Maximum memory for Portege Z930 - 14L

Hello

I have a Portege Z930 - 14L with 8 GB memory and wonder what is the maximum memory I can add? I saw the following in the description, but I don't understand if this means that the maximum is 12 GB (4 GB onboard + 8 GB expansion) or 16 GB (2x8GB)

Standard system memory: 8 192 (4 069 + 4 069 onboard) MB
maximum extension: 8 192 MB
technology: DDR3 RAM (1,600 MHz)

Thank you
Markus

If I understand this right info your a Portege already maximum RAM.
Is that your laptop Portege can manage with 8 GB memory max. On board, there are already 4 GB and there is only one slot of RAM available for upgrade that also contains a 4 GB RAM module.
In other words, your laptop is already maximum RAM and upgrade is not possible.

Tags: Toshiba

Similar Questions

  • Impossible to download the BIOS for Portege Z930 - 404 error

    Hello

    My tool tempro says that there is a new BIOS for my Portege Z930.
    But the link does nothing.

    If anyone can solve this? Or have the correct link

    Thank you
    Markus

    You can use this direct link to download the BIOS file
    [Update BIOS 6.80 - WIN for Portege Z930 | http://support.toshiba-tro.de/tedd-files2/0/bios-20140212101921.zip]

  • Portege Z930 - 14L - DC orange led blinks 8 times and green ECO light led

    Portege Z930 - 14L. I can't boot from the last power since.
    The domain controller in the orange Led blinks 8 times and eco green light led is lit.

    DC IN flashing ornage indicator indicates a problem with the power supply. Initially, you should try plug the adapter HAVE an another power outlet. If she does still not work, you should contact Toshiba ASP (authorized service provider)

    Electronic supply on the motherboard is probably the problem.

  • Portege Z930 - 14L + Dynadock U3 crashes after a few minutes of use

    Dynadock freeze, after a few minutes using or when I play the movie on youtube in a few seconds.
    Laptop works fine now, but the display through dynadock solidifies (freezes and the picture will become.) Its stil game.

    Toshiba Portege Z930 - 14L, Toshiba Dynadock U3
    Both aged two weeks. Coercive power disconnect on dynadock and display of the restoration.

    I have test the driver cd, driver of site Web of Toshiba and last pilot displaylink official sites.

    Hello

    What USB port to connect the Dynadock U3 device did you use?
    Have you tested the Dynadock U3 as part of different USB ports?

    AFAIK the Z930 Portege - 14L supports a USB 3.0 port on the right side and two USB 2.0 ports on the back.

  • Warranty extended for Portege Z930-8113

    Is extended warranty (part number: EXT103I-V) available for Portege Z930-8113?

    In my opinion you should take warranty on Toshiba official page as news http://www.toshiba.eu/services/warranty-extension/
    Otherwise contact the nearest authorized Toshiba service provider in your country. They can help you and provide accurate information.

  • What is the maximum memory for this computer what kind

    I want to restore my system like new or factory but I have no disk what the best thing to do and what is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

    What is the maximum memory for this computer, what type and how much slot I only see 2 slots without any, but the system say that this computer has 512 MB of ram. This model says Dell Dimension8100. Thank you.

    Maximum RAM 2 GB

    http://support.Dell.com/support/eDOCS/systems/dsleest/specs.htm#memory

    Note: the manufacturer was required to provide a way to reinstall Windows. If it is not a set of disks with the computer, there will be a hidden restore partition (do not be confused with the system restore), you would use to return the computer to the State of the OOBE (Out of Box Experience).

    Usually, just by pressing F11 continuously during the computer startup to display a boot menu offering the option you need.

    You may need to contact the manufacturer of your hardware (Dell) to see what options they have to repair Windows.

    UTC/GMT is 20:35 on Saturday, May 26, 2012

  • Adding additional partition D for Portege Z930 with that 256SSD

    I just got a new portege Z930 i7 with 256 ssd and Win7 pro 64. It starts with 4 partitions already installed.1.46Gb recovery, 217 GB C, 8 GB hibernation and a 11.9 primary with the only option to remove.

    I can shrink the C drive to 110 GB offering 110 GB unallocated. But if I try to format the unallocated space it tells me that this will change to dynamic disks and there is not enough space.
    I have a D drive for the data. How to do this?

    Hello

    I recommend to use the 3rd party software called * Gparted.*
    It of based on the system Linux and you could create bootable USB flash memory stick containing Gparted tool.

    It is great for partition management.

  • Upgrade of RAM for Portege Z930 recommended

    Hi all
    I would like to know what is recommended by Toshiba memory to upgrade the RAM to the maximum amount.
    I am owner of a Portege Z930 16 M part number PT234E-08P05SIT.

    If I undestood weel, it takes 4 GB of DDR3 memory to get the maximum of 6 GB (2 to edge + 4), right?

    What manufacturer recommends Toshiba?

    Thank you
    Enrico

    Compatible 4 GB of RAM has PA5037U-1M4G part number.
    Check it out.

  • Motherboard for Portege Z930 B113 must send to the Brazil

    Hey, * I live in the Brazil and bought a laptop Portege Z930-B113 in Dubai on a trip.
    The same evil work and burned its motherboard, and now his need for a new.

    As here in the Brazil is not supported and toshiba do not sell parts for this ultrabook,
    Could someone send me an email or a store to buy this motherboard, with an international expedition to the site?

    If you need to request more information.

    Thank you.

    Portege Z930-B113 belongs to the PT234V series.
    I guess that this series was not available in North or South America.

    But the PT234U of Z935-P390 similar to Toshiba Portege is out on the American market.
    It should support the same motherboard, so I guess you could get the motherboard for Portege Z935-P390 to the Brazil that should be compatible with your Z930 B113 Portégé

  • Upgrade memory for Portege M400

    I recently tried to upgrade my laptop Portege M400 the original 512 MB of ram to 2 GB (which seems to be possible according to the user manual.

    I tried to install the memory standard DDR2-533 (I install 2 x 1 GB). However, when I tried to reboot the computer with the new memory of the hard drive does not recognize the new memory and I had to involve someone with more expertise than me IT. After that I tried to replace the original memory in the computer the hard drive also failed to recognize that and laptop computer were to restore to factory settings before windows would load again.

    Can anyone tell me what type of memory should I install? Y at - it Toshiba specific memory that must be installed in the system? And finally, can I just pick this of any toshiba dealer?

    Thank you

    Hello

    Without much written, I can post modules compatible memory for your laptop model:
    PA3499U - 1 M 25 (Kit of memory 256 Mo DDR2-667)
    PA3511U - 1 M 51 (Kit of memory 512 MB DDR2-667)
    PA3512U-1M1G(DDR2-667 1GB Memory Kit)
    PA3513U-1M2G(DDR2-667 2GB Memory Kit)
    DDR2-533 256 MB (PA3389U - 2M 25)
    512 MB DDR2-533 PA3412U - 2 M (51)
    1 GB OF DDR2-533 (PA3411U-2M1G)

    Your laptop can handle with 4 GB RAM max. If you want to order memory simply use PAxxx part number.

    Bye and good luck!

  • Maximum memory for Optiplex 380

    Specifications for maximum memory in the Optiplex 380 are quite confusing. Pdf manual indicates the maximum memory is 4 GB - 4 GB module in a slot or two 2 GB modules in two locations. But I read in other places that the maximum is 8 GB - two 4 GB modules in both slots.

    On another thread here, someone asked max on the Minitour Optiplex 380 memory and told me that the max memory is 8 mg. But see here that the max is given as 4 GB:
    http://www.pcrush.com/product/desktop-computers/632935/Dell-OptiPlex-380-desktop-computer-Intel-Core-2-Duo-E7500-dual-core-2.93-GHz-Mini-Tower

    I also is not the case of the minitour and don't know if that makes a difference. I believe that what I have is called the small form factor. I'd really, really like to upgrade memory, but don't want to spend money on a memory module, I can not use.

    Edit: Here are the other features of my computer:
    3.20 gigahertz Intel Pentium Dual-Core
    cache of 64 kilobytes main memory
    secondary memory 2048 k-cached
    64-bit ready
    Multi-core (2 total)
    Board: Dell Inc. 01TKCC A01
    The bus clock: 800 MHz
    BIOS: Dell Inc. A06 01/09/2011
    Usable 3996 megabytes of memory installed
    Slot 'DIMM_1' has 4096 MB (serial number 652F0829)
    'DIMM_2' location is empty

    Just checked. You can add another 4 GB module to your system.

    You can order one here.

  • Maximum memory for Z400

    I bought a Z400 as he was listed as pc supported of Avid recording with Protools

    It has 8 GB, but is now seeing 8GB is a minimum for pro tools requiremenet, and I want to go up to at least 16gbs

    What I was asking is, what is the maximum amount of RAM I can update? If the Z400 has six slots, and I put 4GB in each slot, which should mean that I have a total 24GBs as my maximum right?

    Any help on this would be greatly appricated

    Simply reading, "Architecture of the Council system" section on page 3 of the "HP Z400 Maintenance and service guide", I see that a DIMM 6 motherboard has 3 channels/CPU, 6DIMMs/CPU and able to install DDR3 800/1066/1333 UDIMM only.

    At the time of printing this means 6 DIMM motherboard could contain 24 GB through 4 GB DIMMs.

    It lists also in the section "Memory" on page 116 of the same document, a hyperlink to http://www.hp.com/go/quickspecs to find the compatible with desktop DIMMs (I have not looked at this link)...

    If no update of the BIOS later increased the DIMM size that could be installed in your system, I don't know... But you could read every note BIOS release for info that can show if the DIMM size has been increased...

  • Maximum memory for laptop HP dV 7 1243 above

    Costco tells me that I have 4 GB of ram. What is the maximum amount of ram I can install and which tokens should buy? I am running Windows 7 Home premium 64-bit.

    Hello

    Go through this card, I guess that's the model of laptop you have: http://support.hp.com/us-en/document/c01634435

    Max: 8 GB

    List of component HP part store: http://partsurfer.hp.com/Search.aspx?SearchText=NB234UA

    Config of RAM listed in your laptop is: 800 MHz 200 pin SODIMM SDRAM, PC2-6400

    There are 2 slots in the memory of Bay, you could add another 4GB with the above configuration

    I couldn't find repair,

    Download, run this app - http://www.cpuid.com/softwares/cpu-z.html .

    You can find the config of RAM already present in your system & confirm it, buy an identical, same brand is ideal.

    It's one that we are looking for:

    http://UK.crucial.com/GBR/en/ct51264ac800

    Kind regards

  • Upgrade SSD for Portege Z930

    Hello

    Any who tried to Z930 SSD update?
    You are looking for information, they seem to use interface mSATA - mini PCI-E as conectors.

    No specific information on the drive inside?

    I intend to bring this beauty on the machine:
    http://www.NotebookReview.com/default.asp?NewsID=6509

    Thank you

    The mSATA connector resembles the miniPCI connector, but they are totally different.
    So, your only solution is to replace the HARD drive with a 2.5 "SATA SSD.

  • Are adapters CA / CC for Portege Z930 and Kira-701 compatible?

    Hello friends,

    My boss has a Toshiba Z-930 ultra-livre and power adapters about 10 - 12 for him around the world in his various homes and offices.

    He now plans on changing his computer. The same power adapters will work on the laptop Toshiba KIRA-701 or not? I tried to look to the top of the internet, but could not find any confirmation.

    If the 701 Kira is not compatible with the old charger so must be changed every 10-12 power adapters.

    Can someone help me with this information? The power adapters are not compatible so I might as well consider other brands, so I would have to change anyway all the power adapters.

    Thank you in advance.

    Umair

    Sorry, but I must ask you this question: do you want to buy new notebook without adaptors CA / CC and the use of old adapters CA / CC with the new machines?
    Sorry, but it makes no sense to me.
    Even if you want to exchange machine you, what you want to do with Z930 machines without adaptors CA / CC? It does not seem logical to me.

    In any case, I found the info that both models have adapters sector with the same output voltage: output current V. 19: 2.37 A so I think that both machines use the same adapter.

    I hope someone who own that Kira 701 can confirm this.

Maybe you are looking for