Market with power supply is not possible on the Satellite M60-167

Similar Questions

• Sims2 does not start on my satellite m60-167

  anyone has an idea why the sims2 does not work on my laptop? This shows only the logo and claims "sims2 noticed a problem and has to be finished."
  Why? There is no clonecd installed etc....
  everything seems to be on the new standard on my laptop. What is going on?
  Thank you very much for the help.

  Hello Petra

  It is very strange because the Satellite M60 has a very powerful graphics card. As you know on this path, it is not easy to give a precise answer. Sims2 is known to me, but I've never tried.

  Usually some games detect a problem with the performance of the graphics card, but the error message which mentioned is unfortunately not accurate. Thank you for visiting the SIMS2 support page. Toshiba doesn't support game problems and you have more chance to get some tips on the SIMS2 support page.

  Good luck!

• Qosmio x 870-Drag & drop with alt - tab is not possible using the touch pad

  Hi all

  I have a problem with my Qosmio x 870 and drivers touchpad Synaptics on Win7 64 bit.
  They do not drag-and - drop between applications.
  As soon as I press Alt - Tab, all by dragging a file to switch to one another application, dragging instantly stops.

  I use official & later (15.3.41.7) drivers of Toshiba touchpad http://goo.gl/pKHAI here

  I tried to install the generic Synaptics drivers and they do not have such a problem.
  With them, everything works very well with drag and drop.
  However, their implementation of two fingers to scroll is really buggy and more than half the time it does not work so I can't use them.

  Does anyone know if this bug and when?

  Any help? Thank you!

  Hello

  Maybe you should check the settings in
  Control Panel-> mouse-> advanced-> Advanced Settings tab

  There is an area called operations during key entry
  Make sure that the options are not checked.

  You said you tried the driver generic Synaptics you chose this one:
  http://www.Synaptics.com/resources/drivers

• replace 300 watt POWER of ML330 G3 unit with power supply 600wattage is this possible?

  Hi guys,.

  If I could replace 300 watt POWER of ML330 G3 unit with power supply 600wattage is this possible? Is this possible? Please notify

  Hi Big_Dave

  Thank you for your continued support...

  Now, I replaced the in situ 300 watt power supply provided with the HP ML330 G3 with 750 watt Corsair and well. No smoke or fire smelly so that chips and salmon "I am preparing for dinner.

  Regarding your question, Yes, the size of floppy Bay is the same size as that of rpm scsi 10 k 80pin. drive it is a 80-68 pin code converter that plugs nicely into the internal water of 68 pin male. Corsair 750w PSU comes with connectors 8 x 12v morlex, these can be connected to the connectors extra 12v adapter needed to put these converters to 68pin 80 - scsi

  Daisy chaining scsi disk is easy, the two external channels can be used to connect to the scsi drive more in an another case unithaving / chasy a total of 28 scsi disk Garland.

  Everything is settled now, my only question now is to do with knowing how to configure RAID correctly and this constant warning about Battery Backed Write cache messages' on the smart card array 6400 however I'ld who post on another section of this forum. This can now be closed according to the original question with replacement of the power supply to a power greater.

• Power supply or not?

  I have a hp pavilion a450n desktop pc, running windows xp, that I bought in 2004. So far, this pc has run flawlessly. Yesterday, this computer was working normally. Today, when I pressed the power button to turn it on, there are no answer. No beeps, no lights, no fans, no hard drive. Absolutely nothing. I checked all the connections and everything seems to be in order, however, the little green light on the back of the power supply is NOT turned on. From what I've read on troubleshooting sections here on the internet, a power failure is most likely the problem. What bothers me is that my hp was working fine yesterday. There are no funny smells, sounds of sides or behaviour erratic to indicate that something is wrong, or even wrong. A power supply can really just stop working so suddenly? Or should I look at other possible causes?

  Thank you for any input!

  OK, I have panicked prematurely. And thank you, ksbear57, to remind me to check the obvious things first.

  I have returned and all disconnected the new PSU and then reconnected everything again. This time, I made sure that each connection was tight and completely in place. Then, I also have snugged all other connection and card in the pc, in case where something had detached during installation. After this, my flag pulled straight up! Today, she continues to come to life, whenever I push the power button, and it also runs smoother than ever.

  So, thank you, Big_Dave, for your patience and for pointing me in the right direction with this. And thank you, ksbear57, for your support and your cool. You both were a great help!

  I realize I have to replace this aging computer, at some point. But it's nice to know that she still had some life left in it.

  I am happy!

  Abbey60

• Satellite U500 - 11 C - power supply unit not detected

  Hello

  on my Satellite U500 - 11 C, the power supply is no longer recognizes (the rest green LED turns off when I plug)

  I tested my diet and it's OK

  I disassemble my laptop to check the connector and the power is OK of the external connector to the connector on the motherboard.

  with my battery, the computer works normally (but the battery is not more)

  You have an idea on how to solve this problem?
  What can I check?

  > Do you have an idea on how to fix this?
  If the battery and the mains adapter are ok, while a single problem can cause this: faulty motherboard.
  Maybe there is something wrong with the electronic power supply on the motherboard.

  Of course this is only my personal opinion, but I put t see any other reason for that

• Pavilion HPE H8-1121: Pavilion HPE H8-1121 - new graphics card + power supply does not start after screen HP (Revisited)

  I have the same problem as this post 2013!  Ouch. Pavilion HPE H8-1121 - new map chart + power supply, does not start after HP screen.

  I installed a new power supply (Seasonic 620W), which works well.  I also installed a GTX 660Ti last year and it was works fine as well.  I recently bought a ZOTAC GTX 970 and attempted to install it, but it will not go beyond the blue HP screen and I get the same code of beeps (1 long, 3 short), who, seems, suggests that the video is not initialized.

  My BIOS date is 2011.

  Where can I find an update for this?

  I'm also using Windows 10, which I found on the HP site is not tested on my model and would probably not favourable to good use.  Should I do back up to 7 or 8?  and then update the BIOS?  Y at - it a update for my BIOS and where can I find.

  In any case, I hope that this is a solution.  Again, this is not a bad machine to be 5 years old.

  Thanks for any help!

  If the video card that you have purchased dose not a legacy vBIOS it will never start. An update of the BIOS doesn't solve that.

  It is likely that your new video card has a vBIOS UEFI and that only is for the PC motherboards newer than yours which have a UEFI BIOS. Your motherboard has a legacy BIOS. 2012 is the year of model when the UEFI BIOS more or less became the de facto on motherboards standard.

  I return it for a refund. Find the candidate of video cards that support the old BIOS. It can be inherited only or switchable vBIOS (legacy or UEFI) vBIOS.  I suggest looking at the site of Sapphire Technology. ZoTac is not known to provide enough information about their video cards in the way. You upgrade a pre-built desktop PC and it's different and a little more difficult to set up a DIY PC. I looked at the site of Zotac and see that nothing is said about their video vBIOS cards.  I would return to the map.  Carefully read the specifications of the video card. A candidate for your motherboard card must have inherited vBIOS support or simply, it won't work.

  ZOTAC (they don't say anything about their product vBIOS)

  https://www.ZOTAC.com/us/product/graphics_card/GTX-970-amp-extreme-core

  Sapphire Technology

  http://www.sapphiretech.com/catapage_pd.asp?cataid=305&lang=eng

  Because you look at game with 4 GB cards. Take a look at the following map. It has a double vBIOS. legacy and UEFI. http://www.sapphiretech.com/productdetial.asp?pid=640A98CD-0CF0-4191-B75C-CA2800111ADB&lang=eng

  

• Must I also patch grid infrastructure home with power supply?

  Hello

  I am building a new server to replace an old one with the following configuration:

  OLD Config: Oracle 11 g 2 EE (11.2.0.3) with POWER 16056266 block, on OEL 6.2 64-bit (file system)

  NEW Config: Oracle 11 g 2 EE (11.2.0.3) with power supply on OEL 6.2 64-bit, ASM (grid below) 16056266, 11.2.0.3

  If I understand correctly, grid Infra Software version cannot be less than that of RDBMS software. Because the RDBMS software must be patched with 16056266 power supply to match the existing server, I have a few questions:

  1. Should I ask a PSU 16056266 grid infrastructure home (I'm sure the answer is 'yes', but I want to ensure that)
  2. Is the same power supply for the RDBMS and grid infrastructure OR there is a download separate patch for grid below?
  3. I need to replace the existing 'OPatch"under grid infrastructure home with the latest [just like I do to patch House RDBMS]?

  Thanks in advance!

  Hello

  You must apply the following PSU on the grid below:

  BUG 16083653 - 11.2.0.3.6 (April 2013) Grid Infrastructure Patch Update (GI PSU) contains

  BUG 16315641- PATCH UPDATE SET 11.2.0.3.6(GI COMPOSANTS de l'INFRASTRUCTURE GRID)

  BUG 16056266 - 11.2.0.3.6 (April 2013) set of patches of database update (PSU)

  as mentioned in: -.

  Readme - Patch Installation and uninstallation of 11.2.0.3.x GI PSU [ID 1494646.1]

  Kind regards

  Dalia Sarey

• I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

  I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

  What you suggest is possible but it takes software and third-party quality loss.

  Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

  Then import the movie into FCP as a clip.

  Good luck.

  Russ

• I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection.

  I have a problem with my laptop does not connect to the internet. It connects to our wireless very well, but it doesn't have an internet connection. It connects to other networks wifi very well with Internet access, is that the wireless in my house what it connects to. When I diagnose the problem, it says "Cannot communicate with DNS server (208.67.222.222)", and then under that it says: "languished network diagnostics remote hosts, but had not received a response." It connects to the Internet through an ethernet cable, but it is rather annoying pulling the cable autour. I currently have Windows Vista Home Premium. Thank you!

  original title: Internet connectivity problem

  Hello

  Now, you may need to contact the support of Panda Internet Security centre to change the settings so that wireless is enabled through it.

  Support link: http://www.pandasecurity.com/homeusers/support/

• Can not turn on the Satellite M30

  Hello everyone...

  I have a Satellite M30 laptop for time enough and I'm having a problem with it. When I try to turn it on, it makes a kind of scratch noise and then nothing happens. The hard drive lit wrath but the computer does no sound and no picture on the screen. I tried to turn it on with and without the battery and the same thing happens.

  A few days before this happened that I could see the windows startup screen, after that the computer crashed, even when I went to the BIOS Setup screen, the computer also crashed, so the problem was not on the hard disk. A few days later, when I tried to turn it back on, it makes a single probe and nothing else happened. Can it be a motherboard problem? can I try before sending it for repair

  I'm scared of m it s a serious problem.
  Depending on the symptoms that you described the laptop cannot get the message and so I think there may be an error on the motherboard.
  I don t think you will be able to locate the fault. It is simply not possible for the common user like you and me

  If you have no choice as to the request of the service provider for Toshiba for help.

• Tecra M2 suddenly does not work with power supply

  Hello

  Suddenly my laptop does not work with power... (with the battery, that it works very well)

  The power supply works fine.

  Someone at - it an idea for this error?

  Winni

  Maybe the DC-in port has no contact with motherboard anymore and the electronic board can not get AC power.

• Satellite A200 - will not start with power supply connected

  My lapop is 2 years old. Whist trying to boot it restarts at least 2 times and I am running Windows 7.

  My old battery lasts about 20 minutes so I bought a new and the first time that I loaded up it gave me an hour of a time value of battery, but on the second cooldown it has provided for 20 minutes.

  It does not always to the top while the power is connected do you think that my motherboard is defective =.

  Hello

  Normally, if you connect the laptop AC adapter shouldn't t stop. Everything should work correctly as the system even starts the battery would be defective.

  So, I think you already wrote that the motherboard is faulty. In this case I recommend to contact an authorized service provider. Technicians can order a new mainboard and Exchange! :)

• How to use the Camileo H30 with Power Supply

  Hello

  First: Excuse my English, im from Germany ;)

  I have a Camilio: 30. its has been purchased used. I've only had the camera & the original battery.
  No supplements (such as usb or power supply cable original)

  what I want: I need to shoot for a few hours. The battery is unable to do. so I want to use it with a block of power, but when I put in (throughh a mini-usb connector) of the camcorder goes into charing (no actions are possible), but I want to make full use of the feature when the power is connected.
  How should I treat it?

  I got an a 2, 25 a 5V power supply, I think its enough... or not?
  The label on the side of the camcorder bottum said 5V 2A...

  Thanks 4 help me :D

  Greetz

  Hello

  If the Camileo H30 and I got this camcorder with battery and adapter supporting USB mini jack.
  The s AC adapter camcorder supports the release of 2A and 5V
  Its model DSA-10 p-05

  Google for this model, maybe you could get one from some dealers online
  Otherwise recommend that you check the other adapters supporting these values.

  For example this one:
  http://www.toshibadirect.com/TD/B2C/Adet.to?poid=484958

• Portable computer L500 satellite starts only with power supply

  Hi Please help me
  I brought my laptop say there are 3 or more weeks... I'm working on the battery and power, but just now I can only run in power.

  Its like the battery does not exsist. It indicates that the battery is charged to 100% but the computer does not light with the power of the battery...

  Any suggestions would be highly popular...

  -d-

  When the operating system is loaded is recognized correctly battery?

  In any case, this behavior is not normal and maybe you should contact the nearest Toshiba service provider and ask for help. They can check the battery and the power supply electronic and see what's wrong here. The warranty is valid if new battery or repair will be free.