Mapping of VPN XP problem - error 53

Similar Questions

• Could not map drive network - network 0x800704cf error

  I recently accidently deleted a Microsoft Virtual WiFi Miniport card in my list of adapter and he did a bit of problems.

  The biggest, one I'd like to solve is no longer the possibility to connect to my NAS (more precisely a WD my book World Edition 1 TB).
  After I deleted the adapter, when I would try to access the files on the NAS, it seems that the connection did not exist. I decided to try to remove the connection and re - map the network drive. When he wouldn't let me, I found an online solution to get rid of it that involved deleting a registry key (somewhere in the HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\LanmanServer\ key). This has solved the problem of the non-existent connection, but now I can't remap the drive.
  When I try to re - map, I get a network error message that says "Windows cannot access [NAS IP] error Code: 0x800704cf.
  I checked the IP address is correct that the other computers in the House can still connect to it.
  Windows 7 Home Premium 64 bit SP1.

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

  Hope this information helps.

• With tunnel VPN ASA5505 problem

  The business needs is for a VLAN again on site to go directly back to an internet service to site B.

  Site A and B are connected by a service of WES MB 100.

  A site is a site of campus with about 25 switches. Him become VLAN on the site is for the engineer access only, so they can access their companys remote access service. This VLAN must stay back so there is very little potential of a trade-off on the live network.

  The solution that I just put in place is to place an ASA5505 as the dhcp server for him VLAN become to Site A. All clients on that VLAN become get a 192.168.100.x address. The external interface on the ASA5505 to Site A is put on the live network to allow a site VPN tunnel to be put in place between the ASA5505 and the Internet - an another ASA5505 firewall

  The Site A ASA5505 was put in place with inside and outside interfaces with the same level of security. 192.168.100.x subnet is exempt from NAT. Traffic is configured to transmit via the interfaces with the same level of security and the tunnel of L2L is coming.

  But I can not all connectivity to the internet from any host on the 192.168.100.x VLAN.

  This is made more complex because the external interfaces on both of the ASA are the corporate network...

  The default route to the Site B ASA5505 is 87.xx.xx.1, the ISP router.

  The Site B ASA5505 connects directly to the ISP router.

  Site has ASA5505

  --------------------

  access-list no. - nat extended ip 192.168.100.0 allow 255.255.255.0 any

  Access access-list ON scope ip 192.168.100.0 allow 255.255.255.0 any

  NAT (inside) - access list 0 no - nat

  Access-Group No. - nat inside interface

  Route outside 0.0.0.0 0.0.0.0 10.0.99.254 1

  Crypto ipsec transform-set AES-256 aes-256-esp esp-sha-hmac

  vpn-traffic 10 crypto card matches the address OUT access

  card crypto vpn-traffic 10 peers set ##Site B IP address #.

  card crypto vpn-traffic 10 game of transformation-AES-256

  vpn-traffic outside crypto map interface

  tunnel-group ##Site B IP address # type ipsec-l2l

  tunnel-group ##Site B IP address # ipsec - attributes

  pre-shared-key *.

  Site B ASA5505

  -------------------

  permit same-security-traffic intra-interface

  access-list no. - nat extended ip 192.168.100.0 allow 255.255.255.240 all

  outside_access_in of access allowed any ip an extended list

  Global (inside) 1 interface

  NAT (inside) - access list 0 no - nat

  NAT (outside) 1 192.168.100.0 255.255.255.0

  Access-Group No. - nat inside interface

  Access-group outside_access_in in interface outside

  Crypto ipsec transform-set AES-256 aes-256-esp esp-sha-hmac

  Crypto ipsec transform-set esp-aes-256 set1, esp-sha-hmac

  card crypto vpn-traffic 10 correspondence address wootton hall

  card crypto vpn-traffic 10 peers set ##Site an IP #.

  crypto-vpn 10 transform-set set1 traffic map

  vpn-traffic outside crypto map interface

  I spent some time on it and really need some advice form experts out there!

  Can you help me to know where I have gone wrong?

  Dan

  There are some parts of the configuration that you have published to that surprise me, such as the assignment of the default route on the inside interface. But these things are not at the heart of your problem. I agree that the core of your problem is probably the sheep access list. If I understand your needs, what you need is 192.168.100.0 is not translated by going to meets B, and is translated by going to the Internet. But your translation says access list never 192.168.100.0 since your access list as another destination:

  access-list no. - nat extended ip 192.168.100.0 allow 255.255.255.0 any

  My suggestion is to rewrite this access list and change the destination of the 'all' to be addresses behind B (LAN to B).

  HTH

  Rick

• IPSec remote VPN with VPN client in error

  Hello

  ASA 5505 configuration is: (installation using ASDM)

  output from the command: 'show running-config '.

  : Saved
  :
  ASA Version 8.2 (5)
  !
  hostname TEST

  Select _ from encrypted password
  _ encrypted passwd
  names of
  !
  interface Ethernet0/0
  switchport access vlan 2
  !
  interface Ethernet0/1
  !
  interface Ethernet0/2
  !
  interface Ethernet0/3
  !
  interface Ethernet0/4
  !
  interface Ethernet0/5
  !
  interface Ethernet0/6
  !
  interface Ethernet0/7
  !
  interface Vlan1
  nameif inside
  security-level 100
  IP 192.168.1.1 255.255.255.0
  !
  interface Vlan2
  nameif outside
  security-level 0
  IP address dhcp setroute
  !
  passive FTP mode
  sap_vpn_splitTunnelAcl list standard access allowed 192.168.1.0 255.255.255.0
  inside_nat0_outbound to access ip 192.168.1.0 scope list allow 255.255.255.0 192.168.10.0 255.255.255.224
  pager lines 24
  asdm of logging of information
  Within 1500 MTU
  Outside 1500 MTU
  IP local pool test_pool 192.168.10.0 - 192.168.10.20 mask 255.255.255.0
  ICMP unreachable rate-limit 1 burst-size 1
  don't allow no asdm history
  ARP timeout 14400
  Global 1 interface (outside)
  NAT (inside) 0-list of access inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  Timeout xlate 03:00
  Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
  Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
  Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
  Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  timeout tcp-proxy-reassembly 0:01:00
  Floating conn timeout 0:00:00
  dynamic-access-policy-registration DfltAccessPolicy
  AAA authentication http LOCAL console
  Enable http server
  http 192.168.1.0 255.255.255.0 inside
  No snmp server location
  No snmp Server contact
  Server enable SNMP traps snmp authentication linkup, linkdown cold start
  Crypto ipsec transform-set esp-SHA-ESP-3DES-3des esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-256-MD5 esp-aes-256 esp-md5-hmac
  Crypto ipsec transform-set ESP-DES-SHA esp - esp-sha-hmac
  Crypto ipsec transform-set ESP-DES-MD5 esp - esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-192-MD5 esp-aes-192 esp-md5-hmac
  Crypto ipsec transform-set ESP-3DES-MD5-esp-3des esp-md5-hmac
  Crypto ipsec transform-set ESP-AES-256-SHA 256 - aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-SHA aes - esp esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-192-SHA esp-aes-192 esp-sha-hmac
  Crypto ipsec transform-set ESP-AES-128-MD5-esp - aes esp-md5-hmac
  life crypto ipsec security association seconds 28800
  Crypto ipsec kilobytes of life - safety 4608000 association
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 pfs Group1 set
  Crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 value transform-set ESP-AES-128-SHA ESP-AES-128-MD5 ESP-AES-192-SHA ESP-AES-192-MD5 ESP-AES-256-SHA ESP-AES-256-MD5 ESP-3DES-SHA MD5-ESP-3DES ESP-DES-SHA ESP-DES-MD5
  outside_map card crypto 65535-isakmp dynamic ipsec SYSTEM_DEFAULT_CRYPTO_MAP
  outside_map interface card crypto outside
  crypto ISAKMP allow outside
  crypto ISAKMP policy 10
  preshared authentication
  3des encryption
  sha hash
  Group 2
  life 86400
  Telnet timeout 5
  SSH timeout 5
  Console timeout 0
  dhcpd outside auto_config
  !
  dhcpd address 192.168.1.5 - 192.168.1.132 inside
  dhcpd allow inside
  !

  a basic threat threat detection
  Statistics-list of access threat detection
  no statistical threat detection tcp-interception
  WebVPN
  internal sap_vpn group policy
  attributes of the strategy of group sap_vpn
  value of server DNS 192.168.2.1
  Protocol-tunnel-VPN IPSec

  
  Split-tunnel-policy tunnelspecified
  value of Split-tunnel-network-list sap_vpn_splitTunnelAcl
  username password encrypted _ privilege 0 test
  username test attributes
  VPN-group-policy sap_vpn
  Username password encrypted _ privilege 15 TEST
  type tunnel-group sap_vpn remote access
  tunnel-group sap_vpn General-attributes
  address test_pool pool
  Group Policy - by default-sap_vpn
  sap_vpn group of tunnel ipsec-attributes
  pre-shared key *.
  !
  class-map inspection_default
  match default-inspection-traffic
  !
  !
  type of policy-card inspect dns preset_dns_map
  parameters
  maximum message length automatic of customer
  message-length maximum 512
  Policy-map global_policy
  class inspection_default
  inspect the preset_dns_map dns
  inspect the ftp
  inspect h323 h225
  inspect the h323 ras
  inspect the rsh
  inspect the rtsp
  inspect esmtp
  inspect sqlnet
  inspect the skinny
  inspect sunrpc
  inspect xdmcp
  inspect the sip
  inspect the netbios
  inspect the tftp
  Review the ip options
  !
  global service-policy global_policy
  context of prompt hostname
  no remote anonymous reporting call
  Cryptochecksum:b67cdffbb9567f754052e72f69ef95f1
  : end

  I use customer VPN authentication with IP 192.168.2.20 host group with username:sap_vpn and key pre-shared password but not able to connect to the vpn and the error message attached.

  ASA, set up with the initial wizard ASDM: inside the interface IP 192.168.1.1 (VLAN1) and outside (VLAN2) IP 192.168.2.20 assigned by using DHCP. I use outside interface IP 192.168.2.20 to HOST IP to the VPN client for the remote connection? is it good?

  Please advise for this.

  Hello

  What train a static IP outside? We need a static IP address to connect, please try again and let us know how it works?

  Kind regards

• Problem error failed to set KB2345886. It's a real headache! help, advice appreciated.

  Problem error KB2345886

  See the following topic for your question

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/c82fa2ea-6c79-49D1-9AF1-c5c13287dea9 >

• I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found." Can help you!

  Original title: cannot find awuvomas.dll

  I can't solve this problem: "Error loading C:\WINDOWS\awuvomas.dll the specific module is not found."  Can help you!

  It is sometimes easy to get rid of the error message by doing something like disable the startup item in msconfig (if you can still find), but I suggest you fix the problem and difficulty not only the symptom of the problem by simply deleting the startup message.

  I would also not recommend you start digging in the registry to try to find the startup item and remove it unless you have a backup of your system or at least a backup of your registry, because there is no 'Cancel' or 'quit without saving changes' option in regedit.  If you make a mistake, that's all.

  These ideas relieve 'rapid' and sometimes risky of the symptom if they not even work at all, but they can't actually solve the problem.  Also, I'd be suspicious of ideas that begin with the words "try."  You don't need to try things, you need to fix things.  You don't need to try ideas that might work, you must do something that will always work all the time.

  Here are the detailed instructions that protect you and solve your problem in the 'right' way.

  There is very little. DLL files that should be loaded from the C:\WINDOWS folder and is not one of them.  If you do not have a good explanation for the name of the file in a Google search, the chances are good that your system is currently or has been infected by malware.
  A "Cannot find...". ', ' Failed to start..., "Could not load..." ». "Might not work... "" Cannot run ""error loading... ". "or"specific module could not be found"message at startup is usually related to the malware that has been configured to run at startup, but the referenced file has been removed after a malware scan, leaving behind him a startup item or the registry entry pointing to a file that does not exist.
  It might be a removal of malicious software or an application not installed.  The entry may have a curious looking name since it was probably generated at random when the malware was installed. If you search your system for the referenced file, you may not find.
  Windows attempts to load this file but cannot locate because the file has been deleted for most probably during an analysis of the malware. However, an orphaned associate of remainders of startup parameter or registry entry and tells Windows to load the file when you start or connection.
  So you should delete the referenced entry Windows stop trying to load or run the file. It may or may not be included in the registry, but you can find it.  Autoruns (see below) you get the elements no matter where it is.

  You must be sure to solve the problem and not just fix the symptom of the problem by simply relieving your message - system is not a fix (there is a difference).

  If you just locate and uncheck the item in msconfig, which disables the element but does not remove the reference to the element of false starting your computer.   The msconfig program is not a Startup Manager, that's a troubleshooting tool.  Disabling things in msconfig to put an end to the messages and think that your problem is solved is short-sighted and leave behind him a sloppy XP configuration.  Just disable the display of a start-up error message should not count as a 'solution' to the problem.
  If you are comfortable editing the registry, you can find and remove the reference directly from there or remove it using a popular third-party tool called Autoruns.  The problem can always be found in the registry well.
  Before making any changes to your registry by hand or with third-party tools, don't forget to first make a backup of the registry
  . There is no cancellation or exit without saving the option in regedit.
  Here is a link to a popular registry backup tool:
  http://www.SnapFiles.com/get/ERUNT.html
  You can also use the Autoruns to find the element of start remains little matter where he's hiding.  Autoruns does not install anything on your computer.  It will display all startup locations where the reference may be then you can turn it off or remove it completely.  Here is the download link for Autoruns:
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Run Autoruns.exe and wait that he at the end of the filling of the list of entries.
  When the Autoruns is finished scanning your system, it will say "Ready" in the lower left corner.  Autoruns can be a little intimidating to first if you have never seen it before because it displays a lot of information.  You are really interested only a few sections.
  The problem is usually to start the system or the user startup entries, then click the connection tab and see if the startup item is there.
  Scroll through the list and look for a boot entry associated files in the error message.
  If you can't find on the connection tab, look in any tab.
  You can also click file, search to search for logon, or any tab for all or part of the name of the element.
  Right-click on the offending entry and choose Remove.  If you are not sure what it is, you can just turn it off, restart and if the problem is resolved and things are functioning normally and everything works fine, then remove the offending entry.  If you don't see it in Autoruns, you may edit the registry and remove the item from your startup folder it.  Autoruns shall display the same information however.
  Given that your system has or has had an infection, follow up with this:
  Perform scans for malware, and then fix any problems:
  
  No matter what you use for malware protection, follow these steps:

  Download, install, update and do a full scan with these free malware detection programs at:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  They can be uninstalled later if you wish.
  Restart your computer and solve the outstanding issues.

• Host process generic for win 32 services has encountered a problem error message

  Host process generic for win 32 services has encountered a problem error message. How to fix

  Hi MarkGanbucci,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. That you receive the error message?

  See the Microsoft articles below and check if it helps.

  Generic host process error message and a flashlight icon appear

  http://support.Microsoft.com/kb/821690

  Error messages when you start a Windows XP-based computer and then try to download Windows updates

  http://support.Microsoft.com/kb/931852

• Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk.

  Disk problem error message: has: / is not accessible. No ID address mark was found on the floppy disk. I am new to the computer world and that you just want to remove info a diskette and put the information on a CD. Can someone help me please?

  Hello
   
  
  1. are you able to use the other disks?
  2 have you tried to use this disk on another computer?
   
  The article below explains this error message. It is possible that data on the floppy drive went bad. I ask you to check whether the floppy drive works on another computer.
  Quick format in no. ID address mark results found
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;130627
   
  
  Hope this information is useful.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• 1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  1st problem = Error 1606% APPDATA % and 2nd problem = WARNING Logger: initialize() is not yet known. The log file may experience corruption...

  Try this FixIt:

  Code error '0 x 80070646', '646', or '1606 ' when you try to install Office updates

  http://support.Microsoft.com/kb/2258121

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How can I correct I tunes problem = error code 42404?

  How can I correct I tunes problem = error code 42404?

  How can I correct I tunes problem = error code 42404?

  Post in the forums of Apple iTunes?

  Otherwise - use something like Revo Uninstaller (trial version) to make a more aggressive removal of ALL Apple software.  Reset.  Install the latest version of the web page.

• PROBLEM: Error 201 then manual download and now this... all for the trial of the PS. Ridonkulous!

  I spent over 3 hours trying to get this to work.

  First this thing creative cloud featured on my menu bar, but when I clicked it, it was empty.

  Then, I had to uninstall

  Then I had to clean the machine

  Then, I had to reinstall

  Then I had to start in safe mode

  Then, I had to reinstall it again

  Then, I had to unplug my router

  Then, I had to pee

  Then, I had to unplug my router again

  Then, I decided to walk the dog because it was still more than a waste of time to get this stupid error code

  3 hours later and I'm still dealing with this crap.

  Computer: MAC

  Operating system: OS x

  Version: Yosemite

  Problem error 201

  Then go into manual download - managed to get that to work for this thing stupid creative cloud.

  Now this: 2016-06-30_2018 - nlj2016 library

  What is amazing, is how long it takes to understand.

  What incredible mental masturbation just for a trial of photoshop so that I can understand how to use a PSD template for my facebook ads.

  And what loss HUGE absolute energy, time and effort for a company making BILLIONS of dollars, which can not afford to have someone understand this.

  Ridiculous.

  Hi all, I've tried all the various patches that were on these discussions and nothing worked. I finally found a way around it and spin back normal, but it was a trip. My summary is on this thread.  https://forums.Adobe.com/thread/1445371

  Seems in my case I went from error 201 error 123 and Adobe saying the question was my environment and necessary upgrade to the new Mac OS (not not the case), so the community has led me to the solution despite the insistence of Adobe that it was on our side and if we'd have just update our OS their thing would work... hogwash.

• AnyConnect vpn client gives error of certificate on ios cisco 2800 series

  Dear all,

  I set up a vpn on cisco router ios simple anyconnect 2811

  I also configured natting on the inorder of router to access the internet for local users

  My problem

  I can not connect same vpn if I use the method of the anyconnect vpn client

  Also please tell me how to access internal resources by configuring split tunneling

  the error I get is as below

  
  

  * 08:16:35.947 Feb 8: 252:error:14094416:SSL routines: SSL3_READ_BYTES:sslv3 certificate alert unknown:../../../../cisco.comp/pki_ssl/src/openssl/dist/ssl/s3_pkt
  .c:1062:SSL alert number 46

  Here is my configuration

  ABC host name
  !

  start the flash system: c2800nm-advsecurityk9 - mz.124 - 24.T1.bin

  !
  AAA new-model
  !
  !
  AAA authentication login default local
  local connection SSL-VPN-AUTH authentication AAA
  !
  !
  AAA - the id of the joint session
  !
  dot11 syslog
  IP source-route
  !
  !
  IP cef
  !
  !
  IP-server names 4.2.2.2
  !
  Authenticated MultiLink bundle-name Panel
  !
  !
  !
  Crypto pki trustpoint ABC
  enrollment selfsigned
  crl revocation checking
  rsakeypair ABC 1024
  !
  !
  ABC crypto pki certificate chain
  self-signed certificate 04
  3082023 HAS 308201 3 A0030201 02020104 300 D 0609 2A 864886 F70D0101 04050030
  27312530 2306092A 864886F7 0D 010902 73 732 6569 6173742D 6B 686177 16166D
  616E6565 6A2D7261 31313032 30383038 32333036 5A170D32 30303130 301E170D
  3030305A 31303030 30273125 30230609 2 A 864886 F70D0109 0216166D 65 73732
  2D6B6861 69617374 77616E65 656A2D72 6130819F 300 D 0609 2A 864886 F70D0101
  01050003 818 0030 81890281 8100C16D 1007E434 AFAEE3C1 90141205 E7785754
  FA3C4589 3D6B3D47 57BC54A5 7237E7FE 9B7CA69C 999B4DAF 835B98E9 972CFD03
  5A43488C 05E82E10 9B540AB9 5A54AB0C 525FED0E 05B6F2FF 6703F0BD F28AE6F2
  9E98298D E184CCDC 2D54741D 589 9731 C2BA5191 59DC7DC8 1F03C116 DDCF21EB D
  0BB4E931 02F61F64 D64A6F36 92F70203 010001A 3 76307430 0F060355 1 130101
  FF040530 030101FF 30210603 551D 1104 1A 301882 7373 656961 2 73742D6B 166D
  68617761 2 726130 1 230418 30168014 2FA1E05E 1BD981A0 1F060355 6E65656A
  A3485444 0B151D9E 44A3F6F6 301D 0603 551D0E04 1604142F A1E05E1B D981A0A3
  4854440B 151D9E44 A3F6F630 0D06092A 864886F7 010104 05000381 810096EF 0D
  39D4EEED E3CA162B E6BC1B61 0C3C66ED 02884209 0F4B54F1 BA7BEFF4 CAA206CE
  44 C 99817 134363 2 F29A9E6A 945AA1B4 E4B85ED7 1800DAA1 30BE25C3 8340AE80
  714F8FBD 9A433C4B 3EE2204D 88F7AB6D 929B5C88 5E7BC2B9 25754390 1622DB7B
  EEB11694 F381E995 59C825BE 52EA5923 F87C43A3 98744BE8 BB27C381 BE14
  quit smoking
  !
  !
  privilege of username XXXX XXXX 15
  username password ABC ABC
  Archives
  The config log
  hidekeys
  !
  !
  !
  !
  !
  !
  !
  !
  interface FastEthernet0/0
  IP address | public IP address. 255.255.255.252
  NAT outside IP
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  interface FastEthernet0/1
  IP 192.168.0.7 255.255.255.0
  IP nat inside
  IP virtual-reassembly
  automatic duplex
  automatic speed
  !
  interface FastEthernet0/2/0
  no ip address
  Shutdown
  automatic duplex
  automatic speed
  !
  local pool IP 10.10.10.1 intranet 10.10.10.254
  IP forward-Protocol ND
  IP route 0.0.0.0 0.0.0.0 GATEWAY
  no ip address of the http server
  IP http secure server
  !
  !
  IP nat inside source map route sheep interface FastEthernet0/0 overload
  !
  extended IP access allow-traffic-to-lan list
  deny ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255
  Licensing ip 192.168.0.0 0.0.0.255 any
  !
  access-list 101 permit ip 192.168.0.0 0.0.0.255 10.10.10.0 0.0.0.255
  !
  !
  !
  sheep allowed 10 route map
  match ip address allow-traffic-to-lan
  !
  !
  !
  WebVPN EIAST gateway
  IP address | public-ip | port 443
  redirect http port 80
  SSL trustpoint ABC
  development
  !
  WebVPN install svc flash:/webvpn/anyconnect-win-2.5.2018-k9.pkg sequence 1
  !
  WebVPN context XYZ
  SSL authentication check all
  !
  !
  political group XYZ
  functions compatible svc
  SVC-pool of addresses "intranet".
  SVC split include 10.10.10.0 255.255.255.0
  SVC-Server primary dns 213.42.20.20
  Group Policy - by default-XYZ
  list of authentication SSL-VPN-AUTH of AAA.
  area of bridge XYZ XYZ
  10 Max-users
  development
  !
  end

  Thank you

  Jvalin

  You could hit the next bug

  CSCtb73337    AnyConnect does not work with IOS if cert not trust/name of offset
  which is set at 12.4 (24) T02.

  Please update the code and give it a try.

• ASA VPN (NAT problem)?

  Hi people, I was hoping sopmeone on these forums might be able to help. I have some problem with a config for our ASA5510, functioning 8.2 (1)

  I installed a VPN tunnel a firewall to vyatta off-site. The tunnel is up.

  ABN-FW3-CISCO ASA5510 # show crypto ipsec his
  Interface: outside
  Tag crypto map: VPN_Zettagrid_Map, seq num: 10, local addr: 116.212.X.X
  VPN_cryptomap list access ip 192.9.0.0 255.255.0.0 allow 192.168.11.0 255.255.255.0
  local ident (addr, mask, prot, port): (192.9.0.0/255.255.0.0/0/0)
  Remote ident (addr, mask, prot, port): (192.168.11.0/255.255.255.0/0/0)
  current_peer: 119.252.X.X
  #pkts program: 14, #pkts encrypt: 14, #pkts digest: 14
  #pkts decaps: 16, #pkts decrypt: 16, #pkts check: 16
  compressed #pkts: 0, unzipped #pkts: 0
  #pkts uncompressed: 14, comp #pkts failed: 0, #pkts Dang failed: 0
  success #frag before: 0, failures before #frag: 0, #fragments created: 0
  Sent #PMTUs: 0, #PMTUs rcvd: 0, reassembly: 20th century / of frgs #decapsulated: 0
  #send errors: 0, #recv errors: 0
  local crypto endpt. : 116.212.X.X, remote Start crypto. : 119.252.X.X
  Path mtu 1500, fresh ipsec generals 58, media, mtu 1500
  current outbound SPI: 670F3BF5

  Now I can pass information of the 119.252.X.X to our internal networks (192.9.0.0/16) vyatta (yes I know this is a wide audience, but it comes to the environment, I inherited, I'm running with a project to put private network addresses, but its not finished quite yet)

  The problem seems to be information of ASA to the internal network behind the vyatta - 192.168.11.0/24.

  When I check my syslog I get the following error: (this example has been a connection attempt mstsc)
  : Inbound TCP connection deny from 192.9.216.190/60660 to 192.168.11.101/3389 SYN flags on the interface inside

  Now Im guessing this SYN message means that the ASA trying to NAT my outgoing packets... which is strange because I have configured a rule sheep. But when I do a show nat is the result:

  ABN-FW3-CISCO ASA5510 # display nat inside
  is the intellectual property inside 192.9.0.0 outside 192.168.11.0 255.255.0.0 255.255.255.0
  Exempt from NAT
  translate_hits = 0, untranslate_hits = 37 (this value does not change)

  Here is my config for NAT

  Inside_nat0_outbound to access extended list ip 192.9.0.0 255.255.0.0 allow 192.168.11.0 255.255.255.0
  Inside_nat0_outbound to access ip 10.0.0.0 scope list allow 255.255.255.0 192.168.11.0 255.255.255.0
  Access extensive list ip 192.10.201.0 Inside_nat0_outbound allow 255.255.255.0 192.168.11.0 255.255.255.0

  (I have a separate ACL for interesting traffic)

  VPN_cryptomap to access extended list ip 192.9.0.0 255.255.0.0 allow 192.168.11.0 255.255.255.0

  VPN_cryptomap to access ip 10.0.0.0 scope list allow 255.0.0.0 192.168.11.0 255.255.255.0

  Access extensive list ip 192.10.201.0 VPN_cryptomap allow 255.255.255.0 192.168.11.0 255.255.255.0

  Global 1 interface (outside)
  NAT (inside) 0-list of access Inside_nat0_outbound
  NAT (inside) 1 0.0.0.0 0.0.0.0
  NAT (dmz) 1 172.30.3.0 255.255.255.0
  NAT (management) 1 192.10.201.0 255.255.255.0
  NAT (dmz2) 1 172.30.2.0 255.255.255.0
  static (inside, dmz) 192.9.0.0 192.9.0.0 255.255.0.0 subnet mask

  Im guessing that one of these rules is in conflict? Does nat (inside) 0 Inside_nat0_outbound access list take precedence over the nat (inside) 1 0.0.0.0 0.0.0.0?

  I can post more if necessary config, any help at this point would be much appreciated

  Hmm looks like you establish 192.168.11.0 who seems to be blocked by the ACL on the traffic of 192.9.0.0 inside the interface.

  Please paste config ACL or see if that blocks this traffic.

  Thank you

  Ajay

• UTM50 SSL VPN IE11 problem

  I use the SSL VPN in time. I just noticed that when I tried to pass by I logged in and tap on connect, but now I get the error: virtual failure of execution of the Passage. I tried another computer that is already running IE9 and I had no problem getting in and using my office remotely over SSL.

  IE11 isn't working? or what should I be looking at.
  router is the latest firmware.

  64-bit is IE only.

  IE10 and 11 are disasters, when it comes to compatibility and how it manages Active-X controls. I'm not aware of any SSL VPN with IE10/11 suppliers.

  You can try Firefox. I can get the java applet to install, but the roads do not work for me.

  Contact support directly and express your concerns.

  You can always use IPsec client software.

• IOS XR MPLS VPN L3 + BGP error message

  I use the file "iosxrv-k9-demo - 5.1.2" image on GNS3 for free practice.

  When my IOS XR with MPLS L3 VPN router and assigning an interface of IOS XR to a VRF, it gives an error:

  RP/0/0 / CPU0:Feb 19 20:16:50.182: bgp [1048]: ROUTING-BGP-3-RPC_SET_ERROR %: [22]: read all RPC operation: Table. Error: ' Subsystem (3373) "detected the status of 'fatal', 'Code (37)': pkg/bin/PMO: (PID = 663826):-traceback = b395988 b229e9c 8226a4b 8224bdc afb2e7c b22d857 8267050.

  looking for a solution.

  Hi umesh, there is a table operation handler problem that has been fixed in xr 513. When the list is empty, it returns "error", but which is not necessary to return the error, an empty list can be ok, so the sw fix that went in is to check that and return errors more detailed codes inside the s in this case table operations and PMO communition XR (which is made via RPC or remote call procedure).

  few options who may be here to try:

  -1 ignore it and continue the configuration

  -2 set all definitions of vrf first under router bgp and everywhere where necessary before you assign it to an interface

  -3 clear config, reboot, apply the new configuration step by step with the first definitions of vrf and last to apply to the interface.

  -4 Download xr513 XRv.

  see you soon

  Xander