desktop computer and installed Vista x 32 last summer.  I had no problems until recently, when I tried to plug in a flash drive a friend and Vista has problems to install the driver.  I received the message:

  Windows encountered a problem installing the software driver for your device
  Windows found driver software for your device but encountered an error trying to install it.
  USB mass storage device
  Not enough memory is available to process this command.

  I ended up plugging the flash drive on my laptop and transfer the files to my desktop on my home network.  The second problem occurred a few weeks later, when the internal memory card reader that I had installed has stopped working.  I thought it was a driver problem, so I uninstalled the device by using Device Manager and restarted my computer, thinking that the plug-and-play device should be automatically reinstalled.  Upon reboot, Vista tried to reinstall the device and ends with a similar message to what I had received for the flash player.

  I was determined to get my pictures on my computer so I plugged into an external USB card reader.  I received the same message when trying to install it.  Finally, I tried to plug directly into my Canon SD880IS, but again received the message.

  Does anyone know why Vista does not recognize one of these USB devices?  I tried a variety of USB ports on my computer without success and everything that I had already installed works always.  I'm not sure what the message is referring when he said "not enough memory is available to process this command."  I have 151 GB free on my disk system and 4 GB of memory installed.

  Thanks in advance!

  spritemv, do a SFC scan for me, let's see what are the results:

  The System File Checker tool:

  To determine if the problem you are experiencing is caused by one or more system files that are used by Windows Vista, run the System File Checker tool. The System File Checker tool analyzes the system files and replaces incorrect versions of system files by using the correct versions.

  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the box start the search.
  2. Right click on cmd in the list programs, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue
  3. At the command prompt, type the following command and press ENTER: sfc/scannow
  4. When the analysis is complete, test to see if the problem you are experiencing is resolved.

  Although your question could not be linked with protected system files, I check if you have any other corruptions on your system.
  It maybe your Windows Installation has picked up corruption over time by the program facilities.

  To continue:
  What happens when you start with a card inserted into your card reader, memory does make a difference of recognition?
  If it is a device that you have personally installed, you can check the OEM for any possible driver update, we can use?

  Check the status of the device and the driver Version:

  1. Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. Double-click the category containing your device driver, and then double-click the device name.
  3. Check the status of the device under the driver tab click on general tab, check driver provide Date of the driver, the driver Version, digital signer. Please provide this information.
  4. Click OK, exit Device Manager.

  See if you can completely uninstall and reinstall your card reader who follows the steps, please check the categories for the time installed thumbdrive you mentioned to see if we can remove that as well:

  Uninstall the drivers of hidden devices:

  1. Click Start-> click all programs-> on Accessories-> right click on command prompt, select run as administrator. If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  2. At the command prompt, type the following commands (press ENTER after each):
  3. SET DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  4. devmgmt.msc
  5. When in Device Manager, click view and then show hidden devices
  6. Expand the category that contains your device, and then double-click the name of your device.
  7. Click the driver tab and then click on uninstall.
  8. If there is remove the software this box of the device driver, check (make sure that you have an internet connection so that you can buy these drivers). Read and confirm notification, click OK.
  9. Quit Device Manager and restart your computer.
  10. You will be asked at new hardware detected. Select search and install the driver software. Check permissions. Windows will now search for the driver for your hardware and reinstall.
  11. Retest the device

  In regards to your iTunes message, see if the disassembly of the upper and lower filters apply to your situation:

  Delete upper and lower filters

  Click Start-> click on all programs-> on accessories-> click notebook.

  Copy the following commands, and then paste them into the opened Notepad window:

  Reg export HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}-%userprofile%\desktop\FiltersBackup.reg
  reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------UpperFilters f v
  reg delete HKLM\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}------LowerFilters f v

  On the file menu, click Save as, and then type DeleteFilters.cmd

  Click on save as type and select all files (*. *).

  Save the DeleteFilters.cmd file to your desktop.

  Right-click the DeleteFilters.cmd file, and then click Run as administrator. If you are prompted for an administrator password or for confirmation, type the password, or click on continue.

  Try to install updates again.

  Notes

  After running this script, all custom CD/DVD filter drivers installed programs maybe isn't able to use your CD/DVD until your reinstall these programs. If the script command solves the problem, you can restore your custom CD/DVD filter driver by double-clicking on the FiltersBackup.reg that the command script exports to your desktop. If the problem is resolved, delete the DeleteFilters.cmd file that you created.

  Rami
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Received the error that my operating system has been installed too many times and does not allow installation.

  installs Windows is no longer permitted

  Hi, my sons computer crashed several times due to hardware problems. It resulted in windows being installed several times. He just had a disk crash and after installing a new disk, windows indicate that the key has been used repeatedly, not allowing an installation again. How can I fix it?

  Use the Activate by phone and speak to a live operator.

  Activate by phone

  Click the Start button
  in the search box, type
  SLUI 4
  and press the Enter key
  Follow the instructions - but when asked which service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you.

• I contacted support and asked to remove all of the activations for my product. Software has been installed on a computer on which I can't use anymore. The computer is still in use, but I never have it disabled or uninstalled.

  Basically, how long this person will be able to use my software until updates of activation?

  This isn't how it works.  Even if the support reset your number of activations, products which have been activated previously will remain active.  (Unless it's a CC product, which requires regular reactivation.)

• help in the detection of virus - Message at the bottom of my screen says that any page that I opened contains malware and malicious software has been removed

  I am trying to open the pages of reliable Web sites and I get a meesage low thr of my screen that says they contained a virus and was deleted?  they won't let me download pages or files...   This includes pa dept of State site, which is no doubt worthy of trust

  Hello

  Is there a shield icon in the taskbar area? A windows comes up with the name of the virus? Sounds like the virus of safety, such as the 2012 security shield or something like that. If yes then go to bleeping computer and they have a guide to remove this virus. The guide works really well.
  http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2012
  If it is not that you will need to remove look on the right sidebar and there will be links to others, the process is the same for all.

• When I updated to Firefox 5 has been disabled my realplayer downloader and now I don't know how to download mp3 files.

  the downloader realplayer download mp3 and then diverted to copy on the ipod. When Firefox updated for Firefox 5, a pop up says that the module of realplayer was inconsistent... so now when my mp3 play I do not know how to get to itunes so I can get it to the ipod.

  Because of security vulnerabilities, roll back to Firefox 4.0.1 is discouraged.

  Here is the process to roll back to 3.6:

  First of all, I recommend you backup your Firefox settings in case something goes wrong. See your backup information. (You can copy your profile folder Firefox together somewhere outside the Mozilla folder).

  Then, download and save Firefox 3.6 on your desktop for later installation. http://www.Mozilla.com/Firefox/all-older

  Firefox is closed 5.

  You could install Firefox 3.6 on it (many have reported success) or you can uninstall Firefox first. If you uninstall, do not remove your personal data and settings, the entire program.

  Unless you have installed an incompatible add-on, Firefox 3.6 should pick up where you left. If there are serious questions, please post back with details.

  Note: I have not actually tried myself!

• Synchronization 7.3.2.26 FF extension has been added to my computer and now I can't connect to the Gmail account

  I have it turned off and I can connect OK. I don't know what else this Extension is not sure if I should be deactivated permanently. How can I contact the people who made it?

  Tools > Addons > Extensions

  Find this extension in this list and then click on it to make it appear highlighted. Then right-click on it and choose on this extension , or visit the home page - I hope that who created this extension took advantage of one of these features.

• How do I configure Openfiler for ESXi 5.0 (on which has been installed in the workstation).

  9.0 pre-installed VMware I installed in my laptop. I created a 5.0 as a VM ESXi in workstation. And I installed vSphere client 5.0 in my laptop. And I am able to access ESXi from my laptop through the vSphere client.

  Now, I created a VM with Windows 2008 R2 on top of ESXi. I installed vCenter 5.0 in Windows 2008 R2 Machine. I have just to connect to vCenter using vSphere client (which has been installed in my laptop) and added ESXi as host in the inventory.

  Now, I created a VM with Openfiler. Everything is fine. I want to use this Openfiler as a storage array, and I want the SAN with ESXi and Openfiler configuration.

  I think I need to create a VMkernel port group and attach that Openfiler VM who. And if I want to access the Openfiler web interface, do I need to have internet access? We can access the Openfiler Web interface without having access to the internet?

  Can someone let me know how to connect this Openfiler as a storage Bay for ESXi and configure a San.

  Openfiler does not need Internet access and you do not require an additional VMkernel port for access.  If it's production, you share the management and traffic on NIC iSCSI physical separate and thus vmkernel ports.  In this case, it is not necessary.  Did you do the initial installation of Openfiler to create a LUN for the ESXi host access?

• DeskJet 1510 all-in-One: the installation of the software has failed after the USB connection and remain unfinihed. Work for printer and Scanner

  My PC Dell XPS401L has been updated to Win 7 Win 10.  Then, the HP DJ1510_188 software has been installed.

  The task was ok until the bond required of the Dekjet to the USB port.

  Heard the noise of the acknowledgement of receipt, but there screen remains unchanged despite I wait several minutes. So the installation remains unfinished. However, the printer and scanner are both of the device but are not available important "Solution Center" screen.  I already have the solutions of the error indicated by HP support withot success.

  The system indicates that the problems appear in the USBsetup.exe

  Can someone help on this subject?

  Horacio

  Hi @Horacio_B,

  Thanks for joining the Forums of HP Support for a solution to your installation problem.

  I understand that you try to use an all-in-one printer HP Deskjet 1510 with a PC that has been upgraded from Windows 7 to Windows 10 but does not complete the installation of the USB and the HP Solution Center is not available. I would like to help.

  I would like to start by disconnecting the USB cable and uninstall all software related to printers. Here is a support document which can be used if necessary reference - uninstalling the software of the printer (Windows).

  Once it's over try to use the HP printer installation wizard for installation. This tool will get the software and installation help.

  Please let me know if that solves the problem, or if you need assistance.

  Indeed, if this help you to achieve a solution please click the 'accept as Solution' and the 'thumbs up' buttons down below in this message.

  Thank you!

• Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not. Please help.

  Several times after that I opened Google it does not connect to the internet. Has worked for a long time, and now it will not. Sometimes it opens if you "Refresh" sometimes not.  Help, please. It has been stable over the years and now it will not work. I get no help when I diagnoise of problems, but I never. It has been checked and rechecked. PitStop does not even recognize a problem. I could change the homepage, but I prefer to use Google if it works. Frustrating.

  You may need to update your toolbar, google has made some changes just about everything and possibly that the page is not where it used to be.