VLAN Management with the 1000V and UCS

Similar Questions

• HP 15 laptop: problem with the touchpad and the key "stuck."

  Hello!
   
  Last weekend, I have an irritating problem with my HP 15 laptop. Bought two years ago and upgrades to Windows 10 a year ago.
   
  First of all, my touchpad started to not work properly. It "freezes" and I can't use it until I click the ESC key, but it doesn't last and "freezes" again a few seconds later. Then, everytime I open a window where there is a text box (Start menu, edge browser, Control Panel, etc.), the number 5 is entered automatically and permanently, as if the button 5 has been blocked. I did a quick check and button 5 do not seem physically stuck.
   
  Yesterday, I restored the system to the factory settings, so I'm back to 8.1 for Windows and then upgraded to Windows 10. Everything seems to work fine, but this morning, the problem was back. Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.
   
  Thank you in advance for your help!

  Welcome to the HP support community @gouch3.

  I understand that you have a problem with the keyboard and the touchpad on your laptop from HP 15.

  Have you tried to use a keyboard external and mouse at all?

  Have you tried to go to Safe Mode to see if the problems persist in there?

  Have you tried to perform a material or forced reset Reset?

  Did you do a test of material?

  Have you updated your drivers?

  gouch3 wrote:

  ... Is there something I can do? What is the problem caused by Windows 10 or the computer? Should I restore it to Windows 8.1? Everything worked great til last weekend, I don't know what that was.

  It could be a driver problem to be able to look at that for you, I need your model number. I wish I could give you an answer or not, but at this point without the troubleshooting results and the model number, it is difficult for me to say.

  I can say that if everything works in point 8.1 of Windows without problem, the driver TROUBLESHOOTING is a great place to start. Please try to follow these steps for the keyboard and the touchpad of troubleshooting:

  • Beginning
  • Search for Device Manager
  • Search results, open Device Manager.
  • Click on display
  • Show hidden devices.
  • Click the arrow next to keyboards.
  • Right click on the name of the keyboard device.
  • Select uninstall.
  • Continue deleting the names of devices in the category keyboards until the feature of all the names have been uninstalled.
  • Restart the laptop twice.

  Touchpad:

  • Type of research, "Device Manager."
  • Click on Device Manager,
  • Expand mice and other pointing devices.
  • Right click on the TouchPad,
  • Click on uninstall.
  • Restart the computer laptop twice,
  • Reinstall the TouchPad card.

  I found a document of troubleshooting for you to try also called Portable keyboard troubleshooting. Please be sure to follow the steps described in this document.

  The best document I have for TouchPad problems is the use and troubleshooting of the TouchPad and ClickPad document. 

  Here is a link to the HP Support Assistant, if you need it. Just download and run the application and it will help with the software and drivers that need to put up-to-date.

  This is a great question other clients may also be questioned. When we came to a resolution, please share what has worked for you with others by marking this post as an acceptable Solution. If you want to show appreciation for my efforts today, please take a second to click the Thumbs Up button below.

  If you need assistance, I would be more than happy to continue to help you. Please re-post with the results of the resolution of the problems. Could you please also provide your model number (How can I find my model number or product number?)

  Thank you!

• Problem with the H and V fieldmanager: S

  Hi to everyone! D

  IM new in this forum and I would like to ask one thing.

  I want to insert 3 BitmapFields on the screen, but with a particular organization, they must be placed as follows.

  I know I have to do it with the horizontal and vertical field Manager, but I don't know how > _

  If anyone can help me I will always be grateful with him

  http://www.freeimagehosting.NET/uploads/ae64a41495.jpg

  PD: below each image must be an aaaaaand RichtextField version are blackberry 8120 4.5.0 > _

  rboatright pretty well summed up my thoughts, but I would like to add:

  -Don't think you need the external V0

  -Center Images

  -layout on all labels (what I'd do RichTextField unfocusable), replace the value of width the width of the images

  -Center of all labels

  -Limit the width of V2 and V3 to Display.getWidth () / 2

  job done...

• Photoshop elements 13 said that there was a problem with the download and recommend exit us and restart

  We bought a new laptop and 13 items today. We spent the day trying to get it set up. We tried to download the 13 items at least 6 times. Whenever it took about 45 minutes to download, but when we open the file and click on set up it says that there was a problem with the download and it recommends that stop, restart and download it again? How we work what goes wrong? We had to remove the files and start every time. I don't have another day to try to get this sort. Should not it is just a matter of downloading and then, should not come with a message to install and we just press Yes and it works.

  You can also download the trial version of the software directly (No Download Manager) through the page linked below and then use your current serial number to activate it.  You should get two files, an executable file and a compressed file.  Run the executable file and it will install the rest.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

• After the password reset. Able to connect with the old and the new OAM password.

  Hi all
  
  I have it here's the installation program.
  
  OAM - 10.1.4.2.0 (BP08)
  OVD - User store
  Advertising - Store configuration and policy.
  
  Here's the scenario.
  
  I have a user (spokuri) OAM with the password (Oracle123) and im able to connect with these credentials.
  
  But it's when I reset the password for Oracle1234 for spokuri using the administrator credentials.
  
  Next time, when I try to connect with these credentials(spokuri/Oracle123) should not allow me to open a session to the User Manager since I changed the password to Oracle1234. Am I rite?
  
  But, it allows to connect to the User Manager with the old password and the new password.
  
  Please let me know your comments.
  
  Thank you and best regards,
  
  Siva NAKI.

  Hi Siva,

  If the announcement is you user store (even through OVD) then this could be a function of Microsoft:

  http://support.Microsoft.com/kb/906305/en-us

  Kind regards
  Colin

• I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. Help

  I have copy of old tbird and seamonkey e-mail files with the files and emails for each. I need to add to new tbird install. can not find a way to do it. HELP PLEASE. previous e-mail files are under mail then mail.earthlink* .net and each of the five mail .net is an email address I have. I can't find a way to identify each file by email to the specific email address (IE mail.my E-mail name.net) so I can copy the files and emails from the past to the email addresses now under tbird. previous installed e-mail identities may not be the current configuration of e-mail files in tbird. I think that I must be sure that mail.name.net matches the previous mail.name.net to be able to copy and paste the old to the new. is there a way to find the file name correct the old email and correspond to the new? all my emails very important information are mostly in the old mail electronic id and must be available in the identification of email again (but same) how can I do this?

  http://KB.mozillazine.org/Importing_folders

  Use this module.

  https://addons.Mozilla.org/en-us/Thunderbird/addon/ImportExportTools/

• The computer crashes: something to do with the minidump and sysdata.xml?

  My computer broke down twice now and restart an error message pops up saying "your computer has recovered from a serious error". It is said that two files in the error report will be sent to microsoft. the first complete mini103106 - 01.dmp and the second sysdata.xml

  I could find these files and delete them but have no idea if this would solve the problem and do not want to do the wrong thing...

  Hello

  Not easy to say why this is happening, but for me it s definitely something wrong with the software.
  Well, in this case we can only speculate. You know, it s Microsoft Windows and sometimes things happens without any reason :(

  I have heard from probably the system restore function could be corrupted and no have deleted the folder with the minidump and disabled the system restore feature in the control panel-> system.

  But in my opinion, the system restore function is important and necessary if you want to restore the operating system to the beginning.
  That's why I put t recommend disabling this feature.

• I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?

  I've updated for picture with the captain and when I plug in my iPhone it loads the same pictures twice each time how it stop loading the same things every day?  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  I tried to make the old default iphoto but picture still open when I plug in my iPhone?

  When the iPhone is connected and Photos opens, select iPhone in sideba of the windowr of Photos. Then, uncheck the option 'Open for this iPhone Photos' below the toolbar.  Do this for all your iPhones. The hook should be unmarked for each device individually.

• My new Apple TV v4 does not smoothly on Airplay with my MacbookPro and Air laptops but with the iPhone and iPad Airlay gets so juddery and then goes off - laptop computer WiFi connections all that happens on clues?

  Devastated to find that the new AppleTV works great on Airplay / mirroring with the iPhone and iPad devices but completely useless on the NEW laptops.

  Trying to show any video for example utube creates immediately hop on the TV screen when you use the Macbook and in no time the WiFi connection is stunned.

  What is going on?

  I use ElCapitan, and the last 15 "16GB i7 Macbook MacbookPro and not expect a problem with streaming media.

  Absolutely well on Airplay with bith an iPhone 6 Plus and also an Air iPad

  This will be due to a network problem. There is a difference between mirroring of a phone/Tablet and grow to a full desktop in real-time

  Mmake that there is no other activity (other streaming, web browsing, backup network etc.)

  Try to connect the Apple TV via ethernet

  To see a current state of the network to obtain a report of istumbler or similar. Look for the strength of the signal, noise, networks nearby

  Test on another network

• How can I measure the variable tension with the DMM and switch?

  Hello, engineer,

  I am a student, I want to measure the varying tensions from V to Via. I have the following equipment: SMU-1065 PXI-4065 PXI-2529. I use the PXI-8360 and PXI-8361 to connect with my PC. I hope I can do that when I have the next blood I should click with the mouse and connect the right position to the object of measurement.

  How can I achieve that?

  Any suggestions with great satisfaction.

  Since I know a little English, if I did not explain my question clearly, please ask me.

  Best wishes.

  Kind regards.

  chuanyuehuoxian

  Yes, you can.

  You can set the samples when using DMM.

  You can also refer to the example in LabVIEW.

  THX!

• Problem with the report and the system of axis 2d

  Hi, I'm trying to write a script with tiara, who wrote a 2d axis system in the report but I'm having a lot of problems with it.

  What I'm trying to do, is make 3 or more system axis 2d in the report, each displaying a part of the data of 2 channels (x = ch0, ch1 = y).

  With only 1 graphic I get what I want, but when I try to add the 2nd or the 3rd, they show without my defined x-scale and with the offset x different from the first chart.

  I tried everything, but I could not remedy

  I added as attachments the .csv file that I use to ch0 and ch1 and 2 screen shoots "what I get" (about the problem with the script) and "what I hope to get" (done manually, is what I'm trying to get the report)

  Any help will be appreciated, thanks in advance

  Ierman

  I'll post my code here:

  Dim Xscale, Yscale
  XScale = Array (0,25,0,5,49)
  Yscale = Array(-0.2,0.2,-0.2,10,4)
   
  Call PicDelete()
  Call GraphObjNew ("2D-Axis", "2DAxis1")
  Call GRAPHObjOpen ("2DAxis1")
  D2AxisTop = 1

  D2AxisBottom = 70
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_1")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale (0)
  D2AXISYEND = Yscale (1)
  D2AXISYORIGIN = Yscale (2)
  D2AXISYTICK = Yscale (3)
  D2AXISYMINITICK = Yscale (4)
  Call GRAPHObjClose ("2DYAxis1_1")
  Call GRAPHObjOpen ("2DXAxis1_1")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale (0)
  D2AXISXEND = Xscale (1)
  D2AXISXORIGIN = Xscale (2)
  D2AXISXTICK = Xscale (3)
  D2AXISXMINITICK = Xscale (4)
  D2AxisXTxt = ""

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_1")
  Call GraphObjNew("2D-Curve","New_Curve")

  Call GraphObjOpen ("New_Curve")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve")
  Call GRAPHObjClose ("2DAxis1")

  Dim Xscale1, Yscale1
  Xscale1 = Array (25,50,0,5,49)
  Yscale1 = Array(-0.2,0.2,-0.2,10,4)
  Call GraphObjNew ("2D-Axis", "grafic")
  Call GRAPHObjOpen ("grafic")
  D2AxisTop = 40

  D2AxisBottom = 37
  D2AxisLeft = 1
  D2AxisRight = 1
  Call GRAPHObjOpen ("2DYAxis1_2")
  D2AxisyScaleType = "manual".
  D2AXISYBEGIN = Yscale1 (0)
  D2AXISYEND = Yscale1 (1)
  D2AXISYORIGIN = Yscale1 (2)
  D2AXISYTICK = Yscale1 (3)
  D2AXISYMINITICK = Yscale1 (4)
  D2AxisYTxt = "" ' testo asse label y
  Call GRAPHObjClose ("2DYAxis1_2")
  Call GRAPHObjOpen ("2DXAxis1_2")
  D2AxisxScaleType = "manual".
  D2AXISXBEGIN = Xscale1 (0)
  D2AXISXEND = Xscale1 (1)
  D2AXISXORIGIN = Xscale1 (2)
  D2AXISXTICK = Xscale1 (3)
  D2AXISXMINITICK = Xscale1 (4)
  D2AxisXTxt = «»

  D2AxisXColor = 'black '.

  D2AxisXTickAuto = 1
  D2MTickLineWidth (1) = 0.1
  D2MTickLineType (1) = "solid".
  D2AxisXTickSize = 60
  D2AxisXTxtAutoCo = 0
  D2MTickColor = "red".
  Call GRAPHObjClose ("2DXAxis1_2")
  Call GraphObjNew("2D-Curve","New_Curve1")

  Call GraphObjOpen ("New_Curve1")

  D2CCHNX = "[1] / [1]" "

  D2CCHNY = "[1] / [2]" "

  D2CurveColor = "red".
  Call GraphObjClose ("New_Curve1")
  Call GRAPHObjClose ("grafic")

  Hi lerman,.

  Here is an edited version of your code that works on my computer.  A problem that I know that I fixed it was that your presentation of the STATE was in the name-oriented mode but you use the variables based on the number to assign it X and Y channels.  The execution of these commands in a loop FOR makes it much easier to debug the code and to avoid any annoyance at first.

  Brad Turpin
  Tiara Product Support Engineer

  National Instruments

• I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3.

  I've updated VIA / S3G UniChrome IGP plug-and-play reverse, but the update still no resolution 1600 x 1200 with the exception and others with the same ratio of 4 x 3. That did not help.

  Hello

  1. What version of Windows are you using?
  2. What is the brand and model of the computer?

  I suggest to run the patch from the following link and check the status of the issue.

  Hardware devices do not work or are not detected in Windows.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  If the problem persists, I suggest you to send us more information to help you better.

• How to remove an old version of MSN (with the butterfly) and messages inside?

  I always use an msn address.  My desk top still shows an older version (with the butterfly) and when you click on this old old messages are there.  How to remove this version and messages.

  Hello

  Please refer to this article.

  How to uninstall the MSN Explorer software for my computer?

  http://answers.MSN.com/solution.aspx?SolutionID=115dc6c5-4ae7-4e38-8e0b-3eac07d020fa

  If you still have any questions, then contact msn support

  How to contact MSN customer service

  http://support.Microsoft.com/kb/940784

  I hope this helps.

• Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Can someone give an example of how to configure the subnet mask associated with the network and host of an IP address part?

  Hi stuckfree,

  The question you posted would be more appropriate on the TechNet Forums. I would recommend posting your request here.

  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• My 3 year old has played with the computer and now my screen is sideways. How should I do?

  My 3 year old has played with the computer and now my screen is sideways.  How should I do? I tried my computer and went through everything on the screen and doesn't change anything.

  Here's how to do hold Ctrl + Alt and then press the arrow keys on your keyboard.

  or right click on desktop, select options graphics then Rotation.