Manage users of a Wi - FI connection

Similar Questions

• How to run the Manager user interface programmatically

  I am looking for a method to run programmatically (from Labview), the Manager user interface, and then to connect it.

  Is there an API from .net to who?

  Thank you

  Note: I developed for earlier versions of VeriStand, a high-level application that manages projects of test benches and their versions. I want to update with the new manager of the user VeriStand interface.

  It is not a .NET API to control UI Manager, but there are some command line utilities, you can use to launch the user interface Manager, open a specific project, specify the IP address of the gateway to use and connect automatically.

  Try the following command line arguments:

  /nivsprj 'c:\project.nivsprj' Gateway localhost / connect

  They are documented in the online profile of Stimulus help editor.

• Toshiba E-Studio printer - want to manage user impression in HIGH-LEVEL

  Hello

  I have several Toshiba E-Studio printers and I want to manage user impression in HIGH-LEVEL (my users are in Active Directory in Windows 2003)

  I tried but I can not connect department code with users of the AD and I keep getting my printed documents as invalid.
  I hope someone here will know how to solve this problem

  Thank you

  I have fear of m in this forum you will not find the printer experts.
  Most of the users here in this community are common for laptop / tablet or multimedia enthusiasts.

  But I found this page of Toshiba's interactive training manuals.
  http://business.Toshiba.com/USA/support/training/index.html
  These tutorials can help you learn how to perform various functions to your device e-STUDIO user

  It might be useful for you.

• Receive the Error Message "the user profile Service could not connect. Cannot load the user's profile' trying to change the administrator password

  Original title: how to change a password for an administrator account that does not work properly?

  When I try to change the settings for an account via the Control Panel, I get the admin password, but nothing happens. Close the popup box, but the program I want to open do nothing. I tried to change the password itself on the administrator account, but when I try to log on it, the message that appears is "the user profile Service could not connect. User profile cannot be loaded. "So far, I have not found a way to change the admin password or even that the password works. I tried to remove the program responsible for Parental control in the Task Manager, but it is too safe for me to enter. Is it possible to restart the Parental control or the account administrator if I can't access?

  Hello

  
  Were there any changes (hardware or software) to the computer before the show?
  
  Perform the steps in the article mentioned below and see if the problem persists.
  http://support.Microsoft.com/kb/947215
  
  Hope that helps.
   

• The window Task Manager users send a message to users

  Can someone help me install send a message to the user on Windows 2008rs on Windows Task Manager user...

  Well, that's the case I click with the right button on the taskbar click Start Task Manager, click user and do a right click on a user, click send a message, I type a message and click OK and it says (your message to the user Paul (sessionid = 1) could be sent. Access is denied. Can someone please help :).

  Phongng714,

  The error that you normally get is due to a lack of Message special access permission rights. You can learn more about this here. You will notice in the section Additional Considerations that he mentions this authorization. You can manage permissions on a per connection basis in Remote Desktop Session Host Configuration. The permissions are listed on the Security tab in the connection Properties dialog box.

  Could check you the permission level and see if that solves it.

• locked user is still able to connect

  Hello world!
  
  I create users for my application manually inside the application. I have a lock_user process, that is executed when the user clicks on a button and it must lock the user into the form on the page so it cannot connect to the app more. It seems to work, because in "managing users and groups" - section, the user is locked. In any case, the user CAN still access my application. I use the default login page.
  
  This is the code of my approach:
  
  BEGIN
  
  UPDATE user
  SET batch = '0'
  WHERE user_id =: P45_user_ID;
  
  APEX_UTIL. LOCK_ACCOUNT (p_user_name = > upper (:P45_USERNAME));)
  commit;
  END;
  
  The update of the user to the table is just for information, I do not use the connection table. What might have gone wrong? Solutions, tips or advice are appreciated!
  
  -Friday-
  
  Published by: 943770 on the 30.06.2012 03:01

  Hi 943770,

  have you checked the setting "Account of Expiration and locking" (as an admin workspace go to Administration-> Service manage-> Set Workspace Preferences) or
  the parameter "require the user account Expiration and locking" (as long as an administrator of the instance go to manage Instance-> Security-> Login control workspace) if one of those is enabled?

  Help text for "Account Expiration and locking":

  Make a selection to determine whether the end user Application Express accounts can be expired or locked.
  This feature applies only to the user accounts created using the user Application Express management interface. Available options include:
  Enable
  Disable
  This function provides additional authentication for applications security. If you select Enable, user account passwords expire after a configurable time period,
  accounts will be locked after a number of configurable authentication failures, and passwords can be configured to expire after the first use.
  If the Application Express Administrator for this installation set Expiration account user require setting environment and lock Yes, this means that the function must be
  allowed for all the workspaces and the element display turn on and cannot be changed by the administrator of the workspace.

  Concerning
  Patrick
  -----------
  My Blog: http://www.inside-oracle-apex.com
  APEX Plug-Ins: http://apex.oracle.com/plugins
  Twitter: http://www.twitter.com/patrickwolf

• Managed user group cache

  Hello
  
  I created the Group of managed users cache as follows:
  
  create cache group writewherecache usermanaged
  AUTOREFRESH
  DIFFERENTIAL MODE
  INTERVAL OF 30 SECONDS
  STATE
  of interchange.writewhere
  (PK NUMBER NOT NULL primary key,
  VARCHAR2 (40), PROPAGATE) ATTR
  where (interchange.writewhere.pk between ' 105 'and ' 106');
  
  
  Oracle have 5 rows in the table, but now TT ' select * from interchange.writewhere ' statement doesnot show any result.
  
  
  What is the problem?
  
  Published by: user11969173 on November 4, 2009 02:30

  Yes, AUTOREFRESH State must be "suspended" to run a GROUP of CACHE of LOADING. By default, State is set on a break when the cache is created but set you it explicitly on IT in your create statement.

  When you run the LOAD CACHE GROUP statement, what was the response? It is said normally ' n instances cache loading "." He said in your case? When have you under inert atmosphere the 5 rows in oracle, you post the transaction? If you connect to Oracle using a new SQL * more (or SQLDeveloper) session you see lines in Oracle?

  Chris

• How can I prevent users from Apple ID to connect to the server?

  We are a small company that uses a Mac Mini Server. We just clean installed 10.11.4 on new SSD, I installed.

  After you have configured the actions, anyone can connect even when they do not have a username or password and that's because they use the same account as the server iCloud (we do this to keep all calendars, reminders, mail, etc. in sync), but it is automatically all have their connect you to the same user for file shares. I didn't have this problem before. And I certainly don't want anyone logged in as the same user. The guest user is disabled.

  I searched and searched for the answer and found on previous operating system but not El Capitan.

  So, how to disable the connection with Apple ID?

  I found the solution, and I want to share it.

  If you server is under

  Users accounts:

  Then you right-click the user and select advanced options. If you have anything in the alias, which would cause if logging the user with an identifier to Apple. That might be true for all users, not just the one connected locally.

  If you do not have server and you share settings:

  System preferences, then users and groups. Then, you need to unlock downstairs. Then you right-click the user and choose advanced and you options if you have anything in the alias, they could connect without a username and password if they are connected to the appleID already.

  I hope this helps you.

  

• Satellite L855 - 11 p: Win 7 - user profile Service failed to connect

  Can not connect. The message reads user profile Service failed to connect. User profile cannot be loaded"

  Y at - it a bypass key?
  Ideas please.

  Fine machine when I logged out/shut down last night but can not pass this message today.

  Hello

  Please take a look here in this Microsoft Knowledge base article:

  [You receive a "the user profile Service has no logon error message:"] http://support.Microsoft.com/kb/947215]

  There are different ways to fix it.

  Your comments would be appreciated.

• The user profile Service failed to connect

  "The service user profile Service could not connect. User profile cannot be loaded. "What does that mean?  How can I connect?

  Hello

  You can try the following.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select Safe mode and press ENTER.  If windows will load in this mode, on the Start Menu, click principally made programs, click Accessories, click System Tools and run the system restore.  Choose a restore point at least 24 hours prior to the issue of logon and then proceed to the restoration.  When you are finished, Windows will restart as normal in order to check if you can now connect correctly.

  Another option if the above does not help is as follows.

  Shut down the laptop.  Tap away at f8 that you start the laptop to enter the Windows Recovery Console.  Use the arrow keys to select "Start using last good known Configuration" and press ENTER.

  Kind regards

  DP - K

• How can I get my account? "the user profile service could not connect..." User profile can not be downloaded... »

  I can't access my account... message says: "the user profile service could not connect..."  User profile can not be downloaded... »

  Help, please...

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• our administrator user on the computer just connect.

  our administrator user on the computer just connect.
  whenever I click on it (it does not require a password) it tells me I can't log on because the user didn't load, I know not what to do or how to fix it...
  Please help me :(

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• "When I tried to sign on the computer, I get the following message: the user profile service service failed connection, failed to load the user profile.

  "Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please

  Go to Safe Mode and do a system restore. See the link below:

  The user profile Service has not logon. User profile cannot be loaded
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8

  Follow the links on the post.

• The user profile Service failed to connect. User profile cannot be loaded.

  The user profile Service failed to connect. User profile cannot be loaded.  Plus all the other user 5 passwords no longer work nor password records or profiles comments or PCL. Under Safe Mode, I am forced to reactivate the Vista operating system before use but cannot mode without failure. How can I get around this block?

  I think you should check for malware. You will not have the particular malware that is mentioned in the following Article, but the Article describes in great detail to try to regain control of the computer. If regain you control, we hope, you can use system restore to go back ahead before the problem arose.

  It would be useful to know what anti-virus software has been installed on the computer, as the ability to restore the system to function properly may be seriously jeopardized if you use Norton and some other software.

  http://www.myantispyware.com/2011/02/21/how-to-remove-Internet-Security-Essentials-virus/