Manual for Dell place 8 Pro 750-LT. Stylus?

Similar Questions

• Anti-virus for Dell place 8 Pro programs

  Is there a program for my Dell coming Pro 8 anti-virus?  Norton does not support it.

  AMINA-WS,

  Windows 8 and 8.1 should have already installed Windows Defender. You can also try FREE Avast Home Edition and see if that helps.

  Rick

• meeting place for Dell 8 question pro

  Hello I like just my dell place 8 pro! even if I have a question with its port can I hook it up to my TV via a hdmi and cable load at the same time? Thank you!

  St. Lamar

  Hi, Regulonpro - there is a product that comes out in June, which will make it easier for us to use USB and charge at the same time. You can learn more about here.

  http://www.Amazon.com/GP/product/B00J5S2TS4

  The product from Amazon for data and power through the port of the tablet at the same time is the + Port that I mentioned above.

• Dell place 11 Pro keyboard - touchpad does not

  touchpad does not now

  has worked for 2 months - then stopped working

  noticed 'urgent' download for touchpad on dell driver support page - downloaded and installed

  still does not

  pls advise

  I actually found a way how to solve this problem. Tried above all, disconnect battery, registry fixes and etc... In all cases at some point touchpad become unresponsible. But what I found accidentally - while the touchpad is not respond to gestures and does not move a cursor - function click on the touchpad still works. in any case, this close to me do not have a solution.

  As always, the solution is just magic - all you need to do to restore a bloody thing - is to run SynaUtilitySfx.exe, while the Tablet is connected to the keyboard. The utility will fail saying that the touchscreen device not found - but this will allow touchscreen and a touchpad. Despite I'm an IT professional - I can't explain what is happening, but this method has worked for me.

  I disconnected the keyboard shelf and set the keyboard on the charge, which immediately ruined the touchpad when I connected the keyboard for Tablet. I ran new SynaUtilitySfx.exe - all work. A few times to prove: it does not fix the bloody thing!

  You can get SynaUtilitySfx.exe stuff from the dell Web site, they call it Panel Touch Firmware on Dell place 11 Pro 5130.

• Reference Dell place 11 Pro shipping disappointment

  I am writing this primarily to express my frustrations and I hope that someone at Dell will take notice because I think to complain to someone on the phone at Dell will fall on the deaf ears and will be a waste of time.  It seems that we, the consumers are at the mercy of Dell and for me, this is unacceptable.

  A bit of history.  I ordered a Dell coming Pro 11 the day where he was available to order (11/8).  I had a few changes, I had to make to the order, remove their extended maintenance guarantee and remove the stylus and the keyboard - no change in reality have been made to the tablet itself.  This has been done on 11/11.  I never received a confirmation email from Dell telling me when should I expect my 'New' order, but I have received an order number of the person that I spoke, which was the only way I could follow the command.  The 'new' had a date of expected delivery of 12 to 18.  It seemed reasonable to me and I was happy to wait and excited.

  In the meantime, I started to order accessories - screen protector and a 64 GB MicroSD in preparation for the arrival of my tablet.  18 I still had not received my being shipped order notifications and Dell sent an email about why, or when I would expect it.  I had received SEVERAL phone calls indicating that the order was in production and should be here 12/18.  I think that on the 18th or 19th I checked the Dell order support site to see that the issue had been delayed until 02/01/2014.  I was shocked... and spoke to the person who asked me the prescription being in production about why it had not been shipped.

  The 2nd came and went, and still, only, I received a phone call from the rep of Dell indicating the order had been pushed back to 9, then on the 9th, declaring that it had been postponed until the 16th.  This morning I checked the Dell support site to be notified that the scheduled delivery date is 01 23, 2014.

  I canceled the order this morning because I don't think I, or someone else should wait indefinitely for their order to arrive once his promised summer unnecessarily.  The "estimated delivery date" is a joke and does not reflect exactly any time in which the order could actually ship.

  Looking on the Dell website, you can order a Tablet Dell place 11 Pro with the 16/01/2014 estimated shipping date all the way until 06/02/2014 depending on the type of Tablet that you choose.  I know I'm not the only one who had this problem and I hope that more people shut up someone at Dell reviews and change the way they do business.

  I work in the COMPUTER industry and I am highly disappointed by Dell.  For now I'll only order Dell hardware for the company I work for. However, we will have to reassess these orders as well.

  Thanks for listening/reading my rants, and I hope that others have had better luck I have.

  Michele

  Hi Michele Riley,

  Please this post in the forum for more quick help customer care.

  http://en.community.Dell.com/support-forums/customercare/

• Meeting place for Dell 11 I3 pro locks screen (7139/7130) towards the top/gels

  Hello

  I have a Dell location 11 Pro I3, it's almost awesome to work after getting all the latest drivers updates, Bios, etc..

  But from time to time, the screen freezes, it seems that it only freezes when im touching the screen or using the keyboard on this (compact keyboard with trackpad).

  A few times the screen freezes for a few seconds, other times I have to put to sleep (power button) and wake up again until the screen reacts.

  I know it is a problem of editing screen, the Tablet meets the keys, keyboard typing or the trackpad when the screen is frozen.

  How will I know it when I see the movements on the screen? I see when I wake the Tablet after a freeze of all the changes I made, for example typings, Web sites change. And the sounds when I get error sound when I arrive at the end of a page, etc. The sounds come while the screen is frozen.

  Anyone have any idea how I can solve the freezing of the screen that would be amazing :)

  I've seen other posts but non of them are recent (a month or two old)

  Thanks in advance :)

  On my tablet, this problem was more caused by the Panel Auto Refresh. Download Intel drivers from the support page and install it if you don't have it already done. Then, click Start-> all-> Intel HD Graphics Control Panel Apps. Click on 'Power', then click on "Off" next to Panel to refresh.

• End of drain battery Dell place 11 Pro

  I had been post in a different thread display freezing, but I tell myself that it is a different question although it may appear on the screen that is draining the battery.

  So, here's my problem.  Whenever I leave my coming Pro 11 i5/128 GB/64-bit/Office 2013 go to sleep (power button / stop, timeout or close the lid on my mobile keyboard), it seems that the system goes to sleep - screen goes black.  However, when I open it up, I finally see that the 3 to 6% per hour battery is drained. This seems too much.  If I turn off the power instead, near 0% is depleted by next time.

  I started with the affichage.3316 driver and I tried to upgrade vers.3345, but it doesn't seem to help.  I also checked the BIOS - "A05".  I am more that willing to run some test is necessary to diagnose, but not sure what to try.  Here's a 'powercfg /sleepstudy' newest sleep cycle.  As you can see, the family Intel Graphics device is 100% active during a connected sleep cycle.

  Also, I noticed that sometimes, the fan turns on when he's asleep - I know that this thing can be power hungry.  Can anyone help?

  

  Okay, maybe to something. I have the latest version of the O2 Micro installed driver that retains its identity in the Device Manager. This is the version 3.0.8.34 A03 (Dell driver #4Y1R8). This driver is installed instead of the "SDA Standard compatible SD Host Controller" which is under "Intel (r) 8 series PCI Express Root Port #4-9 C 16".» The controller will now appear in "Storage controllers" category as "controller of BayHubTech/O2Micro Integrated MMC/SD", and my SD card shows as a "SD SCSI Disk Device' in this.

  The performance of the Audio driver may or may not be related, so I'll include the fact that I unpakaged the latest driver Realtek HD Audio 6.0.17399 A03 (47P 33) manually using 7 - zip as it was the only way he would unpack the actual driver files and install correctly. So I mentioned SD card driver above installed as well as the latest Audio drivers installed. The new audio drivers run processes less and less startup item, which certainly can't hurt things.

  I stopped the O2FLASH service and set its startup type to manual (for disabled people is probably fine too). I'm not sure it makes a difference, but I don't see that it does not seem to affect the operation of the SD card at all.

  The first test shows that the percentage of low power HW State is now of the order of 98% for the first time in my history of sleep study! All others are virtually zero. I just ran it for 20 minutes connected standby, but it is a great result! I'll let it run for long standby periods and let you know how it goes.

  If you can or can not duplicate these results please let me know. There may be other factors in how I configured the computer that could play into it. However the changes I mentioned are those I've done between sessions on standby with status of low power 0% and now 98% material. I'm cautiously optimistic! :-)

• Microsoft Office for Dell place 8 Android Tablet?

  I am looking to buy an Android Tablet and am interested in the Tablet 32 GB from Dell place 8. My only problem is, I can't find if it comes with Microsoft Office? If this is not the case, can be installed. If this isn't the case, nobody knows any Android tablets that can be used with Microsoft Offices. Android is a must if. Thank you!

  Office for Android is available for devices with Arm chips at this time.  All Dell place tablets running on Intel hardware. An Intel version is supposed to be in the pipeline.

• Dell place 8 Pro 3G - Sleep / Wake Up questions

  Hello

  A few days ago I bought the Dell coming Pro 8 3 G tablet. I have all available Windows Updates, latest drivers and BIOS of 'My Dell'. Unfortunately, my Tablet has some problems with the mode 'sleep'.

  1. only the 'Stop' and 'Restart' options are available in the drop-down list on 'Power' in the charming bar. 'Sleep' is not available and I can not turn off the screen by pressing the power button / stop on the right side of the tablet. I did a few tests using the powercfg command-line tool and I found, the driver mobile (or hardware) prevents the past in standby mode: if I disable the driver, I can put my device in mode 'sleep' without any problem.

  Mobile broadband driver:

  Dell 5570e Wireless HSPA + (42mbps network) Mobile Broadband Card #4
  Date: July 9, 2014
  Version: 14.7.1050.64

  2. to wake up to the top of the device to sleep mode does not work if you do this after the first 10 seconds in mode 'sleep'.

  When I disable WiFi driver in Device Manager, clock works well, even a few hours after the mode 'sleep' was launched.

  WiFi pilot:

  Dell 1538 wireless 802.11 a/g/n adapter.
  Date: July 4, 2014
  Version: 3.7.2.59655

  I don't know if these questions are based on the hardware or driver/software based.

  Everyone knows about similar problems?

  Kind regards

  Dominik

  Hello, I had the same problem and I tried all drivers update possible solution (reformatting my Tablet 6 times), the update of windows files, etc... Nothing helps. In the end, I found a similar problem for a Dell location 11 Pro user who suggests to turn off the TPM and Bitlocker. As soon as I disabled it Win8 table bitlocker and TPM/Bitlocker from the Bios (Secure boot - disabled), the Tablet began to wake from sleep with no problems... it's been 1 week now and it has not failed once (it allows to get a black 3 - 4 times per day before the change of the screen).

• Reference Dell place 11 Pro - can it work without battery, with power supply connected?

  Dell coming 11 Pro can be used without battery, with power connected?

  Yes, works perfectly on AC only.   Keep in mind that if you have a sudden loss of power that you might have some issues such as loss of data, corruption of data, etc..    As if you lost power on a laptop (without battery) or a desktop computer.

• Impossible to install new BIOS A09 for Dell place Pro 7130

  Validated that I use the correct Bios... :-)

  Scenarios:

  Downloaded the new Bios and run, install rises and tells me it will be need for power, etc. and install works. Reboot the machine it always is on A06

  Since the Bios flash tool and installation runs very quickly and send back me to Windows 8 and is stil on A06

  What should do?

  Question side: is there something speciel set in the bios on the boot. Since I reset the default Bios (A06) I been bugged with problems of departure?

  I can verify that the solution posted by Stone3t worked for me (unplug the battery CMOS).  Too bad, that it requires disassembly of the rear housing which may be too advanced for the average user.

  I had all the symptoms / problems described by posts all on sites of Dell, as well as other: unable to update BIOS, unit will not sleep, etc. Corrupt ME was key. (Intel Management Engine Firmware)  Stupid thing is: he has been altered through updates of Dell.

  Calling the depot repair, or any other Dell support (and 5 + times transferred, pending on hold for hours) has been completely useless as they refused to help because my camera was "out of warranty" Although some had mentioned there was a recall on this issue.

  I am now updated to A15 and through all windows updates and everything seems to be working again.  No, thanks to the support of Dell who refuse to share the answer.

  I not buy all Dell Mobile devices in the near future.

• Tablet keyboard for Dell place Pro 11 already dead...

  Not sure if it of just a bad keyboard or not, but my keyboard Tablet (not that thin) does not at all.  I tried to restart the computer, disconnect and reconnect the keyboard.  I get no response at all.  Anyone else have this problem or know what's happening?

  So I got a support decision-making and they got running again. I thought for sure that my keyboard has gone wrong. Fortunately, I was wrong.  I have not had problems since. Basically they updated the touch panel drivers, drivers of the chipset and bios. After a few reboots everything worked like a charm.  You can find these drivers on the dell support page. Let us know of this assistance on your.

• Reference Dell place 11 Pro 7130

  Hello

  I recently buy the renovated site of Dell pro 7130.

  The Tablet is absolutely fine and works very well it was preloaded windows 8.1 pro version.

  But in this tablet, my camera does not work when I start windows's default camera app that it says please connect your camera. See nothing in Device Manager, I tried to manually switch the unit Imaging section but failed each time, I haven't updated all the latest drivers from Dell still no luck, also check that the camera is turned on in the BIOS.

  Can anyone please help and give me the driver for this device. or doe which means my camera died completely?

  Hello

  I have EXACTLY the same problem AND I tried EXACTLY the same things you did... you found a solution to this problem?

• Reference Dell place 8 pro and 3g mobile hotspot

  Hey dell community.

  I have a place of reference dell 8 pro and I tried to get my Tablet for work with the mobile hotspot!

  When I plugged it it will say limited.

  None fixes please?

  Bobby Burgess

  Hi Bobby,.

  I found this thread on the venue Pro 8 and of connection to wireless networks / hot spots.  Try the suggestion in this thread and see if it helps.

  NOTE: I copied on the steps of resolution here as well in case anyone wants to see it.

  When sometimes, I had this problem, a deep discharge set: with power supply not connected, press the button of the Tablet for 30 or 60 seconds, including after the Tablet died;  Let the Tablet turned off for 2 minutes; and restart.  Have been informed by Support technique Dell that the cause is a buildup of static electricity, which avoids deep discharge.

  Todd

• Reference Dell place 11 Pro and Dock

  Hi all

  I have a Dell coming Pro 7130 11 and the docking station. I can't have an external display to work using the HDMI port or display connectors. I have 2 Dell E198WFP (1440 x 900), the two connecting using DVI inputs. Display sometimes appears, but does not have the resolution or refresh rate tries to run at 75 Hz despite being set at 60 Hz

  AFAIK drivers etc are all up to this date, the tablet can connect to an external monitor using the construction to the mini HDMI port without problem?

  Any suggestions, anyone please?

  Hi, the dock rarely works for me... the workaround I found is to unplug power dock and plug back in. (works 95% of the time, I get the monitor like that). It is with the 7130 model.