Similar Questions

• Market with power supply is not possible on the Satellite M60-167

  Hello

  I'm sorry for my English saw. I have a problem with my Satellite M60-167. When I have connected the laptop with power supply and press the 'Power', then does'nt start Notepad.
  When I use only the battery and push a lot of times the "Power Button", that the laptop will be started.
  Question: It is a problem of material or not. This laptop that I bought it in January 2006.

  Can you help me?
  Thank you very much for your theory.

  AX.

  Hi Axel

  My theory is that there may be some problem with button / stop himself (white metal under the button), or perhaps with several Planar cable wire.

  Also, for me it is definitely hardware problem. If you want, you can contact the partner of service allowed in your country and see what they have to say about it.

• replace 300 watt POWER of ML330 G3 unit with power supply 600wattage is this possible?

  Hi guys,.

  If I could replace 300 watt POWER of ML330 G3 unit with power supply 600wattage is this possible? Is this possible? Please notify

  Hi Big_Dave

  Thank you for your continued support...

  Now, I replaced the in situ 300 watt power supply provided with the HP ML330 G3 with 750 watt Corsair and well. No smoke or fire smelly so that chips and salmon "I am preparing for dinner.

  Regarding your question, Yes, the size of floppy Bay is the same size as that of rpm scsi 10 k 80pin. drive it is a 80-68 pin code converter that plugs nicely into the internal water of 68 pin male. Corsair 750w PSU comes with connectors 8 x 12v morlex, these can be connected to the connectors extra 12v adapter needed to put these converters to 68pin 80 - scsi

  Daisy chaining scsi disk is easy, the two external channels can be used to connect to the scsi drive more in an another case unithaving / chasy a total of 28 scsi disk Garland.

  Everything is settled now, my only question now is to do with knowing how to configure RAID correctly and this constant warning about Battery Backed Write cache messages' on the smart card array 6400 however I'ld who post on another section of this forum. This can now be closed according to the original question with replacement of the power supply to a power greater.

• "opatch" failed when applying "PSU 16083653" to grid infrastructure home.

  Hello

  ENV: Oracle Grid below 11 GR 2 (11.2.0.3) on OEL 5.8 32-bit

  I installed grid Infrastructure 11 GR 2 (11.2.0.3) on the server of OEL 32-bit ('Software Only' option).

  I applied PSU 16083653 IM home. I downloaded the last OPatch and when I check the opatch version, here is what I get:

  [oracle@srvm58-1 OPatch_32bit] $ $ORACLE_HOME/OPatch/opatch version

  OPatch Version: 11.2.0.3.6

  OPatch succeeded.

  [oracle@srvm58-1 OPatch] $ $ORACLE_HOME/OPatch/opatch lsinventory

  Setup Oracle interim Patch version 11.2.0.3.6

  Copyright (c) 2013, Oracle Corporation.  All rights reserved.

  Oracle home: /u01/app/11.2.0.3/grid

  Inventory Center: / u01/app/oracle/oraInventory

  from: /u01/app/11.2.0.3/grid/oraInst.loc

  OPatch version: 11.2.0.3.6

  YES version: 11.2.0.3.0

  Location of the log file: /u01/app/11.2.0.3/grid/cfgtoollogs/opatch/opatch2014-02-03_15-57-24PM_1.log

  Location of the output file Lsinventory: /u01/app/11.2.0.3/grid/cfgtoollogs/opatch/lsinv/lsinventory2014-02-03_15-57-24PM.txt

  --------------------------------------------------------------------------------

  Installed products of higher level (1):

  Oracle Grid Infrastructure 11.2.0.3.0

  There are 1 product (s) installed in the home of Oracle.

  There is no temporary patch installed in this House of Oracle.

  --------------------------------------------------------------------------------

  OPatch succeeded.

  [oracle@srvm58-1 OPatch] $

  When I tried to apply the PSU, I get the following errors:

  [root@srvm58-1 OPatch] #. / opatch auto /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653/16315641-oh /u01/app/11.2.0.3/grid

  Execution of /u01/app/11.2.0.3/grid/perl/bin/perl./crs/patch11203.pl - patchdir /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653 - patchn 16315641 - oh /u01/app/11.2.0.3/grid - paramfile /u01/app/11.2.0.3/grid/crs/install/crsconfig_params

  It is the main log file: /u01/app/11.2.0.3/grid/cfgtoollogs/opatchauto2014-02-03_17-46-03.log

  This file shows your detected configuration and all the steps that opatchauto tried to do it on your system:

  /U01/app/11.2.0.3/grid/cfgtoollogs/opatchauto2014-02-03_17-46-03.report.log

  2014-02-03 17:46:03: starting installation of Patch Oracle Restart

  The file of configuration settings using: /u01/app/11.2.0.3/grid/crs/install/crsconfig_params

  Enter 'Yes' If you have unpacked this patch to an empty directory to move forward (yes/no): Yes

  Enter 'Yes' If you have unpacked this patch to an empty directory to move forward (yes/no): Yes

  OPatch comes with the CMO, enter the path to the absolute response CMO file:

  /U01/app/11.2.0.3/grid/OPatch

  The minimum version of opatch search fix /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653/16315641/custom failed for /u01/app/11.2.0.3/grid

  The minimum version of opatch search fix /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653/16315641/etc failed for /u01/app/11.2.0.3/grid

  The minimum version of opatch search fix /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653/16315641/files failed for /u01/app/11.2.0.3/grid

  Check failure of version Opatch for oracle /u01/app/11.2.0.3/grid House

  Version check Opatch failed

  ERROR: update version opatch for households failed and retry

  Automatic opatch failed.

  [root@srvm58-1 OPatch] #.

  OPatch is already a more recent version. Help, please!

  OK I solved the problem. The error I was getting is misleading.

  I did two things:

  1. for the root user: "export PATH=$PATH:/u01/app/11.2.0.3/grid/OPatch".

  2. thanks to the solution provided by 'Papp Balázs' in the post:

  confuse OPatch error PSU 13919095 (July 2012)

  I removed the location correct patch and re-issued the command like this:

  [root@srvm58-1 OPatch] #. / opatch auto /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_16083653-oh /u01/app/11.2.0.3/grid - ocmrf /u01/app/11.2.0.3/grid/OPatch/ocm.rsp

  instead:

  [root@srvm58-1 OPatch] #. / opatch auto /stage/oracle/Oracle11gR2_11.2.0.3_for_Linux/32bit/Grid_Infra_11.2.0.3/GI_PSU_1608365316315641 - oh /u01/app/11.2.0.3/grid - ocmrf /u01/app/11.2.0.3/grid/OPatch/ocm.rsp

  all right.

• 11 GR 2 Grid Infrastructure install - with normal redundancy ASM disk group requires 3 disks?

  
  Hello

  I want to install 11 GR 2 grid Infrastructure in a new environment in cluster - 2 nodes). I use the 11.2.0.4 GI Installer on Oracle Linux 6.5 x 86-64

  However when it is in the installer of GI, it comes to choose the storage Option - I choose ASM disk groups.

  Then change the path of discovery to pick up my candidate ASM disks.

  I enter the disk group name SIR give Normal redundancy, choose 2 discs of candidate and then press < next > to Setup.

  However, I gives me the message

  [INS-30510] Insufficient number of ASM disks selected

  The number of selected disks was inadequate for the level of redundancy selected

  For a disk group with redundancy level "Normal" disks at least "3" are recommended

  I always thought that Redunancy Normal required only 2 discs and high redundancy requires 3 disks?

  No idea what is gpoing?

  Thank you

  Jim

  Consult the following notes for how to move:

  Note 1638177.1 and 428681.1

  Concerning

  Thomas

• Installation of the Infrastructure of grid and patchwork of power supply

  Version of the GRID: 11.2.0.3, 11.2.0.2
  Platform: AIX 6.1
  
  Found a similair in a spiral position in OTN on. But couldn't find the answer here; That is why this announcement
  
  We install the grid using the GUI installation program grid. When you perform a new installation of the Infrastructure of grid 11.2.0.2 or 11.2.0.3 in a new server, I want to apply its latest PSU as well. When should I do this task PSU?
  

  A. Should I apply the GI PSU after the entire Grid installation is successfully completed ?
  or
  B. Should I apply the GI PSU just before running the root.sh ?
        ie. when the installer prompts you to run root.sh (see the screenshot below)
              http://husnusensoy.files.wordpress.com/2009/10/camtasiastudio351.png
        At this stage(before running root.sh) the GI binaries are in place . So , I can apply the PSU on these binaries? Right?

  Should I follow option A or B above?

  Hello

  Should a. I apply the PSU IM after the installation of the grid ends successfully?

  Yes, you must complete the successful installation and after apply PSU

  B. can I apply the PSU im just before you run the root.sh?
  That is to say. When the installation program prompts to run root.sh (see the screenshot below)
  http://husnusensoy.files.WordPress.com/2009/10/camtasiastudio351.PNG
  At this point (before you run the root.sh script) GI binaries are in place. So, can I apply the power supply on these binaries? Right?

  Yes, you must complete (close) runInstaller after root.sh, so you can ask the PSU, because if you start with YES opatch (runInstaller) runs the inventory will be locked.

  Also, you have an opportunity to decide if you want to use the software upgrades during the Installation.

  YES can install updates patch reviews, requirements system updates (hardware, operating system settings and packages of core) for the operating systems supported and other important updates that can help ensure that your installation is going smoothly. Oracle recommends that you enable the software updates during the installation.

  If you choose to enable the software updates, and then during installation you must provide valid My Oracle Support username and password during installation, so that YES can download the latest updates, or you must provide a path to the location of a software updates package you downloaded previously.

  If you plan to run the installation in a secure data center, so you can download updates before you start the installation by starting YES on a system that has Internet access to download update mode. To start YES to download updates, enter the following command:

  $ ./runInstaller -downloadUpdates
  

  Provide My Oracle Support user name and password and provide the parameters of the proxy if necessary. After downloading the updates, transfer the update file to a directory on the server where you plan to run the installation.

  Kind regards
  Levi Pereira

• HP Pavilion G4 1310AU: problem with power supply for laptop HP Pavilion G4 1310AU

  Hi This is my first thread in the toms hardware, I have problem with my laptop power supply. my laptop cannot turn on if I remove the battery and use the charger only, but if I use my cell phone battery can turn on without problem for my laptop to use the battery to turn on and after my laptop that works and I remove the battery my still laptop running with the charger plugged, and that I charge my phone when my battery<80% capacity="" e.g="" on="" 40%="" battery="" power="" my="" laptop="" underclocked="" processor="" speed="" to="" 800="" mhz="" from="" 2.5="" ghz,="" i="" have="" changed="" power="" management="" in="" windows="" setting="" and="" amd="" catalyst="" to="" running="" full="" speed="" when="" plugged="" in="" and="" charging="" but="" my="" laptop="" still="" underclocked.="" i="" have="" updated="" my="" bios="" with="" latest="" version="" but="" still="" underclocked.="" after="" 100%="" fully="" charged="" my="" laptop="" processor="" running="" in="" full="" speed="" at="" 2,5="" ghz...="" other="" that="" no="" issue="" in="" my="" laptop,="" everything="" running="">

  I'm never use my laptop for 3D games, most of use for the office, watch video, listen to music and navigation

  My computer laptop specifications
  AMD A4 3305M 1.9 Ghz Turbo up to 2.5 Ghz (TDP 35watts) (Dual Core)
  2 GB OF DDR3 RAM
  HARD DRIVE 500 GB
  DVD RW
  Bluetooth
  14 "monitor

  What is my charger underpower for power to my laptop? my charger is genuine HP with 65 Watt (18, 5V and 3, 5)
  should I buy charger 90 watt (19V and 4.74)?
  or my default charger? so, my charger not Power not in 65 Watt as a specification written in but less than 65 watts running?

  Thank you

  Sorry for my bad English

  Hi @Dana88 ,

  Please contact our technical support at 800-474-6836. If you do not live in the United States / Canada region, please click on the link below to get a number of assistance for your region.

  World wide phone holder

  I understand that if you remove your battery, you can't boot up your laptop.  This is not unusual. some laptops are set up in this way.

  I understand that when you have the phone connected and charge the batteries of your performance is lowered.  There is more than one draw powere when it loads to the battery.

  Here is a link to the laptops HP - test and calibrate the battery (Windows 7) to ensure that there is no problem with the battery.

  Could also remove the battery once you put under tension.

  You asked questions on the use of a 90-Watt adapter.  Here is a link to HP G4 Notebook PC Maintenance and Service of Guide.  Chapter 3 page 32 lists not one that is recommended.

  Good luck!

• Confused with power supply

  I was customizing PC 810qe WANT and I got the GTX770 GPU. Now, I know there are at least 600W PSU, but I didn't see an option anywhere to choose the power supply. The PC automatically comes with the appropriate power supply or I will eventually have an underpowered PSU?

  Hello

  Well well, not automatically, BUT it has 600W power supply as shown: (Ahmed down)

  http://www.shopping.HP.com/en_US/Home-Office/-/products/desktops/HP-envy/G5B64AV?HP-envy-Phoenix-810qe-desktop-PC

  Ports

• How to use the Camileo H30 with Power Supply

  Hello

  First: Excuse my English, im from Germany ;)

  I have a Camilio: 30. its has been purchased used. I've only had the camera & the original battery.
  No supplements (such as usb or power supply cable original)

  what I want: I need to shoot for a few hours. The battery is unable to do. so I want to use it with a block of power, but when I put in (throughh a mini-usb connector) of the camcorder goes into charing (no actions are possible), but I want to make full use of the feature when the power is connected.
  How should I treat it?

  I got an a 2, 25 a 5V power supply, I think its enough... or not?
  The label on the side of the camcorder bottum said 5V 2A...

  Thanks 4 help me :D

  Greetz

  Hello

  If the Camileo H30 and I got this camcorder with battery and adapter supporting USB mini jack.
  The s AC adapter camcorder supports the release of 2A and 5V
  Its model DSA-10 p-05

  Google for this model, maybe you could get one from some dealers online
  Otherwise recommend that you check the other adapters supporting these values.

  For example this one:
  http://www.toshibadirect.com/TD/B2C/Adet.to?poid=484958

• Portable computer L500 satellite starts only with power supply

  Hi Please help me
  I brought my laptop say there are 3 or more weeks... I'm working on the battery and power, but just now I can only run in power.

  Its like the battery does not exsist. It indicates that the battery is charged to 100% but the computer does not light with the power of the battery...

  Any suggestions would be highly popular...

  -d-

  When the operating system is loaded is recognized correctly battery?

  In any case, this behavior is not normal and maybe you should contact the nearest Toshiba service provider and ask for help. They can check the battery and the power supply electronic and see what's wrong here. The warranty is valid if new battery or repair will be free.

• Tecra M2 suddenly does not work with power supply

  Hello

  Suddenly my laptop does not work with power... (with the battery, that it works very well)

  The power supply works fine.

  Someone at - it an idea for this error?

  Winni

  Maybe the DC-in port has no contact with motherboard anymore and the electronic board can not get AC power.

• Reference Dell place 11 Pro - can it work without battery, with power supply connected?

  Dell coming 11 Pro can be used without battery, with power connected?

  Yes, works perfectly on AC only.   Keep in mind that if you have a sudden loss of power that you might have some issues such as loss of data, corruption of data, etc..    As if you lost power on a laptop (without battery) or a desktop computer.

• Seriuos problem with power supply

  Hello, im new and I have a seriuos problem with my computer toshiba laptop satellite there is a problem with the end power cable the cable that goes to the laptop the caches on a metal stick and once the stick came out with the cable and I lost, is there a way to fix it or get the stick somewhere? I can't charge my laptop without it and sorry for my English: (of cause.

  These problems must be handled by authorized personnel only, so I recommend you to contact the nearest Toshiba authorized service provider and ask for help.

  The laptop must be disassembled and DC in port soldered to the motherboard or may be exchanged with a new one.
  You think you can fix it yourself?

• Can I use Toshiba Camileo x 200 with power supply?

  Hi all

  I would buy the Toshiba Camileo x 200 camcorder, but I have a big problem: its autonomy.
  According to my research, it can record 100 minutes while a 32 GB SD card allows for more than 5 hours.

  So my question is simple: if I want to use this camcorder in one place, can I use the AC adapter when using the camcorder?

  Thank you very much for your help!

  Jackal

  PS: Excuse my English, I'm french ;)

  I n t have this cam but I can use mine Camileo H30 when it is connected to the power running, so I see the reason why you can't do the same thing.

• Satellite A200 - will not start with power supply connected

  My lapop is 2 years old. Whist trying to boot it restarts at least 2 times and I am running Windows 7.

  My old battery lasts about 20 minutes so I bought a new and the first time that I loaded up it gave me an hour of a time value of battery, but on the second cooldown it has provided for 20 minutes.

  It does not always to the top while the power is connected do you think that my motherboard is defective =.

  Hello

  Normally, if you connect the laptop AC adapter shouldn't t stop. Everything should work correctly as the system even starts the battery would be defective.

  So, I think you already wrote that the motherboard is faulty. In this case I recommend to contact an authorized service provider. Technicians can order a new mainboard and Exchange! :)