Manage cluster 5.0 with 5.5 client vSphere?

Similar Questions

• recovery of a managed cluster objective reference with Indexderecherche

  According to the programming guide (page 61), you can get the moRef for ClusterComputeResource with Indexderecherche. I don't see how. I tried to use the method of findChild() against the folder that contains the cluster, but that did not work.

  I'm recovering the performance statistics on the cluster. Is there a better way to do it?

  Thank you

  Daniel

  You can use the FindByInventoryPath (String inventoryPath);

  EX: FindByInventoryPath(/DatacenterName/host/FolderName/ClusterName).

  You can also check the com.vmware.samples.general.SearchIndex.java

• Very slow performance with the Web Client vSphere

  I'm testing the vSphere Web Client, but I find it excruciatingly slow - it takes almost 5 minutes just to open a session, and each click after that I take a good load of 30 seconds before the new page is completed. I think I spent a good 10 minutes to total just go to the screen where I could power on a virtual machine, which is something that can been done in less than a minute using the traditional desktop client.

  Horribly misconfigured web client somehow?

  The following changes improved the performance of the web client of my client. So far, no more hung tasks, navigation in the console of the web client has been improved. We are always monitoring well.

  Has increased the heap size JVM of vSphere Web Client to 3 GB. Used the following KB KB VMware: settings of the configuration in VMware vCenter Server 5.1 and 5.5 Tomcat server

• Password Manager is not initialized with IE 7.0

  Hello

  I have a Lenovo T61 running on XP SP2 and Client Security Solution version 8.21.0006

  Password Manager worked very well with IE 7.0 until I install a dictionary on line and started to initialize when web sites visited, where the password manager should appear and enter the password.

  I tried to/impossible to activate the option: tab, internet options, under the heading advanced navigation "enable third party browser extensions", but still I can't get this to work.

  I tested with other applications apart from IE 7 and password manager is displayed correctly.

  Do you have any suggestions on how to proceed in order to make the PM to work under IE 7?

  Thank you.

  Hello

  the solution was to repair the installation of software in Add or remove programs. (Also make sure that in internet options to turn them on third party extensions browser is marked.

  After the computer restarts, it works perfectly.

  Hope this can help anyonme with the same problems.

  Kind regards.

• VCS - C cluster and Cluster VCS-E with Movi 4.6 register and call interruption

  Hi all

  We have VCS - C cluster and Cluster VCS-E with Movi 4.6 register and call interruptions. The point is, if the appeal or record comes from the Internet. We have the sip proxy model vcse--> vcs - c record. The strange point is, if run us in mode not cluster with only 1 vcs - c, then the call works very well or so over 1 minute. We also have findme. The call internal registered locally (VCSC) works as well) the case appears if the active VCS - c cluster and the movi has been listed in the subzone of the crossing of VCS - c
  VCS versions are x.7.2.2 and tms 14.2.2
  Thx for your comments

  Sent by Cisco Support technique iPhone App

  Hi friend

  The issue you are experiencing is a known limit of Jabber of telepresence. This happens when registration of the device is transmitted by proxy to the VCS control, where VCS are clusters. Probably what is happening:

  -Jabber client records through the fast track to a control in the area of the highway crossing.

  -L' check requires authentication

  -When the customer registers again every minute (registration of SIP (re) process normal), the registration request is sent to one of the other controls in the cluster.

  -The customer then completes the current record and authenticates back to the other control

  -The client (Jabber) will tear down the ongoing call when there is re - authenticate registration

  This problem is resolved in the current version for Jabber for iPad. The current version of Jabber for TelePresence still has this problem. Default: CSCud17952

  Another user has reported the same issue. See the following:

  https://supportforums.Cisco.com/message/3967325#3967325

  Zachary Colton gave the answer. I simply copied his explanation and pasted here.

  Paulo Souza

  Please note the answers and mark it as "answered" as appropriate.

• Move cluster configured with replication SRM and Vsphere

  All,

  We go 2 groups in the near future to achieve a geographical distance between the 2 sites.

  A cluster is equipped with VMware 5.0 replication SRM and vSphere and the other cluster running VMware 5.5 and SRM in combination with replication of vSphere.

  What is the best way to move these clusters, I must stop the replication or interrupt the replication process and are these action to perform on SRM or we need to perform any action on the virtual machine itself?

  I read that a stop is setting the State to not configured including destroy all files in the target directory.

  Does anyone have an experience by physically moving a cluster managed by SRM (and replication of vSphere)

  Any help is welcome

  Thank you

  Gerbert Coolen

  Just pause replication before stop you the VR device on the site target/DR. stop vs break with vSphere replication - VMware vSphere Blog - Articles from VMware

• Cannot Connect to Host ESXi 4.1 with browser or Client VI

  Hi, I have a strange problem which has persisted since I first installed ESXi 4.1 on a server. First my setup:

  • ESXi Installable on a HP DL380 G6 server, 32 GB of RAM, 4xEmbedded NETWORK ports, Port NIC, 2 iSCSI x QLogic QLE4060C HBAs 1xDual adapter

  • HBAs configured for Jumbo and static IP frames but except that all the settings are default

  We have installed ESXi 4.1 with only the built-in port #1 connected to the switch. Everything went well and we were allocated the only active NIC (vmnic0) as the management interface. Once installation is complete, we were able to connect to the management interface using a browser and the VI client.

  We then connected NETWORK card and remaining HBA ports to the switch without loss of connectivity to the management interface. During our next restart we could no longer connect directly to the host using a browser or the VI client but could still ping the IP.

  We tried to restart the management agents, but it did not help.

  Here are the different startup scenarios, we tested and the results:

  Scenario #1 - Boot with built-in NICs, DP adapter cards, network and HBAs connected to the switch.

  • Can we ping the IP of host of Mgmt? = Yes

  Can • we consult to the IP host of Mgmt or connect using the VI Client? = NO

  Even if we try to unplug the adapter DP and HBA ports after starting we still cannot connect to the management using the Explorer or the VI Client interface. A reboot is required, and the script #2 or #3 must be followed.

  Scenario #2 - start with only the embedded and DP adapter NIC connected to the switch.

  • Can we ping the IP of host of Mgmt? = Yes

  Can • we consult to the IP host of Mgmt or connect using the VI Client? = NO

  If disconnect us the two ports of adapter DP we can then connect to the host via the browser or the VI client without having to restart. We can reconnect them and we continue to have access to the host, and everything is fine.

  Scenario n ° 3 -Boot with only the NIC integrated, including the Mgmt NIC connected to the switch.

  • Can we ping the IP of host of Mgmt? = Yes

  Can • we consult to the IP host of Mgmt or connect using the VI Client? = Yes

  Then we connected the DP adapter and the adapter port HBAS to the switch and all the connectivity was very good. This scenario is our solution for now.

  Other information

  The QLE6xxx ESXi module takes about 5 minutes to load during startup, when the HBAs are connected to the switch, but it loads successfully. Not sure if this is normal or not.

  Thank you in advance for your help!

  Paul

  This looks like a very unusual network for me configuration.

  Could you post a screenshot of virtual network configuration and add a few comments on the different configuration of the vSwitches and uplink connected.

  If I understand correctly that you have at least 3 vSwitches (management, virtual machines, and iSCSI), however, from what you wrote so far I do not completely understand how implement you.

  André

• SQLite Manager does not work with the v11. Until make you it easier to go back to older versions or newer versions stop, breaking most of the modules I won't use Firefox

  SQLite Manager does not work with the v11. Until that make it easier to return to older versions or newer versions stop, breaking most of the modules I use FirefoxHow to come back at 10 Firefox?

  Update Firefox 23.0 which published yesterday afternoon.

  • https://www.Mozilla.org/en-us/Firefox/all/

• Portege R500 - TrueSuite Access manager does not work with IE 8

  TrueSuite Access Manager does not work with Internet Explorer 8

  Version:
  Internet Explorer: 8.0.6001.18702
  TrueSuite Access Manager 2.1.23.0

  Any idea?

  Thankx
  Robert

  Hello!

  Which laptop computer and operating system you have?
  And what do you mean with it doesn t work? You get an error message or something else?

  You must give us a little more information. Otherwise, we can t help you my friend.

  Good bye

• looking at my pictures in windows live, they have a yellow tent their when I switch to Office Picture Manager pictures is clean with the right colors

  looking at my pictures in windows live, they have a yellow tent their when I switch to Office Picture Manager pictures is clean with the right colors

  Hello

  Thanks for posting this question in the Microsoft Community Forums.

  I see that there is a yellow tint to the photo in Windows Live Mail.

  Let us work together to solve this problem.

  However, we need more information. Please answer these questions so that we can better understand the issue.

  1. this happens with a particular photo?

  2 what is the size of the photo?

  Please send us the screenshot of the photo with the yellow tint.

  Follow the link below to find out how to upload files to SkyDrive.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  I ask you to do the following troubleshooter.

  Fixed problems with Windows Live Photo Gallery that does not
  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/

  Please get back to us with the results.

  If you continue to deal with this problem, please contact Windows Live at the following link:

  http://answers.Microsoft.com/en-us/windowslive/Forum?tab=all

  If you have questions about Windows operating systems, please contact us on this forum. We are happy to help you.

• How to get Windows Live Mail 2011 to remove emails from my hotmail server account once they have been synchronized with the WML client. ?

  How to fix WLM 2011 to remove emails from my hotmail server account once they have been synchronized with the WML client. ? I've seen several references in forums to an option that is located on the Advanced tab in the menu Options/Email accounts/properties, but I don't have an option in the Advanced tab in this menu. Is there another way to do it. ? I tried to do this manually, but when I manually delete a message in my Hotmail account it also deletes the message on the client when it synchronizes. I would like to have my messages stored on my customer only and not on the server. Is there a way to do this. ?

  View all Windows Live and Hotmail questions in the appropriate forum found here:
  http://windowslivehelp.com/

• AnyConnect + possible PSK (pre-shared key) as under with cisco vpn client ikev1 and ikev2

  Is it possible to create a VPN Anyconnect of RA with just the name of user and password + pre-shared key (Group) for the connection, as could do for ikev1 with cisco VPN client? I am running 8.4.X ASA code and looks like tunnel-group commands have 8.2.X somewhat change. If you change the group type of the tunnel for remote access, now there is no option for IKEv2 PSK. This is only available when you choose the type

  Type of TG_TEST FW1 (config) # tunnel - group?

  set up the mode commands/options:
  Site IPSec IPSec-l2l group
  Remote access using IPSec-IPSec-ra (DEPRECATED) group
  remote access remote access (IPSec and WebVPN) group
  WebVPN WebVPN Group (DEPRECATED)

  FW1(config-tunnel-General) # tunnel - group TG_TEST ipsec-attributes
  FW1(config-tunnel-IPSec) #?

  configuration of the tunnel-group commands:
  any required authorization request users to allow successfully in order to
  Connect (DEPRECATED)
  Allow chain issuing of the certificate
  output attribute tunnel-group IPSec configuration
  mode
  help help for group orders of tunnel configuration
  IKEv1 configure IKEv1
  ISAKMP policy configure ISAKMP
  not to remove a pair of attribute value
  by the peer-id-validate Validate identity of the peer using the peer
  certificate
  negotiation to Enable password update in RADIUS RADIUS with expiry
  authentication (DEPRECATED)

  FW1(config-tunnel-IPSec) # ikev1?

  the tunnel-group-ipsec mode commands/options:
  pre-shared key associate a key shared in advance with the connection policy

  I'm getting old so I hope that it is not in another complaint curmudgeonly on the loss of functionality. :)

  Many small businesses do not want to invest in the PKI. It is usually a pain to deploy, backup, make redundant, etc..

  But it would be nice to have a bit more security on VPN other than just the connections of username and password.

  If this is not possible, it is possible to configure the Anyconnect customer to IKEv1 with PSK and name at the level of the Group client?

  If this is not possible, WTH did cisco end customer VPN cisco as a choice of VPN connection (other than to get more fresh mail of license)?

  I really hope that something like this exists still!

  THX,

  WR

  You are welcome

  In addition to two factors, you can also do double authentication (ie the two using the user name and password). Each set of credentials can come from a Bank of different identities.

  With this scheme, you can can configure a local user name (common) with password on the SAA (think of it as your analog PSK) and the other be the AD user identification information.

• Synch Blackberry Q10 Q 10 blackBerry with Outlook PC Client

  Well... After seeing the horror stories on the do not synchronize with the OUtlook Client PC, I was pleasantly surprised to see my calanedar Outlook appear on my Q10 and low and behold, my contacts also appear (or so I thought). I used Blackberry link v 1.1.26 (although the website appelle.32.

  However, since the load initial, despite setting "2 way synch."

  (1) new contacts in the bb10 arrive in outlook but new contacts in outlook do not reach BB10.

  (2) new calendar appt is Q10, outlook cannot synchronize now

  and mourning of first my more than 7000 contacts do not appear when I search for them (including my own contact info!), however, if sometimes I type in my cell phone number in the phone call section, low and here he finds me and shows my full information. but try to look for me or my mother? cannot find me.

  I'm a Blackberry user faithfuull since 1998 and only lost recently for 3 months with a Samsung S3. (Hated)   Please forgive me and help me out.

  Anyone got any suggestions?

  Thank you. You were right. Despite everywhere where I keep my contacts or calendar in MS outlook, I had to show the sour «Link BlackBerry» Now, all of the initial charge is displayed.

  But, of course, there is no synchronization of 2 channels for updates via the Usb cable or wireless. The LINK of BlackBerry ap recognizes the Q10, connected wireless, seems busy, buit not update contacts or calendar. Someone knows what he's doing? And someone at - it a better explanation of BlackBerry themselves?

• Can I manage a Mysql database with dreamweaver CC? Comment if so?

  Can I manage a Mysql database with dreamweaver CC? Comment if so?

  For example, I prepare a registration page and then I can't find how to connect MySQL database in dreamweaver CC pour it works.

  How does it do?

  1. download a new extension manager for CC.  Here is a list of 3, all free.

  Anastasiy extensions Manager

  http://install.anastasiy.com/

  The seven extensions of the project manager

  http://www.Projectseven.com/extensions/

  The DMX Zone extensions Manager

  http://www.DMXzone.com/go/22670/DMXzone-extension-manager-for-Dreamweaver

  ============================

  2. download the Extension of obsolete DMX Zone Server Behaviors panel

  http://www.DMXzone.com/go/21842/enable-server-behaviors-and-data-bindings-panel-support-fo r-dreamweaver-cc.

  ============================

  3. replace the obsolete server with a modern commercial extension behaviors:

  http://www.WebAssist.com/Dreamweaver-extensions/mysqli

  Nancy O.

• VWC plugin using sdk 5.1 is broken if running on the web client 6.0 with port 9443 - out could not connect to the Web Client vSphere. Contact your administrator to resolve this problem.

  We did a vwc with sdk 5.1 plugin, now, we want to make it work on the web client 6.0. before the race, we have changed the MANIFESTO. MF and services-config. XML responses such as the following:

  2 important reminders for your plugin 5.5 is compatible with the Web Client 6.0

  After that, we deployed our plugin on web client 6.0

  If access us using the URL with port: https:// < ipaddress >: client/vsphere-9443 /? csp, our plugin arises, our plugin function is also ok.

  If access us using the URL without port: https://< ipaddress > / vsphere client /? csp, our plugin is present, the function is broken (error occurred when flex user interface by calling the java service: "Could not connect to vSphere Web Client.) Contact your administrator to resolve this problem. »).

  Thank you very much

  Please change the CHANNEL_URL in your proxy classes to use 'amf' instead of 'amfsecure '.

  private static const CHANNEL_URI:String = "/" + YOUR_MODULE.contextPath + "/messagebroker/amf"
  

  This should solve your problem.