manage the blocking angles

Similar Questions

• Continue the block after the exception management

  The guys in the slot block.

  create or replace procedure proc_case
  (p_in IN number)
  is
  begin
  case p_in
  when 1 then
  dbms_output.put_line('its one'); 
  when 2 then
  dbms_output.put_line('its two'); 
  end case;
  dbms_output.put_line('after the exception handler'); 
  exception when case_not_found then
  dbms_output.put_line('its not found'); 
  end;
  

  When the procedure is executed as follows.

  begin
  proc_case(3);
  end;
  

  It shows the statement in the block of exception, but after that it does not run the statement following the exception handler and the outputs of the block, how can I execute the statement after the end case statement. I do not use the Else statement in case because I wanted to understand the logic of this block.

  CREATE OR REPLACE

  PROCEDURE proc_case

  (

  p_in in NUMBER)

  IS

  BEGIN

  BEGIN

  P_in CASE

  WHEN 1 THEN

  dbms_output.put_line ('the one');

  WHEN 2 THEN

  dbms_output.put_line ('two');

  END CASE;

  EXCEPTION

  WHEN case_not_found THEN

  dbms_output.put_line ("' its not found");

  END;

  dbms_output.put_line ("' after the exception handler");

  END;

• How to deploy the blocker allowed parameters of sites on multiple computers?

  We run on Win 7 platform with ESR Firefox version 31.4.0. We want to disable the blocker for popups for specific sites. I tried to use FirefoxADM_0.5.9.4 to apply the Group Policy settings, but it does not work. When I look at the file firefox_login.vbs, there is a line mentioning registry parameter FirefoxPopupsWhitelistKey = WshShell.regread("HKCU\Software\Policies\Firefox\FirefoxPopupWhitelist") but I can not find this key on the computer.

  Is that what anyone has experience deploy this type of settings? If this isn't the case, I'm also open to hearing about how to disable the blocker for popups completely.

  If this can be done via Group Policy, please let me know another way I can do this. I read the topic: configuration config, but I found all the settings to disable the context menu.

  Thanks for your help.

  Firefox saves all exceptions to the permissions.sqlite file, so you need to use a SQLite Manager extension or program to modify this database.

  Disable the popup blocker in Firefox would be easier, as it would need only to switch a pref and can be done via a mozilla.cfg file.

  You can use a mozilla.cfg file in the Firefox program folder to lock the prefs or specify new values (default).

  Put a local file - settings.js in the folder defaults\pref also the file prefs.js - channel where to specify using mozilla.cfg.

  pref("general.config.filename", "mozilla.cfg");
  pref("general.config.obscure_value", 0);
  

  These functions can be used in the mozilla.cfg file:

  defaultPref();	// set new default value
  pref();		// set pref, allow changes in current session
  lockPref();	// lock pref, disallow changes
  

  See also:

  • http://KB.mozillazine.org/Locking_preferences
  • http://Mike.kaply.com/2012/03/16/customizing-Firefox-AutoConfig-files/
  • http://Mike.kaply.com/2014/01/08/can-Firefox-do-this/

• Firefox refuses to stop the blocking of pop-up windows - up, even with added exceptions and blocker completely disabled.

  I work in a facility that uses a corporate intranet to access our database. The database uses windows pop up widely important information. Problem is that Firefox absolutely will NOT stop block popup windows no matter what I try. At first I added our database server to the list of exceptions. It worked for a while, but soon after resumption of the important pop-up blocking. I then completely disabled the blocking of popup windows (options > > content > > unchecked "block popup windows"). It did not work until I closed and reopened Firefox. A week later (today!), Firefox takes over again blocking the pop-up windows. I double checked my settings to confirm that Firefox still claims to have the popup blocker off.
  At this point, I am at a loss on how to proceed. I looked at other issues similar and my frustration (and certainly their even more), individuals requesting repeatedly told them to turn off the blocker of popups even after explaining that they already have. Help would be very appreciated.

  Thanks for the description of the Firefox Safe Mode. I just thought that Safe Mode is a condition under which we could launch Windows XP in a minimal operating system by starting a startup sequence, hold down the F8 key and effectively manage the prrams troubleshooting and maintenance for Windows. It seems that the Windows XP of Firefox version could run not affected by a virus, a worm or other malware, and ge fixed.

  Please try this Linux distribution. They are many, and I'm a fan.

• How to manage the threads for TCP communication?

  Hello

  I have a project to control two separate applications (C++ and LabView) and two of them are implemented as server. Another client program (C++) is used to control applications. Communication between them are implemented using TCP socket. The client program sends the message to start or stop tasks on servers. The client program also sends time (HH) with the message start and end to determine when to start or stop.

  Application in C++ (server): Listening to the request for the connection and when gets one, it creates a thread of communication allowing to manage this and listen again to another connection. Communication wire crossing of handles and messages when it receives a start or a stop message, it creates a thread of timer with the received time to trigger a task at the time specified. And after that he expects the client message. So, here, when the thread (communication, timer) is necessary, it is created.

  In LabView (server): I tried to create the same as the C++ server. But, in manual of LabView and other discussions of the forum, I got that LabView is multithreaded and it can be done with the help of the loop independent. So, I had to create four loops in a diagram:

  1. wait the new connection

  2 manage the communication for the already received connection

  3. start the timer

  4 stop the timer

  and they are executed at the beginning of execution and communication between them are managed using local variables. But, 2, 3 and 4th loop can handle only one connection and it can handle another if the current is closed. The C++ application can handle multiple connections by creating the thread when it is necessary, but not at the beginning of the application.

  Is there a better way to implement this in LabView?

  Is it possible to manage multiple connections and create the diagram node/block (such as a wire) dynamically as C++?

  Thank you.

  There are several ways to do so in modern LabVIEW and you should probably seek the Finder example for TCP examples. The classic is to transfer the refnum of connecting the listening loop in a communications loop that adds to an array of login credentials and then constantly iterates through this array to make the communication. He works on LabVIEW 4.0 perfectly for me even for applications with basic HTTP communication protocol. But you must make sure that the communication for a connection is not delaying his work for reasons that would delay the handling of other connections too, because they are really of course worked on sequentially. If you encounter an error, the connection ID is closed and removed from the table.

  The other is that create you a VI that makes your entire communication and ends on an error or when the order quite. Make this reentrant VI and then launch it through VI server as the instance home, passing the refnum of newly received connection form the listening loop. Then use the method to Run let start and operate as an independent thread.

  For all these, you should be able to find an example in the example Finder when searching for TCP.

• Why the block diagram is disabled?

  What do I do now?  Please, look at the attached picture.  A VI that I use as a Subvi in various different programs suddenly started looking like I had used the application builder to create an exe out of it (but I don't have!).  The only options are Start and run continuously, and the block diagram is disabled.  What I did to get into this mess?  How to cancel everything that I did, so I can edit the schema-block again?  For any help or suggestion would be greatly appreciated.

  Thank you!

  You have somehow managed to record without a block.

  Go back to the last working back up and start from there.  You have backups, right?

  Lynn

• Third-party tool to draw the rectangle on the block diagram

  I know he was once a third party tool that allowed me to draw a rectangle of Nice double border on the block diagram.  Yes, it's the not the front panel block diagram.  It was very useful to make annotations and designating functional groups.  Does anyone know what this could be?  I installed Package VI Manager and went through everything I can think of without finding her.

  Unfortunately, the documentation for those modules potentially very useful is poor.  The 'Get info' is terse point of unnecessary and by clicking on "Product Home Page" rarely gets you more than a logo, not informative.  Surely there should be more details somewhere.

  I don't know what you're referring to the tool. What is this logo? Maybe someone can recognize.

  What is the problem with the flat frame?

• Outline of the block diagram flashing red

  Hello. I don't have access to the Vi in question at the moment so I'll make it as General as possible. My Vi worked properly for a week or two, but today it started to flash red around the edge of the block diagram. Once the Vi makes the block diagram whole black for a while, followed by the red square around him. What is this red box? They are still able to run the Vi, it's why I can't stop their however, it is not a display of alarm or anything like that. I tried to watch as they run, but am getting no where fast. I just want to know what means the flashing red box does not pinpoint the problem. Thank you

  This means that your chart has been set to a big "breakpoint." Go to View > breakpoint Manager and delete the offending breakpoint.

  If you hold down the CTRL key while running a VI, LabVIEW adds a breakpoint at what you click on, so just be careful with that. I accidentally added breakpoints to my code more than once.

• Organize and manage the display

  I wrote a program on the analysis of the data. It is essentially a large program containing a number of nodes of formula. What is the best way to manage it so that I can easily record.

  the display also contains a lot of buttons and graphics. Is there a way through which I can switch automatically from one region to the other. Selection of some files and certain similar operations are usually required for the market for once only. It is possible to jump to the location next to the display panel after making the necessary here?

  Is it possible to access the next TAB automatically using logic on blockdigram?

  sukhiray wrote:

  I wrote a program on the analysis of the data. It is essentially a large program containing a number of nodes of formula. What is the best way to manage it so that I can easily record.

  What do formulas nodes? Can't answer your question since we do not know what you want "recheck". Please provide some details about what you're trying to do.

  the display also contains a lot of buttons and graphics. Is there a way through which I can switch automatically from one region to the other. Selection of some files and certain similar operations are usually required for the market for once only. It is possible to jump to the location next to the display panel after making the necessary here?

  Based on your other post , you seem to have done something relating to the tabs already, it seems that you have already answered your own question regarding the grouping of things.

  Is it possible to access the next TAB automatically using logic on blockdigram?

  Yes - just write a value to the terminal of the control tab on the block diagram. The value is the page to display. Right-click on the block diagram of the Terminal tab and select Create-> constant. Then select the page to display.

• With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system forever

  With the help of windows Explorer XP does use CPU to go to 100% and the blocking of the system, forever, until closing by force.  What can I do?

  It is very difficult to manage my files.

  I suggest you download Process Explorer. This freeware utility performs a similar function to the Windows Task Manager, but it goes much further.

  For more information about Process Explorer, see here:

  http://www.Microsoft.com/technet/sysinternals/SystemInformation/ProcessExplorer.mspx

  Explorer.exe is used by a number of applications. The posting process and see which element below uses explorer.exe.

• Windows Mail. Cannot add the domain of the sender to the blocked sender list

  Mails are received without a good 'from' address.  They now have the shape of the House of garbage.  NOTES not real names.

  I inadvisedly signed up for something the House of garbage and other offers from partner sites.  House of garbage and partner sites all start sending me waste in large quantities.  They all had one thing in common - all spam emails came rubbishionmx.com.    I had managed to block this domain by adding it to the blocked senders list.

  Now I get these emails again in my Inbox.  Any attempt to add the domain to blocked senders list fails. Probably due to no dΘcodeur address.

  What should I do now?

  You are welcome. Are you speaking of the only rule address book? Depending on the type of legitimate mail you get, some like it and some do not.

  Start with the only rule of AddressBook and you receive a message that you want people not in your address book (E-mail from companies, bills, your ISP, etc), you can add them to the rule.

  Tools | Message rules | Mail | New.

  Box 1 - Where the From line contains people {check it out}

  Box 2 - Check: delete it & stop processing more rules if you want messages not in the address book to go to deleted items, or you can create a spam folder and direct them here.

  You can choose to delete the server, but be careful because you never have messages downloaded to any folder, if you choose this option.

  Box 3 - Click on the blue words contains people

  Click on the first address to select it. Scroll to the end and hold down the SHIFT key while you click the last address. This will highlight all. Right-click on it and click on from the menu that appears.

  Now, click Options and choose: Message * contains no of * the people below in the top of the page Options area, then choose: Message corresponds to one of the people below in the background Options box.

  OK your way out of the new rule.

  Now, only the addresses that you entered will be uploaded to your Inbox. You won't see other emails.

  Remember, if you add a person to your address book, you must add to the rule. It will not automatically be added.

• 0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted

  Hello! I got this message from malware (I clicked to delete) in surfing on firefox and after awhile the explorer.exe closes with an error. I try to open the Task Manager and it says explore cannot be found!
  I rebooted and then I got this message "0xC000021A {fatal system error}, the initial session process or the process of the complete system in unexpected ways with the blocking state 0 x 00000000 (0xc0000034 0x001008ac) the system has been halted" and can't get anywhere.
  I can't even go in safe mode, the same error messages appears.

  Hi James,

  You could try the Startup Repair to see if it solves the problem:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hard drive does not correctly identified under Win7 64 bit and the blocking of access to the disk.

  I use a Maxtor Ultra 16 L01F500 SATA, but Win7 (64 bit) is to identify it as a SCSI drive Maxtor L100P0. He not only identifies by mistake, but also blocks access. I get an error indicating that the location is not accessible. Under computer management, the drive is there and gives the correct size and format (NTFS - was previously my main drive until I upgraded to Win7) when we look under properties. Also, Windows shows the drive is healthy and active. Don't know what to do to get access again (I have admin access to the player thought that would help). I also ran the disk error checking and it showed no errors. You don't know why Win7 has misidentified or why it will not allow access. Any info or help would be appreciated. I can't seem to find the drivers for the drive, otherwise I would have tried that. Thanks for reading.

  In disk management, remove this disk partitions, and then create a new partition

• Malwarebytes 'has managed to block access to potentially malicious Web site.

  Hello
  Did someone have the problem I, m very experience regularly I run win 7 Home Edition and constantly I, m getting this message.
  I use utorrent to my D/L without any problem at all, but this message on my T/Bar. I regularly run the Malwarebytes Anti Malware to make sure that my pc is not infected message is... Malwarebytes 'has managed to block access to potentially malicious Web site... "  Type the incoming port is and treat: utorrent. can exe I ask for your help to remove this annoying message.
  Thank you
  Dennis

  Hi Dennis!

  I suggest that check you the answers here: http://www.malwarebytes.org/support/consumer/

  See you soon
  Julia

• The block, by removing the block, by asking questions of compensation block

  Hello

  The current design of the shape is as below (without changes to the formatting and design)

  (1) has a P - database no block parent heading

  (2) has a child block C - block of data with a single table T

  In essence, the data is stored in a single table

  How to achieve the following

  (1) clear the block (both P and C) If you erase the block P

  (2) by deleting the records to both P and C, if the deletion of the record in P

  (3) by deleting records in C

  (4) ask Parent P (F11 and F11 control) reviews and pulling on the files in C (Ctrl + F11)

  Concerning

  S

  Hello

  Pls use for their feature the following...

  1. you can use WHEN - BUTTON - PRESSED to erase the two Trigger block using Clear_form;

  2 & 3 - oracle database to create relationship master-detail between tables using foreign keys and cascading deletes using the FOREIGN KEY constraint with the ON DELETE CASCADE clause. Oracle/PLSQL: delete foreign keys with cascade

  However, Oracle Forms manage thing delete cascade internally when you define the relationship properties. I recommend the creation of another table master P with the relationship specified in table C.

  U GOLD create a relationship out of shape between the two blocs.

  If not, try to use-DELETE or KEY of VALIDATION Trigger at the level of the form, FOR INSTANCE:

  Note: do not to consider deleting the master, since non-base of data block DELETE is used ONLY in db transaction deleting.

  So you can set their NULL values as

  :P_block.dept_id :=NULL;

  or you can use CLEAR_ITEM;

  CLEAR_ITEM('P_block.dept_id');

  Syntax

  REMOVE the TABLE Table_Name

  WHERE search_condition;

  Example of

  IF: P_block.dept_id is NOT NULL, THEN

  DELETE T

  WHERE t.dept_id =: p_block.dept_id;

  4-to resolve this point

  PLS, set the property default_where of the data block C for example

  dept_id =: p_block.dept_id;

  Therefore, to create a TIME-NEWS-BLOCK-INSTANCE Trigger on C block diagram

  Write the following text

  GO_BLOCK('C');

  EXECUTE_QUERY;

  Amatu Allah.