Masking and start/stop drag in AS3

Similar Questions

• Video fix on the internet from stop and start, stop and start .__It seems that the buffer stops and starts.

  When I want to watch a video on internet video to stop and start all along.

  When I want to watch a video on internet video to stop and start all along.

  This is usually caused by the speed of download is not unable to cope with the speed of playback, the video must stop from time to time to load more download in a temporary cache. This only happens for some videos or videos? If you have a video problem url, that you can post, anyone here can check for you. If the video is a type of swf/flv files often used by YouTube, MySpace, etc. news organizations you can often allow the video to play completely. Then, without moving away from the page, replay the video. Often, the video will always be in a temporary cache on the computer and will now play without stopping. Now, the videos are not well suited for a connection by modem and require some kind of csble or connection DSL broadband to play well most of the time.

• XP Internet vidio run start stop smoothly the Rafale in short reading.

  Vidio XP Internet do not work correctly when you click on vidio execution pauses and starts, stops and starts its really slow?

  Looks like it is buffering. Either wait a few minutes until you press play, download the video to your hard drive and then watch, make sure you go to your internet connection at full capacity, so try to use maybe a wired network instead of wireless, I sometimes look less people will use internet or upgrade to a better download speed of your internet provider.

• Videos work intermittently; Stop and start

  Videos do not work all the time. They stop and start every few seconds. The same videos play fine on Internet Explorer.

  Reload the Web page while bypassing the cache

  • Hold down the SHIFT key and click the reload with a left click button.
  • Press Ctrl + F5 or Ctrl + SHIFT + R (Windows and Linux)
  • Press command + SHIFT + R (Mac)

  Clear the cache and cookies from sites that cause problems.

  Clear the Cache: Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  Remove the Cookies from sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

• What is c? -osxupdcombo10.10.5.dmg - he started to automatically download on my mac and I stopped it... This is a copy of the name of the file and I have no idea what it is?    osxupdcombo10.10.5.dmg

  What is this file? -osxupdcombo10.10.5.dmg - he started to automatically download on my mac and I stopped it... This is a copy of the name of the file and I have no idea what it is?    osxupdcombo10.10.5.dmg

  This is the last update to Yosemite.

  If you do not run 10.10.5 then you run to certain security risks.

• The Apple Mobile Device Service service on Local computer started and then stopped.

  My iDevice doesn't connect to iTunes, I think its a result of the apple mobile device service. The restart option doesn't come up, it just says  "start the service" and when I click that an error comes up which says "The Apple Mobile Device Service service on Local Computer started and then stopped. Some services stop automatically if not in use by other services or programs". (I've already got a post with this information on I just wanted to make it more clear)

  If your iOS device does not appear in iTunes, try the following:

  1. Open Control Panel > Device Manager
  2. Plug in your device
  3. Locate Bus USB Controllers > Apple Mobile Device USB Driver.
     It is also possible that the device may appear under imaging devices, portable devices or other devices or as a device USB of MTB.
     
  4. Right-click and select software update of the driver...
  5. Click Browse my computer for driver software
  6. Go to C:\Program Files\Common Apple Mobile Device Support\Drivers or
     C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers
  7. Click on let me pick from a list of drivers for devices on my computer
  8. Click on Apple Mobile Device USB Driver
  9. Click Next, then close and exit the Device Manager

  To step 3 above, open the Device Manager. Expand one of the articles that are listed.

  • USB Bus controllers
  • Imaging devices
  • Portable devices
  • Other devices

  Plug in the appliance. You should hear the telltale Windows sound device connection and a Division must acquire a new entry. This should be your device. It cannot be labelled properly at this point. If you do not hear a suspicious noise cable damaged.

  Or try If iTunes does not your iPad, iPhone or iPod - Apple Support

  If not try a complete tear down and rebuild iTunes in accordance with the resolution of the problems with iTunes for Windows updates.

  Or try to go back to the last version of iTunes that has worked for you. See the programs installation of iTunes to download links. If you roll back to 12.3.3.17 to 12.3.2.35, for example, then you will also need restore the database in the manner described in the empty/corrupted after upgrade/crash iTunes library. The tip makes suggestions to reintroduce recent purchases, so at worst, you lose a few meters or a newly created playlist.

  TT2

• I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?

  I can't download IOS 9.3.1 the download starts but then an error message appears and it stops. I have enough storage, so don't know why this is happening?

  Does anyone else have this problem?

  It often happens when the screen times out and goes to the lock screen, when I connect to my phone that the error message is re-appeared?

  I have the same problem!

• Stop and start the task in while loop

  I try to start and stop an output meter (creates pulsed output) in a while loop and I don't know how this is possible. I have a while loop running who is taking measures from a digital compass. If my title is within acceptable limits, the outputs of the meter (2 of them to turn to the left and right) must be turned off. If the title is out of the acceptable range, let say too far to the right, I want to start one of my outings of the counter to activate the object to the left. The issue I am having is that if I put the block 'Start the task' in the while loop the system will try to start each iteration of the loop, even if it is already on. I don't know if there is a problem, but it does not appear effective from a programming perspective. I remember reading somewhere that stop and start tasks can really slow a loop. Any suggestions?

  I actually just to understand it. If you use some if statements and the "fact of task is" block you can make it work.

• When I leave my computer for 10-20 minutes it stops itself and I have to go and start it up again.

  Original title: My computer turns off too soon. How can I change this.

  When I leave my computer for 10-20 minutes it stops itself and I have to go and start it up again. It's very frustrating. I want him to stay that I can continue to run a program that converts formats. When she stops formatting stops. How can I change the system to keep it set.

   

  Hello

  1. what operating system is installed on the computer?
  2. didn't it closes completely down or will he sleep?
  3 did you changes to the computer before the show?

  It could be due to food or an electrical problem in the PC.

  Method 1: Open the troubleshooter of power
  http://Windows.Microsoft.com/is-is/Windows7/open-the-power-Troubleshooter

  Method 2:
  Step 1: Check the Safe Mode issue.

  Reference:

  Start your computer in safe mode:
  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If step 1 work, try step 2

  Step 2:

  Try to perform the clean boot and check if it helps, here is the link:
  http://support.Microsoft.com/kb/929135

  Note: When you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 3: I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  , Note 1: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

• What are the causes videos stop and start again during the transmission?

  What are the causes videos stop and start again during the transmission?

  Hello

  You can update the latest drivers for the video card and check.

  Also perform the clean boot and check:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in the article above.

  Let us know the results.

• When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please

  When I delete the "screensaverissecure" with the registry value, it reappears again in the registry after I stop and start the system the next day. Help, please
  use widows xp

  Hello

   
  1. Have you tried to Hibernate for ever in the power settings option?
   
  To resolve this problem, you can follow the steps below.
   
  (a) click and start
  (b) type power Option in the start search bar.
  (c) now select click Change plan for the current plan of the selected power.
  (d) now click on advanced power settings.
  (e) scroll down and click on the sign more next to sleep.
  (f) now click on allow the eve hybrid and turn it off.
  (g) click on the option put into hibernation after and set it to never.
   

• Error - windows search on the local computer started and then stopped. Could not start the Windows Search service.

  Original title: windows search service does not start.

  When I try to start the service "windows search" I get the following error "windows search on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the services of newspapers and performance alerts' I tried manually and nothing, can someone help me please.
  It is a XP machine and yes I have windows search 4.0. I need help to get that windows search service has restarted.

  I no longer need it, I just backed up all my files and re - install windows XP.

• Video streaming constantly stops and starts

  Original title: bandwidth

  using a 3 dongle and chip gig desktop 3 and 2 memory gig streaming video will constantly stop and start how can I handle this?

  Open the Panel\Hardware and Sound\AutoPlay

  Scroll to video and Audio files make sure that it is set to Play using Windows Media Player.

  You can also try to create another user account and check again the issue.

  S.Sengupta Media Center MVP

• Why stop and start my videos online constantly?

  Why stop and start my videos online constantly? I try to watch something and she leaves and I get the "loading" symbol but it works only for a few seconds and then shuts down to 'load' again!

  Hello

  I suggest you to uninstall and reinstall Adobe Flash Player on your
  computer and check if it makes a difference.

  Refer to this article for help:
  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Download the latest version of Flash Player from this link:
  http://www.Adobe.com/support/flashplayer/downloads.html

• Code 10: Your device cannot start - CD/DVR. It was working fine until I did a windows update and it stop working.

  Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.

  Original title: code 10

  Hello

  Read this link which has also a few solutions:

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  --------------------------------------------------------------------------------------

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">