Material updates

Similar Questions

• Satellite 1800-921 material updates

  Hello

  My daughter received a Satellite 1800-921, but it needs to be updated.

  I need to allow him to become compatible wireless and also update the RAM.

  In addition, they are easy to do?

  Thank you

  The update of the RAM is possible. You can update for max max 1024 MB and these modules can be used:
  PC100 256 MB (PA3069U - 1 M 25)
  PC100 128 MB (PA3005U)
  PC100 64 MB (PA3004U)

  The situation with the WiFi network is a little different. The laptop does not support any card of minPCI of WLan and the internal upgrade isn't possible.
  But you can use a USB WiFi key or a PCMCIA Wlan card.

• error 3068 diag tool. material update fails

  I have brand new Pavilion e9280t with windows 7 pro.  Computer continues to try to do an update of Diagnostic tools hardware PC-Doctor.  Whenever it has failed & I get error 3068.  ... Useless phone support.  I can run a test of the system hardware Diagnostics tools that is successful and everything goes.  However, computer continues to try to update without success.  My hardware diagnostic tools has 6.0.5205.31 at the top, which is the same version that is listed as the update on the HP website.  Any suggestions would be greatly appreciated.  Thank you.

  Finally the solution.  I wanted to someone else who may have this problem to be aware of his cause.

  3068 error occurs whenever the computer has attempted to update the tool of diagnosis of hardware or HP Support Assistant.  He had to of all things with an apostrophe (') in the name of the computer when I turned on the computer out of the box and assign a name to the computer.  For example, the bromo-PC should be bromos-PC.  I had to restore the computer to its original state factory when he came out of the box and set the name corrected and all start over again.  Fortunately, it was very new and virtually nothing had been installed.

• ESXi 4.1 Update 1 and material update 4 to 7 cards of network breaks vCenter.

  I installed ESXi 4.1 update 01 on 2 servers.  Then I updated the hardware version of all servers in version 4 to 7.  Now the vCenter has no network adapters!  Research in the Windows Device Manager indicates Intel E1000 adapters with a yellow exclaimation point.  Try updating the drivers doesn't produce a message that says that the drivers are up to date.  All other Windows servers work correctly with their network cards, just the Windows 2008 R2 64-bit vCenter server is not able to connect to a network.

  Hope someone has an answer.  Called VMware support, but they will call back within 8 hours.

  Greg

  You can check 'NIC hidden' and then delete them if they exist as described in article 1179 KB.

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1179

  Gene

• Too long update

  I was stuck on 16 of 35 updates since last night.  A lot more than 2 hours.  I tried to turn it off.  I tried to close it with Control Alt Delete.  Nothing happens.  How long should I wait.  And then what I do?

  If you turned it off, then only the updates downloaded would be configured. I would say that you do is power off system, boot the system again and boot without failure, then do a system restore before installing these updates.

  You can also check the information in the following article.

  Problems with installing updates
  http://Windows.Microsoft.com/en-us/Windows7/troubleshoot-problems-with-installing-updates

  Reset Windows Update components:
  http://support.Microsoft.com/kb/971058
  http://support.Microsoft.com/kb/883825

  Also, try to see the updates of Windows and install them in batches. Not only download and install updates to 35 day once. See the smaller updates ranging from KB and install these first, reboot your system. Make another 5, avoid the material updates first with updates of the .NET Framework, I noticed that these may affect updates how long take to install and configure on shutdown.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Not visible platform in windows update update! __Msn Messenger forces me to install it! How?

  Hello

  I'm trying to install msn live messenger 2011 and was informed to install vista SP2 first, and then update the platform.

  SP2 is finished.

  Now, the update of platform for vista I can not find anywhere.

  Need update Windows don't offer not do me?

  The link displayed in msn live messenger installation does not work, I would like to know where it points so I go manually instead.

  Help :(

  I found the update!

  He was placed in the optional folder of windows update - where other material updates/driver updates were also listed.

  Strange.

  I thought it would be listed under updates important "title". This is why I haven't found before probably...

  Thanks anyway,

  Johan

• Can manage Windows XP Home Edition of Windows 8? Get the error codes for the security updates (0 x 643). ALL through Microsoft Tech INFECTED with the virus and Trojans tried. I need help BADLY. Thank you.

  I tried every thing blessed with technology microsoft... always hanging in limbo here.  Tired of doing constant comprehensive analyses, etc. in order to remove the constant threats.  Apparently my McAfee can't stay with her either.  Need help with the download/repair these seeds as soon as possible.  Thanks to all those who wish to help me - it would be that popular, for sure!

  The question makes no sense.

  "Can manage Windows XP Home Edition of Windows 8?"

  Two problems: there is no Windows 8 and even if there were, Windows XP Home Edition would not not 'manage '.  ;-)

  I drop McAfee for a few different freeware products.  Or better yet I'd get two products 'cost' (~ 25 and 60 dollars) and install them and use them in the future - but WHEN you are trying to clean up.

  You seem like you maybe sincerely - at a time when a format/install of Windows XP/patching/installation of applications/patch/restore backups of your data is the best course of action.

  However, if you are willing to work - maybe we can at least get things cleaned up to a certain point where you can get a good backup before doing this (otherwise avoid doing all together.)

  In the order shown, do not jump (no matter what you do, what you have done in the past, etc.) ...

  First of all - download, install, operate and put to update and then run a full system scan with the following two (one at a time, reboot in-between):

  • MalwareBytes (FREE)
  • SuperAntiSpyware (FREE)

  After you perform a full scan with one then the other and remove anything they have all two are completely, you can uninstall these products, if you wish.  This initiative will allow to check there is no malware floating around your system which could cause problems.  If you ask - no, Norton probably does not protect you from what these applications can find.

  Download and run the MSRT tool manually:
  http://www.Microsoft.com/security/malwareremove/default.mspx
  (Ignore the details and download the tool to download and save to your desktop, run it.)

  Reset.

  Search online with eSet Online Scanner.

  Reset.

  Download/install the latest program Windows installation (for your operating system):
  (Windows XP 32-bit: WindowsXP-KB942288-v3 - x 86 .exe )
  (Download and save it to your desktop, run it.)

  Reset.

  and...

  Download the latest version of Windows Update (x 86) agent here:
  http://go.Microsoft.com/fwlink/?LinkId=91237
  ... and save it to the root of your C:\ drive. After you register on the root of the C:\ drive, follow these steps:

  Close all Internet Explorer Windows and other applications.

  AutoScan--> RUN and type:
  %SystemDrive%\windowsupdateagent30-x86.exe /WUFORCE
  --> Click OK.

  (If asked, select 'Run'). --> Click on NEXT--> select 'I agree' and click NEXT--> where he completed the installation, click "Finish"...

  Reset.

  Now try usig the Fixit (Yes - try to use it again) to reset your Windows Components Update (you'll do the aggressive version, not the other):
  How to reset the Windows Update components?

  Reset.

  CHKDSK
  How to scan your disks for errors* will take time and a reboot.

  Defragment
  How to defragment your hard drives* will take time

  Reset.

  Now, open Internet Explorer, visit http://windowsupdate.microsoft.com/ and do a CUSTOM search for updates.  Install any critical/high-priority ones and - for now - to ignore all those in option (always do this for material updates optional here.)

  Restart if necessary and continue to visit this web page until you have not yet updated to high priority.

  Now - if your problem is with the facilities of the .NET Framework...  You can end up with something like:
  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx
  to uninstall a few versions of the .NET Framework, then you can try to install again - but you should not do this until the machine is supposed to be cleaned.

• 15 - j116TX: Woint HP Envy plugged, no. light load, no one else saw, turn on

  Hello
  My laptop HP Envy 15 has started having this problem about 2 months ago. I was in class and it was connected to the power supply when suddenly the computer crashed. No warning, no screen closed. He immediately disabled. Unfortunately, it is a few years old and the warranty expired in January this year. I haven't had the material updates/changes that it came completely out of nowhere. Then I went home and plugged. There was no power charge light next to the power cord on the side of the laptop, however, I came back 20 minutes later and there was a cool white light. I then it turned on and it was for about 10 minutes before it crashed again. It sits on my desk now on the charge. seeing none on or whatever it is and it won't turn. I tried to put running on the battery, I have tried just on the current and none work, any suggestions would be appreciated

  Hi @Jasotufy2,
  
  I hope you enjoy your visit to the HP's Support Forums. I understand that you have a problem with the computer to turn off. I'll be happy to help you.

  Please see the following documents.

  Using and testing the power adapter AC

  Battery not power Notebook or hold a Charge

  Computer hangs or freezes (Windows, 10, 8)

  Please keep me informed of the progress of things.

  If you need help, let me know and I will gladly make all that I can to help you.

  Please let me know if that solves the problem by marking this post as "accept as a Solution.
  To simply say thank you, click the Thumbs up below!

  Thank you.

• Satellite C50D - A - 13 G - compatible graphics card

  Hello

  I have the Toshiba laptop C50D - A - 13 G with an AMD Radeon HD8400 graphics card. If I understand correctly it is integrated and not replaceable, however it is possible to add another card and do a single defect?

  Thank you.

  Due to specific design material, update on mobile machinery is quite limited. What can be changed or upgraded's RAM or HARD drive.
  Exchange GPU or upgrade is not possible.

  What is the problem with your machine? I assume that you are not so happy with graphics performance, right?

• Satellite A-C55-1N1 - upgrade of the network cards

  I have a Toshiba Satellite C55-A-1N1 running Windows 8.1 and want to update the NETWORK Ethernet card both cards Wi - Fi, with the upgrade of the most important Ethernet card.

  Current card Ethernet installed (by Device Manager) is Qualcomm Atheros AR8172/8176/8178 PCE - E Controller Fast Ethernet (NDIS 6 h 30). I would like to move to GigaBit Ethernet.

  I don't want to disassemble the laptop to determine the size of the current map before obtaining beforehand a replacement (to avoid repeated disassembly). Can someone please help with the details of the existing card (for example what size/connections) and what other cards would be compatible to use to reach GigaBit speeds, if indeed this is possible?

  Map current WiFi installed (by Device Manager) is Qualcomm's Atheros AR956x wireless network adapter. I would like to be able to also connect at 5 GHz...

  As with the Ethernet card, I would get a compatible card before dismantling and would ask the same questions. I also understand that I would need 2 or 3 internal antennas to reach faster speeds of the WiFi. Can someone advise please on existing maps, maps of appropriate replacement and on the issue of the antennas.

  Thanks in advance for any help and advice.

  Due to specific design material update on laptops is very limited and supported. Support is upgrade RAM or HARD disk. It's nothing more than that.
  You can find a list of compatible RAM memory modules to upgrade. HDD or SSD upgrade is not problematic and, on most portable models, it can be done by the owner of the laptop.

  All the other hardware upgrades are not supported. I do not understand that you want to use the material with the best specification but that should help you with this?
  > Can someone please help with the details of the existing card (for example what size/connections) and what other cards would be compatible to use to reach GigaBit speeds, if this is indeed possible?
  These info, you can get the laptop to the manufacturer or an authorized only, partner, but they will tell you the same thing I have already written.

  My advice to you: do not disassemble the laptop on your own. In a first time the valid warranty and secondly, you can damage something.

  At the end one, may be stupid, the question: what is the problem actually? Is your machine so slow or what? I mean in particular the LAN connection. It must be OK.

• external hard drives firmware cant, said to be used

  material update

  I bought a Western Digital external hard drive "My Passport" opportunity and I'm trying to update the firmware. Message says that it is used by another program or something. I have disabled the Microsoft Security software that was another who had to be disabled in order to update the firmware. What else could be used by car and how do I stop it?

  Hello

  ·         What is the full error message that you receive?

  ·         Is there data on the hard drive?

  Method 1:

  I suggest you to put the computer in a clean boot state and check if it helps.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to connect the hard drive to another computer and make a formatting of the hard drive and check if it helps.

  See article:

  http://Windows.Microsoft.com/en-us/Windows7/formatting-disks-and-drives-frequently-asked-questions

• My resolution continues to go too low and it is very difficult to read the screen

  I HAVE PROBLEMS WITH MY RESOLUTION-IT IS TOO LOW AND WILL NOT CHANGE

  I went to the Windows Update Catalog and typed in "video drivers" and he gave me 958 choices on 39 pages and I wonder where is should I choose - or should I just try them one at a time?

  It's usually stupid to accept any peripheral material updated from Microsoft - driver unless you want problems.

  You should always get your device updated the driver from your hardware manufacturer.

  As the forums MS Answers does not prompt for any information system when a new question is asked, we don't know anything about your system.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  If you answer these questions, someone (perhaps a useful MSE or FM) can see what the details of your system and what your video drivers installed and may direct you to a place better if the drivers must be updated.

  Try not to use your caps lock when responding.  Type uppercase is considered screaming and you don't need to be yelling again.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  If the system works, what do you think might have changed since the last time it did not work properly?

  Now talk us a little about your hardware:

  Click Start, run and enter in the box:

  Msinfo32

  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.

  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.

  There will be some personal information (such as the user name and the name of the system), and anything that turns information private for you, simply delete the pasted information.

  This will minimize back Q & A and eliminate guesswork.

• Problem has been detected and windows has been shutdown error STOP: 0x0000008E. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Original title: problem has been detected and windows has been shut down. Get the memory dump after you have installed the trial version of MS Project 2010.__space.

  Computer Message: Check if you have enough disk space. If a driver is identified in the stop message, disable the driver or check with the manufacturer for driver updates. Try changing video cards.

  Check with your suppliers of material, updates the BIOS. Disable the BIOS memory options such as implementing caching or shading. If you need to use Safe Mode to remove or disable components, restart your computer, press F8 to start advance startup options, and then select Safe mode.

  Technical information: * STOP: 0x0000008E (0xC0000005, 0x8054556C, 0xADB78A98, 0x00000000)

  Beginning physical memory dump

  Total physical memory dump. Contact technical support for further assistance group.

  Hi fernandomventura,

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the articles below which deals with a similar question

   

  General troubleshooting for an error message that you receive randomly in Windows XP: "Stop 0x0000008E"-restore the system to achieve ".

  http://support.Microsoft.com/kb/945658/

  You receive a random "0x0000008E" error message on a blue screen in Windows XP

  http://support.Microsoft.com/kb/827663

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Product already in use key

  Your windows product key is already in use. Well well, it is on this computer and must be in use. I upgraded my hardware on this computer, and now I have to activate windows again. I don't need to buy what I already own. Help, please!

  "kmart490" wrote in message News: f7a1819e-2aa9-4aec-bb8f-151a173bde15...

  Your windows product key is already in use. Well well, it is on this computer and must be in use. I upgraded my hardware on this computer, and now I have to activate windows again. I don't need to buy what I already own. Help, please!

  Yep - the key is already in use, from your previous installation.
  What material update you? What Windows license type you have (OEM/retail)?
  Try the Activate by phone.
   
  
  --

  Noel Paton | Nil Carborundum Illegitemi | CrashFixPC | The lazy three fingers

• Incompatibility of BSOD APC Index

  After more than 8 weeks of solid work, I get the BSOD. It happens almost every time I save to my desktop to Word 2007 (2nd or 3rd save the same doc).

  Fault bucket: 0x1_SysCallNum_b3_RapportPG = 14fe, Type 0

  Recent change was the installation of an external USB SATA connection, installation seems to be OK.

  Solution Center suggests material update or deletion. There is no update and the connection is is attached.

  Hello

  If you run BlueScreenView to view codes BCCode or Stop - mode or Windows without failure.

  See the troubleshooting of blue screen above dated Monday, March 29, 2010 19:48.
  
  BCCode: 24 0 x 00000024

  Cause

  One possible cause of this bug check is damaged drive. Corruption in the system of NTFS file or defective (sectors) on the hard disk can cause this error. Corrupted drivers SCSI and IDE may also compromise the ability to read and write to the disk system, so causing the error.

  Another possible cause is the depletion of memory pool non paged. If the nonpaged memory is exhausted, this error can shut down the system. However, during the indexing process, if the amount of memory available nonpaged pool is very small, another driver in nonpaged kernel memory in pool mode may also cause this error.

  Solve the problem

  To debug this problem: Use the command .cxr (display context record) with the 3 parameter and then use the command KB (display Stack Trace).

  To solve a problem of hard drive corruption: Check Event Viewer for error of SCSI and FASTFAT (syslog) messages or Autochk (the application log) that might help determine the device or driver that generated the error. Try disabling any antivirus software or Disk Defragmenter tools that continually monitor the system. You must also run the diagnostics of material provided by the manufacturer of the system. For more information about these procedures, see the manual of your computer. Run Chkdsk /f /r to detect and resolve any file system structural corruption. You must reboot the system before the start of the analysis of disk on a system partition.

  To solve a problem of impoverishment of nonpaged memory: Add new physical memory to the computer (which increases the amount of memory available to the kernel nonpaged pool), or reduce the number of files on the volume Macintosh (SFM) Services.

  BCCode: 24 0 x 00000024<-- read="">
  http://www.faultwire.com/solutions-fatal_error/NTFS-file-system-0x00000024-* 1051.html? order = votes

  Rob - bicycle - Mark Twain said it is good.