MAXL Script to retrieve a specific user groups

Similar Questions

• Hide the headings for specific users/groups

  Hello
  
  Is this possible with WEBhelp, hide/Exclude subjects for specific user groups / users?
  
  Currently, we use html/chm help. There is a project for our main software. I have another project for an add-on that is integrated in the table of contents of the main project using the merged help function. We only install help for this module when the customer has purchased this module. So the customers who do not have this module do not have help to make it.
  
  It is possible something similar with WEBhelp (Pro)? I ask because we go to WEBhelp (Pro). In this case, there is no help by the customer file, but one for all the world. Is there a way to display only the additional items to customers who use this module?
  
  * The only way I can think is to integrate all this into a single project and publish twice (one with and one without the themes of the additional module) using the tags of the construction. Or is there a way to let the RoboEngine/RoboServer merger it on the fly, but based on the criterion that the customer has the module?
  * This additional help project can be added to the main help as a teaser for other customers also use this module (others cannot buy unless you are a franchisor of a group of specific hotel for which we have developed the module)
  
  Thank you

  Hi John-Pierre. RoboServer this is impossible on the fly. Tags of the generation are the way to go. Simply create a new tag, apply it on the subjects you want no franchises user to see, then apply the tag to your SSL to exclude it from the output. Viola, you have your username not franchisees to help. Simply remove this label from construction of the SSL for users of franchises so that they get everything. You can also create two identical WehHelp Pro SSL - 1 vote against and no label construction and the other with a construction tag to avoid you to have to remember to add/remove.

  How your application will know files that help write? Is this a separate executable? I know that it is possible for the INSTALLATION. EXE to check the license before installing the modules, but I never went to the bottom of this line.

  BTW, build tags can be used on all types of output.

• Script to add a domain user to the local Administrators group raises the error "the network path is not found."

  I have a Windows Server 2008 R2 domain and a Windows XP Pro workstation that has been attached to the domain and then disconnected. I am trying to create a VBS script to add a domain user to the local Administrators group.

  I log on my computer as a local administrator and run the following script:

  Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
  StrPC Dim: strPC = oNetwork.ComputerName
  Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
  Dim OUser: Set oUser = GetObject ("WinNT://domainname/username")
  oGroup.Add (oUser.ADsPath)

  This script returns the error "the network path is not found."

  However, I am able to go into control panel > user accounts > enter the user name and the domain name > click Next... > choose the administrators of the 'other' group and the user name will be added to the local Admin group.

  The same script runs without error if it is launched after logon on the workstation with a domain administrator account.

  How can I get my script runs without error, when you are logged into the workstation as a local administrator?

  Best regards, Andy

  The code that I used came from here. If the syntax of the Add method is passed to oUser.ADsPAth to "WinNT: / /" & domainname & "/" & username, the script works correctly.

  Therefore, the modified script:

  Dim oNetwork: Set oNetwork = WScript.CreateObject ("WScript.Network")
  StrPC Dim: strPC = oNetwork.ComputerName
  Dim OGroup: Set oGroup = GetObject ("WinNT: / /" & strPC & "/ directors")
  Dim strUser: strUser = "WinNT://domainname/username."
  oGroup.Add strUser

  Thanks to Qasim Zaidi to show the code of work here.

  Best regards, Andy

• Passage of the maxl script batch file value.

  Hi gurus,

  I want the user to select the scenario he wants to clear the data for a specific intersection in a cube of ASO for running batch file. Files and newspapers is as below

  Batch file:

  ECHO please select a scenario:

  ECHO A. actuals

  B. Budget echo

  choice/m C:AB '-> > enter a letter for the scenario you want to delete: "%1 '"

  IF ERRORLEVEL is 1 Set ScenarioName = law

  IF ERRORLEVEL == 2 Set ScenarioName = bud

  E:\Oracle\Middleware\user_projects\epmsystem3\EssbaseServer\essbaseserver1\bin\startMaxl.bat "C:\Users\TCleardata2.mxl" % ScenarioName %

  MaxL file:

  spool to 'C:\Users\Cleardatalog.txt ';

  / * Value Variables * /.

  Set vScenarioName = $1;

  Echo script: "$vScenarioName";

  connection username pwd on "IP:1423 Server";

  / * Erase data * /.

  ALTER database abc.abc clear data in the region ' {("$1", Final, FY15, P2, ACC_1011640)}' physical;

  echo * clear full *;

  disconnection;

  spool off;

  Log file:

  Scenario: law

  MAXL > connection username pwd on "IP:1423 Server";

  OK/INFO - 1051034 - user [username@pqr] connection.

  OK/INFO - 1241001 - connected to Essbase.

  *****************************************************************************

  MAXL > alter database abc.abc clear data in the region ' {("$1", Final, FY15, P2, ACC_1011640)}' physical;

  ERROR - 1260052 - syntax error in a MDX query on line 1 to token entry ' "$1".

  *****************************************************************************

  Full Claire *.

  MAXL > disconnect;

  Username is disconnected

  ___________________________________________________________________________________-

  in the MAXL if I write: law instead of ' $1 ' it works fine, but I can't take the user input, it is question of syntax?

  Below the command works fine:
  ALTER database abc.abc clear data in the region '{(law, Final, FY15, P2, ACC_1011640)}' physical;

  Can someone please let me know what I'm doing wrong here?

  Thank you

  RN

  I don't think that (alone) allows in this case - the problem is that the single quotes around the specification of the whole region removes extension variable (see Variables).

  Double quotes lose about $1, but also replace the single quotes around the specification of the entire region with quotes, i.e.:

  ALTER database abc.abc clear data in the region '{($1, Final, FY15, ACC_1011640, P2)}' physical;

• Assign a ThinApps to user groups

  Hello

  I hope someone can help, I have a small question.

  You can assign thinapps by groups of users defined in Active Directory? At the moment we are allocation in pool or individual users according to their needs. I ask because we encountered a situation where a user has lost their vdi desktop and are to be given a new one with a completely different name, unfortunutely they lose some thinapp is assigned to them, unless he has received pool because it is received on the desktop and not a specific user.

  Kind regards
  Ross

  Create groups of application security in your ad.  Example:

  ThinApp_AdobeReader

  ThinApp_Office2010

  Create security groups and when you create the package you add groups when you are prompted for specific groups who can access this program.  Assign groups or users to security groups of applications that want to use it.  You can then use repository view ThinApp (as you do now) and he attributes the package to a pool but only people in the security group can actually run it.  Another way to do is run a script using ThinReg.exe and it will look at the security group and provide access to the program if the user is in the appropriate application security group.  It will also record requests for the correct files on the virtual desktop.

  Example script:

  Set WSHShell = WScript.CreateObject ("WScript.Shell")

  WSHShell.Exec ("/ q""%logonserver%\netlogon\thinreg.exe" "" "\\servername\thinapp repo\ * .exe" "")

• MaxL script saved on the server

  Hello
  
  I MaxL script created and save the server to service Regional Administration. I have users who can launch the EAS web, however, it seems to not be able to see my MaxL script. What I gives no specific law, so it can see and run the MaxL script.
  
  I already schedule MaxL, sometimes, it's just users want to run that, on a case by case basis.
  
  Thank you

  Hello

  When you save your script there is a sharing option. Try this.

• How to block Facebook for specific users by IP in NSA 4600 Sonicwall

  Hello

  I want to block facebook and youtube for some users in network using the IP of the user's computer or a MAC and allow other remaining users access facebook normally in Dell Sonicwall NSA 4600.

  Kindly guide me how it is possible in the firewall settings. Thank you

  Osama Aftab.

  You must configure the App control rules advance for block & FB access to specific users.

  Following article will give you heads upward.

  It is said in this article during the configurations block: activate & user/group of users Include: all THE (IE block FB for all users). You can use groups to exclude the user to authorize access to few IPs/users.

  

• Cisco ACS 5.3 - How only allow specific ad groups you want to connect

  Someone can help me to understand what I have wrong or missing?

  I have configured three specific AD groups, Admin, storage and HelpDesk, with their own sets of commands.

  It seems to work fine, but everyone can connect to any, but they can't do anything other than exit.

  My goal is to only allows don't not to open a session that is, do not part of the three AD groups that I've specified with the respective command sets.

  All connections to hit the Admin account, even if the id in the AD isn't in this ad group.  I've got something screwed up.

  Check your authorization rules, make sure that the default rule is not allowed. Group mapping is only the mapping of the internal groups of the ACS ad groups, we need to verify your authorization rules to see what strategies they users strike, you can reset the number of accesses and a test to see what policy is to allow access.

  Thank you

  Tarik Admani
  * Please note the useful messages *.

• Exclude the specific user to logging of GBA?

  Hello

  .

  My client and I are looking for a way to exclude servers AAA (ACS) for a specific user actions/commands, log if logging continues for other users as AAA clients on devices have been configured with networks:

  .

  AAA accounting-off Ganymede controls +.

  .

  I have found no solution so far, either on the side of the ACS, or on the side controls and aaa IOS.

  .

  (Although it looks like a potential security problem), can someone advise?

  .

  Thank you for your cooperation.

  Yvon.

  Yvon,

  Don't you can't exclude a single user to connect.  Accounting is a global command.

  I guess you probably have a script that generates a large amount of registration data?

  -Jesse

• ASA LDAP is not find memberOf Active Directory domain users group

  It seems that any group I have add an account for the ldap memberOf thinks it is except for the domain users group. Is there a specific exclusion of this group somewhere? It does not seem to be a problem with space in name, because if I test it with other default groups like domain administrators, it works. I get the same result of the ldap attribute card as long as you try to use the domain users group in a DAP policy. Debugging ldap 255 returns every other group membership for an account with the exception of users in the domain.

  When I run the command "sh filter LDAP ad 'Domain' group ' is the domain users group in the list of results, so he is able to see it and it exists."

  Please see the attached link under primaryGroupID, which states that the Domain Users group is not part of the memberOf attribute. http://msdn.microsoft.com/en-us/library/ms677943.aspx That explains why the mapping fails for any Domain Users as seen in the debugs

• MAXL script

  Hello

  Please nay one can me the maxl script

  We need display the filter with associated groups

  what filter is available for what group

  Thanks in advance

  
  

  Have you tried - display privilege

  See you soon

  John

• Export user group security settings

  Hello

  Does anyone know of an orderly way to export / retrieves the user group security settings configured? Would really help if we could see some of our user groups with a comparison side by side through export.

  Greg

  Hello

  Lol there is no way to export the settings of user group.

  You can download user, user to download you can check the history of product, checking for registered users, but there is no way to export the users group.

• OID 11.1.1.6 - belonging to the user group management

  Dear,

  Is there a way of OIDS to manage the users, via a specific user attribute group membership?

  You all know that in AD for example, it is an attribute of the user "memberof" that could be used for this purpose I tried looking in OID for a similar attribute and actually found this a "orclMemberOf", however I can't figure out exactly how to use it. I tried editing through DOHAD, but got an error "constraint violation". I also tried to use ldapsearch as mentioned in this post Oracle Fusion Middleware security: group membership Fast searches within the OID with the attribute of orclMemberOf, but the attribute is not returned in the search results.

  Any ideas... ? We just want to know if the only way to manage the belonging to a group is done using the attribute 'uniquemember' of the group, or if it can be configured on the user object.

  Thank you

  White

  That can only means that is not your attribute to multiple values of the group.

  The default value for the OID, groups have an objectclass of groupOfUniqueNames and their membership multi value attribute is uniqueuniquemember.

  So lets say, you want to know the groups the admin account is a member, your application would be as follows:

  (uniqueMember = cn = orcladmin, cn = Users, dc is sampledomain, dc = com)

  This would release all memberships that belongs to the user.

  -Kevin

• Portal of WC - need information about the Migration or DB tables for roles and users/groups.

  Hello

  We are to modernize the WebCenter portal for a client of 11.1.1.3.0 to 11.1.1.8.0.

  Anything can let me know the procedure of migration or the involved DB tables that store the roles and the "user groups &" under the administration of security.

  A manual level by recreating all roles and users and groups one by one is my last option.

  Thank you

  Jean Claude

  Hello.

  Do not recreate it manually.

  The documentation must guide for PS2 - PS7 migration explaining step by step what to do regarding the security / policies.

  Read it slowly and carefully.

  Using WLST backup/export/import of your policy store scripts / qualifications.

  Following links can help you understand the WLST Scripts for the migration of security:

  http://docs.Oracle.com/CD/E29542_01/core.1111/e10043/addlsecfea.htm#JISEC3639

  Custom security infrastructure controls WLST - 11g Release 1 (10.3.6)

  We have migrated many times of 11.1.1.4/5 to 11.1.1.8. Always on the PS3 (11.1.1.4) version.

  11.1.1.3 to 11.1.1.4 was the biggest change from my point of view. I never had the opportunity to PSx PS2.

  For migration tasks, my recommendation is to ask for doubts or things not clearly in Support of Oracle documentation.

  Kind regards.

• How to participate in the vote of user group?

  Hello.  I have several ERs which are statused as code 19 - approved for the voting group.  I want also to some of the other ERs of the knowledge base and some of them I want to defend.  How do you get to participate in the Group of users of P4P vote on ERs?

  Thank you.  BeckieC

  I'm sorry to hear that we won't see you at the user group.  This is the first time we did vote in a while, so we have not yet determined the specific logistics.  But you don't have to worry of not being at the meeting of the Group of real user.  We will set up a web conference and send some kind of communication to all customers regardless of their presence of user group.