Manager with the borders...

Similar Questions

• With the borders browser compatibility

  I would like some advice on the compatibility of the browser with the borders. Web address removed * looks fine in IE7, but not in Safari or Firefox. It seems that Safari and Firefox ignore the thickness of the border and on the three columns adds progressively upward and made the last column appears shifted. Any help much appreciated for this newby!
  Thank you
  
  

  Hello

  Instead of using "thin", try using 2px for the thickness of the border.
  In this way, it is not open to the interpretation of the different browser to "end".
  means.

  For example, to change the left for this column:

  {#leftColumn}
  float: left;
  Width: 200px;
  height: 450px;
  padding-right: 10px;
  padding-left: 10px;
  background-color: #FFFFFF;
  border: 2px solid #CCCCCC;
  }

  Repeat the attribute border for the middle and columns on the right, as well.

  Take care
  Tim

  "MKALX" wrote in message
  News:fo6jnf$QDV$1@forums. Macromedia.com...
  > I would like some advice on the compatibility of the browser with the borders.
  > www.trustwater.com seems perfect in IE7, but not in Safari or Firefox. He
  > appears
  > Safari and Firefox ignore the thickness of the border and during the three
  > columns
  > This gradually adds up and makes the last column appears shifted. Any
  > help.
  > very appreciated for this newby! Thank you
  >

• Want to know primary and secondary configuration to the call, Manager with the voice gateways

  Hi all

  Hope you all are doing well, I wanted to know that we have two other PRI service provider and we want one of them are primary and secondary schools on the other. We have two supplier dedicated 4-4 finish lines. Please provide me with the part of configuration that are required in this case and how to re a SP for primary education and another SP for secondary lines.

  Thank you

  Arjun keita

  Hello Arjun,

  For the full bridge configuration you can check the guides below, but for the PRI redundancy, you create dial-peers and specify the feedback:

  https://www.Google.co.in/URL?SA=t&source=Web&RCT=j&URL=http: / / www.cisco...

  Voice POTS dial-peer 1

  Destination-pettern 0 t

  Port 0/0/0:15

  Preference 0

  Dial-peer voice 2 pots

  Port 0/0/1:15

  Preference 1

  Dest-model 0 t

  Dial-peer voice 3 pots

  Description incoming only

  Incoming called-number. T

  Direct inward dial

  Aseem

  (Please rate if useful)

• Problem with mouse input Manager with the mouse button

  Hello
  
  I'm trying different things to determine weather conditions, I'm going to use JavaFX for one of my projects. Here's one of my problems. I had a scene with only a circle inside. I want to run an event that would be returned when I press the left button of the mouse outside of the circle, then enter the circle with the mouse and the button is held down. However, it seems that the mouse gesture events are blocked when you press a button.
  
  Does anyone have a solution to my problem?
  
  Thank you.

  Hello

  You're right, the "MouseMove" and "mouse entered" events seem to no longer be fired when a drag is in progress. A little annoying, but perhaps also by design.

  Drag mouse events on the other hand get programming at this point so you can use them for what you want. It seems THAT JFX suppose the node where the drag started is the one who cares for the event if you don't get the events drag on the circle directly. So the simple way only I can see for this is follow slide it the mouse on the "outer" and then detect what child was wriggling on manually. Something like this:

  final FlowPane rootNode = new FlowPane();
  rootNode.setOnMouseDragged(new EventHandler()
  {
      public void handle(MouseEvent mouseEvent)
      {
          System.out.println("Mouse dragged on root pane to " + mouseEvent.getX() + ", " + mouseEvent.getY());
          for (Node child : rootNode.getChildren())
          {
              if (child.getBoundsInParent().contains(mouseEvent.getX(), mouseEvent.getY()))
              {
                  System.out.println("Mouse is now over: " + child);
              }
          }
      }
  });
  
  Circle circle = new Circle(50);
  rootNode.getChildren().add(circle);
  

  Is not ideal, but it should work.

  Default you can also play with the stuff of Drag and Drop: http://download.oracle.com/javafx/2.0/drag_drop/jfxpub-drag_drop.htm

  In what you can do what you ask, but you will need to do a little more work to play nice with the larger world of DND. Start with something like this but:

  final FlowPane rootNode = new FlowPane();
  rootNode.setOnDragDetected(new EventHandler()
  {
      public void handle(MouseEvent mouseEvent)
      {
          System.out.println("Drag started on root node");
          Dragboard db = rootNode.startDragAndDrop(TransferMode.ANY);
          ClipboardContent content = new ClipboardContent();
          content.putString("Test");
          db.setContent(content);
          mouseEvent.consume();
      }
  });
  
  Circle circle = new Circle(50);
  circle.setOnDragEntered(new EventHandler()
  {
      public void handle(DragEvent dragEvent)
      {
          System.out.println("Drag entered on circle");
      }
  });
  rootNode.getChildren().add(circle);
  

  There may be other ways too, but that's what I found.

  Hope that helps,
  zonski

• VLAN Management with the 1000V and UCS

  If I want to use 10 VLAN management, to configure the following:

  1000V - VM vEthernet port profile coelio with VLAN 10, Ethernet uplink profile includes 10 VLANS

  UCS - vNIC in the Service profile, VLAN 10 and include the UCS uplink trunk VLAN 10

  Switch upstream: include 10 VLANS in trunk port.

  Ok?

  Now, this management VLAN, I then jeutiliser can for everything? I mean to 1000V management VLAN, vSPhere management, management FI and switch? For example management of 1000V or different from others?

  Hi Atle,

  Yes, is that what you mentioned, it's good in terms of activities you need to perform. However, I wish to add a few:

  (1) define him vlan on the UCS - except if you do this, that you won't be able to add to the vnic. More once you have set the vlan automatiaclly will get added to the list of trunk on uplink ports (unless you l2-disjoint set up)

  You can have the same vlan for all management, unless you have some traffic that you would not want some devices to see / meet.

  . / Afonso

• Low cost intelligent or managed switch with the console interface

  Could someone recommend more low switch cost smart or managed with the interface of the console?

  I only need 4 ports but need to control CLI, telnet, or SSH.

  no downtime

• How to associate a bean managed with model custom content presenter

  Hello

  We use webcenter Portal 11.1.1.8.

  We have created the model of presenter content customized by using application portal Webcenter Framework. We use the Portal Server model Extension to extend Webcenter portal. The requirement is to associate a bean managed with the presenter of custom content model.

  Thanks in advance for your help.

  Nikhil,

  You can download DesignWebCenterSpaces to the URL http://download.oracle.com/otndocs/tech/webcenter/files/DesignWebCenterSpaces_11.1.1.8.0.zip

  It has the "WebCenterSpacesResources" project, which helps you to organize the active portals (including the content presenter models) and resources of portal to create/update.

  If you want to use beans controlled inside the presenter content model:

  (Development of components in ADF for WebCenter portal using the PortalExtension project http://docs.oracle.com/cd/E29542_01/webcenter.1111/e27739/jpsdg_wcsres.htm#JPSDG14173)

  1. you create the bean managed in PortalExtension project

  2. set up in faces-config. XML

   

      myManagedBean

      com.Portal.CP. MyManagedBean

      request

   

  3 deploy a part of extend.spaces.webapp.war.

  After deployment, the managed bean will be available for the presenter content model.

  
  

  K
  

• How can I get Adobe Color Printer Utility to print with the Matte Black ink cartridge?

  I am running PhotoshopCC on OS 10.10.5. I need to print a target color no color management with the Adobe Color print utility. I was able to print a book brilliant without problem. But when I tried to change the print setting in black for another matte paper, there was no set... grrr... mast helpppppp!

  You can try to reset your printer by following the link below.

  Mac OS X: How do to reset the printing system - Apple Support

  It will be useful.

  ~ Mohit

• After the password reset. Able to connect with the old and the new OAM password.

  Hi all
  
  I have it here's the installation program.
  
  OAM - 10.1.4.2.0 (BP08)
  OVD - User store
  Advertising - Store configuration and policy.
  
  Here's the scenario.
  
  I have a user (spokuri) OAM with the password (Oracle123) and im able to connect with these credentials.
  
  But it's when I reset the password for Oracle1234 for spokuri using the administrator credentials.
  
  Next time, when I try to connect with these credentials(spokuri/Oracle123) should not allow me to open a session to the User Manager since I changed the password to Oracle1234. Am I rite?
  
  But, it allows to connect to the User Manager with the old password and the new password.
  
  Please let me know your comments.
  
  Thank you and best regards,
  
  Siva NAKI.

  Hi Siva,

  If the announcement is you user store (even through OVD) then this could be a function of Microsoft:

  http://support.Microsoft.com/kb/906305/en-us

  Kind regards
  Colin

• Manage identities does not 'from' addy align with the "sent to" addy when replying

  I just installed 24.6 and used the 'import' of Eudora. Everything seemed to move pretty well, but I can't understand the ' sent to '. I tried in "manage identities", does not. The problem is you answer a list of mail and thunderbird wants to insert my dominant addy instead of the address who sent the original e-mail. It is a problem when the identity must be subscribed/registered.

  He does not do it every time, sometimes it inserts the correct answer "from". Cannot make sense.

  Something to do with the import?

  something to do with where you are in the folder hierarchy.

  This account will be the default SMTP is used when the selected account is unknown, so if you have a list of e-mail account and move them e-mails in local folders to the selected SMTP server will be the value by default, where as if you are in the folder of the account the SMTp response. It goes the same for identities.

  I'm pretty sure that one of these modules will meet your needs https://addons.mozilla.org/en-US/thunderbird/search/?q=identity & cat = all & appver = 24.0 & platform = windows

• Is it possible to record "Mozilla Persona" - password with the FF password manager?

  Is it possible to record "Mozilla Persona" - password with the FF password manager?
  Thank you
  pollti

  Persona.org or login.persona.org is present in your Exceptions list?

• SQLite Manager does not work with the v11. Until make you it easier to go back to older versions or newer versions stop, breaking most of the modules I won't use Firefox

  SQLite Manager does not work with the v11. Until that make it easier to return to older versions or newer versions stop, breaking most of the modules I use FirefoxHow to come back at 10 Firefox?

  Update Firefox 23.0 which published yesterday afternoon.

  • https://www.Mozilla.org/en-us/Firefox/all/

• Problem of management of power with the Satellite S2430-402

  Every time is start my laptop, I get a message saying "%1 is not a valid Win 32 application" under the heading "E-power", thus the Toshiba power management does not load. I tried to uninstall and reinstall the software from the cd, but it does not work, and I still get the message.

  The problems began after I installed a program called Ghost Surf 2005 and ran for the first time. Since then I uninstalled but still has problems. I am running Windows XP operating system.

  Can anyone help?

  Hi Dan,.

  It seems that the software corrupted a file which is responsible for the powermanagement! There is what we call common files and it can be replace a file, the installation of Ghost surf!

  You can try to solve it with the Windows XP system restore when you set a restore point! Back to a restore point that was resolved before installing the software!

  Hans Bye

• When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal

  When he puts an end to Firefox 3.6.6 firefox.exe continues to turn, visible in the Manager of tasks (XP) and stimulates the activity of the CPU up to 60% with the danger of overheating. Have not found an appropriate response with the search term "abnormal termination of the program."

  This has happened

  A few times a week

  is after update of Firefox 3.6.4

  I have the same problem with Firefox 3.6.6 except that it also consumes massive amounts of CPU during the race. This version also adds a new process on your system. I am running XP and in the beginning I tried to disable some plug-ins. Always consumed too much memory. I went back to version 3.6 and the new process went, and the CPU consumption is way down. Something is wrong with the latest version of Firefox, I never saw behave this way. Revert to a previous version (Filehippo) and you will see the difference.

• HP T510 - remove DESKTOP connections the connection with the HP Device Manager Manager remotely

  I can manage, deploy, and send registry updated successfully to all HP T510 customers on my network via HPDM.

  When deploying a RDP connection is successful, but it added the new connection in the connection list.

  I was assuming that other connections would be withdrawn when the deployment of a record of a customer with the correct setting - but the new connection is just added to the existing list of RDP connections and I need to delete the other.

  Please could someone advise me how to remove DESKTOP connections remote connection using HPDM Manager screen.

  I found it! the option delete isn't available when deploying new connections - it's a checkbox at the bottom of the wizard