Remote Server Update Manager with different http port

Similar Questions

• Server Update Manager vCenter - host supports

  I am currently preparing our environment for the upgrade to vCenter Server v2.0.2 to Update3 V2.5

  Currently, we only have 3.0.1 and 3.0.2 hosts and I'm busy to patch the 3.0.1 hosts to satisfy the prerequisites for the upgrade of the vCenter server.

  My question is, Update Manager supports the correction of the old armed forces or is it only 3i and 3.5 hosts it supports.  I read it somewhere but can't seem to find a definitive answer anywhere

  Thanks in advance for any help you can give

  See you soon

  D.Misbehavis

  Hi Davis,.

  Take a look at the compatibility guides, you'll find this info.

  VC 2.5 U3 patches ESX 3.03, 3.5Ux and ESXi

  Have fun.

• Update records with different IDS

  Hello
  
  I am looking for the possibility to update some records using the new id with the column with a different id values
  
  example of
  
  the table contains some these documents:

  id    gross      net
  
  ========================
  7     0,1     0,0507749
  8     0,2     0,1015499
  9     0,5     0,2538748
  10     0,83     0,4214
  11     0,85     0,4315873
  12     1,99     1,010422
  13     2,44     1,2389094
  14     0     0
  15     2,59     1,3150719
  16     2,99     1,5181718
  40
  41
  42
  43
  44
  45
  46
  47
  48
  49

  and I would like to insert the same gross and net of IDS 7-16 column values
  column with the ID of 40 to 49 in the same order.
  This is why I would like to get the result that I describe below:
  

  id    gross      net
  
  ========================
  7     0,1     0,0507749
  8     0,2     0,1015499
  9     0,5     0,2538748
  10     0,83     0,4214
  11     0,85     0,4315873
  12     1,99     1,010422
  13     2,44     1,2389094
  14     0     0
  15     2,59     1,3150719
  16     2,99     1,5181718
  40    0,1     0,0507749
  41    0,2     0,1015499
  42    0,5     0,2538748
  43    0,83     0,4214
  44    0,85     0,4315873
  45    1,99     1,010422
  46    2,44     1,2389094
  47    0     0
  48    2,59     1,3150719
  49    2,99     1,5181718

  Thanks in advance

  update  y1
  set (gross, net)=(select gross, net from  y2 where y2.id=y1.id-33)
  where y1.id between 40 and 49;
  

  You must replace with your real tablename.
  (not tested).

• Updated App with different DPS license

  Can someone advise me on the following scenario. I have a multi App edition, version 1.0 live in the Apple store using the DPS account [email protected]

  I then upgraded the application 2.0 on the Apple store, but the new version uses a different account DPS, [email protected]

  What happens in this scenario? Especially for users of the application who have purchased a subscription to the title of the version 1.0 (ie the other DPS account).

  Note: The 2 DPS accounts above are 2 different licenses DPS.

  You must first build the new application for a new account using the same certificates and using the same bundle id and include the same product id subscription in App Builder. Then you must republish the folios of account new account DPS application. Publish these older folios with the same product id. In this way, when you create and update using the new DPS account, all your subscribers would have access to download the previously titled folios.

• query users to mulitple update block with different values

  Hello

  I need to write a SQL script to update the information of multiple users (400) in the database.

  Here's the query I use to update a single user:

  setting a day of usr set usr_login = "ROBERTAA_OLDx", USR_EMAIL = 'robertaa@abadrer_dellllx.com' where usr_login = 'ROBERTA ';

  usr_login and usr_email must be different for each user.

  What is the best way to achieve this?

  Please suggest

  Thank you

  OK, I see.  Here is my version of update:

  DROP TABLE usr;
  
  CREATE TABLE usr
  (
   usr_login VARCHAR2(20)
  ,usr_email VARCHAR2(50)
  );
  
  INSERT INTO usr VALUES ('PENUMALH', '[email protected]');
  INSERT INTO usr VALUES ('IAMTEAM', '[email protected]');
  INSERT INTO usr VALUES ('TESTSOA2', '[email protected]');
  INSERT INTO usr VALUES ('TESTADF1', '[email protected]');
  INSERT INTO usr VALUES ('IAMTESTIR2', '[email protected]');
  INSERT INTO usr VALUES ('IAMPWDTT', '[email protected]');
  INSERT INTO usr VALUES ('IAMPWDTI', '[email protected]');
  
  COMMIT;
  
  SET LINESIZE 80 PAGESIZE 20
  
  COLUMN usr_login FORMAT A20
  COLUMN usr_email FORMAT A50
  
  SELECT *
    FROM usr;
  
  UPDATE usr t1
     SET (t1.usr_login, t1.usr_email)
         =
         (SELECT t2.usr_login || 'OLD' || TO_CHAR(ROWNUM) AS usr_login
                ,SUBSTR(t2.usr_email, 1, INSTR(t2.usr_email, '.', -1, 1) - 1)
                 || '_delxxxxasdf' ||
                 SUBSTR(t2.usr_email, INSTR(t2.usr_email, '.', -1, 1)) AS usr_email
            FROM usr t2
           WHERE t2.usr_login = t1.usr_login);
  
  COMMIT;
  
  SELECT *
    FROM usr;
  

  And the output:

  Table dropped.
  Elapsed: 00:00:00.05
  Sequence dropped.
  Elapsed: 00:00:00.03
  Table created.
  Elapsed: 00:00:00.03
  Sequence created.
  Elapsed: 00:00:00.03
  1 row created.
  Elapsed: 00:00:00.13
  1 row created.
  Elapsed: 00:00:00.04
  1 row created.
  Elapsed: 00:00:00.03
  1 row created.
  Elapsed: 00:00:00.03
  1 row created.
  Elapsed: 00:00:00.03
  1 row created.
  Elapsed: 00:00:00.03
  1 row created.
  Elapsed: 00:00:00.03
  Commit complete.
  Elapsed: 00:00:00.02
  
  USR_LOGIN            USR_EMAIL
  -------------------- --------------------------------------------------
  PENUMALH             [email protected]
  IAMTEAM              [email protected]
  TESTSOA2             [email protected]
  TESTADF1             [email protected]
  IAMTESTIR2           [email protected]
  IAMPWDTT             [email protected]
  IAMPWDTI             [email protected]                                
  
  7 rows selected.
  Elapsed: 00:00:00.03
  7 rows updated.
  Elapsed: 00:00:00.04
  Commit complete.
  Elapsed: 00:00:00.02
  
  USR_LOGIN            USR_EMAIL
  -------------------- --------------------------------------------------
  PENUMALHOLD1         Hari.Penumalli@abc_delxxxxasdf.com
  IAMTEAMOLD1          iam.team@xyz_delxxxxasdf.com
  TESTSOA2OLD1         test.soa2@gio_delxxxxasdf.com
  TESTADF1OLD1         test.adf1@yu_delxxxxasdf.com
  IAMTESTIR2OLD1       iam.testir@ou_delxxxxasdf.net
  IAMPWDTTOLD1         iam.pwdtt@iuet_delxxxxasdf.in
  IAMPWDTIOLD1         iam.pwdt@oiyoi_delxxxxasdf.com                    
  
  7 rows selected.
  Elapsed: 00:00:00.03
  

• He would work to have 3.2 and 4.2 on the same server of db with different web servers?

  Hello

  I have three existing environments which are 11g and Apex 3.2 on Linux (Dev, Test, Prod). I have also three front-end web servers that are Windows 2003 with IIS for Apex (Dev, Test, Prod)

  We have three new Windows servers running 2008 we upgraded to.

  So, my question is on the upgrade of Apex to 4.2 at the same time. I would like to have the new Windows Server (Dev), and then point to the same server to Linux as my old Windows 2003 db. And it points to the same instance of db. My goal would be to achieve production with this configuration and then just do a redirect to URL on the old Windows 2003 server and that it points to the new Windows Server 2008. In this way, that I wouldn't need to move data from one instance to another.

  Would this work? I have installed 3.2 and 4.2 on the same instance of db? A 3.2 Windows Server and have a pointed Windows 4.2 server on the same back-end server?

  APEX lives on the database instance. Run you the APEX on the database upgrades. The short answer to what I think is your question is No.

  I don't know what is the relevant motivation?

• How is it updated managed with JPG files created in a zone time and copied on a PC in another time zone?

  I took a picture in France 5 / 31 at 13:45. The unit was set to the time European (France).  That evening, I copied the file to the SD card for my laptop that has been arrived at the normal time of the Center. When I looked at the Date modified time stamp it shows 5/31 at 06:45. It was the exact time that the image was created in France by using the CST. Why? How Vista handles this area in this case, and how he knew the zone I was in that?

  Hello Mike,.

  There's no magic here, if I can understand how it may seem so.  Hard drives now use the NTFS file system, which stores all dates and times in universal time coordinated (UTC), formerly GMT.  When you view the file information, Vista applies the time zone selected by the user to correct the UTC value in local time before posting.  Some electronic devices also store files in UTC format, and of course your camera is one of these.

  Mr. Doug in New Jersey

• I would like to add additional management port with different user service

  Hello

  Version of the grid control is 10.2.0.1.0.

  My company has now more than 100 target or with teams of Directors access to the WHO,

  The original grid for us infrastructure is 1 WHO + 1 OMR. WHO answers very slowly recently.

  Now we decide to add additional management service in another machine.

  The user to operate the original SGD is different from WHO come, it will be a problem when you configure the new OMS?

  The other issue is, we want to use different ports (11200) for the new OMS, it is practical, if OK, how?

  Thank you very much.

  The user to operate the original SGD is different from WHO come, it will be a problem when you configure the new OMS?

  OK, you can choose any username, any username to install additional management service in another machine.

  It has nothing to do with the configuration of the original WHO. They remain in the 2 totally different machine. SST and their, OC4J OracleAS Web Cache

  operate independently.

  The other issue is, we want to use different ports (11200) for the new OMS, it is practical, if OK, how?

  Thank you very much.

  It comes fully documented standard:

  Oracle.sysman.top.OMS:s_staticPorts=/home/Oracle/MyPort.txt $ / Disk1/runInstaller

  The content of /home/oracle/myport.txt may as follows:

  Oracle = 11199 Server HTTP port

  Oracle HTTP = 11200 server listening port

  Oracle HTTP = 4443 Server SSL port

  Listening port of the server (SSL) Oracle HTTP = 4445

  Oracle HTTP Server Jserv 8007 = port

  Server diagnosis Oracle HTTP = 7200 port

  Oracle = 1830 Management Agent port

  Application Server Control RMI = 1850 port

  Notification Server Oracle application port = 6003

  The Notification Server Local port Oracle = 6100

  Notification Server Oracle 6200 = Remote port

  Connect the port Loader = 44000

  Cache of objects Java port = 7010

  Port of DCM Java object Cache = 7101

  Port control application server = 1810

  Web Cache HTTP port listening = 11199

  To listen Cache HTTP Web site (SSL) port = 4443

  Cache Administration Web site port = 4000

  Website of the Cache Invalidation port = 4001

  Cache statistics port Web site = 4002

  Oracle Net Listener = 1521

  Management Service Upload (non - SSL) = 11199 Oracle port

  Management Oracle Upload (SSL) Port = 11198

• VPN connection to access the content server on the HTTP port only

  Hello

  We have ASA5520, and we want to set up an IPSEC VPN profile so that one of our partners can access a server and only on the HTTP port.

  I tried to Configure tunneling split with an extended ACL, but probably I'm missing something. I just set up the ACL so that it included all source IP of our server on the HTTP port, but when testing, it did not work.

  However, if I configure a Standard ACL on the split tunneling I can access the server and all services it provides.

  Do you know if Miss me anything on the extended ACL configuration?

  Should I configure it any other way?

  Thanks in advance.

  Best regards

  Igor

  Hi Igor,.

  To do this, you must use a VPN filter.

  Please see this:

  PIX / ASA 7.x and later: example of filter (allowed specific Port or Protocol) Configuration L2L VPN and remote access

  * Split tunneling should be a Standard ACL.

  HTH.

  Portu.

  Be sure to note all the useful messages.

• vSphere 6.0 + is not compatible with vmware vsphere Update Manager vcenter you install.

  Hello

  We run with vCenter 6.0 version 6.0.0 build 2997665.

  Installing Update Manager in different windows server with vCenter 6.0 U1 installation media.

  During the installation of Update Manager, it gives below error.

  Error: Vcenter is incompatible with vmware vsphere Update Manager that you are installing.

  Problem has been resolved after downloading installation VC VMware-VIMSetup-all - 6.0.0 - 2800571.iso, which is compatible with running VC build version.

• Update Manager is not compatible with SQL 2008 Standard edition?

  I noticed in the documentation for compatibility, all in vCenter Server 4 shows also compatible with standard SQL 2008, vSphere Update Manager not compatible with her poster (if it does not say that it is compatible with the version of the Enterprise edition). Is this correct? I've seen other discussions here, which indicates that, in some cases, the documentation is wrong. Someone at - he here tried running vSphere Update Manager with a SQL 2008 Standard database and I can confirm that it does or does not work?

  Hello

  Please take a look at this article: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1012971

  Thank you.

  If you have found this unit or any other answer useful, please consider to allocate points for correct or helpful answers. *

• Move another Update Manager server

  So I try to spend our Server Update Manager to its own server in our Virtual Center (vCenter?) server. With hindsight this may not be the best approach, but here's what happened.

  I will stop the service and uninstalled the update of the dedicated server VMUM Manager. I then did a clean installation of U3 Manager Update on our Virtual Center service, with a new database.

  So now, I try to get the Extension Manager update from VMware on the local VI Client is uninstalled, or pointing to the new server VMUM. I found no registry keys on the clients or the VC that point to the old Manager Update Server, but I do check the VC Pb.

  Now my client of VI, said the updated plugin Manager is installed, but when I try and turn it on, it expires either (the remote server was too long) or will appear to be activated without any options.

  Any help? Thank you.

  You missed a step somewhere, the Update Manager is VERY simple.  You will not find the registry keys, because it is a service, it responds to requests.  Then the plug-in responds service on VC, all information that responds to updates.  That's about all.

  Your new VC should be turned off.  You install Update Manager.  Then start the VC service, then the service update manager, and if you followed each line correctly and accurately (a bit like the issuance of instructions in the documentation) it will work.  This is a very simple and easy installation.  This is not really complicated, so if it doesn't work, you lack something, does not have something or gave a wrong info for Update Manager to register.

  If you start VC and update manager they give errors?  Did you reboot the VC AFTER the update server manager installed?

  IF all else fails call VM Ware.  But this process should be simple, there is no real major steps.  If all the services are running, it should work...

• VMWare Update Manager Server does not work after changing name of host/IP

  I have Virtual Center 2.5 update 4 and Manager Update on two separate servers.

  I had to rename and change the IP of the Server Manager to update, and now the Server Update Manager does not work.

  Here are two mistakes that I get, when you try to activate the plugin Update Manager:

  "The server took too long to respond" or "VMWare Update manager cannot accept applications because VirtualCenter.

  Server is not reachable, or it's the database is not reachable

  by train to stop'

  That's what I did to change the host name:

  -J' uninstalled virtual UpdateManager 1.0 Clients Center customer.

  -I stopped the Service VMware Update Manager on the update server

  -J' I renamed the update server changed its IP address and the host name and then rebooted the server (without starting the VMware Update Manager Service)

  -J' changed the value of the fields

  dbo. VPX_EXT_CLIENT. URL

  dbo. VPX_EXT_SERVER.UR

  -in the vCenter (on the vCenter server) database reflecting the new name of the server (the new hostnameis to pings to the vCenter server)

  -J' restarted the vCenter Server

  -J' started the Service VMware Update Manager on the update server

  -J' installed the client plugin update manager Virtual Infrastructure client

  -J' have TRIED to activate the plugin, but I got a warning about an untrusted certificate (I guess it happened also when I installed the client for the first time, and everything worked) and then I got two errors:

  sometimes "the server has taken too much time to react" and a few other times "the VMWare Update manager cannot accept applications because VirtualCenter.

  Server is not reachable, or it's the database is not reachable

  by train to stop'

  I think that there are a few other references to the host name of the Update Manager, which I have not changed, on the vCenter server or Manager Update server...

  Does anyone have an idea what do I do?

  Thank you in advance.

  I would try just reinstalling the update on existing installation manager.  Do not overwrite the database in the process so that you shouldn't really lose anything.  Not the plugin, but since the Update Manager vCenter installation media.

  Give that a try and let us know how it goes.

• Update Manager fails to analyze host to upgrade.

  I just recently updated Virtual Server 4.0 Update 1. My next step is to update my servers ESX 3.5 to 4.0 Update 1. After going through the steps and the creation of a reference database that I was unable to analyze the host in order to get it updated. I received the following error message.

  VMware Vcenter Update Manager had an unknown faliure. Responsible for check and tab events and logs for more details.

  Got this error?

  Thank you

  Now, I have the solution. You can find it in http://www.vmware.com/pdf/vsp_vum_40u1_admin_guide.pdf on page 45:

  -vCenter Server and Server Update Manager are installed on the same host and their database instances are on

  two different hosts.

  If you separate the VirtualCenter 2 databases and the UpdateManger to different SQL servers.

  Without having to disassemble, I get the following error message:

  Setup has found that several schemes exist in the database, please remove the additional schemas before you continue.

  If you can not ignore this message, you should really separate the VirtualCenter DB of the UpdateManager-DB.

  What's new with 1 updated in ESX V4.0, it wasn't a problem.

• I can access is no longer my remote server

  This problem occurs for all of my sites with Dreamweaver.

  All of them worked fine expcept since today, when I see my domain on my server to delete, I get the following message:

  "See the files in your repository, you must set its Version control settings.

  How can I fix this and what's happening and for all sites?

  Help is highly appreciated

  Lyse

  http://StackOverflow.com/questions/4125880/getting-to-remote-server-from-Dreamweaver-CS4

  http://stackoverflow.com/a/4251127: "You will see this message when you are in the"repository View' and you have not configured version control. You can check in the FILES tab/window. If you don't press F8 or select window/files. Spend the repository view Local mode, Test Server or remote server as appropriate. »

  Hope this helps,

  ^_^