HP T510 - remove DESKTOP connections the connection with the HP Device Manager Manager remotely

Similar Questions

• Vista not recognize / connect with any Bluetooth device

  Vista not recognize / connect with any Bluetooth device. I have the Bluetooth dongle into a good usb port, the computer recognizes it, but it doesn't show up

  Bluetooth devices when the device will attempt to connect.

  Is that what you would please stand out my answer as the answer to your problem.

  Marked as answer questions don't get a lot of people looking at them.

  Sorry that he had not helped you.

  Once you disable the my answer option, others will look at your problem and we hope to help you.

  See you soon.

• Director of office of blackBerry Smartphones no connection BB recognition despite Device Manager recognizing the BB!

  I'm turning crazy connection.

  I installed desktop manager 4.6 provided on the CD, as the user guide says. I connected the cable between my BB 8220 pearl.

  The BB asks me if I want to turn Mode mass storage and I clicked 'YES '.

  Explorer Windows allows me to view the contents of the phone.

  BB Device Manager tells me that "" USB - PIN: xxxx is connected ".

  YET in the Desktop Manager software on the upper left corner, it says 'Disconnect' and on the lower left corner, it says: "Device Connected (PIN): No.

  Does anyone know why the BB device manager says the BB is connected by software office says the opposite?

  I have tried everything to uninstall for re - install desktop Manager and also pass the phone power on and off.

  Help, please! Someone!

  Hi and welcome to the Forums!

  See this KB for assistance troubleshooting:

  • KB02640 Troubleshooting USB connections
    KB15486 Top 10 smartphone BlackBerry and BlackBerry Desktop Manager troubleshooting tips
    KB00019 PIN code not displayed in BlackBerry Desktop Redirector

  I hope that something will be useful.

• The device icon and text missing in the imaging devices Manager

  The device icon and text missing in the imaging devices Manager

  I'm running MS Vista Ultimate.

  The imaging device icon and the wording are missing in Device Manager are missing. A device is listed in the box as installed missing icon.

  The other devices in Device Manager normally appear and I can compare what is supposed to be there for another computer running the same version of windows.

  However, the device will not work and will not reinstall.

  When you try to reinstall the device an error indicates that Setup does not work and to contact the manufacturer of the device.

  Yet once, however, this happens when I try to install any imaging device.

  I'm unable to locate information about the imaging devices in the registry.

  I think that some registry entries are missing.

  It is not the missing peripheral individual. This is the section in Device Manager.

  The image error is logged:

  "Windows didn't load setup." Contact your hardware vendor. »

  This happens with any device inaging of anyone.

  Hi henrymullersr

  What imaging device do you use?

  We can try a few steps and check if it helps you.

  Try to run the hardware and devices Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Hardware-and-Devices-troubleshooter

  If the result of the Troubleshoot utility is negative, then reinstall the device. And also be sure to uninstall the previous contents of the device driver by running utility windows install cleanup:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Now follow the following steps:

  1. Save the Windows Installer Cleanup Utility package on your computer

  2. right click on the Windows Installer Cleanup Utility and run as administrator

  3. follow you prompt in the installation wizard. Once completed the installation, click on the Start button

  4. click on all programs. Click on Windows Install CleanUp Utility.

  5. click on the device driver (if on list) in the list of programs.

  6. click on Remove. Click OK

  7. click exit

  Restart the computer for the changes to take effect
   
  Then try to install the device driver and check the result: http://windows.microsoft.com/en-US/windows-vista/Install-a-USB-device

  After back and let us know if it helped to solve your problem.

  Thank you and best regards,

  R uma - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Installation of construction LabVIEW application disables the Windows Device Manager? Help on how to diagnose the problem?

  Please can anyone shed light on this, or suggest where to look?

  I built an application using the Application Builder of LV2014 (32 bit).

  On a Win7 X 64 PC at work, it installs and runs ok.

  On Win7 X 64 PC at the customer, it installs ok, but then after Windows restarts on demand 'device manager' no longer works and there are some unchangeable registry entries associated with nipalu. The client runs Symantec security software. A client COMPUTER technician is suggesting that LabVIEW is interacting with device drivers and this is the origin of the problem, but we do not know how to go further. It is not really acceptable to deploy computers where the Windows Device Manager no longer works. Surprisingly, the application itself works always - it's just Windows which messed up.

  Thank you

  Thanks for the suggestions. The company IT guy has not been able to talk to a person in NI UK support (no one was available), but he managed to keep it down to a problem with Dell Data Protection encryption Enterprise Edition. Delete first, then install the LabVIEW application, then reinsert DDPE gave a system where everything worked.

  We have built apps that used progressively more labview drivers (vision, labview base; digital i/o)

• How to set the parameters of "Configuration ThinPro" via the HP Device Manager

  Hello

  Maybe I'm blind, but how can I set the settings in "Setup ThinPro', accessible from

  ThinPro Control Center-->

  Control Panel-->

  Setup-->

  Configuration ThinPro

  through the HP Device Manager? These parameters allows to use a very strict kiosk mode, which we want to deploy. So far I found just to solve this problem through a complete picture, but this isn't a solution for me.

  I hope that I have forget something or you have another clue.

  Concerning

  Looks like there is no direct way via the HP Device Manager. Now, I manually configure a thin Client and save the registry.xml that I can ride with other devices.

  Concerning

• Sony z3 appearing is not in the google Device Manager

  Sony z3 appearing is not in the google Device Manager

  I checked the security rating...

  even with my new Tablet sony z3.

  Strange thing. Are you ready to try the fix? Do it with CCP if you want:

  http://www.sonymobile.com/GB/tools/PC-companion/

• Intel(r) management Engine Interface cannot start (code 10), I get this message whem check the computer Device Manager

  I get this message whem check the computer Device Manager

  Intel(r) management Engine Interface cannot start (code 10)

  Thanks Ephraim

  Please provide us with your administrative Event Viewer logs by following these steps:

  Click on Start Menu
  Type eventvwr in the find programs and files (do not hit enter)
  Click with the right button on eventvwr.exe and click Run as administrator
  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download .zip here (if you can) to skydrive or a file sharing service

• Configure button disabled on the playback device, manage audio devices. How can I reactivate the button Configure?

  Hi, following an automatic update of Windows Vista 64-bit I have no sound. Thank you for that.   I had a similar problem before, the sound quality has been reduced to a rate lower than 16 bit 44.1 k.  I've changed this before clicking on the button configure on the playback device, manage audio devices.  But now, this button is disabled and I can't check the set up or make changes.  I am logged in as an administrator user, how to re - activate the button set up?

  Thank you

  Darren

  Hello, I have stopped the Windows Audio Service and rebooted a couple of times.  Now I have his back.

  Thank you

• A Wi - Fi (Wireless LAN) connection is disabled in Device Manager

  The laptop is HP Pavilion G4 running Windows 7 Ultimate (64 bit).

  I just re - install my laptop Windows 7 Home Premium (64-bit) for Windows 7 Ultimate (64 bit).

  But I just realized that there is no "HP Connection Manager", so I downloaded it from the internet.

  When I turned on the wifi of "HP Connection Manager", he says "Wi - Fi (Wireless LAN) is disabled by the Device Manager".

  What should I do next?

  Thank you!

  Hello:

  You will probably need to install the driver for the wireless card there.

  If you see a device network controller listed in the Manager of devices, then you certainly need to install the driver for the wireless card model that your laptop uses wireless.

• Device Manager remotely using Compmgmt.msc Cannot Connect to Vista Edition family of XP

  Whenever I run (compmgmt.msc) computer management I connect the remote computer to Vista Home.  I connect successfully to him but whenever I select the Device Manager it says: "cannot access the computer 'Computer name'." "Or whenever I select the folder to share, I get" error 5: access is denied. " "What seems to be the problem?

  Hello

  Sorry, when I saw the 'I' connect I does not pay attention to the expression "Vista Home".

  The Home of Windows versions may not act as a host to remote control.

  You must upgrade to a version of Windows Pro/Ultimate/Enterprise.

  Or use this, http://www.teamviewer.com/index.aspx

  Or, http://www.uvnc.com/

  Both are free for personal use.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• keep the photos in icloud, but remove them from the iOS device?

  Hi, need help to keep my old photos in the cloud, then to remove them from my iphone device. I can also keep on my mac but still once, how can I make sure that when I delete from my iphone I can still access them in the cloud or on my big Mac? My phone is getting to the maximum it can hold up to now need to move them to a storage for later viewing device, editing or other.

  Thank you

  You cannot store pictures on iCloud and remove them from your device. Remove them on the phone also icloud removes them. You can set for storage optimized on your device that compresses the resolution of the device stored photos, keep the originals in iCloud.

  If you want to be able to todelete pictures from your phone and store them elsewhere, you must use subscription such as Dropbox cloud storage or store them on your computer.

  iOS: import personal pictures and videos of iOS devices to your computer

• Internet connection Windows xp missing device manager local of system restore won't work

  I have a toshiba 2405-s201 laptop that was running sp2, I tried to download sp3 after awhile, he stated that he could not install. now, my local internet is missing device manager is empty system restore will not work, I did a complete search of the file and he saw there. I tried to go to add/remove and said he could not be found. How can I fix it? Oh Yes by the way I am not very computer

  Hello

  You can try to arrange for a Windows XP disk that corresponds to the same edition, as it is installed on your computer. Thereafter, follow these methods & check if the problem persists.

  Reference: How to replace Microsoft or hardware, packs software service to order and replace product manuals?

  Hope the helps of information.

• Satellite 1100 - DVD disc in the missing device manager

  My DVD Rom drive seems to have disappeared from my device manager. System will not read or write any DVD/CD.

  How to restore the disc without using the recovery disk? (That won't work because the drive does not work)

  Hello

  First of all, you should check if the BIOS can recognize the CD/DVD drive.
  If the BIOS does not recognize the drive maybe the pin connection is loose or the disk is damaged.
  If you have experience in laptop computers, you can check the connection of the PIN. Try to remove the disc and then start Notepad. After close connect the player again in the Bay and start the unit.

  Check again if the drive appears in Device Manager. If he doesn t appear I guess that it s a hardware malfunction, and you need a new.

• HP Photosmart C4580 all-in-One: the hp Device Manager

  I recently moved and wireless printing is no longer available, because I have a new router, etc. I'm trying to go through the steps to get my printer to print wireless again. I started with the (difficult to understand) online books and forums, but I encountered a problem.

  A step now asks me to open on my Mac HP Device Manager, but I do not have this program. I guess that it has deleted along the way. Where can I download to continue to implement the capabilities of my wifi printer?

  Thank you!

  Hello @joyandlady,

  Welcome to the Forums of HP Support!

  I would like to help you today with the configuration of your HP Photosmart C4580 all-in-One printer to print wirelessly with your computer Mac OS X 10.7. The Device Manager is a feature of the Windows operating system. I don't know why you got a quick for you going into the Device Manager, but it is not possible for your Mac operating system. Now, because of the age of your unit HP Photosmart there is no downloadable HP full feature software or driver for your printer in Mac OS X 10.7. Therefore, you rely on an update from Apple to install printing and scanning of the capabilities of your printer on your Mac. For this reason, you are not able to perform normal wireless setup wireless for your printer configuration is done via the installation package. For this reason, we have two options.

  Option 1: Install the printer on a supported operating system and run the wireless installation. Once the wireless feature is successfully configured you simply (+) add your printer to your Mac OS X 10.7 for printing and scanning.

  Your printer has a pilot full of features in favor:

  • Mac OS X 10.4
  • Mac OS X 10.5
  • Mac OS X 10.6
  • Windows XP
  • Windows Vista
  • Windows 7
  • Windows 8
  • Windows 8.1

  These operating systems listed will allow you to easily configure the feature wireless on your printer.

  Option 2: Run an Ad Hoc of the wireless installation. This can be a bit difficult. To set up your printer through the Ad-Hoc connection, please follow the steps below.

  1. Let's start by you information computers Mac network gathering because we will need shortly. Go to the Apple and select System Preferences

  2. Select the network

  3. when the network window opens, choose Airport (or Wifi) on the left side:

  

  4. click on the button "Advanced" at the bottom on the left.

  5. Select the TCP/IP tab at the top

  6. take note of the IP address of your computer that we need to reference later

  7 enter your subnet mask and the numbers of your router (default gateway) , because we have also to those too:

  

  8. close the network window.

  9. click on the icon Wireless at the top of your Mac on the right side:

  

  10. connect to the network that appears with your HP C4580 inside.

  11. on your printer wireless light should go solid after a few minutes. At this point, you want to print a Network Configuration report.
  

  Print a Network Configuration report using the button Wireless on the product, press the grey button until print a Network Configuration Page is highlighted, and then press the Green button. A Configuration page prints, including the IP address you need to the next step.

  12. the Network Configuration report new take the new IP address 169.254.xxx.xxx and open your Internet browser.

  13. your Internet browser will not load a real Web site, because you are not on the Internet right now:

  

  14 take your new 169.254.xxx.xxx IP address and enter it in the address bar of web page anyway and go to this site. Do not include the www.

  15. click on the Networking at the top tab:

  

  16. Select connection on the left hand side

  17 select Wireless at the top and then Advanced:

  

  18 type your SSID (your home or business Internet network name)

  19 select Infrastructure

  20 choose your encryption. He will already be WEP or WPA (you may need to ask your internet provider if you don't know what yours is)

  21 type your network (password/password) in the field below WPA or WEP key, one that corresponds to your type of encryption that is given to you by your internet provider.

  22. click on apply bottom-right:

  

  23. on your Mac , click the Wireless at the top:

  

  24. reconnect to your normal Internet

  25. go to Apple - System Preferences - select print and scan

  26. click on the Plus (+) button to add your printer Hello

  Now that your wireless printer is added, please test printing.

  Please reply to this message with the result of your troubleshooting. If you prefer to run the installation Wireless under an operating system that is supported, please let me know which operating system you use, and I can guide you through these steps. Good luck!