Management IP pool
Hello
I was wondering if someone can explain (as you can see from the attached picture) why the pool of IP management IP received twice the same blade... I have a pool of 18 IP and they are all affected. The other chassis will be soon connected...
Thank you
Hello
As I can make out, you have selected in your profile service the ability to shoot and the intellectual property of the pool.
Select a profile of serivce-> right pannel work-> management-> is IP address that it pooled?
. / Afonso
Tags: Cisco DataCenter
Similar Questions
-
Order of assignment management IP blade
Hello
Is there anyway to change in order that the management of the IP addresses is assigned?
Example:
I have a pool of IP management of xxx.xxx.xxx.101 with a size of 16 addresses
Managing IP is then assigned to a blade in the Groove 1 and starts on adresse.109, I want the first location of avoir.101
Why this phenomenon occurs and is it possible to change the order?
Concerning
Kim,
From UCSM 2.1 there is a new option to set the order of attribution of the pools is 'default' which uses
Reverse lexicographic ordering, or "sequential".
If you find that you still cannot pools to automatically set the IP addresses for the blades as you want, you can use the "Static" IP allocation for the management IP address. Even if you set a blade a static IP of management between pooled, it will appear in the pool as "assigned" - to avoid duplicate IP allocation.
Kind regards
Robert
-
Unable to create the pool of IP required for configuration VXLAN using the API REST NSX
Basically, I want to configure VXLAN using the REST API. To set up VXLAN, VMKNic IP addressing accepts DHCP or IP Pool. I decided to go with Pool of IP.
To create a Pool of IP "NSX-DEV-IPPOOL-01', I used the REST APIs.»
POST https:// < nsx - ip > /api/2.0/services/ipam/pools/scope/ < id data center >
< ipamAddressPool >
< name > NSX-IP-POOL-02 < / name >
< LG > 24 < / LG >
< gateway > 10.99.134.1 < / gateway >
Lab.local < dnsSuffix > < / dnsSuffix >
< dnsServer1 > 10.99.134.2 < / dnsServer1 >
< dnsServer2 > < / dnsServer2 >
< Plages_ip >
< ipRangeDto >
< startAddress > 10.99.134.225 < / startAddress >
< endAddress > 10.99.134.229 < / endAddress >
< / ipRangeDto >
< / Plages_ip >
< / ipamAddressPool >
Now I can see the Pool of IP in vCenter under NSX Manager-> [NSX-Manager-IP]-> manage-> object-> Pools of IP group.
But when configuring VXLAN, no IP pool is present.
Y at - it all the additional steps required after the addition of pool of IP using the REST API?
Thanks in advance.
Remove the existing IP pool. Then recreate the pool by using the API, but instead of using
with globalroot-0. -
Manage the list of resources by commands?
The VMware ESX 4.1.0 and vCLI are cool. But can I create and manage the Pool of resources by commands?
Thank you.
Depends on your needs, if you are wanting to use the vCLI (remote CLI) commands, VMware has not all scripts in canned food that takes care of the management or the creation of Resource Pools, you must write your own. Here is an example on creating a Pool of resources in a specific Cluster VMware - http://communities.vmware.com/docs/DOC-11448
If you plan to run the commands on the host ESX (i) himself, then you can take a look at vimsh - you can look in usingn vim - cmd hostsvc/rsrc but, once again, this one deals with RP local within the host ESX (i), if you talk about RPs vCenter, you will need to look at the first option.
If you are looking to manage/create the RPs, you can also take a look at PowerCLI, there are a bunch of canned cmdlets that offer this feature and should be pretty simple to start, the requirement is Windows + PowerCLI
So just all depends on what/where you try to do
-
Satellite U205 will not connect to internet
I think it must e a DNS problem?
What are my DNS settings? I put it to automatically set the DNS.
I can run Skype without problem so I know that the wireless router works.I have also 2 other computers work fine on the rounter wireless and access to the Internet.
When I try to Ping www.google.com on the Toshiba I get a negative response, so I can't Ping any URL.
I ran a diagnostic and received the response below.My wireless router is 192.168.15.1 and my ISP router is 192.168.1.1.
Can someone help me. PLEASE, I BEG YOU!
The machine information
Seller: TOSHIBA
Machine Name: Satellite U205
Version: Version 1.10 BIOS
OS: Microsoft Windows XP Professional
OS SP:Service Pack 3Back to top
IP information
ipconfig/all
Windows IP configuration
Name of the host...: SHARONSNEW
Primary Dns suffix...:
Node... type: hybrid
Active... IP routing: No.
Active... proxy WINS: No.Ethernet connection to the Local network card:
State of the media...: Media disconnected
... Description: Intel(r) PRO/100 VE Network Connection
Physical address.... : 00-0E-7B-D9-50-E6
Ethernet wireless network connection card:
The connection-specific DNS suffix. :
... Description: Intel(r) PRO/Wireless 3945ABG Network Connection
Physical address.... : 00-13-02-82-BE-C5
DHCP active...: Yes
Autoconfiguration enabled...: Yes
... The IP address: 192.168.15.103
... Subnet mask: 255.255.255.0.
IP address: fe80::213:2ff:fe82:bec5 5%
... Default gateway. : 192.168.15.1.
DHCP server...: 192.168.15.1.
DNS servers...: 192.168.1.1.Card tunnel Teredo Tunneling Pseudo-Interface:
The connection-specific DNS suffix. :
... Description: Teredo Tunneling Pseudo-Interface
Physical address.... : FF-FF-FF-FF-FF-FF-FF-FF
DHCP active...: No.
IP address: fe80::ffff:ffff:fffd 6%
... Default gateway. :
NetBIOS over TCP/IP...: disabled
Card tunnel Automatic Tunneling Pseudo-Interface:The connection-specific DNS suffix. :
... Description:. Automatic Tunneling Pseudo-Interface
Physical address.... : C0-A8-0F-67
DHCP active...: No.
... The IP address: fe80::5efe:192.168.15.103%2
... Default gateway. :
NetBIOS over TCP/IP...: disabledBack to top
The protocol information
Protocol binding informationMicrosoft TCP/IP version 6
Intel(r) PRO/100 VE Network Connection
Intel (r) PRO/Wireless 3945ABG Network Connection
Map Microsoft Tun MiniportProtocol of the AEGIS (IEEE 802. 1 x) v3.4.9.0
Intel (r) PRO/Wireless 3945ABG Network Connection
WLAN transport
Intel (r) PRO/Wireless 3945ABG Network ConnectionWLAN transport
Intel (r) PRO/Wireless 3945ABG Network ConnectionTOSHIBA Network Device Usermode i/o Protocol
Intel (r) PRO/Wireless 3945ABG Network Connection
Intel(r) PRO/100 VE Network ConnectionPoint to Point Protocol Over Ethernet
Intel (r) PRO/Wireless 3945ABG Network Connection
Intel(r) PRO/100 VE Network ConnectionPoint to Point Tunneling Protocol
Layer 2 Tunneling Protocol
Remote Access NDIS WAN driver
Direct parallel
Miniport WAN (PPPOE)
Miniport Wan WAN (PPTP)
Miniport Wan WAN (L2TP)
RAS asynchronous cardNDIS usermode i/o Protocol
Intel (r) PRO/Wireless 3945ABG Network Connection
Intel(r) PRO/100 VE Network ConnectionTCP/IP protocol oriented messages (SMB session)
WINS Client (TCP/IP) Protocol
Microsoft TCP/IP version 6
Intel(r) PRO/100 VE Network Connection
Microsoft TCP/IP version 6
Intel (r) PRO/Wireless 3945ABG Network Connection
Microsoft TCP/IP version 6
Map Microsoft Tun Miniport
Internet (TCP/IP) Protocol
Network adapter 1394
Internet (TCP/IP) Protocol
Intel (r) PRO/Wireless 3945ABG Network Connection
Internet (TCP/IP) Protocol
Intel(r) PRO/100 VE Network Connection
Internet (TCP/IP) Protocol
Miniport Wan (IP)Internet (TCP/IP) Protocol
Network adapter 1394
Intel (r) PRO/Wireless 3945ABG Network Connection
Intel(r) PRO/100 VE Network Connection
Miniport Wan (IP)
Back to top
Information about the network device
Intel (r) PRO/Wireless 3945ABG Network Connection
Device ID: PCI VEN_8086 & DEV_4222 & SUBSYS_10408086 & REV_02\4 & 3E7C1 280 & 0 & 00E2
Status: activate
Vender Driver: Intel
Driver version: 12.0.0.73
Driver date: 27/04/2008Intel(r) PRO/100 VE Network Connection
Device ID: PCI VEN_8086 & DEV_1092 & SUBSYS_00011179 & REV_02\4 & 6D5B 6 b 1 & 0 & 40F0
Status: activate
Vender Driver: Intel
Driver version: 8.0.21.101
Driver date: 10/10/2005Back to top
Status of communication switch and wireless wireless keyboard shortcut
Wireless Communication switch: on
Shortened wireless keyboard (Fn + F8)
Wireless LAN: on
Bluetooth: OffBack to top
Diagnostic results
Ping option: on
Ping check: Yes
Ping Retry: 3 (times)
Ping Time: Out 300 (ms)< network="" adapter="">>
Description network adapter: Intel (r) PRO/Wireless 3945ABG Network Connection
Status: activate
Mac address: 00-13-02-82-be-c5
IP address: 192.168.15.103
< ping="" status="" list="">
Default gateway:
192.168.15.1 [OK]
DNS server:
192.168.1.1 [OK]
WINS server:
Parameters: no
Proxy server:
Parameters: Do not use< network="" adapter="">>
Description network adapter: Intel (r) PRO/100 VE Network Connection
Status: activate
Cable LAN status: disconnectedBack to top
ConfigFree Version
ConfigFree (TM) 5.90.05
Database 3.00.02Back to top
Network Diagnostics
No problem foundHello
You have posted a lot of info that confuse finally
Generally, the router must manage a pool of IP addresses, the IP addresses should be assigned automatically to each laptop computer that tries to connect to the router.
So in your router settings dynamically assign addresses IP must be activated.In addition, you should check if the MAC address filtering was not activated because this could cause the laptop to connect.
The WLan connection properties contain the TCP/IP protocol. The TCP/IP protocol contains a few options. Here, you must make sure that all (IP address, gateway, DNS) is set to obtain automatically.
-
How to set up LAN on Equium M50
Hello
I have an Equium M50 and recently moved house. In my old House, I got wireless and the Internet worked well. However in the new House, it is a home network router that connects all 4 computers to the internet. I tried to put the LAN cable in my laptop and it doesn't recognize it.
As I am new on LAN I need to download a driver for it or buy a card? Yet once sorry on the simplicity of the post, but no one in the House can help me because they all desktop computers. See you soon
Hello
If you are using a router at home, the connection should be very easy.
Laptop computer TCP/IP settings should be set to automatic.The router manages a pool of IP addresses and should affect a free IP address automatically to a connected computer.
Please check the settings of the router again!Disable the MAC address filtering and check if a firewall is set on your laptop.
Sometimes if the firewall is on the notebook cannot be connected to the router or LAN.
Concerning
-
TCS Web access 503 Server error
Hello
In fact, we install a TCS server to record a streaming of a SX-20, but when we tried to install the application we have trouble with domain and certificate on the server.
We solved the field, but the certificate can´t work properly and think it's worth to open the aplication of the Internet explorer, the error when try to open the application is 503 service unavailable
Anyone know this abut.
Thank you
Best regards
Hey Saul,
(Start > Administrative Tools > Internet Information services manager > application :) Pools)
1. the identity of DefaultAppPool must be: "ApplicationPoolIdentity.
2. make sure that you start the DefaultAppPool:
3. then you will need to restart the: World Wide Web Publishing Service (IIS) (start > run > Services.msc)
4 after that, to stop and restart all the Services of the TCS:
This should solve the problem.
-
Documents showing to the mapped drive, but not redirected Library Documents W7
Hi all
We have a school system that has a n: that is our network home folder.
The Documents Windows 7 library is also redirected to our folder.
If we look on the home network via the N: drive we see documents, however if one looks at libraries, not all documents appear.
Any ideas?
Concerning
Graham Jones
Systems and Network Manager
Pool Hayes Arts & Community School
Hi Graham,
The first thing you want to do is set up the sharing options on the drive or folder you want to share. This requires you to be on the computer that hosts the drive or folder.
If the administrator of the computer had followed the steps mentioned here, you would have access to the library files:
- Click on the "Windows Explorer" icon in the lower left corner of the Windows taskbar to open the Windows Explorer file browser.
- Navigate to the folder to be shared.
- Right-click on the folder to share and select "sharingwith... »
- Click on the option of 'some people' in the context menu. Theshare with users'interface opens.
- Type a user name, or click on the arrow pointing down to the list of users.
- Select each user access to the folder or click on the "everyone" option. Each added user appears in the list of "users". Click on the button 'Add '.
- Click on the arrow pointing down next to each user and select the level of permissions for this user. The options are ' read/write,""read-only ' and 'Delete'.
- Click on the 'Share' button. The folder is now shared with the users specified through the home network. A confirmation window appears.
- Click on the button 'fact' to close the 'sharing ' window.
Please let us know the result. If the problem is still not resolved, we will be happy to help you further.
-
RMAN-06136: &; ORA-04031: unable to allocate for SHARED_POOL
When I run my recovery of tablespace point in time recovery, I get:
RMAN-06136: the auxiliary database ORACLE error: ORA-04031: unable to allocate 1056 bytes of shared memory
On my system target, here is the info for pools:
You can see below that this as my DB to THE puts as well. Here is my info from my catalogSQL> select pool, sum(bytes)/1024/1024 Mbytes from v$sgastat group by pool; POOL MBYTES ------------ ---------- 918.84494 java pool 16 streams pool 16 shared pool 1024.00521 large pool 16 SQL> select * from v$sgainfo; NAME BYTES RES -------------------------------- ---------- --- Fixed SGA Size 2131168 No Redo Buffers 5046272 No Buffer Cache Size 956301312 Yes Shared Pool Size 1073741824 Yes Large Pool Size 16777216 Yes Java Pool Size 16777216 Yes Streams Pool Size 16777216 Yes Shared IO Pool Size 0 Yes Granule Size 16777216 No Maximum SGA Size 2137886720 No Startup overhead in Shared Pool 184549376 No NAME BYTES RES -------------------------------- ---------- --- Free SGA Memory Available 50331648 12 rows selected.
My profile on the DB is therefore:SQL> select pool, sum(bytes)/1024/1024 Mbytes from v$sgastat group by pool; POOL MBYTES ------------ ---------- 176.632385 java pool 4 shared pool 260.00457 large pool 4 SQL> select * from v$sgainfo; NAME BYTES RES -------------------------------- ---------- --- Fixed SGA Size 2133568 No Redo Buffers 6918144 No Buffer Cache Size 176160768 Yes Shared Pool Size 272629760 Yes Large Pool Size 4194304 Yes Java Pool Size 4194304 Yes Streams Pool Size 0 Yes Shared IO Pool Size 0 Yes Granule Size 4194304 No Maximum SGA Size 784998400 No Startup overhead in Shared Pool 67108864 No NAME BYTES RES -------------------------------- ---------- --- Free SGA Memory Available 318767104 12 rows selected.
Version - 11.1.0.7
Type - CARS, 2 nodes Cluster
Server - Win2003, SP4, 3 GHz, 4 GB RAM, 64-bit
Initially the target was fixed at 3 GB of a SGA_MAX_SIZE but I dropped it up to 2048 M.
I guess that the DB to the where the error happens as the export will fail from there. Now, when I went from the size of the target, I would have guessed that the shared_pool would have increased on the DB but it didn't. How can I get my db to get more space for the shared pool and actually complete my recovery.
Recovery Manager: Release 11.1.0.7.0 - Production on Wed Mar 24 14:12:49 2010 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. RMAN> connect target dbaraman@edbtest2 target database Password: connected to target database: EDBTEST (DBID=3958911274) RMAN> connect catalog rman@rmancat recovery catalog database Password: connected to recovery catalog database RMAN> run{ 2> set newname for datafile 1 to "+DATA"; 3> set newname for datafile 2 to "+DATA"; 4> set newname for datafile 3 to "+DATA"; 5> set newname for datafile 4 to "+DATA"; 6> RECOVER TABLESPACE RAMANS 7> until time "to_date('23-MAR-2010 13:36:00','DD-MON-YYYY HH24:MI:SS')" 8> AUXILIARY DESTINATION 'C:\EDBTEST2_backup\oradata\auxdest'; 9> } executing command: SET NEWNAME starting full resync of recovery catalog full resync complete executing command: SET NEWNAME executing command: SET NEWNAME executing command: SET NEWNAME Starting recover at 24-MAR-10 allocated channel: ORA_DISK_1 channel ORA_DISK_1: SID=495 instance=edbtest2 device type=DISK Creating automatic instance, with SID='srmk' initialization parameters used for automatic instance: db_name=EDBTEST compatible=11.1.0.0.0 db_block_size=8192 db_files=200 db_unique_name=tspitr_EDBTEST_srmk large_pool_size=1M shared_pool_size=110M processes=50 #No auxiliary parameter file used db_create_file_dest=C:\EDBTEST2_backup\oradata\auxdest control_files=C:\EDBTEST2_backup\oradata\auxdest/cntrl_tspitr_EDBTEST_srmk.f starting up automatic instance EDBTEST Oracle instance started Total System Global Area 204632064 bytes Fixed Size 2127912 bytes Variable Size 146802648 bytes Database Buffers 50331648 bytes Redo Buffers 5369856 bytes Automatic instance created contents of Memory Script: { # set the until clause set until time "to_date('23-MAR-2010 13:36:00','DD-MON-YYYY HH24:MI:SS')"; # restore the controlfile restore clone controlfile; # mount the controlfile sql clone 'alter database mount clone database'; # archive current online log for tspitr to a resent until time sql 'alter system archive log current'; # avoid unnecessary autobackups for structural changes during TSPITR sql 'begin dbms_backup_restore.AutoBackupFlag(FALSE); end;'; # resync catalog after controlfile restore resync catalog; } executing Memory Script executing command: SET until clause Starting restore at 24-MAR-10 allocated channel: ORA_AUX_DISK_1 channel ORA_AUX_DISK_1: SID=39 device type=DISK channel ORA_AUX_DISK_1: starting datafile backup set restore channel ORA_AUX_DISK_1: restoring control file channel ORA_AUX_DISK_1: reading from backup piece +FLASH/edbtest/autobackup/2010_03_23/s_714403881.525.714403883 channel ORA_AUX_DISK_1: piece handle=+FLASH/edbtest/autobackup/2010_03_23/s_714403881.525.714403883 tag=TAG20100323T133121 channel ORA_AUX_DISK_1: restored backup piece 1 channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:07 output file name=C:\EDBTEST2_BACKUP\ORADATA\AUXDEST\CNTRL_TSPITR_EDBTEST_SRMK.F Finished restore at 24-MAR-10 sql statement: alter database mount clone database sql statement: alter system archive log current sql statement: begin dbms_backup_restore.AutoBackupFlag(FALSE); end; starting full resync of recovery catalog full resync complete contents of Memory Script: { # generated tablespace point-in-time recovery script # set the until clause set until time "to_date('23-MAR-2010 13:36:00','DD-MON-YYYY HH24:MI:SS')"; # set a destination filename for restore set newname for datafile 1 to "+DATA"; # set a destination filename for restore set newname for datafile 3 to "+DATA"; # set a destination filename for restore set newname for datafile 4 to "+DATA"; # set a destination filename for restore set newname for datafile 2 to "+DATA"; # set an omf destination tempfile set newname for clone tempfile 1 to new; # set a destination filename for restore set newname for datafile 21 to "+DATA/edbtest/datafile/ramans.285.714403881"; # rename all tempfiles switch clone tempfile all; # restore the tablespaces in the recovery set plus the auxiliary tablespaces restore clone datafile 1, 3, 4, 2, 21; switch clone datafile all; #online the datafiles restored or flipped sql clone "alter database datafile 1 online"; #online the datafiles restored or flipped sql clone "alter database datafile 3 online"; #online the datafiles restored or flipped sql clone "alter database datafile 4 online"; #online the datafiles restored or flipped sql clone "alter database datafile 2 online"; #online the datafiles restored or flipped sql clone "alter database datafile 21 online"; # make the controlfile point at the restored datafiles, then recover them recover clone database tablespace "RAMANS", "SYSTEM", "UNDOTBS1", "UNDOTBS2", "SYSAUX" delete archivelog; alter clone database open resetlogs; } executing Memory Script executing command: SET until clause executing command: SET NEWNAME executing command: SET NEWNAME executing command: SET NEWNAME executing command: SET NEWNAME executing command: SET NEWNAME executing command: SET NEWNAME renamed tempfile 1 to C:\EDBTEST2_BACKUP\ORADATA\AUXDEST\TSPITR_EDBTEST_SRMK\DATAFILE\O1_MF_TEMP_%U_.TMP in control file Starting restore at 24-MAR-10 using channel ORA_AUX_DISK_1 creating datafile file number=21 name=+DATA/edbtest/datafile/ramans.285.714403881 channel ORA_AUX_DISK_1: starting datafile backup set restore channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set channel ORA_AUX_DISK_1: restoring datafile 00001 to +DATA channel ORA_AUX_DISK_1: restoring datafile 00003 to +DATA channel ORA_AUX_DISK_1: restoring datafile 00004 to +DATA channel ORA_AUX_DISK_1: restoring datafile 00002 to +DATA channel ORA_AUX_DISK_1: reading from backup piece +FLASH/edbtest/backupset/2010_03_23/nnndn0_tag20100323t120356_0.502.714398639 channel ORA_AUX_DISK_1: piece handle=+FLASH/edbtest/backupset/2010_03_23/nnndn0_tag20100323t120356_0.502.714398639 tag=TAG20100323T120356 channel ORA_AUX_DISK_1: restored backup piece 1 channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:09:15 Finished restore at 24-MAR-10 datafile 1 switched to datafile copy input datafile copy RECID=5 STAMP=714493490 file name=+DATA/tspitr_edbtest_srmk/datafile/system.283.714492973 datafile 2 switched to datafile copy input datafile copy RECID=6 STAMP=714493490 file name=+DATA/tspitr_edbtest_srmk/datafile/sysaux.289.714492949 datafile 3 switched to datafile copy input datafile copy RECID=7 STAMP=714493490 file name=+DATA/tspitr_edbtest_srmk/datafile/undotbs1.287.714492935 datafile 4 switched to datafile copy input datafile copy RECID=8 STAMP=714493491 file name=+DATA/tspitr_edbtest_srmk/datafile/undotbs2.288.714492943 sql statement: alter database datafile 1 online sql statement: alter database datafile 3 online sql statement: alter database datafile 4 online sql statement: alter database datafile 2 online sql statement: alter database datafile 21 online Starting recover at 24-MAR-10 using channel ORA_AUX_DISK_1 channel ORA_AUX_DISK_1: starting incremental datafile backup set restore channel ORA_AUX_DISK_1: specifying datafile(s) to restore from backup set destination for restore of datafile 00001: +DATA/tspitr_edbtest_srmk/datafile/system.283.714492973 destination for restore of datafile 00003: +DATA/tspitr_edbtest_srmk/datafile/undotbs1.287.714492935 destination for restore of datafile 00004: +DATA/tspitr_edbtest_srmk/datafile/undotbs2.288.714492943 destination for restore of datafile 00002: +DATA/tspitr_edbtest_srmk/datafile/sysaux.289.714492949 channel ORA_AUX_DISK_1: reading from backup piece +FLASH/edbtest/backupset/2010_03_23/nnndn1_tag20100323t124021_0.514.714400821 channel ORA_AUX_DISK_1: piece handle=+FLASH/edbtest/backupset/2010_03_23/nnndn1_tag20100323t124021_0.514.714400821 tag=TAG20100323T124021 channel ORA_AUX_DISK_1: restored backup piece 1 channel ORA_AUX_DISK_1: restore complete, elapsed time: 00:00:01 starting media recovery archived log for thread 1 with sequence 316 is already on disk as file +FLASH/edbtest/archivelog/2010_03_23/thread_1_seq_316.734.714405211 archived log for thread 2 with sequence 207 is already on disk as file +FLASH/edbtest/archivelog/2010_03_23/thread_2_seq_207.733.714405211 archived log file name=+FLASH/edbtest/archivelog/2010_03_23/thread_2_seq_207.733.714405211 thread=2 sequence=207 archived log file name=+FLASH/edbtest/archivelog/2010_03_23/thread_1_seq_316.734.714405211 thread=1 sequence=316 media recovery complete, elapsed time: 00:00:02 Finished recover at 24-MAR-10 database opened contents of Memory Script: { # export the tablespaces in the recovery set host 'exp userid = '********' point_in_time_recover=y tablespaces= RAMANS file= tspitr_a.dmp'; # shutdown clone before import shutdown clone immediate # import the tablespaces in the recovery set host 'imp userid = '********' point_in_time_recover=y file=tspitr_a.dmp'; # online/offline the tablespace imported sql "alter tablespace RAMANS online"; sql "alter tablespace RAMANS offline"; # enable autobackups in case user does open resetlogs from RMAN after TSPITR sql 'begin dbms_backup_restore.AutoBackupFlag(TRUE); end;'; # resync catalog after tspitr finished resync catalog; } executing Memory Script Export: Release 11.1.0.7.0 - Production on Wed Mar 24 14:25:51 2010 Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved. EXP-00056: ORACLE error 604 encountered ORA-00604: error occurred at recursive SQL level 3 ORA-04031: unable to allocate 88 bytes of shared memory ("shared pool","select /*+ rule */ bucket_cn...","sql area","opn: qkexrInitOpn") EXP-00000: Export terminated unsuccessfully host command complete Removing automatic instance shutting down automatic instance RMAN-00571: =========================================================== RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS =============== RMAN-00571: =========================================================== RMAN-03002: failure of recover command at 03/24/2010 14:26:09 RMAN-06136: ORACLE error from auxiliary database: ORA-04031: unable to allocate 544 bytes of shared memory ("shared pool","DBMS_BACKUP_RESTORE","PL/SQL DIANA"," PAR.C:parapt:Page") RMAN-03015: error occurred in stored script Memory Script RMAN-06136: ORACLE error from auxiliary database: ORA-04031: unable to allocate 1056 bytes of shared memory ("shared pool","DBMS_BACKUP_RESTORE","PL/SQL DIANA", "PAR.C:parapt:Page") RMAN>
There is always a problem with error ORA-04031 in 32 bit OS. However, it comes to Database 11G, then I would say to let oracle manage the pool rather doing this bu yourself. I would suggect to remove all manually allocation pool and 1 single value memory_target parameter and restart the database. Oracle MSA will take care of the rest.
-
Safe to remove mcf for Oracle Application Adapter Properties?
Hi all
I want to delete properties from mcf in my application adapter Oracle (to connect to a business event), but I can't deploy the process more.
Can anyone help?
Jdev: 10.1.3.4.0.4270
SOA Suite: 10.1.3.4 on AIX 5.3
->
<! - these mcf properties are safe to remove. - >
< jca:address location = "jdbc/fmis' UIConnectionName = 'FMIS" UIOracleAppType = "WFBES" UIWfEventName = "xx.oracle.apps.ap.event.xmlRemit"
ManagedConnectionFactory = "oracle.tip.adapter.apps.AppsManagedConnectionFactory"
MCF. ConnectionString="jdbc:oracle:thin:@server1.test.com.au:1524:B2B1".
MCF. UserName = "apps".
MCF. Password = "7CC4D295E4DDDA919427B6716C0BDD1D" / >
-> to
< jca:address location = "jdbc/fmis' UIConnectionName = 'FMIS" UIOracleAppType = "WFBES" UIWfEventName = "xx.oracle.apps.ap.event.xmlRemit"
ManagedConnectionFactory = "oracle.tip.adapter.apps.AppsManagedConnectionFactory" / > "
-> Error message
BUILD FAILED
C:\projects\eProcurement\PAEBSToB2B\build.XML:78: A problem occurred when connecting to the server "server1.test.com.au" using the '7783' port: bpel_PAEBSToB2B_1.0.jar failed to deploy. Exception message is: ORABPEL-09903
Could not initialize the agent of activation.
An error occurred during initialization of a process enabling agent 'PAEBSToB2B', version "1.0".
Please ensure that the agents of activation are configured correctly in the bpel (bpel.xml) deployment descriptor.
oracle.tip.adapter.fw.agent.jca.JCAActivationAgent: ORABPEL-12517
AdapterFrameworkImpl::endpointActivation - Activation of endpoint error.
Resources adapter Oracle Applications adapter could not activate oracle.tip.adapter.apps.AppsWFBesQueueDequeueActivationSpec endpoint: {OpaqueSchema = false, DatabaseSchema = APPS, QueueName = WF_BPEL_Q, consumer = ORA_6os32h1m84r38di684rj2c1k61, MessageSelectorRule = tab.user_data.event_name = "xx.oracle.apps.ap.event.xmlRemit", AppsEventSchema = NO_SCHEMA} for the following reason: ORABPEL-00000
Error in creating the managed connection pool. Invalid connection Cache name. Must be a valid string and a single
Please correct the reported problem and redeploy the BPEL process.
at com.collaxa.cube.engine.core.BaseCubeProcess.startAllActivationAgents(BaseCubeProcess.java:428)
at com.collaxa.cube.engine.deployment.DeploymentManager.activateDefaultRevision(DeploymentManager.java:1733)
at com.collaxa.cube.engine.deployment.DeploymentManager.setDefaultRevision(DeploymentManager.java:1691)
at com.collaxa.cube.engine.deployment.DeploymentManager.deployProcess(DeploymentManager.java:950)
at com.collaxa.cube.engine.deployment.DeploymentManager.deploySuitcase(DeploymentManager.java:792)
at com.collaxa.cube.ejb.impl.BPELDomainManagerBean.deploySuitcase(BPELDomainManagerBean.java:455)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
at java.lang.reflect.Method.invoke(Method.java:618)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
to com.evermind.server.ejb.interceptor.system.JAASInterceptor$ 1.run(JAASInterceptor.java:31)
at com.evermind.server.ThreadState.runAs(ThreadState.java:693)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at DomainManagerBean_RemoteProxy_4bin6i8.deploySuitcase (unknown Source)
at com.oracle.bpel.client.BPELDomainHandle.deploySuitcase(BPELDomainHandle.java:319)
at com.oracle.bpel.client.BPELDomainHandle.deployProcess(BPELDomainHandle.java:341)
at deployHttpClientProcess. jspService(_deployHttpClientProcess.java:376)
at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
to oracle.security.jazn.oc4j.JAZNFilter$ 1.run(JAZNFilter.java:400)
at java.security.AccessController.doPrivileged(AccessController.java:279)
at javax.security.auth.Subject.doAsPrivileged(Subject.java:727)
at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:871)
at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
to oracle.oc4j.network.ServerSocketReadHandler$ SafeRunnable.run (ServerSocketReadHandler.java:260)
to com.evermind.util.ReleasableResourcePooledExecutor$ MyWorker.run (ReleasableResourcePooledExecutor.java:303)
at java.lang.Thread.run(Thread.java:810)
Total time: 40 seconds
Kind regards
KerrMcf properties should be withdrawn as a best practice, regardless of the environment. Development is probably the environment more important to revome such that it will be this object that gets migrated as part of the lifecycle developmentn. As much as I know I've never seen a dependency on these parameters in JDev, so they can be dismissed at pleasure.
The question in dispute. Looking at your it looks that you have correctly entered your JNDI name in
You specified jdbc/fmis. This seems to be more than one data source name is not a jndi name. I expect to see something like eis/Apps/fmis.
This must be entered in your connection pool.
In EM-> oc4j_soa-> applications-> default-> Apps adapter.
This must match your JDeveloper entry. If you establish as common naming method, it should be no problem with the transfer between the developers code.
see you soon
James -
Hi all!
I set JNDI in ra.xml - oc4j as file:
[xml]
< location connector-factory = "jdbc/SSNDbDS" connector-name = "Adapter database" >
< config-property name = "xADataSourceName" value = "jdbc/SSNDbDS" / >
< config-property name = "dataSourceName" value = "" / >
< config-property name = "platformClassName" value="oracle.toplink.platform.database.Oracle9Platform"/ >
< config-property name = "usesNativeSequencing" value = "true" / >
< config-property name = "sequencePreallocationSize" value = "50" / >
< config-property name = "defaultNChar" value = "false" / >
< config-property name = "usesBatchWriting" value = "false" / >
< connection pooling using 'none' = >
< / connection pooling >
< use security-config 'none' = >
< / security-config >
< / connector-factory >
[xml]
I have two instances on ACE: welcome and SSNProd and ' jdbc/SSNDbDS' is defined in the SSNProd instance while processes are deployed at home. So I copy-pasted pool of connections and definition of SSNProd - sources.xml in-home instance data connection. I thougt it might be the problem but it didn't solve it. The problem I have is: when I try to open a trial with adapter DB with:
[xml]
< service name = "MSRefIDNextVal" >
< name of port = "MSRefIDNextVal_pt" binding = "tns:MSRefIDNextVal_binding" >
<!-your connection TIME is declared in
J2EE_HOME/application-Deployments/default/DbAdapter/OC4J-RA. XML
These properties of mcf here come your design-time connection and
you don't have to change this file, and then restart the application server
If missing jdbc/SSNDbDS.
These properties of mcf are safe to remove.-->
< jca:address location = "jdbc/SSNDbDS.
ManagedConnectionFactory="oracle.tip.adapter.db.DBManagedConnectionFactory"/ >
< / port >
< / service >
[xml]
I get the next exception (I put logger level to debug and here is the log file records):
< 2008-10-27 12:13:02, 264 > < INFO > < default.collaxa.cube.ws > < database Adapter::Outbound > < oracle.tip.adapter.db.TopLinkLogger Journal > connection (DatabaseLogin)
platform = > Oracle9Platform
username = > «»
Connector = > data source name JNDIConnector = > jdbc/SSNDbDS
))
< 2008-10-27 12:13:02, 264 > < ERROR > < default.collaxa.cube.ws > < database Adapter::Outbound > < oracle.tip.adapter.db.DBManagedConnectionFactory acquireSession > cannot generate the TopLink Session
< 2008-10-27 12:13:02, 264 > < DEBUG > < default.collaxa.cube.ws > < database Adapter::Outbound > < oracle.tip.adapter.db.DBManagedConnectionFactory acquireSession > oracle.tip.adapter.db.DBConnectionFactory
< 2008-10-27 12:13:02, 264 > < ERROR > < default.collaxa.cube.ws > < AdapterFramework::Outbound > file:/C:/Oracle/OracleAS/bpel/domains/default/tmp/.bpel_MyNotification_1.0_e83588e1ecab6f4899d99f7f74afd076.tmp/MSRefIDNextVal.wsdl [MSRefIDNextVal_ptt::MSRefIDNextVal(MSRefIDNextValInput_msg,MSRefIDNextValOutputCollection)] - could not invoke operation "MSRefIDNextVal" against the "data adapter" due to:
ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the data store.
See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Caused by java.lang.ClassCastException: oracle.tip.adapter.db.DBConnectionFactory.
at oracle.tip.adapter.db.exceptions.DBResourceException.createEISException(DBResourceException.java:469)
at oracle.tip.adapter.db.exceptions.DBResourceException.couldNotCreateTopLinkSessionException(DBResourceException.java:212)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:642)
at oracle.tip.adapter.db.transaction.DBTransaction.getSession(DBTransaction.java:451)
at oracle.tip.adapter.db.DBConnection.getSession(DBConnection.java:222)
at oracle.tip.adapter.db.DBInteraction.executePureSQL(DBInteraction.java:1053)
at oracle.tip.adapter.db.DBInteraction.execute(DBInteraction.java:239)
at oracle.tip.adapter.fw.wsif.jca.WSIFOperation_JCA.executeRequestResponseOperation(WSIFOperation_JCA.java:485)
at com.collaxa.cube.ws.WSIFInvocationHandler.invoke(WSIFInvocationHandler.java:435)
at com.collaxa.cube.ws.WSInvocationManager.invoke2(WSInvocationManager.java:443)
at com.collaxa.cube.ws.WSInvocationManager.invoke(WSInvocationManager.java:251)
at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__invoke(BPELInvokeWMP.java:727)
at com.collaxa.cube.engine.ext.wmp.BPELInvokeWMP.__executeStatements(BPELInvokeWMP.java:366)
at com.collaxa.cube.engine.ext.wmp.BPELActivityWMP.perform(BPELActivityWMP.java:195)
at com.collaxa.cube.engine.CubeEngine.performActivity(CubeEngine.java:3672)
at com.collaxa.cube.engine.CubeEngine.handleWorkItem(CubeEngine.java:1650)
at com.collaxa.cube.engine.dispatch.message.instance.PerformMessageHandler.handleLocal(PerformMessageHandler.java:75)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleLocalMessage(DispatchHelper.java:184)
at com.collaxa.cube.engine.dispatch.DispatchHelper.sendMemory(DispatchHelper.java:276)
at com.collaxa.cube.engine.CubeEngine.endRequest(CubeEngine.java:5658)
at com.collaxa.cube.engine.CubeEngine.createAndInvoke(CubeEngine.java:1082)
at com.collaxa.cube.engine.delivery.DeliveryService.handleInvoke(DeliveryService.java:535)
at com.collaxa.cube.engine.ejb.impl.CubeDeliveryBean.handleInvoke(CubeDeliveryBean.java:342)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
to com.evermind.server.ejb.interceptor.system.JAASInterceptor$ 1.run(JAASInterceptor.java:31)
at java.security.AccessController.doPrivileged (Native Method)
at javax.security.auth.Subject.doAs(Subject.java:396)
at com.evermind.server.ThreadState.runAs(ThreadState.java:648)
at com.evermind.server.ejb.interceptor.system.JAASInterceptor.invoke(JAASInterceptor.java:34)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.TxRequiredInterceptor.invoke(TxRequiredInterceptor.java:50)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at com.evermind.server.ejb.StatelessSessionEJBObject.OC4J_invokeMethod(StatelessSessionEJBObject.java:87)
at CubeDeliveryBean_LocalProxy_4bin6i8.handleInvoke (unknown Source)
at com.collaxa.cube.engine.dispatch.message.invoke.InvokeInstanceMessageHandler.handle(InvokeInstanceMessageHandler.java:37)
at com.collaxa.cube.engine.dispatch.DispatchHelper.handleMessage(DispatchHelper.java:138)
at com.collaxa.cube.engine.dispatch.BaseScheduledWorker.process(BaseScheduledWorker.java:70)
at com.collaxa.cube.engine.ejb.impl.WorkerBean.onMessage(WorkerBean.java:86)
at sun.reflect.GeneratedMethodAccessor93.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at com.evermind.server.ejb.interceptor.joinpoint.EJBJoinPointImpl.invoke(EJBJoinPointImpl.java:35)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.DMSInterceptor.invoke(DMSInterceptor.java:52)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.interceptor.system.SetContextActionInterceptor.invoke(SetContextActionInterceptor.java:44)
at com.evermind.server.ejb.interceptor.InvocationContextImpl.proceed(InvocationContextImpl.java:119)
at com.evermind.server.ejb.InvocationContextPool.invoke(InvocationContextPool.java:55)
at oracle.j2ee.connector.messageinflow.MessageEndpointImpl.OC4J_invokeMethod(MessageEndpointImpl.java:297)
at WorkerBean_EndPointProxy_4bin6i8.onMessage (unknown Source)
at oracle.j2ee.ra.jms.generic.WorkConsumer.run(WorkConsumer.java:268)
at oracle.j2ee.connector.work.WorkWrapper.runTargetWork(WorkWrapper.java:242)
at oracle.j2ee.connector.work.WorkWrapper.doWork(WorkWrapper.java:215)
at oracle.j2ee.connector.work.WorkWrapper.run(WorkWrapper.java:190)
to EDU.oswego.cs.dl.util.concurrent.PooledExecutor$ Worker.run (PooledExecutor.java:814)
at java.lang.Thread.run(Thread.java:595)
Caused by: java.lang.ClassCastException: oracle.tip.adapter.db.DBConnectionFactory
at oracle.toplink.jndi.JNDIConnector.connect(JNDIConnector.java:94)
at oracle.toplink.sessions.DatasourceLogin.connectToDatasource(DatasourceLogin.java:147)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:228)
at oracle.toplink.internal.databaseaccess.DatabaseAccessor.connect(DatabaseAccessor.java:220)
at oracle.toplink.internal.databaseaccess.DatasourceAccessor.connect(DatasourceAccessor.java:304)
at oracle.toplink.threetier.ConnectionPool.buildConnection(ConnectionPool.java:82)
at oracle.toplink.threetier.ExternalConnectionPool.startUp(ExternalConnectionPool.java:98)
at oracle.toplink.threetier.ServerSession.connect(ServerSession.java:435)
at oracle.toplink.publicinterface.DatabaseSession.login(DatabaseSession.java:504)
at oracle.tip.adapter.db.DBManagedConnectionFactory.createServerSession(DBManagedConnectionFactory.java:1019)
at oracle.tip.adapter.db.DBManagedConnectionFactory.acquireSession(DBManagedConnectionFactory.java:408)
... more than 63
< 2008-10-27 12:13:02, 264 > < ERROR > < default.collaxa.cube.ws > < AdapterFramework::Outbound > file:/C:/Oracle/OracleAS/bpel/domains/default/tmp/.bpel_MyNotification_1.0_e83588e1ecab6f4899d99f7f74afd076.tmp/MSRefIDNextVal.wsdl [MSRefIDNextVal_ptt::MSRefIDNextVal (MSRefIDNextValInput_msg, MSRefIDNextValOutputCollection)] - backward JCA LocalTransaction
< 2008-10-27 12:13:02, 264 > < DEBUG > < default.collaxa.cube.ws > < AdapterFramework::Outbound > WSIFCache: closing the connection of CCI
< 2008-10-27 12:13:02, 264 > < DEBUG > < default.collaxa.cube.ws > < WSIFInvocationHandler::invoke > fault has happened: file:/C:/Oracle/OracleAS/bpel/domains/default/tmp/.bpel_MyNotification_1.0_e83588e1ecab6f4899d99f7f74afd076.tmp/MSRefIDNextVal.wsdl [MSRefIDNextVal_ptt::MSRefIDNextVal (MSRefIDNextValInput_msg, MSRefIDNextValOutputCollection)] - SISM JCA Execute of 'MSRefIDNextVal' failed due to the operation: could not create/access the TopLink Session.
This session is used to connect to the data store.
; nested exception is:
ORABPEL-11622
Could not create/access the TopLink Session.
This session is used to connect to the data store.
See the first exception for the specific exception. You may need to configure the connection settings in the deployment descriptor (i.e. $J2EE_HOME/application-deployments/default/DbAdapter/oc4j-ra.xml), and then restart the server. Caused by java.lang.ClassCastException: oracle.tip.adapter.db.DBConnectionFactory.
Anyone know the problem. Retail oracle.tip.adapter.db.DBConnectionFactory tells me a lot, maybe java.lang.ClassCastException production tell someone my error?
The connection and the connection pool are defined in the data source as:
[xml]
"< data source managed connection-pool-name="jdev-connection-pool-SSNDb ' jndi name = "jdbc/SSNDbDS" name = "jdev-connection-managed-SSNDb" / >
< connection-pool name = "jdev-connection-pool-SSNDb" >
< connection-factory factory-class = "oracle.jdbc.pool.OracleDataSource" user = "< password >" password = '< base >' url = "< MY_URL >" / >
< / connection pool >
[xml]
Thank you
Kind regards!
BBYou use a XAdatasource, is it necessary? Try:
Marc
http://orasoa.blogspot.com -
Change the IP for UCS management pool
Hi all
We try to change / less the size of the property held by the pool for blades UCS KVM management.
Some IP addresses are assigned to the existing blades, pourrais I delete existing IP pools directly and create the new compact block for managing KVM?
If I like the above, I know I'll lose KVM on the blades.
In addition, what is the impact? The trafffic server will be interrupted or blades restart?
Thank you very much!
Best regards
No harmful impact other than to lose access MMIC for awhile (kvm, virtual media, IPMI etc.). Blade will not restart you. It's strictly a connection out-of-band management.
Create your new pool, then zap your old. The blades will be immediately wish through the other pool for an available IP address.
Kind regards
Robert
-
Hello
I am trying to identify the point of failure in communication between a pool of related clones and the view connection server - which prevents the management console to see if-and-who is connected to a particular linked clone VM.
He showed the status of 'User' correctly in the past, but after several re-compositions and to implement a McAfee Firewall required on the connection server, composer and each Linked-Clone - it stopped. Windows Firewall is disabled machines.
I spent some time already tuning firewall McAfee to enable all required traffic and services and everything works - it seems fair that he is unable to take inventory on the linked clones with regard to if someone is logged in one.
I suppose that the Agent view handles make this info on the login server, but I can't seem to identify the communication which is apparently filtered, when everything else seems to work in the infrastructure of the view.
I'm testing with the firewall turned off to see if I can get it working again.
I have attached a perforated Cap where is the problem.
Thanks in advance,
Corey
It may be a stretch but check the Userinit registry key located at HKLM\Software\Microsoft\Windows NT\CurrentVersion\Winlogin. You want to ensure that C:\Program VMware View\Agent\bin\wssm.exe is specified in this key as will facilitate the session/user information to the broker for the connections once connected.
-
Floating pool, the persona management, printer by default do not forget
I deployed a small floating pool view 5.0 with management Persona has helped a few users, so far, everything seems to work very well.
The only exception is the default printers, look to the top of the printer in the Directory network, adds to their VM and affects as their default printer. Will use this VM all day with no problems, but when they disconnect and reconnect the next day, the default printer is not known.
Printers are added, just the default printer is not fair. It comes down to the "Microsoft XPS Writer".
Any suggestions on how to fix this?
Thanks in advance!
-Michael
Sorry for not updated this thread a long time ago. I could solve this problem by using a .vbs script connecting to add printers to network and then set them as default.
I just posted more details about this on my blog today:http://miketabor.com/set-default-printer-view-floating-desktop-persona-management/
Hope this helps someone else!
-
Hi team,
I m error when i m to access the Manager version alb 3. "expired.the timeout period elapsed prior to obtaining a connection from the pool.this have bcz grouped all connection used and maximum pool size has been reached.
Please provide the solution.
Concerning
Ajay
Discussion moved from the Knowledge Base of VMware Lab Manager
Maybe you are looking for
-
My locks of Apple Watch every time that the screen turns off.
From the past week, whenever my screen goes black on the Apple Watch, it crashes. Whenever I want to check messages, use siri or do anything outside the eye at the moment, so I have to unlock it with my access code. It's pretty boring.
-
How to implement point filters fixed for FPGA
Hello! I am applying the bandpass filter Butterworth for FPGA. I managed to develop filters of fixed point that suits my needs, but I don't know how to implement on a table in a project after the FPGA code generation. I tried to understand it in the
-
I recently bought a hp mini computer on ebay. It is fully functional and I went to change the administrator and the password in order to connect without password and user. I cancelled the user current password & logon requirement and close. When I
-
Hello, I wanted to download a version BB10 of a portal provider WebWorks app, but I've always had the File bundle (blabla.bar) was rejected. Package ID is required for all .bar file. If this is an upgrade, ID of Package must match ID of Package in th
-
The UCS B200 M3 does support Windows 2003?
For compatibility with older existing software, I would know what (assuming that Microsoft extended until 2015 Support contract) Kind regards Geert