Similar Questions

• Management Studio Express 2008 R2 installation destroyed Windows

  I installed the application above, it worked absolutely fine until I rebooted. Then chaos ensues. I had absolutely no idea of installing an application Microsoft could cause so much damage.

  After installing that I am unable to boot in a mode any, if I try safe mode, it hangs on classpnp.sys in the system32 folder. I don't know if he loaded it successfully and gets stuck on the next thing or it gets stuck on it. After spending five hours trying out various community submitted hacks to get windows to start I've made no progress. I gave to accept that I'm probably going to have to reinstall.

  So I installed ubuntu on a USB key to access all my backup files. Currently uninstalling Visual Studio on my laptop in order to free up space to download the iso of windows (don't know how I'm going to write it on a dvd but without a hard disk). Fortunately my product key is stored online somewhere, what I would do if it wasn't? Would it not permanently lost?

  It is about 12 hours later with strong flavors of uninstalling/reinstalling, I always think that and mayble double that within hours of the versions to install to come, who knows. I spend almost every day on Visual Studio and SQL Server, and it is a real productivity killer.

  I never usually bother writing forum posts, but I just recently found a lot of free time to twiddle my thumbs. I try to keep my frustration with this situation contained by an evacuation are not much, but politely all upward, I'm more than a little annoyed.

  Ultimately if it's my fault not to do backups, a restoration of the point system and an image of the system before installing a Microsoft application.

  Yours sincerely,

  Ali.

  Hello Ali,.

  Your question would be better suited in the MSDN forums.
  There is a forum separate questions of Management Studio Express.
  Click here for a link to repost your question in MSDN forum.

  I hope this helps.

  Marilyn

• Could not open file mdf in Microsoft SQL Server Management Studio Express 2005

  I had Microsoft SQL Server Express 2005 already installed. I just installed the Microsoft SQL Server Management Studio Express 2005 and tried to open my mdf file. I get an error message that says:

  There is no editor available for ' C:\Inetpub\wwwroot\intran et\app_dat a\intranet .mdf).

  Make sure the application for the type of file (.mdf) is installed.

  I did something wrong? I just clicked through the default values in the Management Studio Express installation.

  How can I get it work?

  1. Log in to SQL Server Management Studio.
  2. Navigate to the database that you want to restore.
  3. Right click > tasks > restore > database.
  4. Once on the general tab select "from device" for the source of food, and then access the .bak file that you are restoring.
  5. Check that the Destination for restore is set to the correct database.
  6. Select the Options tab.
  7. Check "Overwrite existing of database (to be REPLACED)"
  8. Click OK
  9. If she is unable to help you, then you can use software professinal for sql databases crashed https://repairsql.recoverytoolbox.com/ Recovery Toolbox for SQL Server

• SQL server management studio 2008 Express intall error

  When you try to install SQL server management studio Express 2008 I get this error:

  TITLE: Default the SQL Server installation program.
  ------------------------------

  Setup of SQL Server encountered the following error:

  Invoke or BeginInvoke cannot be called on a control until the window handle has been created...

  ------------------------------
  BUTTONS:

  Ok
  ------------------------------

  Berfore I installed visual studio 2010 ultimate and Setup install with visual studio, sql server 2008 and I have windows xp servicr pack 3.

  ASK THE QUESTION IN THE SQL SERVER FORUM:
  http://social.msdn.Microsoft.com/forums/en/category/SQLServer

• Use Microsoft SQL Server Management Studio 2008 home

  I am a student in learning SQL. I have downloaded Microsoft SQL Server Management Studio 2008 as is the SQL software used in class. When I click on Connect, it is said that it can not connect. I chose the following options.

  Server type: the database engine
  Server name: (local)

  Authentication: Windows authentication

  What should I do?

  Hello

  Thanks for posting your query in Microsoft Community.

  According to the description, the problem is related to the installation of Microsoft® SQL Server® 2008 Management Studio Express to the point 8.1 of Windows, I suggest you to ask your question in the following link, because they have more expertise on this issue:

  http://social.msdn.Microsoft.com/forums/SQLServer/en-us/1cceeaf9-78EC-44ef-AAF8-b9965830f5c6/install-SQL-Server-2014-CTP1-on-Windows-81

  I hope this helps.

• Try to install Visual Studio 2010 via security Download Manager but he stopped at 100%. How can I use. The SDC file?

  I was downloading visual studio 2010 using SDM (Download Security Manager), but he stopped at 100% and nothing happened. Now, all I got is a .sdc file and not now how to use it. Can any body please help me?

  original title:. Problem of the SDC

  Hello

  Since you are faced with the question to Microsoft visual studio, it will be better to post the same question in the Microsoft visual studio forums

  http://social.msdn.Microsoft.com/forums/en-us/category/VSTS

• Windows Update - Outlook Express will not download new email after the last update

  After you have installed the latest update of Windows XP files (KB972270; KB977840; KB955759; KB890830) and my OUtlook Express will not download my new messages. Error message occurs sating that a file is possibly corrupted and use Scandisk to repair. This has happened on my computer and my wife using the same basic configuration. Could not resolve the problem before doing a system restore to a previous Restore Point before the update of Windows. So my Windows Updater is no longer needed.

  After you have installed the latest update of Windows XP files (KB972270; KB977840; KB955759; KB890830) and my OUtlook Express will not download my new messages. Error message occurs sating that a file is maybe damaged...

  Display error message (verbatim) complete (e.g., default mail client is not properly installed).

  If you use Outlook Express as the default mail Client, why same Outlook there?

  Microsoft Outlook 2003 updates [for example, KB977840] change default mail manager in Microsoft Outlook
  http://www.oehelp.com/OETips.aspx#13
  Related: http://support.microsoft.com/kb/933450 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Need help sql server 2008 management Studio.

  I imported a sql database to use Expression Web 4 according to a tutorial I followed from C:\Program Files\Microsoft SQL Server\MSSQL10_50.SQLEXPRESS\MSSQL\DATA. Later, SQL Server 2008 Management Studio running on XP3 returns error that it is impossible to browse the database, which is still on display in the DATA folder that contains all the other databases, as well as in the Expression Web folder, in that it has been copied. How the database for me to work with Management Studio? Glaust

  Glaust, did you eventually get this working or is this even a question? If you can provide a little more information about what you were doing to import you talk. Am I right in assuming that your instance of SQL Server has the database is available for you to access through SSMS. Then, you have completed the import and now you can see the DB in the SSMS DB tree but you get the error and are unable to access the DB?

  Thank you

• Microsoft SQL Server 2008 R2 management studio is free off cost or you had to pay for this?

  Microsoft SQL Server 2008 R2 management studio is free off cost or you had to pay for this?

  Hi JayaPrakashN,

  I would suggest to repost your question in the SQL Server Express Forums here:

  http://social.msdn.Microsoft.com/forums/en-us/SQLExpress/threads

  Thank you!

• Product key for Visual Studio Express 2013 for Windows

  I downloaded Visual Studio Express 2013 for Windows desktop and connected to extend my trial. After that, do I have to buy a product key or it is not free?

  Thank you in advance.

  Hello

  Problem with Visual Studio 2013 are supported in the MSDN Forums. I suggest you send the request in the following link.
  http://social.msdn.Microsoft.com/forums/vstudio/en-us/home?Forum=visualstudiogeneral#Forum=vssetup&filter=AllTypes&sort=lastpostdesc&content=search

  Hope this information helps.

• Visual Studio Express from 2012 for Web not detected during installation.

  I installed Visual Studio Express 2012 for the Web and need to install the Oracle for Visual Studio development tools, but when I run the Setup ODT, it captures any installation of visual studio.
  
  Is there a work around for this issue, or should I change to a different version of Visual Studio?

  Hello

  You will need to install a full version of Visual Studio. By the readme:

  http://www.Oracle.com/technetwork/topics/dotnet/downloads/install112030-1440546.html
  
  Note: The Visual Studio Express editions are not supported with Oracle development tools. However, ODP.NET is supported with Visual Studio Express Edition.
  

  So, you can still use the things ODP and code "manually" to access the database, but the Oracle development tools will not work.

  Greg

• STOR. TV2 E 2 TB fails to download the BIOS

  The unit (STOR. TV2 E 2 TB) fails to download the BIOS when it is connected to the TV, so it cannot be used as a multimedia and with the multimedia menu option; on the other end when it is connected to a PC via a USB port files can be read and written about it.

  I need to know how it is possible to replace or update the BIOS on the device, having in mind that without access to the device via the TV and remote control, only via PC (and USB), by editing the files on the HARD drive.

  Concerning

  Hello

  Format you the HARD drive in the past or have you changed something in the partition table?
  This procedure may affect the media functionality.
  Unfortunately, it seems that there is no new update of firmware for this device, and therefore, you will not be able to update the firmware.

  But try to connect the device to the TV using two different solutions.
  Usually, you can connect the device Stor.E TV2 to the TV using the HDMI cable and the composite AV cable. I recommend you to check two workaround solutions

• Updates fail to download using Windows Update

  I am running Windows XP Professional Sp3 and when you use Windows Update its identifies I need 88 critical updates. I confirm that I am reuqire to install but they constantly fail to download.

  Please answer all the questions of diagnostic following by number in your very next answer (no need to quote this post):

  1. what application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  2 a Norton or McAfee application already installed on this machine?

  3. do you have a Norton or a trial of free McAfee come preinstalled on the computer when you bought it? (No matter if you have never used or activated).

  =======================

  You can encounter errors related to connect temporary [e.g. 0x80072EFF 0x80072EFE 0x80072EFD; 0x80072EEF; 0x80072EE2; 0x80072EE7; 0xC80003FA; 0x8024402F] when you use Windows Update or Microsoft Update to install updates
  http://support.Microsoft.com/kb/836941

  How to reset the Windows Update components?
  -Online skip the section to APPLY to if Win7; Access KB971058 via Internet Explorer (32-bit) only. Run the difficulty in DEFAULT and AGGRESSIVE modes, then restart [1]
  http://support.Microsoft.com/kb/971058

  ~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• WinXPProSP3 - last batch upddates fail to download. Ms. FixIt50202 also failed because "BITSfailed to start.

  KB 978338 977816, 918601, 979309, 979683, 980232, 918349, 981432 and 890830 failed to download. Dialog says "download updates" but the progress continues @ '0 '. I followed the advice found in this forum earlier today and I tried to download and install MS FixIt50202 but she failed too because «...» BITS was able to start. Make sure you have sufficient privledges to start system services. "I'm the 'administrator' on this machine. I've never had a problem with the updates before.

  Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself. And no, Symantec Support won't tell you who! This gives a whirlwind:

  1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  (3 after some you have a copy of your key of handy product, uninstall NIS 2010, LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).

  4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.

  NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!

  5. right click on the file that you saved in step #1 above, and then select run as administrator.  DO TAP not your keyboard until the race ends, then restart.

  6. do a clean install of NIS 2010 using your product ID & reboot: http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN

  NOTE: Do not activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately.

  7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".

  8. rerun the difficulty mode by default , and then run it it Aggressive mode: http://support.microsoft.com/kb/971058 [trust me].

  9 test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Downloaded the latest Windows 7 update yesterday, November 3, 2009 and lost all my "Favorites" in MSN. Also, when I do a reboot, the Verizon FIOS Media Manager starts. Only the downloaded last update - has nothing else. Please notify

  Downloaded the latest Windows 7 update yesterday, November 3, 2009 and lost all my "Favorites" in MSN. Also, when I do a reboot, the Verizon FIOS Media Manager starts. Only the downloaded last update - has nothing else. Please notify

  Yes I have FIOS Media Manager installed, but I've done since the start of Windows 7.  For the first week or so it does not start on my download restarts.  It started with this Nov 3 update from Microsoft.  I went to downloads and there were two of them; Update for Internet Explorer 8 for x 64 based and updated Windows Defender definition.

  After you install these two updates on restart FIOS M.M. was live at startup and my favorite MSN have disappeared.  I disabled FIOS M.M., but somehow, he has been activated with this download.  I went on my drive external backup and recovered the Favorites but am always intrigued by this phenomenon and how it changed my registry.