Matter of time and timezone VMware Appliance identity (NTP)

Similar Questions

• Replace the SSL certificate in VMware appliance identity

  Hello

  I followed the steps to replace the device of identity, a certificate signed by a CA (latest version 2.2.1.0)

  Everything went well and I have included the private key and the certificate chain complete with the device of the expected identity.

  However when I close all browsers and access the identity unit his shows always the default signed certificate (despite the tab SSL showing otherwise!)

  I rebooted the device and replaced with a new certificate, but this made no difference. Am I missing something?

  See here the response of GrantOrchardVMware vRA: certificate does not appear to extend to the port 5480.

  Essentially of 5480 runs using a different web server certificate is not installed in when you update it. There is a way to update the certificate for the site of 5480 which can be found here vCloud Automation Center Documentation Center

• Time to make VMWare Fusion 4 Lion OSx and Windows XP Pro

  Hey guys,.

  I'm having a problem with the time my virtual machine with Windows XP Pro is. Never tipped time to summer time. I can go back in time and choose Synchronize with internet time and it is always wrong. I can uncheck the sync and just change the time before 1 but less than 30 minutes, the clock turn slowly... very weird, I'm not talking only 1 or 2 minutes, it was more like 9 minutes slow after a half hour.

  Does anyone know how to fix this? Is this because Windows XP was disclosed before the change of daylight 3 weeks earlier in 2007? Does anyone else have this problem? I scoured the internet and cannot find what.

  
  Thank you
  Bill

  You have installed all the updates for Windows XP?  Specifically, this a http://www.microsoft.com/download/en/details.aspx?displaylang=en&id=23731 that deals with this DST change?

• Cannot complete the reinstallation of Vista on Compaq laptop using the Compaq recovery disks. Tried to restore disk oem and new close to identical road. Errors: 0xc00000e9 and 0xc0000189 respectively

  With no unusual occurrence that accompanies it, our laptop was able to start and would not initialize anything beyond a screen B & W style BACK and gave the first error (0xc0000e9) on this screen. After several unsuccessful reboots insert us the Compaq recovery disks and crossed the recovery (only full optional with such discs.) At the end of the transfer of recovery (from DVD on computer), the computer tried to restart and reported the same error message. We have seen anything past the transfer of files and B & W on the oem disk. I think the oem HD is bad. Web-surfing suggested the error was associated with a hardware failure and the DVD drive seems to work very well I bought a new HD almost identical to replace the oem version with. Both are Seagate Momentus 160 GB at 5400 RPM drives.

  I re-inserted the recovery with the new installed hard drive disks and it loaded and seemed basically completely install Windows (computer is restored running several times and showed the Windows desktop with sequential programs etc. facilities.)

  To restart the final success, I received an error message in the sense of "windows could not install: Please restart the installation process" and the 0xc000189 error code. I tried again and the result was identical, including the error message. In the process the emblazoned shortcut labeled sunflower administrator with "locked" below briefly appears before the above error appears above him. Navigation on the Web seems to suggest I've hit some kind of security problem that appears when an oem auto-installer is used. He was never a password of any kind on the laptop of our family, if there is one, it should be of Compaq.

  It's an authentic (not stolen etc) oem new install of Windows (the laptop is only 18 months old) and I CD code on the computer but not the case in the installation me I asked for it. I don't know what you looking for installation.

  I'm very confused and any help would be appreciated. Compaq is saying it's a matter of Windows of course.

  Thank you

  http://www.Compaq.com/CPQ-country/cpq_support.html

  Problem with the recovery process, contact the manufacturer of the computer.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• USRP: Time and phase of synchronization for the location of the source?

  Hello

  I used 2 USRP in reception. They are connected together via a cable Mimo.

  I want to locate the source of the issuer. So I need to synchronize the two receivers.

  I did the constellation to the two USRP:

  1 - with identical cables 2 - with different cables.

  (figure: attached files)

  I have synced my receivers (in time and phase)?

  Please help me

  Best regards

  
  

• Time and calendar on the connection of the unit on CUCM

  Hello

  Today, it's Christmas and Friday, I configured delay on CUCM of identity week and holidays. However, today is Friday and holidays as well. Is there anyone who knows how to give a higher priority to route the call to CUC on CUCM vacation? When the call is transferred to the unit connection, I was faced with the same problem.  How to give a higher priority to route the call to wish holiday? In other words, when the day is the day of the week and holidays. Holiday will all first check that the days of the week on CUCM and CUCM.

  Thank you

  Eric

  don't think that there is adjustment to set the priority on the calendar, but if one defines a period of time with a date points, to this date, this period overrides other periods that are set on a weekly basis.

  consult the SRND for clarity on the behavior at the time of the period

  Behavior of time period

  If you set a period of time with a specific date, at that date, this period overrides other periods that are set on a weekly basis.

  Example of

  Consider the following example:

  • There is a time afterofficehours, which is defined as 00:00 and 08:00 Monday to Friday.
  • There is a time, newyearseve, which corresponds to 14:00 and 17:00 on 31 December.

  In this case, on 31 December, the period of afterofficehours will not because it is overridden by more specific newyearseve period.

  Timetables

  A calendar includes a group of defined periods that associates the administrator. Once the administrator has configured a period of time, the time period appears in Configuration window when the calendar in the list of available time periods. The administrator may choose a period of time and add it to the selected list of time periods.

  Note	After the administrator selects a time for connection with a calendar, the deadline is available for binding with other calendars.

  Once the administrator has configured a calendar, the administrator can use the window of the Configuration Partition to select the time zone of the original unit or any specific time zone to a defined schedule. The time zone selected gets checked against the calendar when the user places the call.

  The Time-of-Day function filter the CallingSearchSpace string in time settings defined for each partition in the CallingSearchSpace.

  After the time of routing is configured, if the time of an incoming call is within one of the time periods in the calendar, the partition is included in the list of partition filtered for the call.

  Examples

  You can set the USAholidays calendar as the Group of the following time periods: newyearsday, presidentsday, memorialday, independenceday, laborday, thanksgivingday, christmasday. The administrator must first configure the applicable time limits.

  You can set the time schedule library_open_hours as the Group of the following time periods: Mon_to_Fri_hours, Sat_hours, Sun_hours. The administrator must first configure the applicable time limits.

  http://www.Cisco.com/c/en/us/TD/docs/voice_ip_comm/CUCM/Admin/9_0_1/CCMS...

  VINET.

  -The rate of useful messages.

• YouTube videos problem; whenever I run any video on youtube. It always freeze for a short time and you run. I have to fast forward or rewind the video to run smoothly

  I use windows 7 and inter explorer9. whenever I run any video on youtube. It always freeze for a short time and you run. I have to fast forward or rewind the video to run without problem. could someone help me in this matter. all my programs are up to date.

  Earlier this week Adobe had a version update available / grew Reader,.

  Troubleshooting video, scroll sections Java and Silverlight and use your links version control, uncheck the installation of Java Ask Toolbar addon.

  http://support.Microsoft.com/kb/2532294

  Trouble Shooting games, Shockwave player related.

  http://support.Microsoft.com/kb/2528246

  Uninstall flash if necessary,

  http://kb2.Adobe.com/CPS/141/tn_14157.html

  Download the Flash and Shockwave players and player while your there with ads at the top right of this links page, uncheck the installation of Adobe Chrome addon.

  http://www.Adobe.com/downloads/

• Is there a correct way to stop and restart VMware HA & FT?

  I do something wrong here. What is the right way to stop?

  My VMware defined configuration:

  4 x server R710 (hosts)

  4 x 6248 switches

  1 x MD3000i SAN

  1 x 2950 vCenter

  =============

  4 x guest operating system

  =============

  ESX 4.0.0 U3

  Here are the steps I have to set everything stop.

  1. Stop all the guest operating system
     
  2. Disable the FT of virtual machines
     
  3. Set the Mode of maintenance on all hosts
     
  4. Right-click on each host (R710) and click on stop
     
  5. Stop the vCenter
     
  6. Wait 5 minutes, then turn off the SAN (MD3000i)
     
  7. Power Off the four switches
     

  To restart the game from VMware, I did the following:

  1. Powered on the four switches (wait 2 minutes to go to the next step)
     
  2. Powered on the SAN (wait 5 minutes go to the next step)
     
  3. Powered on the vCenter
     
  4. Open the Dell disk storage manager to see if the SAN is on an Optimal State
     
  5. Powered on the hosts (R710)
     
  6. Go to vCenter
     
  7. the four hosts have yellow dots. Something HA agent is disabled.
     
  8. The I had to disable the check box HA and then re-checked in order to allow the system to reconfigure the AP to the four hosts status normal and ready to be used.
     
  9. Turn on all the feet on each virtual machine
     
  10. Powered on the guest operating system
      

  The second question here is the time of the host, I went to the time setting and the time and Date will not. It was 4 hours off. The time is set to synchronize with my DNS server. Whence this difference of 4 hours guests?

  In summary

  To solve these two problems, you must do the following

  1. see your VC is already a DNS server, set the ESXi hosts to use the Victoria Cross as their main DNS and the virtual as secondary.

  2 configure your VC as an NTP server and point the guests to use.

  If you want to change the host file, you have to set the IP address, host name, domain FULL name

  Example:

  10.10.10.10 Esxihost01 Esxihost01.domain.com

  But rather to use DNS

  Don't forget to assign points

• Using AS2 to get the time and change according to result

  I need to make any changes to a flash projector which was built recently that changes of what is played according to the time of day. It is used to announce the breakfast or lunch/dinner for a restaurant. Previously we had put in place so that the time change happened at 5 in the morning and 10 o'clock in the morning. The code is below. The restaurant wants to change the time switch to be now at the half. I know how to extract the hours and minutes to do.

  This is the code that I've been using

  var currentHours:Date = new Date();
  var currentMin:Date = new Date();
  
  
  timeInHours = currentHours.getHours ();
  timeInMin = currentMin.getMinutes ();
  
  
  var today: Date = new Date();
  shownow = now.setMilliseconds;
  
  
  
  
  If (timeInHours > 4 & & timeInHours < 11) {}
  breakfast_mc._visible = true;
  breakfast_mc.play ();
  dinner_mc._visible = false;
  dinner_mc.stop() ;
  / / trace (timeInHours);
  } else {}
  breakfast_mc._visible = false;
  breakfast_mc.stop ();
  dinner_mc._visible = true;
  dinner_mc.play() ;
  / / trace (timeInHours);
  }
  trace (timeInHours);
  trace (timeInMin);
  Stop();
  Clips of film of breakfast and dinner have this code in them, as well as at the end of each cycle, it checks the time and switches.
  I found this code on Flash Kit, and wanted to try to change it, my hope, was so that he could generate a delay of 24 hours 1604 or 1029 I could then do a comparison <>/ with, but this function adds the numbers then 16:15 = 31 and 12:19 = 31 also. Does anyone have any suggestions on how I can do this
  ? I need time to change at 05:00 and 10:30.  There is a possibility that they will want to extend out to include the day of the week as well. Now I just need the fractional hours for works well.
  function checkTime()

  {

  dat var = new Date() ;

  var h = dat.getHours (); / / 24-hour format is already...

  mn var = dat.getMinutes ();

  / turn to the last limit of 15 minutes /

  //mn = Math.floor (minutes/15) * 15;

  
  

  / / OPTIONAL - add zeros to the hour and minute

  if (hr < 10)

  hr = "0" + hr;

  if (mn < 10)

  mn = "0" + mn; / / remove these last 4 lines if the zeros not significant not due not
  
  
  retour hr + mn ;
  }
  
  
  usage example:
  time = checkTime();
  trace (time);
  Any suggestions are welcome. Thanks in advance!

  If you want to do something when the user time is between 05:00 and 10:30, use:

  var d: Date = new Date();

  If ((d.getHours () > = 5 & d.getHours ()))<10) ||(d.gethours()=""><>

  No matter what

  }

• Show only the time and a red relief

  My watch does not show the clock face. If I press the bottom button, it will display the time and a symbol of red light.

  Hello

  Your watch has a low battery charge level and entered into mode of power reserve.

  This mode displays only the time when you press the side button, in order to keep this service as long as possible.

  You will need to exit this mode, press and hold the side button. However, you need to charge your watch first. Allow up to 2.5 hours for a full charge.

  More information:

  With the help of power reserve - Apple Support

• Why then download a clip is not clear, some of the writing, it is not clear how can a solution this? Thank you very much for your time and your help on this issue.

  Video playback that I just downloaded in my VLC it don't watch not clear enough to read Instructions, how can I make it clear to be able to read the Instructions? I thank very you much for your time and your help.

  It could be that the music is bad. It could be your software.

  Download the latest VLC Player.
  Post a public link to the clip.

  • see if there are updates for your graphics card disk drivers

  https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

  • Disable protected mode in the plugin Flash (Flash 11.3 + on Windows Vista and later versions)

  https://forums.Adobe.com/message/4468493#TemporaryWorkaround

  • turn off hardware acceleration in the Flash plugin

  https://forums.Adobe.com/thread/891337
  See also:

  • http://KB.mozillazine.org/Flash#troubleshooting

• How to transfer pictures from iphone to PC and keep the date, time and place

  How to transfer pictures from iphone to PC and keep the date, time and place

  Hello Grumpelfuerer,

  Thank you for using communities of Apple Support.

  If I understand your message that you want to import your photos from your iPhone 6 s, as well as for your Windows PC. I would like to save my photos on my computer as well. There are two ways to do this. You can use the iCloud photo library allowing to synchronize photos between your devices or import your photos to your PC using Windows Photo Gallery. This article will provide you with the steps that you can use for both options:

  Import photos and videos from your iPhone, iPad or iPod touch

  Best regards

• Where's my calendar? Restarted 4 times and no calendar!

  Lightning Calendar updated yesterday and now it's gone. OS Win 7. Thunderbird restarted 4 times and still no timetable. That is what it is?

  Thanks much christ1. Installation in safe mode worked. I was lost without my calendar. I hope that this will not happen again.

• Have not used my email in a long time and I forgot the user name and password

  Hello. I don't use my thunderbird email in a long time and can't remember my user name or password if I remember my email address. How can I connect?

  Your user name is all or part of your e-mail address.
  The user name and the password is given with your email provider. You need to communicate with them.
  Most providers have a password reset link on their page for help by e-mail.

• My iphone 6 does not light, I held the home button and power at the same time and no vibration or no sign of life, any suggestions as to what it could be would be appreciated

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Marley6921 wrote:

  Phone bought 3 days ago and I fight to turn it on, it's just a black screen, the phone records into iTunes but does not turn, I tried holding down the home button and power at the same time and still nothing, I presume that it's a battery problem as if it was the backlight then the phone vibrated when you press the power button help Please!

  Put it on wait ten minutes if the phone did not come one, then hold down the sleep/Home button until you see the apple logo and then release, make sure that the phone is still connected to the charger.