Satellite A200 - will not start with power supply connected

My lapop is 2 years old. Whist trying to boot it restarts at least 2 times and I am running Windows 7.

My old battery lasts about 20 minutes so I bought a new and the first time that I loaded up it gave me an hour of a time value of battery, but on the second cooldown it has provided for 20 minutes.

It does not always to the top while the power is connected do you think that my motherboard is defective =.

Hello

Normally, if you connect the laptop AC adapter shouldn't t stop. Everything should work correctly as the system even starts the battery would be defective.

So, I think you already wrote that the motherboard is faulty. In this case I recommend to contact an authorized service provider. Technicians can order a new mainboard and Exchange! :)

Tags: Toshiba

Similar Questions

  • SatelliteU300 will not start with power connected and fully charged battery

    I just bought a U300-13U. It works fine when charging the battery and AC is connected. However, if left to recharge completely it does not start with connected AC. Unpluging the power or remove the battery and running on AC make it work very well. Is a 'feature' to stop an overload or overheating of the battery, or just a problem with this machine. I want to run with AC and battery than both connected all the time like I did with all my other laptops.

    Any help appreciated.

    Hello Andy

    Of my friends has this small U300 and everything works well. I got it a few weeks ago to test the family Windows XP Setup and it works perfectly.

    Please test again very carefully and if the same thing happen again once I recommend you contact the Service partner in your country. They check your laptop. I have to be honest and say that describes the problem of strange sounds to me and please, don't wait too long. Contact the service as soon as possible.

    Bye and good luck!

  • Satellite A60 - do not start after power supply fault!

    Hello

    I know it's a long shot, but here's the situation!
    I had a Toshiba Satellite A60 PSA60E for repair.

    He had the power plug inserted into the back of the case of the break taking, damaging U4 and hit 3 resistors.

    I have now replaced the socket, transplanted the resitors counsel doner and welded in a new IC (U4).

    Now when I turn on I get the LED illuminating as expected (Inc. that blue on the power button) but nothing on the screen, no fan, no disk buzzing etc away.

    Ideally, I would like to try subing cpu etc but don't have any alternative to play with.

    If any ideas whatelse could be wrong on that?

    Not sure I want to risk the cost of a new motherboard (that they is availible) or that it would be interesting to the replacement of the machine.

    Look forward to some good advice
    Thanks Jon

    Hi Jon

    Unfortunately, I n t think that someone here in the forum will give you a precise answer and provide the solution it seems that it s a motherboard problem.
    As you know that the computer motherboards are complex parts with many electronic details.
    It of impossible to say what could be the problem on the Board without any detailed controls.

    To my knowledge, card repair mother is not so easy and expensive so you should not pay for the repairs, but buy a new Board of Directors which is covered by the warranty or second hand board which is much cheaper

  • My Satellite A200 does not start

    Hello

    my name is Phil, my Toshoba Satellitw A200 will not start. I just get a black screen, I tried starting with a/c unit only, with & without a/c power. I tried several times without success.
    I am running Vista Home Premium & have all the obvious anti-virus/malware proection.
    Can someone please help. I was told that the hard drive may need re-allocation of places, how do you do that?

    Thank you.
    Kind regards.

    Stand by.
    If I understand you right, you can start your laptop but the screen remains black. Can you confirm this?

    Or simply nothing happens. What happen exactly when you press the power button / stop?

  • My CS will not start with error code 16

    How can I find the serial number CS5.5 under MAC OS X if I want to reinstall it? My CS will not start with error code 16, he says: configuration error.

    Please visit the Doc KB: http://helpx.adobe.com/x-productkb/policy-pricing/configuration-error-cs5.html

  • A5383 S55D satellite will not start without power

    Hello!

    I have the Toshiba Satellite S55D A5383 laptop and I have a problem with the battery, I think.
    Laptop does not start without power. What is happening since last week.
    In fact, since April 2015 battery does not last as it did when I bought (may 2014).
    I have'nt registered the product and I think I'm out of warranty.

    So, what can I do to fix this?

    You'll probably just get a new battery which is what I did. Try Amazon.

  • Satellite A500 will not start

    I have an A500 on 12 months old that will not start.

    The battery light shows white and power on AC light is on as well.
    When button "power on" is pressed and released the laptop IT flashes briefly then the battery lights up orange briefly and the light goes out.

    Battery has been divested of the case and it was completely discharged and it still will not with or without the battery. He has been connected to a different power of toshiba with the same results.

    The difficulty feeding saw two days ago. After that about 10 minutes to load then turned on.

    I saw a post where the guy was acquitted of the internal cmos memory and he ends up - which would have something to do with it?

    Any clues anyone?

    Hello

    I think that it s something wrong with the motherboard or a part of the motherboard.
    The point is this laptop should turns on even if the battery is empty and the power adapter is plugged so maybe it s something wrong with the memory supply or electronic power on the motherboard.

    I recommend you check the parts of memory first. Remove a module and try to start the device using that one module.

    Of course this can not help you too... so in this case, it could be a severe motherboard issue...

  • Satellite A40 will not start or start the BIOS

    Hello

    I have a portable Satellite A40 2 days ago decided to turns off while I was on the internet, and now it does not restart. I tried removing the battery and leave overnight, but it still will not start. When give you it power outlet, the AC LED is green and if you press the button power turns on the green power light, but that's all, the HARD drive light does not illuminate, the fan does not come on, no sound from the HARD drive and nothing on the screen, not even the backlight. You can also feel the heatsink gets hot (without excess however)

    If you insert a CD, you can here read the disc, and find things out there, too, now the power button still cut off the laptop.

    If anyone has any advice on what may be the cause, or any way I can get the machine to reboot again, that would be greatly appreciated.

    Hello

    Have you tried to connect the laptop to the external monitor to check if pictures or anything else appears on the second monitor?

    Your description sounds like the malfunctioning of the internal display, but it is only a suggestion and a few trials are required to obtain a diagnosis right.

  • Satellite C650 does not start with android phone on

    Hello

    I have a smallproblem. My Satellite C650 does not start when my android phone is plugged into the USB port. It sticks to the Toshiba start screen. I checked the boot order and the hard drive is the first on the list, so it isn't that. Any advice will be welcome.

    Thank you very much
    Ian

    Cool. Thanks for the comments.

  • Re: Satellite U300 will not start

    The machine has failed at a conference while using only the word and not on any network.

    Now the machine will not start orrepair and even the recovery disk will not work. He gets to the part where he asked for the language and then freezes on the next screen. I ran a disc hard diagnosis progam which reports no errors but I don't know enough about such things.

    The drive light flashed hard and I can hear the work of the reader, but nothing happens.

    Help, please

    Hello!

    It's strange, but in your case I would try to format the HARD drive before using the recovery disk.
    There, you can use the Microsoft Windows XP disk or another tool that allows you to format the HARD drive.

    If you have formatted the drive HARD try again with the Toshiba recovery disc.

    Good bye

  • Tecra M2 suddenly does not work with power supply

    Hello

    Suddenly my laptop does not work with power... (with the battery, that it works very well)

    The power supply works fine.

    Someone at - it an idea for this error?

    Winni

    Maybe the DC-in port has no contact with motherboard anymore and the electronic board can not get AC power.

  • Satellite Pro A200 - does not start with 4 GB of RAM

    Hello

    I installed 2 x 2 GB, but it seems that it does not work. The funniest is that when current to run just a bunch of memory (2 GB so) it works, when you run both, it does not work and it freezes. This is the Samsung 2 GB 2Rx8 PC2 - 6400 s - 666 - 12 - E3

    Ive' installed the BIOS (64 bit v2.60) was last updated for the Satellite Pro A200 and I am running Windows 7 64 bit

    Hi caribman

    What Satellite Pro A200 you have exactly?

    I ask this question because some A200 models were equipped with chipsets 943GML and these models support 2 GB only!

  • Satellite P30 will not start, but shows the power on LED and fans work

    I work on a P30, radiator cleaned, the basic form of new fine thermal compounds, worked for a few hours, then turned it off and move the power LED lights, fans, cd rom works, but it is she, no display, no boot, nothing.

    Any ideas on how to solve this problem would be a great help.

    Plug

    P30
    P4 3.2 ht
    1 gig of ram, tested.
    XP pro

    Hello

    On this path, it is not easy to say what can be the problem and just inquiry may help, but from your description, I'm afraid that there are some critical material damage. It may be something wrong with the power supply (motherboard) or perhaps is the grilled CPU if you have done something wrong with the thermal paste.

    Sorry, but I think you should contact the partner customer Service in your country and check it properly.

  • Satellite A100 will not start

    Hello

    I have a Toshiba Satellite A100-151, which does not start.

    A batery 11 times blink when I press the a/c power and nothing happens.
    Before that, I pressed too many keys f1 - f12 because it has stopped responding and a blue screen (memory error in the kernel) appeared.

    I tried:
    out/HDD, memory slot, battery and tried also reset with the AC button pressed without the battery.
    Thanks in advance for any helpful advice.

    Best regards

    As you know on this virtual path is not easy to say what the problem is here, but after reading your ad, I think there must be a problem with electronic control gear. It is placed on the motherboard.

    Problem is that work around is quite limited and I can see what you have already tried all the logical steps to check if computer laptop will be able to start on a path.

    I'm afraid it is worth noting that you can do except to communicate with the service of Toshiba and ask help from m.

  • Satellite L300D will not start

    Hello

    I have a satellite L300D 11v. Power I have three lights green, power, suite and battery, DVD looking for some time nothing happens.

    Tried many things.
    Interchangeability and remove the ram with restarts
    Removing and replacing HD
    Remove the battery, hold the power button for a minute then power application and try to turn on,.
    As above with the battery.
    None of the above has worked, I suspect either of the BIOS chip lost his memory or it is fried.
    I will try to reinstall the BIOS memory, but without the work of the OS I'm not sure how do.
    And I'm not sure that the update of the BIOS I downloaded from Toshiba is correct because of the manual I downloaded was the L350, and yes I have enter the correct details to try three times. Neither seem to be able to know which is the BIOS. I would be grateful if someone could suggest what's wrong with the laptop or the update of the BIOS with the laptop in its current state. And if anyone knows what variant of the BIOS, is that I would also be grateful for this information.

    P.S. I noticed that the same problem was raised on August 12, 2012 with no resolution found.

    On this virtual path t is not easy to offer accurate diagnosis and to say with certainty what the problem is here, but somehow, I think that your BIOS chip is damaged. BIOS update will not help you with that.
    When you start your laptop is stays on or turns off after a certain period of time?

Maybe you are looking for

  • I had Adobe Flash continuous accidents since the last update.

    I had continuous accidents of Adobe Flash for Firefox updated 3 or 4 days ago. I uninstalled Flash through the Add/Remove in the control panel and reinstalled Adobe Flash. Update ran and all plugins etc are uptodate. What to do now to solve the probl

  • pictures will not download because of the size restriction

    My son just opened his new bike g today for Christmas, he loves. I've implemented on ptel wireless. The problem is whenever it is sent a text Message he doesn't know if it's the wireless or Wi - Fi. He got a few pictures first thing today but since n

  • 10109 with THORLAB DDS220/M and BBD202 error

    I am designing a xy-stage. I met the 10109 error that says that 'control Communications disabled HW'. I have attached my code below. There are 2 serial numbers because I have 2 steps. I would appreciate any help on this matter. Thank you!

  • printing with my note from samsung

    Does anyone know how to print from note 2 Samsung on a wireless hp deskjet printer. I downloaded e.print Jane

  • waiting for (wireless) network error in Windows xp

    IN my office network another laptop are connected with the same wireless router, but only my system does not connect with the radio... I also re - install the wireless driver, but the same error occurs. Please help me regarding this