May not wake sleep or close - C870-19th Satellite Pro mode

Similar Questions

• Satellite U500 - may not wake from sleep

  Hi all

  I have a Satellite U500 laptop win7 64 bit and my system may not wake from sleep mode.
  "Standby mode" when I press the power button or any key of the keypad power led lights up but the screen stays black and the system is unusable.

  Any help?

  Have you noticed this problem in the first moments after upgrade to Win7?
  I assume that you made a mistake with Vista?

  Have you noticed the same behavior when you use hibernation mode?

• Can not enter into the BIOS of Toshiba Satellite Pro S500-15W

  I am trying to enter a Toshiba satellite pro S500-15W bios. I tried the key F2 and FN + F2 keys don't set fixed no joy. Then downloaded the latest version (2013) the update of the bios for this series and windows 7, 32 bit. When I try to run the update I get the message "this computer is not supported". If anyone can help.

  Try to hold down the F12 key during the restart of the unit. You will see several options on the page that appears. You'll want to install at the bottom. I have the case of the warning you will are you aure you have win 7?

  Most of the time you get this error, or you have a different version, in this case 64 bit? or another OS 8.1 or 10? Take a look at your computer, control panel settings of IE - settings then you can ook at what OS you have and the 32-bit version of or64.

• Hardware card NETWORK does not appear in the Device Manager on Satellite Pro A40

  Satellite Pro A40 with XP home. The Integrated NIC does not appear in Device Manager.
  I booted Knoppix on CD, which correctly identifies the load hardware ethernet drivers, etc., and I am able to access the internet, so I know that the hardware is OK.

  Can anyone help?

  Do you mean the LAN card?
  What status of LAN card appears in Device Manager?

• Not able to use WPA on a Satellite Pro 4600

  Hi guys,.
  I am not able to set up authentication WPA on my Satellite Pro 4600. This possibility is not in the network authentication drop-down list in the Properties dialog box (only open and shared).
  Is there a support for WPA in the bed of the laptop LAN card?
  Please help me!

  Map of the mini PCI WLAN driver version is: 7.16.0.189
  OS: Windows XP SP2
  WZC autostart

  Thank you
  merenyia

  Hello

  Since the machine is a little older, I Don t think that your wireless network card is able to do the WPA encryption.
  There should still be a way to get the WPA for you. You can switch to another card that is capable of WPA and perhaps other speeds as 54 M/bits or faster.
  You can find these cards, mini-pci, for example, prices very low @ Ebay or in some computer stores.

  PS: It would be interesting to know what wlan card is installed on your system. So please check your device manager and tell me what type of card you have.

  Welcome them

• HP Color LaserJet M277dw MFP: HP Color LaserJet M277dw MFP - may not wake from sleep

  Hello

  This has been put to death elsewhere, but I have not found a solution that works.

  I'm close to return this product, but thought I'd have one last try here.

  I have a brand new HP Color LaserJet M277dw MFP. It works very well. Apart from one thing, when the printer goes into sleep mode, I can't he wakes again and accept print jobs. Sometimes go to the printer by pressing the touch screen and turning market working again, but if I just send a print job if it is 'sleep' mode, it prints ever.

  Printer is connected via wifi only, no other method of connection.

  Printer is assigned a static IP address 192.168.1.105

  DHCP is disabled in the printer

  IPv6 is disabled in the printer.

  IP address of the router is 192.168.1.1

  DHCP is enabled in the router with a starting address of the 192.168.1.150 and an address to 192.168.1.199

  DNS primary and secondary 8.8.8.8. and 8.8.4.4 assigned in the printer.

  I've updated the firmware inside the printer to the most recent version, as well as pilots of Windows 10.

  I tried to reset everything and turning everything (including the printer itself, the router and all other PCs, laptops, tablets, phones etc...) and the new, but no joy.

  Can anyone help please?

  Thanks and greetings

  Nick

  I ran the HP print and scan doctor software, and this update the firmware datecode 20160606 printers.

  So far, that * seems * fixed the awakening of sleep problem. Fingers crossed!

  Detective Conan.

  Thank you

  Nick

• May not wake my Equium P300 from sleep mode

  My * Equium P300-16 t * not waking up from sleep mode.

  If I use Fn F3 I get the message enter sleep and from what I read by pressing the power button wake the machine upwards, but not in my case.

  I also tried the Power Options to automatically mode after a specific period, but once again I can't wake the machine and do a hard reboot.

  My OS is Vista Home Basic.

  Anyone offers advice on how to fix this please?

  Thank you

  > but again I can't wake the machine and do a hard reboot.

  Your BIOS is up to date?
  Otherwise, update the BIOS

  Also in my experience sleep mode issues could be caused by corrupted system, so new facility could help solve this problem too.

• Satellite U405D-S2850: may not wake from sleep correctly

  Hello

  My U405D sleep and can only wake place properly if he does not sleep for too long. Too long as in more than 15 minutes or more. If the laptop has overslept, the laptop wakes up, goes to the awake routine (snoring), then stops with a blank screen. All the lights on the laptop are, except for the light that is above the touch pad. In the State of the blank screen, nothing does, and I pressed the power button to restart the laptop. I have recently updated the BIOS to version 1.5 of the 1.3 version that came with the laptop in the hope that the problem is resolved with the update of the BIOS, but the problem remains. I know not if the awakening is successful if the light above the touch pad is enabled. An idea or a similar experience? The laptop is running Windows Vista Home Premium SP 1.

  Thank you.

  In my opinion, there is absolutely no hardware problem. If I well remember these issues were present in the past and above all he has difficulty with the BIOS or patch updates.

  If you have a portable US model I recommend you to visit http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp. You will find updates useful support. Please also check ask Iris. Maybe you can find some technical document with a possible solution for this.

• May not wake my computer from sleep mode

  Hello!

  My computer wake from sleep very well. I stopped to do for awhile; then when I went to do it again, it wouldn't work. I don't know if this problem started; Therefore, I can't really do a restore on any given day.

  When I move the mouse or press the space bar, the computer seems to wake up from sleep - everything seems to work fine (fans, lights, etc...) -only the screen goes black and says he'll sleep because there is no entry for the computer. I push the button to turn off the computer completely the computer. When it restarts and I check for any problem in the event viewer, I can't find anything that might have caused this to happen.

  Windows Vista SP1
  Compaq Presario desktop computer
  2 GB OF RAM

  Here are the things I've tried so far...
  * I am logged - in as administrator of the computer
  * Checked with HP for the BIOS update - I've already been updated later on their Web site.
  * Using various Vista Web site tutorials, I played a bit with Windows power management settings (hibernate, sleep, hybrid, etc...).
  * Look for updates of video card - I already have the updated version.
  * Changed my Avast AV to moy.
  * Uninstalled AVG completely
  * Performed SCANNOW several times the last two weeks - no issue reported
  * A tried to generate a system health report, but I am not able to - see another question that I posted today.

  I've seen suggestions on remove the BIOS battery or reset the BIOS to its default settings, but I did not feel brave enough to do all of this - not found reassuring advice that will not destroy my particular computer: o) I went into the BIOS to have a look at the power management settings , but there was something I could do with them - absolutely nothing on the standby or Hibernate mode or whatever it is.

  THANK YOU for any help! I really appreciate it!
  Sincerely,
  Jenny

  Sure!
  You should be able to go to the Intel website and look for your video chipset.
  From there on, download the appropriate driver. I would put it on my desk as you can delete it when you are finished.

  Once it is downloaded, you should be able to just double-click and install it.

  I'm guessing that you went into the Device Manager. Who will stop you if the drivers are the same version.
  The other way will overwrite the old driver.

  In the worst case, you will need to uninstall the old drivers first and then install a new one.

  Good luck, let us know how it goes. Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• (Redirected) Reference DELL 5547 Fan starts while that closed down and drains the battery at 0%, especially may not wake from sleep

  Hello

  When I turn off my laptop the fan starts to spin then and during a night, it drains the battery from 100% to 0. I also have some problems of marketing. If the computer is in sleep mode itself or by me, I can't wake up, need button for 10 seconds and then push again and it starts. When turned on, it works perfectly but has these problems. I read somewhere that the resolution of these problems has been to remove the software intel from my computer and I did. It helped but 2 days computer started having these problems again. My system is Windows 7 64 bit. This problem started after that I have somehow left fully charged computer asleep on the charger for about 2 hours. When I came back fan was spinning and the right side of the laptop was hot. Again, battery life is great and computer has no defects during the work (all tests by dell are passed). What can you suggest me to do?

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Screensaver freezes and does not wake sleep mode computer using the mouse or keyboard

  Screensaver stops

  Hello

  My screen saver stops working after 2 or 3 minutes and sometimes the computer crashes? Running Vista Home Premium.

  I also 'wake up' the computer from sleep - move the mouse or the keyboard overlay help no problem. What is the right way?
  Nonsense without doubt butannoying me!
  Kind regards.

  SID

  You probably receive faster responses in the forum Vista, Perfromance and maintenance: Repost, please.
  http://social.answers.Microsoft.com/forums/en-us/vistaperformance/threads

  t-4-2

• After the closure of coverage may not wake up screen on Satellite Pro A200-1AE

  After computer remained some time with closed lid (just 3 minutes) I can't to get living on-screen. No pressure other buttons can help. All power save options and backrdop turned _are ignore. Use Windows XP. Computer still works, but screen is black.

  The only cure I've found is to be forced to computer in standby and just after this awakening mode it. But this isn't a good way. Never faced problem with my previous laptop in the same conditions. Guess that's some hidden power program to save as a package of Toshiba. How do we find out?

  First, you must install all hotfixes from Microsoft.
  Then update the BIOS, the graphics card driver.

  I noticed that my display didn t reactivation of the standby or hibernation mode.
  I've updated the BIOS. It's a key.

  Good bye

• External microphone not detected and faulty internal mic on Satellite Pro U400

  I have had several headphones with microphone and taken headphones 3.5 and the laptop just will not detect them. I tried to disable the internal sound system, or just the MIC internal, but not luck.

  The internal MIC is a (stronger if the external microphone is plugged) whirring background noise which means I can't use it for work.

  Any help is appreciated!

  Which is really strange.
  Are you using the original recovery image Toshiba and Toshiba driver sound?

  U400 is older model laptop and I would like to know since when you have this problem.
  I can't imagine that you got from day1.

• WXP could not start file is missing or corurupt - Satellite Pro A10

  Windows does not load file is missing or damaged. Start Windows by using the original installation cd please select 'R' at the first screen.
  I have 2 product recovery CD but I can't seem to operate.

  I think that there is no other way to reinstall the Windows operating system.
  If you want to use the Toshiba Recovery CD you need to boot from the right recovery CD.
  You said that you have 2 CD?
  Well, try to boot from CD 1. If this does not work, put the CD2 in the drive.
  Maybe they mix the label ;)

• DELL Inspiron N5110 does not stop and does not wake from sleep

  Hello.

  I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

  The laptop computer may not wake after sleep or either Hibernate.

  I tried all the solutions that advised you to all the other people in the forum who have the same problem.

  1. the laptop cannot stop mode safe either.

  2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

  3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

  4. I tried to install the latest NVIDIA video drivers. This did not help either.

  5 running only on battery change nothing - not cannot always stop.

  6 race only on AC adapter without battery - still cannot stop.

  7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

  ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

  8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

  9. I loaded the BIOS default settings (F9) - stop still can't.

  NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

  10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

  11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

  In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

  The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

  It is a new laptop.

  Please advice how to proceed. If you know which component fails please tell me.

  Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.