Unexpcted the system restore error

Similar Questions

• Execution on the system restore error

  Hi, I have a problem with my PC and tried to do a system restore, but I get the following error when I try: "Microsoft Visual C++ Runtime Library." This application has requested the execution to terminate in an unusual way. Please contact support for the application for more information. "I have Windows Vista.  I tried to do a restore of the system Safe Mode, nothing works. Help, please. Thank you!

  Hello

  · What is the reason to perform the system restore?

  Try the methods and check them off below if it helps:

  Method 1:

  Try to restore the computer to a different date and check the results.

  Method 2:

  Download Microsoft Visual C++ 2010 redistributable and install the same.

  You can download from the link below: Package redistributable Microsoft Visual C++ 2010 (x 64): http://www.microsoft.com/downloads/en/details.aspx?FamilyID=bd512d9e-43c8-4655-81bf-9350143d5867

• System Restore error: 0 x 80070571

  Separated from this thread.

  Judge that the method and the computer has stagnated at 28% more than an hour until I hard out there. Is there another way to fix the disc? The Base filtering engine does not also some other dependent process making it useless for example Firewall, internet connectivity

  Hi George,.

  Welcome to the Microsoft community.

  According to the query, you get the system restore error: 0 x 80070571 when you tried to perform a check disk (Chkdsk).

  To help solve your problem better, could you give us the following information?

  1. Why you try to run Chkdsk? Are you facing performance issues?
  2. You get an error code when running Chkdsk?

  This is perhaps due to the corruption of user account or corrupt file system or any software of third-party programs.

  I suggest to create a new user account and then try to perform a system restore.

  See the following Microsoft support article to create a new user account and check if it helps.

  http://Windows.Microsoft.com/en-us/Windows/create-user-account#create-user-account=Windows-8

  It would also be useful if you we post the logs in Event Viewer to analyze and solve the problem better.

  Try these steps and let us know the results for assistance.

  Thank you

• Get failure catastrophic error when running the system restore

  Original title: System Restore

  When I try to use the system restore I get a message syaying that system restore did not complete - this error 0 x 80070057 and he SIAS catastrophic failure

  Anyone knoe what to do to fix?

  Thank you

  Maggie

  Hello

  I suggest you to follow the steps in this link and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/system-restore-error-0x80070057/0b8c7c81-3fe9-4D43-8369-1a41a5756171

  It will be useful.

• Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: I get the 0x80073AFC error code when I try to use the system restore then, how can I find and replace this file missing MUI?

  • I am running Windows 7 for packs SP 1 or SP 2 does NOT solve my problem since neither one works with Windows 7.  Is there a way to search for this MUI (Multiple User Interface) missing file? The every thing must have himself installed in the first place. I took my mom (she died in June) and my brother on this PC as users so even if they do not use this PC supports multiple users. Maybe if I deleted as a reboot and additional users it will solve my problems. My updates install OK but I can't run at all system restore. It creates a restoration point OK but when I try to sr back to a restore point before I get the error 0x80073AFC topic of the missing MUI file. Then, when I spear SR it is said that he could not and no files have been changed because of the error 0x8000FFFF error, unspecified catastrophic failure and could not retrieve the file several times when system restore is attempted.

    I'm running Windows 7 on a HP Pavilion with browser Firefox 3.6.8 browser Opera 10.60, IE8 and Google Chrome 5.0.375.125 browser browser.

    Can you tell me what I try next? Thnks a lot and sayonara for now the guy-Jack McElwee / keimanzero the Scion of the Anime in Brookhaven PA - USA

    OK I tried everything and nothing works! Only added beginners are updated browser Opera 10.63; IE9 (Beta); Firefox 3.6.12 and Google Chrome 7.0.517.41 and Java 22. Of course like everyone else in the world, I had to uninstall/enable and disable/download again and reinstall new Adobe Flash 10 and 11 of the shock wave and they keep crashing too! Hello 4 keep screwing browsers and now I get connection network problems. I run Comcast doctor and did everything it said to do, but nothing works. Oh and I added 7-Zip and WinZip also. Likewise, they will not work! Help! Thanks - K & K

  keimanzero,

  Comcast of Norton Security Suite version is installed? If Yes, who and perhaps malware is most likely to cause questions you have published, in particular the failure of the restoration of the system.
  First, configure the system to boot - How to solve a problem by performing a boot in Windows Vista or in Windows 7
  NOTE: Start-up mode minimum state all the 3rd party firewalls will be disabled. Open Control Panel > Windows Firewall to make sure that the native firewall of Windows 7 is now on.

  Download and Save the update system (or CheckSUR) tool. You will need to download the specific Version of CheckSUR corresponding to the architecture of the system to Windows 7. If you do not know the architecture of the system, and then click the link that says "Click here to show or hide the instructions step by step with images" under method 2: download the update directly system preparation tool from Microsoft Download Center .
  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  Once the download is complete, close all open programs and browsers. Now, run CheckSUR with the system connected to the internet because it will download the .cab for system files. Reboot once CheckSUR is complete.

  Secondly, I suggest that you run the File Checker system while in the same clean boot state.
  To run the System File Checker tool, follow these steps:

  1. Click Start and type cmd in the field search programs and files .
  2. Right click on cmd.exe in the programs of list, and then choose 'run as administrator '.
     If you are prompted for an administrator password or a confirmation, type your password or click on continue.
  3. At the command prompt, enter the following line exactly as written including the space between thec and the/and then press ENTER:
     sfc/scannow

  When the analysis is complete, test to see if the problems facing the system have been resolved.

  If they are not, you will need to contact Norton support for the version of Norton Internet Security Comcast to get help, or just uninstall NIS, run the Norton removal tool (right click Norton_Removal_Tool.exe, choose "Run as Administrator"), reboot and then check to see if the problems are still occurring.

  Expert MowGreen Windows IT Pro - consumer safety

• XP hang on to the restoration of the system during installation error: no changes have been made to your computer to choose another restore point restart the system restore

  Original title: XP hang up to the restoration of the system during the installation

  During the configuration of the system in the process of getting XP to hung up on the screen of the system restore

  The message says:
  No changes have been made to your computer
  To choose another restore point, restart System Restore
  To restart System Restore, click Home
  The jury of the mouse and the button doesn't work so I can't click Home tab
  Help

  Hello

  Why you try to run the system restore?

  Step 1: Check if you are able to complete the restore of the system in safe mode.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

  For more information, please see the following article.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

• whenever I get the error message and I can not get the system restore or the automatic updates touch

  whenever I try to use the system restore I get the message that it was impossible to restore to dat what I ever try to restore any file were change

  more my automatic updates keep coming up it downloads according to the full upgrade, then the icon disappears, then comes back and he wants

  upgrading again any suggestions

  Hi chuckdutton,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. What is the reason for the execution of the system restore on the computer?

  4. do you have security software installed on the computer?

  5. you receive similar message appears when you try with different restore points?

  There are various reasons for the system restore fail on the computer.

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  Also see the article below and check if it helps.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Refer to the article below and try the steps mentioned, check if that fixes windows update icons that appear on the system tray.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

  http://support.Microsoft.com/kb/910339

• System Restore error: "the changes to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»

  I had some problems with my computer recently I knew could be solved with the system restore.  Then I went into system restore and went to a restore point that was a few weeks back.  After I clicked on it and pressing the ok button, the following message appeared: "the changes made to the G: drive after this point cannot be reversed, because the drive has been either excluded from monitoring system restore or has been disabled or deleted.»  I let it continue and do the restore.  My computer has rebooted and came up with an error in system restore that says restore failed.  It's the same thing with other restore points.  I don't know why I get this error because I not made any changes to this hard drive except for copy of a document word on him.  I thought that the System Restore monitors removable disks.  Anyone know what is happening here and how I can get the restoration of the system to operate without the mistakes to come?

  I have Norton.  Disable the Tamper Protection works.  I also noticed that since the G: drive was a portable hard drive, System Restore wanted to exercise oversight.  He wants to monitor all hard drives.  Turn on external and portable hard disks prevents tracking system restore changes to the readers.  I don't think anyone would have the system restore review external drives anyway.  It is not necessary.

• I received the error message: 0x0000ffff after running the system restore

  Original title: 0x0000ffff

  has run the system restore and got this error code. How should I do?

  Hello

  could a. you give the error message as well?
  b. are you try to create a system restore point or restore the computer to a previous state?

  c. Why do you try to restore the computer to a previous state?

  We can try the following methods and check.

  Method 1.
  Disable the security software and then try to run the system restore and verify.

  Method 2.

  Let us run restore the system from the command prompt and check. Follow the steps described in the article below to get there.

  Start the restore of the system from a command prompt
  http://Windows.Microsoft.com/en-us/Windows7/start-System-Restore-from-a-command-prompt

  Method 3.

  I also advise to use the boot minimum troubleshooting to find the conflicting program.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  You can also consult the methods listed in the section below to learn more.

  No restore points are available when you use Windows Vista, Windows 7 or Windows Server 2008 operating system in a dual-boot with an earlier Windows operating system configuration
  http://support.Microsoft.com/kb/926185

  System Restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• The system restore failed. Error message (unspecified error occurred during restore).

  The system restore failed.  Error message (unspecified error occurred during restore).  I am running Windows Vista Home Premium.  I uninstalled Mcafee Security Suite and System Mechanic 9 which are the security only packages I have.  After uninstalling the above, I tried several points with restore the with the same results.  Any ideas?

  Nortonn, McAfee etc often stops system restore:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Run more high tool ot remove all McAfee.

  1. try SR in safe mode:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  2 Malware will stop at the system restore:

  If necessary, do all the work Safe Mode with network.

   

  To get into Safe Mode with network, press F8 at the Power On / boot and use key arrow upward to get into SafeMode with networking from the list of options, and then press ENTER.

  http://www.Malwarebytes.org/MBAM.php

  Malwarebytes is as its name suggests, a Malware Remover!

  Download the free Version from the link above.

  Download, install, upgrade and scan once a fortnight.

  See you soon.

  Mick Murphy - Microsoft partner

• After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  After many attempts computer will not allow the system restore. Received message is... Unspecified error occurred restoring the system durning

  Hello

  If you use Norton, which could interfere with the restoration of the system.

  Disable Norton while doing your system restore.

  See you soon.

• I can't access the 0x8004230F system restore error code

  My computer started to really slow down while I was getting ready to go to the system restore to go to an earlier date when it worked fine, but I get an error code

  0x8004230F. it doesn't let me create a restore point, or access previous restore points. Thanks for any help I could get on it.
  Laptop Toshiba running Vista 32

  Hello

  Malware will interfere with restoration of the system to try to remove yourself from this way

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/products/malwarebytes_free

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  _________________________________________________________________

  other reasons for problems with system restore;

  Norton and Norton product Tamper Protection is the main

  Read about it:

  http://us.Norton.com/support/kb/web_view.jsp?wv_type=public_web&docURL=20101101224849EN&LN=en_US

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  You can try restoring the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• In Vista, doing the system restore, get error "unspecified error occurred when using System Restore.

  My system restore keeps coming back with the error, unspecified error occurred when using System Restore. Cannot change files. Also, after that I am unable to use my avast antivirus. All the sheilds on my Avast are lost. I; m not computer saavy so please help me

  Hello

  You can be infected with the Malware

  malware stops normally you use the system restore protect themselves remove you

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If not, try Safe Mode do a system restore

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• Error 'System restore running system' starts with a black cursor screen while trying to use the system restore

  Original title: unit hanging in the middle of the restoration of the system

  Message "System restore running system" starts with a black screen with cursor, but does not move forward.  Windows Vista question

  Have you tried F8 solutions and when I select the system restore it gives me the message above and goes to the black screen even ugly.

  How did I break the loop so I can start a new system restore?

  Hello

  Are you trying to restore your computer or you try to create a restore point?

  Step 1 or 2 can help you to restore your computer.

  Step 1: Try the steps in the section below, if you haven't tried it.

  Start the restore of the system from a command prompt
  http://Windows.Microsoft.com/en-us/Windows-Vista/Start-System-Restore-from-a-command-prompt

  Step 2: Try restoring the system from the recovery console.
  Reference: http://windows.microsoft.com/en-US/windows-vista/What-are-the-system-recovery-options-in-Windows-Vista

  Step 3: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Measures to check the application event log:

  a. Click Start.
  (b) in the search box type eventvwr.msc, and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows-Vista/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Similar problem: http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/system-restore-wizard-is-already-running/c797baf7-c069-4e3a-894a-e9644cc6df0b

• System Restore error: tried all solutions in the posted forums. Halp?

  Halp me please :(

  Norton anti-virus Malwarebytes and Kaspersky TDSSKiller found some unpleasant things on my computer last night, and after having tried to delete/quarantine unpleasant things and reboot, Vista is now impossible to load beyond the screen "Please Wait..."/Welcome. I let it sit for about 5 minutes solid, then the screen blurs and I'm stuck.

  I can boot into Safe Mode with network (as well as all other security mode), so I tried to do a system restore, but nothing helped. I have been searching forums literally ALL THAT DAY and we tried ALL the tips and solutions of publication.

  "ERROR: System Restore failed due to an unspecified error." The setting is incorrect (0 x 80070057). »

  1 Norton is off and I'm in Mode safe

  2. I have run the sfc/scannow command and told me "Windows Resource Protection found corrupt files but was unable to solve some of them."

  3. I have run the command chkdsk and told me "errors found. Chkdsk cannot continue in read-only mode"and"Chkdsk cannot run because the volume is in use by another process.

  4. I tried selecting the option "Repair my computer" in the start menu advanced, but when I go to sign in, it says my username or password is incorrect. Impossible! Impossible to overtake this dialog box, I have to restart the computer using safe mode.

  5. I tried to boot from the last good known as well and it takes me still on the screen "Please Wait..."/Welcome of death...

  An additional note: when you use Google in Mode safe mode, I tried to visit a legitimate forum link and was redirected to a spam site. When I tried to hit the back button, it's as if he wouldn't let me leave, constantly asking me if "I knew? This seems to be a kind of virus-y thing. I thought that Safe Mode was safe? My virus problems would be bad enough that even the Safe Mode is infected? Sad :(

  I'd really appreciate some feedback. The other just posted solutions do not work for me.

  Thank you very much!

  A virus that has infected operating system files or program files can be active in safe mode.

  Here are a few things to try:

  1. Because your computer has Norton Antivirus, you should disable Norton product Tamper Protection before you run the system restore.  This is not the same thing to disable Norton Antivirus.
  2. Demarrer start from a Windows Vista installation disc, select repair your computer and run System Restore from the System Recovery Options menu.

  Boulder computer Maven
  Most Microsoft Valuable Professional