Mask photo appears in my document, when I insert the image of InDesign

Similar Questions

• The file size of Photos library don't to shrink when I remove the images from the library

  Subject line pretty much sums up it.  Let's say I have create a library of Photos and import of 100 photos. The file "Library.photoslibrary Photos" grows to a certain size, as expected. But if I remove some of these pictures does not take the size of the file photoslibrary. If I import images more library file grows again, but it never reduces when I delete the images from the library. This happens with both a library of referenced files and images copied to the library.

  What happens here?

  You must either wait 30 days or go to the recently deleted album and remove not for the final to do deletion

  and note that Photos doesn't manage referenced good libraries, it was reported here that they can use more space than a managed library and they are not recommended

  LN

• On some files, such as Documents, when I open the file it automatically scrolls to the bottom of the page.

  I have problems with the scroll bar. On some files, such as Documents, when I open the file it automatically scrolls to the bottom of the page. I can scroll upward, but as soon as I let go of the mouse button it drops to the bottom of the page. On some windows so it both vertically and transversely sometimes scrolls upwards and downwards is OK but he pages all the way to the right. Also in IE, I can't click on the scroll bar and drag it, I have to the top or down of arrows or the wheel.

  Thank you; Brand:

  I found the problem. It was the mouse.

  I do not understand why it worked on some programs and others do not, but I guess until I found a solution, it is not matter. Brand:

• When I save a PowerPoint document to PDF format, the images become white boxes or have lines around them.

  When I save a PowerPoint document to PDF format, the images become white boxes or have lines around them.  I was using Adobe 9 Pro, just upgraded to Adobe Pro XI and he always does.  I have other people to convert the same file in PDF format and it works fine so I know it isn't the Power Point file, there must be a setting in my Adobe.  Any suggestions?

  Hello

  Could you please update on the operating system you are working on?

  Is - this windows or Mac?

  Also an update on the version of Ms Office installed on your system.

  Do you feel it work with all the PDF' or a specific?

  If you are using windows, try to repair Acrobat once and then see if that solves the problem.

  Also, check the latest updates installed on your computer.

  Launch Acrobat > navigate to help > check for updates.

  Please, try the two steps and see if that fixes the problem.

  Concerning

  Sukrit diallo

• I edited a photo in Lightroom 5 and when I exported the completed picture, she went from a 1.3 MB to a 542KB file.  Everything I read says it is fine and I don't lose any resolution - but I wanted to ask the community.  Thoughts?

  I edited a photo in Lightroom 5 and when I exported the completed picture, she went from a 1.3 MB to a 542KB file.  Everything I read says it is fine and I don't lose any resolution - but I wanted to ask the community.  Thoughts?

  You may not have lost any resolution... or you can understand the word "resolution" bad

  Resolution isn't the file size, which are the numbers you are quoting. So the 1.3 MB changing to 542KB does not indicate a change in resolution. If you export the picture and let the box that says "Resize to Fit" disabled, so you don't waste no resolution at all, even if the file size has changed.

• When I insert an image in the sequence. the photo that it is expanded

  I am currently using Adobe PREMIERE PRO CS6. And I'm doing a video for school. I tried to insert an image of the main sequence. but the image were bigger so big that only part of the picture is visible. This is because the size of the image were too big. How can I solve this problem. same thing with the video, when I insert the video, the video was really small. and with a black space around it. I change the size of the screen adjustment of 100%, but the resolution of the video no longer so clear. I tried to do the same with the image, such as change the adjustment to certain % screen size. but it does nothing. the image remains on this certain task was be amplified. and if I spend 20%, only got smaller image with black spaces around it. How can I solve this problem. I do the video for school so it is really important that I get this fixed a problem.

  Smilyfrowned wrote:

  Thank you very much. I did what you said and it worked. Is there a more effective way instead of scaling? as the photo would automatically put the scale itself

  Put scale by default to fit the size of the image in the preferences, its general slot.

  If nature does not have the same proportions that the sequence you will have small black highlight and then you will always have to scale.

• When I insert an image in the body of my email, it is replaced with an attachment when the recipient gets (also using OE).

  I use outlook express 6 on windows xp pro.

  When I Insert an image in the body of my email, it is replaced with an attachment when the recipient gets (also using OE).
  I did use the option of fixing , I used to Insert.  The reverse also occurs.  When someone using OE sends me an email with
  a peak inside the body of the email, it appears in the box and not in the body of the email. This happens only when they concern the
  my program.  Others using OE does this experience between them.

  My mail sending format is HTML and in its settings, I checked "send pictures with messages. In addition, in the tools of internet explorer, advanced, multimedia.
  I 'send photos' checked also, in the email window, under 'format', ' Rich Text (HTML) "checked.

  I have recently reinstalled cleanly win xp to address a system idle in general.  All updates are in place and tested it with antivirus and anti-malware programs.

  That is what it is?

  [Transferred from Internet Explorer]

  Original title: outlook express

  Tools | Options | Read. Read all messages in plain text it is checked? This it will make become an attachment.

• How can I get rid of the error code 0 x 80010108 when you insert the SD card

  My SD card is good and I can access images using my computer to start up. I can also see my saved photo gallary pictures. What I can't do, is when I insert the SD card and select images I get the above error message. Help.

  I would say that you have two choices,

  Photo Gallery of windows open before inserting the sd card,

  Then click on import, then insert the sd card.

  Or you can click on the Start button and click computer.

  Insert the sd card,

  He appears as a removable disk that you can right click and click Open,

  Then manually, copy and paste the files in a folder or an existing one,

  Do not use auto play close the dialog box or use the Windows Explorer instead.

  Oops, that's three choice :)

• When you place an image in InDesign, it seems pixelated.  It is a 66 MB file in a 6 x 9 "paper.

  I'm new to InDesign, I created all of my documents for printing in Acrobat PDF format.  When I place an image, it will appear pixelated.

  Hello

  This is an expected behavior, when you place an image in InDesign, then it displays a preview of the image but you has no impact of the exit, unless the image is of low resolution itself.

  In order to have the correct resolution of images, you can switch to view > display performance > high quality.

  Thank you

  Manish Sharma

• computer says please insert a disc when I insert the dvd

  computer says please insert a disc when I insert the dvds:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP - Windows Expert - consumer: bike - Mark Twain said it right.

• I have some pretty high resolution still panoramas I want to move from left to right, but when I resize the image to fit the image, the resolution drops to an unacceptable level. Is this possible? John

  I have some pretty high resolution still panoramas I want to move from left to right, but when I resize the image to fit the image, the resolution drops to an unacceptable level. Is this possible? John

  Make sure that before you add this photo to your project, you go to the preferences (under the Edit on a PC) and uncheck the default scale to the size of the image.

  Scaling of artificially reduced image size your photo - no matter how large - the size of your video image, make detailed pans and zooms like your impossible. When it is not checked, your photo will be in full resolution and you will only see a small part of it in the preview window.

  That said, don't forget that you work at video resolution, so some details will be lost. (Less so, if you change video high-def). And, of course, don't forget to make your timeline after you have added your pans and zooms to see a better representation of what your final video will look like.

• CS5 installed on the laptop.  A new iMac, but when I insert the disc, nothing happens

  I thought you are supposed to be able to install on laptops and desktop.  Nothing happens when I insert the disc.  ??

  Sorry guys.  I'll put up a new iMac.  My discs program icons appeared not on the desktop.  I just had to go to the preferences in the Finder and select the check boxes of the icons on my desktop.  Only ever got to understand this.  I feel so dumb!  Thanks for trying to help me.

• When I insert the mark of the web, preview IE6 can not download files or view pdf files

  When I insert the mark of the web and get a glimpse of my pages in IE6, I can't download files from the links or view pdf files in the browser (some links are to pdf files). In mozilla, it works perfectly. Hmmm... What happens when I run the application? (must I put the brand on the web?, IE users will have problems?)

  Mark the web must only be used on your local files, if you have any active content in pages, for example, if you use a menu javascript.  It's only for IE browsers when you test locally, is not necessary at all with Firefox.  (as you've probably discovered).

  You don't need to insert it on the page when you go live with the site. However, you can leave it in the code, there is no really no difference for download of the page, or the files or images etc.,.

  Background documents:

  http://blogs.msdn.com/ie/archive/2005/03/07/388992.aspx

  --

  Nadia

  Adobe® Expert community: Dreamweaver

  http://www.perrelink.com.au

  Unique templates CSS | Tutorials | SEO articles

  http://www.DreamweaverResources.com

  http://csstemplates.com.au/

  --------------------------------------------------

  http://Twitter.com/nadiap

• Blue screen when you insert the DVD - M40X

  Hello
  I have a new computer laptop toshiba satellite M40x-183. (with DVD super multi)
  After ten days of buying it, I found a problem when playing some DVD and CD, when I insert the dvd I got a blue screen saying... There is an error and windows can stop harmful to your pc and I have to contact the support then start dumping from 100% to 0%...
  I have tried the dvd in many other dvd players and it works perfectly. Team support here told me that this type of dvd player are unable to process this format how it happens so that older toshiba and other laptop brands can do!
  Is there a solution to this?

  Hello

  Well, as the support service team say that the DVD player is not able to read this format.
  But I can't give you a good answer why it s not possible to play this DVD. It s a simple fact that there are many DVD and CD formats on the market and number of readers is not able to play some formats.
  Have you tried to play burn DVDs? I recommend you to test the DVD from other manufacturers. I use TDKs and it works correctly.

  Good bye

• When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have already a CD in the drive, it can not extract the CD.

  When I insert the CD in the drive for ripping, Windows (Vista) Media Player asks me to insert the CD. It does not recognize that I have a CD in the drive, it already and can not extract the CD. The air play perfectly to the reader.

  Hello, BGNG,.

  This thread has been created in wrong forum; the Microsoft moderation team has moved this thread on the forums of programs .