Management remote WAG120N + DDNS problem

Similar Questions

• Add Server 2012 R2 Server Manager servers dialog box problem

  I have a problem in 2012 R2 Server when you add a remote server to all server management interface.   Using the dialog box add servers to add a workgroup server (no configured DNS server), I added the problem of server using the IP address.  A dialog box appears that says "can't resolve host would you like to add it anyway?  For awhile do this, I clicked 'No', but finally clicked on Yes and the server by its server name has been added.

  However, I can not access this server remotely, make sure that it is in the list of approved first hosts.  I have the correct IP addresses and have firewall advances for troubleshooting I can connect on the server locally with an administrator account.

  Removing the server from the remote management console, and then add that it does not solve the problem as server name solves always in the dialog add a server with the credentials apparently wrong.  It is the only server of four that I made this mistake, the other three work great after choosing 'Yes' to add the server non - solve anyway.

  My question is, how do I clear the credentials of server 'broken' out of the 'Add Server' dialog box to the server properly.  The added server is another Server R2 2012.  I changed server names and addresses IP, but the dialog box always detects the server with the new information and still not will not properly add it to Manager remotely.

  And the idea of how to do to erase the old credentials?

  Thanks in advance.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  iOS block report because of the third-party application, I answered and they managed remotely on the computer, now I know it's a scam, I turned off and reset the password, I'm in the clear?

  If you allowed anyone remote access to your computer (and you're talking about a computer since you mentioned iOS which is the OS for iDevices; computers run on Mac OS X), while no one knows what they were able to install. Assume the worst and:

  Notify your credit card company / bank of potential fraud

  Change your bank accounts and report your fly/fraud credit card

  Change all of your passwords

  And, finally, erase your entire hard drive and reinstall the OS from scratch using recovery or your original installation disks.

• can I manage remote NIVLM?

  I've been running NI VLM on my laptop to issue licenses to a mixture of users of LabView and CVI.  Works fine when I'm at the office, not so great when I am traveling, or I turned off the license server, because it takes too much of my CPU resources).    I would like to move this to a 'real' server - but my COMPUTER service don't give me a remote connection to this server.    This would mean that one of them chasing every time that I needed to add/remove a user, etc..., it's why I'm doing this from my laptop.

  VLM yet does Managing remotely?

  Kevin

  Hey Kevin,

  I don't know what you mean by TeleManagement. VLM is on a computer server, then the server machine should be consulted to configure VLM. If this is physically impossible, this will be done via the connection remotely.

  Looks like you would be more useful to use disconnected licenses for your users. Disonnected licenses allow users to access software without pointing to the server Volume License. In this way, you should not run VLM, unless you add your licenses or edition users.

  To put this in:

  1. open VLM and navigate to your users

  2. in VLM 3.0, select users and select cut in the left menu. VLM 2.1.1 right-click the user and select Disconnect.

  3. This will generate a license file that you distribute to your users. Your users will open License Manager on the computers of their clients and go to Options-> license file install and install the disconnected license, that you have given them. They can then take their computers on the network and will not be affected when you stop the MVL or take your machine on the network.

  Please report if you have any other questions. Good luck and have a great day!

  Kind regards

  Jackie

• Unable to connect: Remote Desktop control problem

  Original title: remote desktop control problem

  Hello, I am based in Bulgaria and I am trying to connect to the computer of a friend who is in the United Kingdom. He provide me with all the PC name, user name, and password information. I've tried almost everything I find in your site and the forum but still cannot connect and he can't understand where is the problem. I'll be more than happy if you could help me with this Russia.

  Kind regards

  Ivan Karchev

  Hello

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• Remote Desktop having problems connecting Surface RT to Win 8 portable Pro (new installation)

  Remote Desktop/RemoteApp problems

  I was not able to connect outside of the network.

  I sprung several days trying to solve this problem by myself, then on the phone with Microsoft productivity, and some of them aren't yet familiar with Surface RT. So with the RD in network connection is quite simple and effective, I hope some people here can confirm that they have the same problems or possible solutions.

  As I see it, there are 3 interfaces where we can connect to RD on the Surface RT: Pre-installe Remote Desktop Office found via scanning and research, the metro downloadable RemoteApp and desktop remotely via the control panel).

  I see where ping command is executed on the computer and port 3389 is open and oriented to the laptop, so I will state the problems I see with each when I try to log on a Windows 8:

  (1) pre-installed RD:
  

  It's great and the name of your computer is there for you and connected to your account and network ready. You have options like "Connect and don't warn me if server authentication fails" I think has helped many people on Windows Server with certificate problems.

  Off-grid on Surface RT, however, you get «Remote desktop cannot find the computer _.» This may mean that '_' does not belong to the specified network. Check the computer name and the domain you are trying to connect to."

  (2) metro UI:

  
  

  It seems to do a ping the computer more quickly when you put: 3389 at the end of your IP address. However, no success after having tried with and without the end of the port. The messages I get are...

  RemoteApp 3):

  

  This is the solution I've seen in most tutorials,... but the reason given for not connecting, it is "the remote computer cannot be authenticated due to problems with its security certificate."

  Instead of the option to bypass (which option 1 gives you), there is no other choice, and he says "Windows is unable to continue setting up this connection. Contact the administrator of your workplace. »

  This message made me to learn more about the certificates that I always wanted to know. I tried to start MMC and ensuring that the cert listed in Remote Desktop has been copied to the folders of the confidence of the authorities certificate root (duplex as certificates on the local computer). I tried different combinations and did not really anywhere.

  If someone connects via #3, please post care on your certificate if you can find it.

  Any help on getting one of these methods to work is appreciated. It puts naked repeat that port 3389 is listed as open on my home network, the traffic is transferred to the correct PC and all firewalls are disabled until I can solve this problem.

  Hello

  Sorry for the delay in responding.

  Assistance in connection with Remote Desktop problems are handled by technicians of the TechNet Forums.

  If you are also facing problems with remote desktop on the computer Windows 7, then please post your question in the Windows 7 IT Pro TechNet Forums: http://social.technet.microsoft.com/Forums/windows/en-US/home?category=w7itpro

  Thank you.

• Connection Manager 210 HP Mini problem

  Hello. I recently installed Windows XP on my hp mini 210-1000ew. Then I installed the drivers essentials and programs, but whenever I try to open the HP connection manager, I get the following message: "HP Connection Manager has encountered a problem and needs to close. We are sorry for the inconvenience ". Is it possible to fix it?

  Hello

  Uninstall your HP Connection Manager System.

  Resources:

  How to change or remove a program in Windows XP

  First install Microsoft .NET 3.5 Service Pack 1 (SP1) .

  When you do this reinstall HP Connection Manager.

• tangosol. Coherence.Management.Remote

  Oracle Version consistency 3.6.1.3 Build 23410
  Enterprise Edition: Mode of Production
  
  I'm under a node cache with tangosol.coherence.management.remote = true and tangosol.coherence.management = all properties.
  
  In fact, in the gc of the cache node logs, I see a full GC (System), which runs hourly. The following link gave me an idea that the implementation of the RMI to the Sun (now Oracle) forces a gc every one hour.
  
  http://docs.Oracle.com/javase/6/docs/TechNotes/guides/RMI/sunrmiproperties.html
  
  That's why I wonder if it properties will start server RMI? If so, what are the registryport and the connectionPort used to RMIConnector. I am unable to connect using the default ports of Jconsole.
  
  Concerning
  
  Published by: user7665475 on January 25, 2012 14:09
  
  Published by: user7665475 on January 27, 2012 07:27

  Hi Ali,

  Setting the property com.sun.management.jmxremote records instrumentation JVM MBeans and publishes the RMI connector via a private interface to allow applications to monitor a local JVM running on the same client machine JMX.

  The JMX agent uses a transient local port, unless you specify the following property:
  com Sun.Management.jmxremote.port = portnum

  Default ports are avoided because you have a lot of java applications on a system, and if there's a default port, that an application would be able to manage. The above configuration property is provided for the express purpose of Managing remotely.

  Therefore, there is no default ports and AFAIU, 3000 and 9000 are for example purposes.

  I hope this helps!

  See you soon,.
  NJ

• Device Manager remotely using Compmgmt.msc Cannot Connect to Vista Edition family of XP

  Whenever I run (compmgmt.msc) computer management I connect the remote computer to Vista Home.  I connect successfully to him but whenever I select the Device Manager it says: "cannot access the computer 'Computer name'." "Or whenever I select the folder to share, I get" error 5: access is denied. " "What seems to be the problem?

  Hello

  Sorry, when I saw the 'I' connect I does not pay attention to the expression "Vista Home".

  The Home of Windows versions may not act as a host to remote control.

  You must upgrade to a version of Windows Pro/Ultimate/Enterprise.

  Or use this, http://www.teamviewer.com/index.aspx

  Or, http://www.uvnc.com/

  Both are free for personal use.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• HP T510 - remove DESKTOP connections the connection with the HP Device Manager Manager remotely

  I can manage, deploy, and send registry updated successfully to all HP T510 customers on my network via HPDM.

  When deploying a RDP connection is successful, but it added the new connection in the connection list.

  I was assuming that other connections would be withdrawn when the deployment of a record of a customer with the correct setting - but the new connection is just added to the existing list of RDP connections and I need to delete the other.

  Please could someone advise me how to remove DESKTOP connections remote connection using HPDM Manager screen.

  I found it! the option delete isn't available when deploying new connections - it's a checkbox at the bottom of the wizard

• Energy management G580 causing wireless problem

  So first, I apologize if this post is in the wrong place. I saw nowhere g580s.

  I've narrowed my problems wireless for the Power Manager (I think).

  If the laptop is connected to AC wireless connects fine. If running on battery then it does not connect unless the energy management is set to 'performance' instead of the default "balanced."

  I'm on win8 and tried 8.0.2.5, 8.0.2.3 power management version and the latest version for win7 all with the same result.

  I unchecked the box in to the wireless network card device manager to "allow the computer to turn ff this device save energy."

  I just bought this laptop yesterday and it would be great if someone knew what I was dominant.

  Thanks in advance!

  Hi Artificialed,

  Thanks for posting back. Soha is correct. Usually this could be the cause of her managent Lenovo Energy I join n you can also try to check the power of window options. some setting it might have changed.

  To do this, please follow the steps below.

  > Go to 'control panel '.
  > Click on "Power Options."
  > Click "Change settings Plan" (located on the right)
  > Click "Change advanced settings" (located below on the left)
  > A new window should appear and find "Wireless Adapter" > "power save mode".
  > Change the settings "on battery" and "Trendy" to Maximum performance.

  Hope this helps and do post back with your results.

  Concerning

• the Task Manager and closing of problems

  This week my computer (vista) has begun does not as it should be-two things:

  1. I can't open the Task Manager. When I try to open it, I get a small green icon in the lower right and that's all.

  2. when I click to shut down my computer, it goes to the "closure" of the screen image, with the circle of rotation timer and just gets stuck there.

  I did a search of viruses with this microsoft security scanner, which I did when reading the pages of help on Manager tasks said I may have a virus. This analysis, I've done was told that no virus, spyware, etc. were found.

  The only other thing I can think to do a defrag, for a general order is in place. What can I do? Any suggestions?

  Hello

  1. you remember to make changes to your computer before the problem?

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Start your computer in safe mode and check if the problem persists.
  
  Step 2:

  If it works fine in safe mode, then there could be a third-party software, causing the issue to occur. I wish that you start your machine in a clean boot State. Clean boot helps eliminate conflicts of third party software.

  Note: Follow step 7 to your computer as usual.

  Step 3:

  Also perform the SFC scan to check whether the problem is related to the integrity of system files.

• That mysterious when Remote Desktop connectivity problem via WiFi...

  Able to properly connect and connect to the remote computer from any network with my laptop and Ethernet cable router, but the WiFi connection that is possible only if both devices are on the same network - why?

  I suspect, it takes a kind of conditional configuration problem, in which some how its discriminant only WiFi connection outside its network, but not Ethernet-hug interesting (well, at least for me, it is).

  Thank you, Jerry

  Hello

  Yes, it is possible that when the two computers are on the same network, for more information, see this link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  It will be useful.

• Remote support - message "problem can happen...". »

  Windows remote assistance is allowed through the firewall.  When I try to save the invitation file on my machine or send an invitation I get the message "is a problem that could cause the RA to work.  Try again or contact your system administrator. "Single machine with admin rights.  Tried too many times.

  Thank you in advance.

  Brad

  [Moved from IE9 forums]

  Hello

  Thanks for the reply.

  You can try to create a new user account and see if you get the same error prompt in the new user account as well. To create a user account follow this link:

  Create the user account

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-7

  If this does not help then, refer to the suggestions of Magon Liu dated Wednesday, March 9, 2011 08:16
  http://social.technet.Microsoft.com/forums/en-us/b1d4f4d5-8a86-4482-9fd4-335eb2f68362/various-problems-with-remote-assistance

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  Registry backup
  http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

  I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.

  Thank you

• Manager remote desktop services / Terminal Server Services Manager

  I've upgraded to Windows 7 Enterprise to Windows XP SP3. I'm used to use the "reset" Terminal Services Manager a 'Down' RDP - TCP or ICA - TCP port. In remote desktop Services Manager, the ability to 'Reset' a 'Down' port is "grayed out". I can't "Reset" of the port. I checked in Windows features and parts under Remote Server administrative tools have been checked. I don't want to create another port. I want to 'Reset' current 'Down' port. I'm a little frustrated that I have to connect to a XP workstation to get this accomplished. Am I missing something? Something is not properly configured? Do I need to install an additional application?

  >"... Any other suggestions? "

  Hey, welcome back.

  Please, go to: Microsoft Support - "XP and Windows Windows Server 2003 servers are not advertised as Terminal Services" at http://support.microsoft.com/kb/281307 and to have your better question, go to the TechNet Forums of MS and place your question here for not more at:http://social.technet.microsoft.com/Forums/en-us/categories.

  Best regards.

  itconcerned