Maximum number of columns.

Similar Questions

• Maximum number of columns in model RTF Pivot

  HI -.

  For the model previously mentioned here matrix report problem with template RTF - text columns

  I want to restrict the maximum number of columns per page, and the table should be repeated for the rest of the columns in another page.

  For example, if there are 5 columns must be returned, I want the first 3 columns in the first page and the 2 others in a second page (with the hole repeating frame).

  It's for keeping data legible printing of the pdf format, otherwise the data seems damaged and unreadable.

  Y at - it ideas to achieve this requirement?

  Best regards

  Rupture of the horizontal column works fine in the attached version of the RTF model.

• Maximum number of columns in the generic report

  What is the maximum number of columns in the generic report? I put it to 100, but the data that was displayed are always 60.
  
  Thank you.

  Hello

  It is 100.

  Oops, I thought it was, it seems, this maximum has been removed now - see here
  Maximum number of columns in the generic report

  See you soon

  Ben
  http://www.munkyben.WordPress.com
  Don't forget to mark the answers useful or correct ;)

  Published by: Munky on August 28, 2009 11:16

  Published by: Munky on August 28, 2009 11:17

• IR - CubeQuery - no limit to the maximum number of columns or lines?

  In IR query processing cube, is there a limit to the maximum number of columns or lines? If so, how?
  
  When downloading of the results, are there limits to the maximum. lol the columns or lines as well?
  
  All documentation on its limits?
  
  Please help someone?

  Columns cannot be more than 256 upto Hyperion Interactive Reporting Studio 9.2.

  No, there is no limit to the maximum number of rows. It depends on the memory and available space on your machine.

  Please correct me if I'm wrong.

  I hope this helps.

  Kind regards

  Manmohan Sharma

• Function of loading data - maximum number of columns?

  Hello
  
  I was able to create a page with load data wizard. I used this wizard page before with no problems, but in this case specific I want to load a spreadsheet with a lot of columns (99 to be precise). When I run the page, download the spreadsheet in the appropriate table, but only the first 45 columns. The other 56 columns have null for all rows. In addition, there are 100 rows in the spreadsheet and it does not load them all (it charges 39).
  
  Is there a limit to how many columns it can handle?
  
  
  Also, when I re - download the same file, the results of loading data show that he inserted 0 rows, update of 100 lines, failed 0 zeros. However, there are still only a total of 39 rows in the table.
  
  
  Thoughts?
  
  Steve

  Steve wrote:
  FYI, I understood why he was not load all 100 lines. Basically, I need to put two dependent columns in the definition of charge instead of one; It was see several rows in the spreadsheet and supposed that some were even record based on a single column. If this part is resolved...

  I still would like comments on the number of columns of load data wizard can handle, and if there is a way to manage more than 45.

  The load data wizard can handle a maximum of 46 columns: + {message identifier: = 10107069} +.

• Registry XSD - ORA-01792: maximum number of columns in a table or view is 1000

  Hi all

  I am trying to record 3 patterns HTNG_ChargePostingRS.xsd, HTNG_ServiceIssueCreateRQ.xsd, HTNG_ServiceIssueNotifRQ.xsd. When I do, I get the above error. I tried again but this time I put the genTables = > FALSE. I was able to record everything except ChargePosting because it gave the same error.

  My questions are:

  1. What are the tables? The only thing I will use these patterns for is to validate incoming requests and post my answer.

  2. why if I do not generate the table always make the mistake?

  1. What are the tables?

  They are needed when you want to use the object-relational storage.

  Schema with genTypes and genTables set to 'true' record a set of types of objects and collections as well as tables of objects based on these types to store XML in a relational way.

  Read more in the documentation: http://docs.oracle.com/database/121/ADXDB/partpgschema.htm#BGBFAADE

  2. why if I do not generate the table always make the mistake?

  Dunno, maybe because you're still trying to generate the types of objects?

  But if you just need to record patterns of simple validation, then you have no need of types of objects or tables.

  Try again with genTypes-online fake and genTables-online set to false.

  If it still does not, thanks for posting the referenced schemas so that I can reproduce the problem.

  http://www.OpenTravel.org/OTA/2003/05' schemaLocation ="... /OpenTravel/OTA_CommonTypes.xsd"/ >

  http://www.OpenTravel.org/OTA/2003/05' schemaLocation ="... /OpenTravel/OTA_LoyaltyCommonTypes.xsd"/ >

• editing a table to add the number of columns fails with ORA-01792

  I'm editing a table to add columns, and ORA-01792 receiver: maximum number of columns in a table or view is 1000. The table of the altar will be no more than 1000 columns. The environment is RHE5 Oracle 11.2. ALTER statement adds a lot of columns in the table, but when I do a manual change to add a dummy column it works, after that, if I run the original the change works!

  What is a table compressed with unused columns?

  This may explain the error with the limit of 1000.

• MAX number of columns in Oracle

  What is the maximum number of columns allowed in an Oracle table?

  1000

• maximum number of characters used in a column

  Hi all
  Suppose I have a table named employee with two fileds (Emp_id and name)
  I need the query to find the maximum number of characters used in the column name until now.
  
  CNA anyone help me.

  combine the MAX and LENGTH

  as in:

  SQL> select max (length (ename))
    2    from emp
    3  ;
  
  MAX(LENGTH(ENAME))
  ------------------
                   6
  
  SQL> 
  

• How can I find the maximum number of recorded sessions ever?

  Hello

  I see the sessions_highwater column in the license of $ v is the maximum number of sessions since the database startup time, but I wonder if there is a view that shows the maximum number of sessions ever recorded? (that is, before the last restart of the database)

  Thank you!

  Jon

  Query dba_high_water_mark_statistics

• Number of columns in a logical and line refers

  I need help for oracle SQL,
  
  
  (Unique) student has five races in a table
  
  I need a select statement with student_id - 1 column
  
  
  I need to count the number of columns with values 'Yes' in them
  
  the columns are race5 for a single line, race3, race1 race2, race4 - this should be ndcolumn 2
  
  
  The 3rd column must contain the maximum of the race with 'Yes' in the
  
  That is to say if race1 and race 3 'yes' in them are values I need 3 in the column next, - 3rd column
  
  Can someone help me with this

  Hello

  As stated by John, the datamodel is wrong and keep it as a separate table (student_id, race_id) will be ideal. But, if you want to continue to use your existing data model, you can use something like

  WITH students AS (SELECT 1 student_id,
                           'Yes' race1,
                           'No' race2,
                           'Yes' race3,
                           'No' race4,
                           'Yes' race5
                      FROM DUAL
                    UNION ALL
                    SELECT 2 student_id,
                           'Yes' race1,
                           'No' race2,
                           'Yes' race3,
                           'Yes' race4,
                           'No' race5
                      FROM DUAL)
  SELECT student_id,
         DECODE (race1, 'Yes', 1, 0)
      + DECODE (race2, 'Yes', 1, 0)
      + DECODE (race3, 'Yes', 1, 0)
      + DECODE (race4, 'Yes', 1, 0)
      + DECODE (race5, 'Yes', 1, 0) count_race,
         CASE
           WHEN race5 = 'Yes' THEN 5
           WHEN race4 = 'Yes' THEN 4
           WHEN race3 = 'Yes' THEN 3
           WHEN race2 = 'Yes' THEN 2
           WHEN race1 = 'Yes' THEN 1
           ELSE 0
         END max_race
    FROM students
  

  Thank you
  sukhijank

• Maximum number of errors to input registers, tried different settings to XML

  Hello
  
  I have a DYNAMIC pivot table where I am getting * "exceeded configured the maximum number of records of entry allowed.."
  
  My report is 20 columns * about 6000 lines so 120,0000. I tried to get both the parameters in bold below to 500,000 does not. I get the same error in the display of the table where the settings is always set to 64 000 lines.
  
  < Center >
  < MaxVisibleColumns > 5000 < / MaxVisibleColumns >
  < MaxVisiblePages > 2500 < / MaxVisiblePages >
  * < MaxVisibleRows > 500000 < / MaxVisibleRows > *.
  < MaxVisibleSections > 5000 < / MaxVisibleSections >
  * < DefaultRowsDisplayed > 500000 < / DefaultRowsDisplayed > *.
  < > 5000000 MaxCells < / MaxCells >
  < defaultRowsDisplayedInDownload > 15000 < / DefaultRowsDisplayedInDownload >
  < / Center >

  Here is my set of the section "views":

  
  
  
  75
  
  500000
  
  fake
  1920000
  5000
  2500
  500000
  5000
  
  

  
  
  75
  
  500000
  1920000
  2500
  500000
  5000
  
  
  140000
  
  
  1000000
  5000000
  
  

• ORA-00018. Exceed the maximum number of sessions

  Hi all
  
  I have a windows Server 2003, oracle 10g release 2.
  connection of 300 users competitor.
  
  My SESSIONS parameter = 800
  My PROCESS parameter = 723.
  
  After 2 or 3 days, I got the following message when I try to connect.
  
  ORA-00018. Maximum number of sessions to exceed.
  
  even I have restart my server, I got this number sometimes.
  
  What is the problem? I'm really in a very bad situation, users can not connected.
  
  Thank you

  Please post output commands below:

  Select the value of the parameter $ v where name = "sessions";
  Select count (*) in the session of v$.
  Select * from v$ resource_limit;

  If you see the 3rd command output as equal values in all the columns then its correct and Oracle returned ORA-00018.

  Then, V$ SESSION is fake! It does not report all sessions really in use. If you look in V$ SESSION see text (with the help of V$ FIXED_VIEW_DEFINITION), you will see that V$ SESSION reports of the sessions USER and only BACKGROUND.

  But there is a 3rd type of session - a RECURSIVE session, which is used for recursive calls data dictionary as explained above. V$ SESSION does not display these.

  So what is the moral of this story?

  Oracle uses recursive sessions for recursive data dictionary operations
  These sessions are also taken from the array of objects in session state controlled by the session setting
  V$ SESSION shows no recursive sessions, but V$ RESOURCE_LIMIT told it the truth about the use of the session state object table
  If you hit the error ORA-00018, and then expand your table of parameters of sessions or configure your application to use fewer connections or sessions

  Note that Oracle 11.2 changed the automatic calculation of parameters of sessions and large number of session state objects is attributed to a number of default process.

  Source: http://tech.e2sn.com/oracle/oracle-internals-and-architecture/recursive-sessions-and-ora-00018-maximum-number-of-sessions-exceeded

  Concerning
  Girish Sharma

• OBIEE 11 g: error - exceeded configured the maximum number of authorized release

  Hi guys,.
  
  We are implementing the OOTB repository, after some reports of loading data show the following error msg. Can someone tell me where to change the limits?
  
  «Error loading of list "«display error»»»
  «"Exceeded the configured maximum number of allowed output prompts, sections, the lines or columns»» It must be because of the restriction on the number of records in a report"
  
  Thanks in advance

  Hello user,.

  Even I faced the same error and solved in the way below: -.

  Error: Exceeded the configured maximum number of guests allowed output, the sections, the lines of OBIEE 11 g.

  So to solve this problem, add the below tags mentioned in the instanceconfig.xml file that is located under

  \Middleware\instances\instance1\config\OracleBIPresentationServicesComponent\coreapplication_obips1

  http://bidevata.WordPress.com/2012/04/27/exceeded-configured-maximum-number-of-allowed-output-prompts-in-OBIEE-11g/

  Mark useful/correct.

  Thank you
  OBIEELearner.

• Maximum number of outdated lines

  Hello
  
  I'm using Smart View (Hyperion 11.1.2.1) where large data must be retrieved. But during the extraction, I get the error message "error Essbase (1020011): maximum number of lines [5000] exceeded." I modified the file essbase.properties as below.
  
  ################################################################################
  # Properties file used by ANALYTIC PROVIDER SERVICES
  # The version 11.1.2.1.00 - Talleyrand SP1
  ################################################################################
  
  # Use / for separator.
  
  # Data used in embedded mode JAPI directory
  # Specifies the location of the folder that contains the file domain.db
  # If the FMV - DESS_ES_HOME option points to a HPS installation directory and domain.db
  # beneath ESS_ES_HOME/data, this entry is not necessarily present.
  # else, specify the location of doamin.db here.
  # system.dataDir =
  
  # Specifies values for the Essbase Server network connection
  # APS will try netConnectRetry times to connect to an Essbase server.
  olap.server.netRetryCount = 1200
  olap.server.netConnectRetry = 3
  olap.server.netDelay = 1200
  olap.server.netSocketTimeOut = 1200
  # Specifies the maximum rows/columns for dataquery grid. a value of 0 indicates no limit.
  service.olap.dataQuery.grid.maxRows = 10000
  service.olap.dataQuery.grid.maxColumns = 255
  
  # Record Configuration - logging.xml moved
  
  # Maximum downtime for HPS sessions (in minutes)
  System.session.Timeout = 60
  
  # system.faultTolerance
  # retryTime - Maximum number of times to retry
  system.faultTolerance.retryTime = 10
  
  # monitorInterval - interval schedule thread to monitor the cluster components.
  term # in seconds
  system.cluster.monitorInterval = 30
  
  ################################################################################
  # BEGIN: Specific properties of Smartview
  ################################################################################
  SmartView.System.checkforspecialchars = true
  smartview.webservice.autoadd.EssbaseLocalhost.server = true
  SmartView.WebService.autoDeploy.force = false
  SmartView.WebService.autoDeploy.Warn = false
  SmartView.WebService.gzip.compression.Disable = false
  ################################################################################
  # At the END: specific properties of Smartview
  ################################################################################
  
  After doing this, I restarted the service - "Hyperion - Web Application Services Provider". I still get the same error in Smart View.
  
  Please let know us if I missed something.
  
  Thank you.
  
  Edited by: user13325223 January 6, 2012 12:39

  Have what place you updated of essbase.properties, as it exists in a number of places

  See you soon

  John
  http://John-Goodwin.blogspot.com/