Material clip

Similar Questions

• created archive camera - clips in case of lack?

  Been bickering a lot of material.  Summer camera archives first, at the same time make a power of attorney.  Everything is fine.  If the last attempt, I suddenly have a problem.  There is only an single element in the event of archive of the camera once created.  I look at the file of the archive itself and that is the appropriate size.  When I do a 'import' and check the file from archive of camera, everything is there, dozens of clips.  But there is only a single element of this archive in the event itself.  ???  So what happened to all the other clips?

  And I can't do a "re - import Archives of the camera" because it tells me that "nothing is missing."

  I don't want to redo the entire process.

  Is there a reason why I don't see not all clips of archive IN the case WHERE the list?  And how do I get back them?  I'm in production, need the map, which is still sitting at the computer until I have understand that.  Help!

  Ben

  Have you checked the filter Clip browser to check what it ' to define all the Clips?

  Russ

• CANNOT IMPORT FUPP P2 CLIP FOR EDITING

  I downloaded my P2 images on a hard drive and would like to edit in FCP X. FCP sees the video files, but not intact clips. When I try to import XML it me does not highlight and to import clips.

  Well, I realized that there are in the clips folder no P2 and that changed how the FCP has seen the material. Once removed, they became unwearable clips P2. Two new problems: 1) the external drive is now considered to be a camera instead of a player and it makes it harder to sort clips. (2) my readers of storage are currently see the like not writable. So confused and confusing time. Help!

• Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no 1080 progressive setting sequence, how can I ensure that I have the best setting of the timeline for my clips

  Apple "final cut pro 7", high res Pro 422lt 1920 x 1080 (odd) clips, is this gradual?, no sequence definition 1080 progressive

  How can I make sure that I have the best setting of the timeline for my clips. I did all the settings of Mount clips but there is no progressive setting for 1080 p. Images originally dslr Nikon that I used mpeg streamclip to convert to prores. Thanks for your help!

  The frame for you size source of material is HDTV 1080i (16:9). That only sets the size of the image, not the domination of the field, it's what makes progressive or interlaced. The reason it's labels with the 'i' is that when FCP7 was abandoned by Apple, they have never updated the software in order to take account of 1080 p contents.

  To make your progressive sequence, set the dominant field to None.

  gerforce wrote:

  Images originally dslr Nikon that I used mpeg streamclip to convert to prores.

  In your screenshot of the properties of the element for your clip to the source, the material is interlaced. At the original camera file interlaced or progressive?

  Also, the fps footage was actually 30 original and 29.97 not standard?  30 images/s is very limited its use.

  MtD

• Analog OUTPUT material

  Hello

  My question is about the analog output (0 - 10V) of the myDAQ unit.

  On the card, you can read:

  "Overdrive Protection +-16 V forever."

  Lets imagine the worst case: 0 V output DQA, but outside a battery or anything else is connected with 15 V to the analog output.

  Fact an "unlimited" current in data acquisition or protection 'Overdrive' works here and the material is safe to destroy?

  The background: I want to OD are protected from transient voltages and toilet on a simple zener diodes clip or a tvs diode...

  Thank you all, Markus

  Markus,

  To use a zener diode as protection, you must also have an impedance of current limiting in series with the source against which you are protecting.  The manual for the device of maDAQ indicates that the lines of the AO are pushed by OPA1642 op amps.  TI the MSDS for this unit shows the current limiting internal ~ 36 my short circuit with Earth and a thermal shutdown circuit that tries to protect against the terms of overpwer.

  However, under your 15 V battery, 11 V zener and 0 V programmed DAQ exit, the situation may be different.  The current from the battery through the zener will be limited by the impedance of cables or any type of resistance on the line.  This has no direct effect on the myDAQ device, but it will probably destroy the zener unless resistance limits the current to a lower maximum current nominal zener.  As long as the voltage at the output of the myDAQ is lower than the internal supply voltage (+/-15 V), on the OPA1642 current limitation should apply.  With 11V applied to the output and the value set to zero the device would probably be to try to sink the maximum current for-15 V power supply.  Which translates to a dissipation of power of more than 900 mW, which exceeds the rated capacity of the op amp. Themal protection should, in principle, reduce the current to a level that does not exceed the thermal limit under development.

  This test can be a costly process. The unit may be destroyed.  Given that the maximum current specified for an analog output channel is 2 my and the maximum voltage is 10 V, I would consider a series resistance of perhaps 1000 ohms and clamping schottky diodes at the + 15 V and - 15 V power supply.  This will limit the current to 10-20 my in all conditions you have mentioned and would also provide protection to the case where the battery is connected the myDAQ device is turned off. He alsoe does not care about the polarity of the external source.  It will drop the output voltage according to the load impedance.  If this should be used in a student lab, the calcualtion of this decline is something they should be doing anyway, and would be a small price to pay for protection.

  Lynn

• LV FPGA workflow nested CLIP w / NI SMU-6591R

  Hello

  I develop an application on a NI-SMU-6591R Board. My installation also includes a SMU-1085 w chassis / controller 8135.

  Goal: set up a VHDL project prior to the Commission of 6591R. Given that the application requires access to 2 ports Mini SAS HD and the VHDCI connector on the front of the 6591R (physical front) a CLIP nested is the only option here, isn't it?

  I am quite new to the LV FPGA framework. In order to understand the flow of the whole project, I would like to launch a trivial VHDL design on the 6591R: a D-FlipFlop edge triggered w / Syncronous reset. I have attached the the D - FF and the wrapper of CLIP VHDL code.

  I would like that (1) a little (LV::boolean/VHDL::std_logic) to pass the port D of the D - FF VI (name FDF/D) and (2) drive the LEDs of the Board of Directors according to the signals of outputs (FDF/Q and FDF/QB). Also, I want to read (3) the same outputs (FDF/Q and FDF/QB) back to the VI flying two Boolean flags.

  Following the white paper OR, I have:

  1. Managed to create a XML interface of the import VIDEO Wizard, import the 2 files VHDL (D - FF and its packaging).
  2. Selected the ELEMENT created in the IP-level component properties window. The LV_DATA_IN (host2fpga) and LV_DATA_OUT (fpga2host) I/O appear in the project tree, under the CLIP icon.
  3. Created a new VI under the FPGA device with an infinite while loop. Inside the loop, I dropped the LV_DATA_IN and the LV_DATA_OUT e/s and connected with a control (to LV_DATA_IN) and two indicators (of LV_DATA_OUT).

  First of all, why in a simulated execution mode, the behavior of the indicators is totally random? They are not connected to one of the connectors 6591R...

  Linking the FPGA VI, he reacts to any change in the control LV_DATA_IN button... Why?

  The design works as expected in Vivado both in behavioral simulations and post-synthese.

  Before asking here, I tried to understand it on my own. I have read all the documentation that I found on campus (I got access to LV Core1, Core2, Core3 and FPGA course material) and on the internet.

  What is still missing me?

  TY for your kind help!

  
  

• FPGA: nested CLIP

  Hello

  I am currently using SMU-7966R with module of e/s-6583.

  For my application, I need to access IO with imported vhdl design FPGAS. As a result, I try to use a CLIP half bridge.

  Following the tutorial process NOR, I imported a CLIP half-bridge (for example Ni6583ConnectorDdr.xml). But I can't find a way to instantiate this CLIP I heard the message:

  "This statement of the CLIP is a CLIP half bridge and it cannot be instantiated in a socket."

  Documentation OR I haven't found example for customizable CLIP but not how instantiate a socket, and then a half-bridge CLIP. You can define more precisely this procedure?

  Thanks in advance,

  Roman C

  Hi Roman,.

  To CLIP half bridge, it means that it must replace one of the sections CLIP material in the project, in this case the module. This means that when you choose which module you are using, you choose your CLIP instead.

  I think that he can come in the entry, it must be stored in the right place on the disk to appear in lists in the dialog box. You can see the path of the existing CLIPs from the dialog box:

  

  See you soon,.

  James

• New Clip Zip work strangely - music cuts in and out

  My apologies if this is covered elsewhere - I looked through the forums and does not see an answer to this question.

  I bought a new Zip Clip for one of my children.  After updating the firmware to version, 01.01.21 and loading mp3s mp3s are cutting in and out intermittently.  The sounds of the music very well, then silence for half a second or more, then back to the music.

  I thought that maybe the headphones, so I tried using an external speaker, she got the same results.  I tried to play the radio, which doesn't seem to have the same problem - she has played very well for about an hour and is not having the same problem.

  I tried a corner the headphone / speaker taken firm decision, but that does not solve the problem either.

  Any suggestions?  This could be a firmware issue?  Headphone Jack?  Or could I just have a bad unit and you have to put it back?

  Thank you

  A possibility, believe it or not:

  The headphone jack of new Clips can be incredibly tight, to the point that a new user can be afraid that he or she will break the player the first time.  Is it possible that the headphone jack is not in all the way?  It relaxes to a 'normal' level after an hour or two.

  Otherwise, you are sure that the music files are OK and in a format like the Clip?  Have you tried the files on another material and are they OK?

• Sansa Clip + got wet, only volume buttons do not work, the volume on a PC?

  Hi my Sansa Clip + has been for some time on the rain and I guess that wet - volume keys do not work, all other functions OK

  TI now on "too lo wvolume" I solved it before that.

  1. is it possible to adjust my volume (now its too low after reset) on a PC connected via USB? Kind of hack volume...

  2. it should not happen, but I try send a guarantee? Maybe the wet sensors are OK cause it was just a rain...

  Any other probability/cost to fix in any fix Center "e"?

  Thank you!

  First of all, NEVER try to turn on or turn on an electronic device while it is still wet!

  You will very probably short something internally that will kill him forever!

  1 n °

  2. the warranty is for MFG. any defect of manufacture or material only! It does not include misuse of customer, as leaving in the rain, take it into the shower with you, a fall in the toilet, he swims, wear or leave it in your pocket and then do your laundry.

  2. SanDisk has not not any Center electronic "fix."

  The only thing you can do is to place the device in a bag of uncooked rice dry several days absorb moisture inside.  Since you've already played with wet it is doubtful that this will help, but it won't hurt to try.

• Clip + no reading FLAC 96 kHz/24 bit?

  I couldn't find any where any technical...

  I have some files of professionals/audiofile music format FLAC 24 bit 96 kHz.

  He is professional MFSL vinyl LPs of recordings and original recording of my synth, Korg Oasys PCI.

  None has no DRM.

  When I try to play them on the Sansa Clip Plus they get jumped. No error message. It jumps right through them.

  I know that the files are OK. They do not play through my media streamer when I connect the Clip + via USB to my NAS.

  Is that what I can do to play on the Clip + as installing Rockbox, using .wav files, or is a material limitation

  On this aspect, why is there no specification anywhere (bitrate, resolution, etc.

  Seriously, there should be some tech specs in the manual...

  I guess I'll have to recode these for lower quality - but WHICH one is better than the Clip + is supported in terms of flow rate and sampling frequency?

  The DAC on the Clip + is only 16 bits, so there is no advantage to the use of 24-bit. Rockbox will decode any file FLAC, but they will be converted to 44.1 k/16 for playback. The sandisk firmware does decode flac 24 bit at all. BTW, you probably already know, LPs are less 16 bit, so there is no loss of quality to convert to 16-bit.

• Questions on Sansa Clip + units purchased in different stores: there are slight differences?

  Hello all-

  My spouse and I bought a SanDisk Sansa Clip + 4 GB in different stores the same day.  We intend to keep only one and the packaging is slightly different, so after a brief purchase background, I have some questions as to the differences between the two in order to solicit advice as to who to keep and which you want.

  CONTEXT OF PURCHASE:

  Two units have been sold at the same price, both have the same UPC and the return of the policies/guarantees for two stores seem to be identical.  The color of each is the same (black) and the exercise of copyright for packing at the rear is 2010 for both, that is: (c) 2010 SanDisk Corpation.  We have not broken the seal on each box and do not want to facilitate the return of one.

  What is different?

  I bought my unit to H.H.Gregg here in the United States, and the number above the same UPC's:

  SDMX18R-004GK-C57

  And here's the UPC number:

  80-56-09564 - 004 G

  My spouse bought at best buy and the number above the UPC:

  SDMX18R-004GK-A57B

  And here is the UPC:

  80 56-09570 - 004 G

  In addition, those bought at H.H.Gregg indicates 'Software Rhapsody', and the Rhapsody logo under 'quick start guide' in the column of "Content" on the left side of the box while one bought at best buy Rhapsody No mention outside of the box.  And with the exception of a white banner with "Sansa Clip + 4 GB" on the face at the bottom of the box purchased at best buy, the type of packaging, graphics and colors look identical.  Both made in China.

  MY QUESTIONS:

  1 - does anyone know of any slight difference between the two?

  2. that contains software Rhapsody and the other and if so is the inclusion of this software an additional benefit?  (Never used Rhapsody, but my understanding is that it is similar to iTunes?)  All opinions on this topic is welcome, although I've never used iTunes and maybe not a similar service.  The software takes more space and it is difficult to remove if I don't want to?)

  3. I suspect the above number ending by "-A57B" (i.e. with a ' B' versus without him) indicates Sansa units shipped to the and sold through Best Buy, where the 'B '.  Is this correct?

  4. However, the numbers which could describe the difference between two low, the middle parts which are "- 09570 -" and "- 09564-"? "»  Is the '- 09570 -"a model a little later?  (Again, the "-09570-" is that of HHGregg, without any indication of Rhapsody.)

  5. who would keep you, or is it just a case of flip a coin?

  Sorry for nit-picky issues, but I recall reading some interest in the version material different numbers with the other units of Sansa and the benefits of one over the other and I was wondering if there might be a hardware update version at play here as well.

  Thanks for your time! :-)

  =================================================

  Changed to correct typo:

  The first issue of the unit to buy at best buy should have a 'B' added at the end, as I was writing it under 'MY QUESTIONS'.  It is:

  SDMX18R-004GK-A57B

  =================================================

  Edit #2 to fix typo:

  "column" vs "colum".

  jvrijn wrote:

  Marvin_Martian wrote:

  Otherwise: as far as I know, a Clip + is just a Clip + is a Clip + - no difference, at least from the point of view user and use.  It is always possible that some the bowels are slightly different (different manfs., for example), but nobody reported that.

  In fact, someone has documented who...

  "Clip + variants.

  The Clip + comes is some variants:

  • There are two slightly different OLED controllers, a new is no longer requires an offset of 2 pixels and WRT different brightness/contrast adjustment. It is versions in Rockbox.
  • The FM tuner circuit may vary, either SI4702 (old) or RDA5802 (new), this is also the case on the v2 rocket. The FM tuner circuit is versions by Rockbox. The variant is visible in HwInfo diagnostic screen in the original firmware.
  • The settings for SD card controller can vary, this is also the case on the v2 rocket. In HwInfo diagnostic screen in the original firmware, it can be considered "HERMON" (old) or "COMBO4E" (new). »

  Of http://www.rockbox.org/wiki/SansaClip

  MM-

  Interesting, thank you for researching it! I tried before that my post came but dry.

  Until then the objective eye differences?  I would be particularly interested in distinctions of subjective performance between the tuner chips, if any, that the radio will receive a daily use.  Also welcome all favor referring to other physical differences such as brightness/contrast screen.

  Still, I guess there is no way to distinguish between the two by the package box numbers and that a practical diagnosis is necessary?

  Thanks to all the other replies, in particular the ideas of Rhapsody.

  (Incidentally, I'm curious to know if there are differences in sound quality - dynamic, range, volume, all - between the Clip + and Sansa alays such as the "rocket" or same-track playback on each indistinguishable?)

  Thank you!

  JVR

  JVR, I don't think that there should be no difference in performance between them. Most likely the changes have occurred due to a different provider offering a better price on a part of SanDisk. My two readers Clip + the two appear identical in every way. And insofar as comparing them to the "rocket", I have two rockets as well, and they seem to everyone to play and hear the same way, at least using the Sansa firmware.

• Question about material revisions

  Well, my trusty 2 GB Clip just to give the soul, a fall too many times.  I'm looking to get a new mp3 player and noticed that the Clip had a revision in hw.  Can someone give a quick overview on what, if anything, is functionally different?  I did a quick scan of the forums and did not find anything useful, apologies if this has been discussed already.

  The Clip has had a review of material recently, a change in production.  Clips of revision 1 and 2 will be work in the same way.  SanDisk has modified the firmware for the revised system.  Update the firmware, the only difference is that there are now two versions of the firmware for the unit in question.

  If you are using the Sansa firmware update, it will automatically load the correct version.

  Please note that this is a change in production, without affecting the functionality.  As individual components are changed, the firmware provides the correct parameters for the device to work as expected.  If your new device is a rev. 1 rev. 2, it will be work in the same way.

  Bob

• How can I get a clip of a short vob file in movie maker

  A few years ago, I converted a few cassettes vhs on dvd. One disc has a rare tv clip I want to put on youtube but when I put that particular file in Movie Maker, it appears as being only 60 seconds of time. Jump forward on the timeline, I see all 30 minutes of material is there. Is this some kind of glitch in MM? Other files on the disk appear normal.

  It seems that each of the disks I burned one or two files like this. Is there anything I can do to fix the length of these?

  It may be interesting to try to convert the VOB file to the
  Before you import into Movie Maker WMV format.

  There are many programs that can do conversions...
  The following freeware is an example...:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.videohelp.com/tools/Format_Factory
  (the 'direct link' is faster)
  (the file you want to download is: > FFSetup260.zip<>
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  First, you will need to decompress the file or just open the
  Drag FFSetup260.exe out of the folder
  and drop it on your desktop. To install left click.

  Next, after the download and installation of Format
  Factory... you can open the program and
  left click on the toolbar, the "Option" button and
  "Select an output folder to" / apply / OK.
  (this is where you find your files after they)
  are converted)

  Drag and drop your video clips on the main screen...

  Select "all to WMV" / OK...

  Click on... Beginning... in the toolbar...

  That should do it...

  Also... VLC Media Player has a free software
  option that allows to record any part of a video that
  He is currently playing... maybe you can use it to
  acquire the clip you need:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

  VLC 1.0 records video of the DVD
  http://Lifehacker.com/#! 5318807/VLC-10-records-video-from-DVDs

• My PC does not recognize the Bluetooth headset (JBL Clip +)

  Hi all, I have a JBL CLIP + Microphone/Speaker Bluetooth, which works fine when connected to my smartphone.

  

  The problem is when I try to connect the Clip of JBL + to the PC, because, if on one side the Bluetooth connection let the device be installed and visible,

  

  on the other side, I can't select the device in order to to use with Skype, MS Lync or just as an external speaker for listening to music.

  It is not present in the list of audio devices. Only the internal speaker is available

  

  I have red on others encounter the same problem, but the solution will not work in my case.

  Someone know how to that the device Bluetooth JBL Clip + appear in the Audio device list?

  It should appear as a headset with speaker and a built-in microphone inside.

  My configuration is:

  Laptop HP ProBook 645 G2 (Broadcom Bluetooth V4.0)

  Windows 7 Enterprise SP1 - 64 bit

  JBL Clip + (Bluetooth version: 3.0;)  Support: A2DP AVRCP V1.4, V1.2, HSP, HFP V1.6 V1.2)

  Thanks in advance

  Enrico Dario

  Venezia

  Italy

  Hello

  It works if you use other applications apart from Skype or MS Lync?

  We suggest that you uninstall and reinstall the Bluetooth card drivers and see if the problem persists. To uninstall the device, follow these steps:

  1. press on the Windows key + R, type devmgmt.msc.
  2. develop pilot Bluetooth adapter, click on the drivers.
  3. click on Properties, click on Uninstall.
  4. click on OK.

  You can run the hardware and devices Troubleshooter by following the steps below:

  1. press Windows Key + R.
  2. tap Control Panel.
  2. next, type Troubleshooting in the search box and press ENTER.
  3. Select the material and audio in the utility window.
  4. Select hardware and devices.

  You can also consult this link for troubleshooting steps more on the way of difficulty Bluetooth connections and audio devices and wireless screens.

  Let us know how it goes.

  Kind regards.

• HP Desingjet T120 A3 multi-fiche bin Clipping / Incorrect margins

  Hello. Whenever I print an A3 from the several sheet set, the drawing is cut at the end (at the top of the portrait page)
  I want to reduce the margin in the settings of the printer but can't find a way.
  Designjet print preview mode indicate clipping, because of the margin of hardware settings and said that the margin can be changed in the printer driver settings.
  Can someone help me to find the right place to change the margins of material?
  See you soon

  Thanks for this review...
  I found the solution in this forum...

  http://h30499.www3.HP.com/T5/printers-Designjet-large-format/T120-margin-troubles/m-p/6037507/highlight/true#M53004

  Good day.