Many docking stations access connections?

Similar Questions

• HP EliteBook 8570w: is it possible to run two monitors on a 8570w without a docking station.

  Is it possible to run two monitors on a 8570w without a docking station. Connect a monitor to the VGA port and the other to display port.

  I was able to get this to work. My 8570w has an Amd over-pants 7700, don't know if that matters. One is connected VGA other Displayport. The port monitor must have a custom resolution defined in the over-pants Control Panel. except that it works perfectly. More laptop screen no. Docking Station 2 24 inch Dell.

  And thanks for the quick reply Provost.

• X 60/X 61 does not start in docking stations

  Hello world

  I just got another strange problem: two laptop computers (X 60 and X 61) are not
  Boot (Win XP) in their docking stations: after the XP Logo screen display

  stays black and there is no activity on the HDD (I waited for approximately

  30 min); I also tried to start inside without a docking station
  LAN connected cable, but it also did not work.

  If you disconnect the laptop and start them out docking stations they
  startup (Win XP) fine. When the logon screen is displayed that you can put back them
  in docking stations and work with them as usual without any problems.

  Is there a special driver to be installed or what should I do?

  

  Thank you
  Loathar

  (1) starting the laptop outside the mooring station, plug it in before logon

  (2) download the latest "Intel Matrix Storage Driver" and extract it
  to a new folder

  (3) open the - Device Manager and goto the "IDE" or the "storage"-controller, "".
  Select your SATA controller and click on the 'pilot' - button.
  Finally select the folder of destination (2) update the driver.

  (4) restart the system, check the BIOS for "SATA = AHCI"-framework and everything ".
  should be good.

  ---> Install this driver via 'update-system' not always seems to work fine!

• Automatically use the wired on wireless LAN connection when using the docking station

  Hey guys!

  I use the my T500 with the Advanced Mini Dock @TheDude recommended in this thread: http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T500-Recommended-Compatible-Docking-Station...

  I had almost a month now, and whenever I anchor my laptop I have to pass the connection wireless switch off hard or using FN + F5 and extinguish this particular radio.

  Is it possible to have the computer automatically choose the wired connection when it is available, otherwise use the wireless radio?

  I use Windows 7 Prof 64 bit.

  Thank you

  c1p0

  ThinkVantage Access Connections (AC) can be configured to do this. Change your location profile and change the order of the adapter associated with this place, for example, order first as Wired and Wireless second.

  When I am connected Wired and I pull the Ethernet cable, AC will switch to using wireless automatically. When I put the Ethernet back in, it starts automatically by using the wired and wireless don't report limited or no connectivity (which means that the switch has occurred). You will have to perhaps set up wireless in AC power options, i.e. disable radio when not in use (I did not sentence again).

  This could be similar to a docking station solution. Mine is without docking station; When I'm at the office and go to a meeting, I pull the wire and have continuity.

  Ideally, the CA should provide a solution. But it may take some fiddling.

• Dial-up connections - turn off WiFi on Wired connect with docking station

  Question: Do auto switch without Wired WiFi user interaction and back at Wired.
  Example - user leaves office/docking station with LAN wired to a meeting on WiFi then returned to their office/dock. Laptop can hit "sleep mode" on these steps as well.

  I am mobile Dell to Lenovo and new to AC - so far unsuccessfully disable WiFi on Wired connect. It is a breeze with Intel PROset + "adapter switching" and can be done manually with the Wifi of Dell drivers ('disable on Wired connect'). I assumed that Thinkvantage Access Conentions would be actually more robust than these. Should we simply use PROset even if it is not supplied with systems or is available for download for Lenovo T-Series? PROset method - http://www.intel.com/support/wireless/wlan/sb/CS-028815.htm

  Work to achieve this goal as a policy managed for multiple computers. AC is superb, but wish it had this parameter as Intel PROset.

  Link to photo

  Note of the moderator; image (s) for a total of > 50 K converted for the programming of the Forum rules

  Hi Tpad - rex, welcome to the forums,

  Please take a look in the settings of the profile in the dial-up connections. (Select the profile and choose Edit profile). In the profile, you must have two maps showing; LAN and WLAN, make sure that the LAN exceed the WLAN in the priority list. I'm guessing you got it the other way around, you may set up there in a WLAN connection first?

• MacBook Air for Docking Station connection problem

  I am trying to connect a MacBook Air to another monitor via a Kensington docking station, but they do not communicate. The additional monitor is sent immediately to sleep. If I connect Air to the monitor directly everything works fine, but I want to simplify my life with the docking station. Anyone have any ideas?

  Well, I understood the question. It seems that the original DisplayLink software I was using was not correct. After connecting with Kensington, they gave me info on a new beta driver and it works fine.

• HP ZBook 15 G3: BSOD when connecting to the HP Elite Thunderbolt 3 docking station

  I recently (yesterday, 16/08/16) began to experience the dreaded Blue Screen of Death, whenever my laptop is connected to my HP Elite Thunderbolt 3 Dock.

  The machine is a HP ZBook 15 G3. It was connected to the docking station for more than a month without this problem. I don't know why at the time because I don't remember any updates or new software before that happens.

  The dock is connected to 2 x monitors via HDMI cables and an ethernet cable. I connect a mouse and wireless keyboard to a USB3 port on the laptop.

  If the dock is connected to the laptop at the start, he reached the login screen front of BSOD. If I start without it connected, it will be BSOD a few seconds after connecting the dock. He never to the point where the monitors display anything. It can be started with the dock connected in Safe Mode, as it seems to disable job.

  I've updated all the drivers and BIOS (including download the Softpaq Download Manager), but there has been no change. I have also updated the NVIDIA drivers to the latest version without change.

  What should I do next to solve the problem?

  Did you analyze the dump files, they said?

  I would also like to update these:

  Intel's Thunderbolt sure Connect utility (15.3.40.275)
  Thunderbolt from Intel for the Dock Thunderbolt from HP (16.1.7.0.8) Firmware update
  ASMedia eXtensible Host Controller Driver (1.16.35.1)
  ASMedia ASM1042A Firmware Update for HP Thunderbolt 3 Dock (131025.10.11.23)

  More BIOS if you're not on 1.09 or 1.10, some people say that they have problems with 1.10, so maybe try downgrade to 1.09.

  You can also try experimenting with the 'Thunderbolt security level' setting in the bios security switching No. If it is authorized by the user, or vice versa.

• Tecra 9100: Installation of the printer with docking station connected

  I have a Tecra 9100 with a docking station that run under WIN - XP SP1. Trying to install my printer, an Epson 740 with USB connection, I found that I need to create 2 entries for the same printer, 1 environmental off-STATION and 1 for MOORING environment, known as the XXX (1 copy). Is this normal or have I done something wrong.

  This is different from my old Portege that keeps the 2 hardware profiles, 1 connected uindocked and 1, and there is only 1 entry in the Printers folder.

  Also, if I unplugged the printer from the docking station and later taking again on another USB port,
  He will ask reinstall me the printer again.

  Thanks for any comments from anyone.

  I have Tecra M1 and use it on the same port replicator as you have your 9100. The same happen to me if I want to use the webcam on different USB ports. Use it on the same there is no message but using the second port he asks the driver.

  It seems to be normal. :)

• Is it possible to connect the Qosmio F60 - L10 with a docking station?

  Hello

  is it possible to connect the F60 - L10 with a docking station? I would to connect to the docking station, a monitor and a peripheral such as a printer and a LAN cable.

  Thank you.

  Hello

  You cannot connect Qosmio for docking station because Qosmio includes not all ports docking at the bottom of the unit. Have you seen one?

  But you can buy a [Dynadock | http://eu.computers.toshiba-europe.com/innovation/generic/Dynadock_EMEA_0107/cnt/GENERIC/key/Dynadock_EMEA_0107/banner_id/Q3_DYNADOCK_SM_TEG_0107] Toshiba.

  The Dynadock can be connected to computer laptop s USB port.
  Google a bit for Dynadock. There are different models on the market

  Welcome them

• Two external monitors can be connected to the docking station?

  Is it possible to connect two external monitors to a docking of HP 2740? If so, how it is with 1 single VGA port on the docking station. The tablet which is embodied is a HP Elitebook 2760P.

  Yes, you got that right.

  He landed again until what's available / condition on the 2nd external monitor. These days most of them VGA, HDMI and DVI while that few of them have display port too.

• can I connect a 5s to a docking station with a Flash 30 adapter to play music with a sound system

  How to connect an iphone 5 s to a docking station that is connected to a sound system to listen to music. Tried with a lightning 30-pin adapter. Sound does not play through the speakers. This method works with my new ipod, but not with the phone.

  Duh. It was too complex. Docking station disconnected and plugged the cord on the plug headphones. Problem solved. But still think that the card should work.

• T410 does not connect to the docking station

  I have a Lenovo T410 and a docking station 4338. When I tried to join the computer to the docking station last night, he would not go. I don't see any obstruction or something wrong with the plug on each unit; the computer can't accumulate up as before.

  I have another station host I can try, which should help to determine which device is the problem, but I won't have access to him until next week.

  Have someone has encountered a problem like this? Any suggestions to correct?

  I compared the two docking stations and identified the problem. There are two plastic hooks built into the base, one to the right of the connector, one left and below. In a station works correctly these hooks are discarded because the computer is inserted, then spring back, now in place.

  On my post of malfunction the hooks were stuck, prevent the computer from insertion.

  I was able to fix the problem by pushing hooks with my finger, which take them off. If they stick once again I can try a Lube graphite.

• When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  When using the docking station when my laptop can connect USB. printer, etc... ? I know that I can connect my laptop to a docking station.

  Hello

  With Docking Station, you can connect all the cables for printer, keyboard and mouse, adapter directly to the charging station.

  So whenever you use a laptop, you have just dock the laptop on the docking station and not need to re connect all cables again.

  This will help you when you move frequently with the laptop.

  Docking station will save your time, outside any other aspect, that it has to offer.

  Zaki.

• 2 docking stations connectable to laptop at the same time without crashing my Windows Vista Business?

  I am a 67-year-old educator specialized for 10 children with special needs.  Eelle have degrees of autism and require very individualized changes of their standardized curriculum class in public schools.  My laptop was purchased in 2007, and while she is an old lady like me, she is reliable, powerful and small enough horse for me to work on the fly... I just want to her top in order to exploit one of my docking stations or both at the same time...

  Gateway model C-5815 notebook convertible; touchscreen navigation or Penabled; Intel Centrino Core 2 Duo processor; U 7500 1.06 GHZ GHZ 1.07; 4 GB RAM 32-bit operating system. Windows Vista Business... AND ONLY 2 USB PORTS from where I work, 2 external hard drives, 2 printers; 2 scanners; 1 external TV/monitor, 1 keyboard, 1 ball control, external speakers and sinc various gps units, Ipods, cell phones, etc etc etc...  I did all this by the docking station to a generic port Targus 3 unit and an extension of USB Belkin 7port...

  UPDATE  Mahalo for anyone who has tried to help me with this question... I read everything that was recommended, but nothing has addressed this issue directly. In the end, I just bit the bullett and both plugged to my laptop... She has chewed on everything what adding new material for some time, but then she moved and purred... I even tried plugging and unplugging does material of a docking, and still she purred...  Mahalo to look at the problem (not) with me... Apparently the business Windows Vista is quite difficult to adapt to both stations and host at the same time...

  Hi Susan,.

  I can tell you to check out this link, I'm sure you'll find a useful link.

  https://www.google.com/#hl=en&output=search&sclient=psy-ab&q=how+can+i+connect+my+docking+station+to+Windows+ehow&oq=how+can+i+connect+my+docking+station+to+Windows+ehow&aq=f&aqi=&aql=&gs_l=hp.3...456.11746.0.12146.54.33.0.0.0.1.1361.9466.3-3j1j0j2j5.11.0...0.0.jVAoex9_uGc&pbx=1&bav=on.2,or.r_gc.r_pw.r_cp.r_qf.,cf.osb&fp=1ddfc57b13f7bd6e&biw=1249&bih=565

• How to connect 2 Dell U2415 monitor on the docking station in combination with a Dell Latitude E7450 processor and controller

  Hi guys

  hope you can help me out here. I plan to buy some E7450 processor and controller of Dell's Latitude for our company with a docking station and some Dell Ultra Sharp 24 monitor - U2415. Aims to use the E7450 processor and controller with the dockinstation and connect 2 monitors U2415 of Dell. the issue here is. What type of cable do I need? should I buy 2 normal display port cables? It resolution things to work with this combination?

  Here the link of the monitor

  http://Accessories.AP.Dell.com/SNA/ProductDetail.aspx?c=HK&CS=hkdhs1&l=en&s=DHS&SKU=391-BBUW&redirect=1

  here some specifications of the dell Notebook printer

  Fix. You can also ask users on the laptop Video board on the platforms they use.