WXP could not start file is missing or corurupt - Satellite Pro A10

Similar Questions

• Windows could not start File: \Boot\BCD status: 0xc000000f on a HP G6 2053ef (RESOLVED)

  HI, I have this on my HP G6 2053ef, and I have an error message indicating that "an error occurred" trying to read the boot configuration data and also file: \Boot\BCD status: 0xc000000f

  How can I solve it please, I have windows won start t all hekp would be much appreciated.

  Kind regards

  Yvouille

  Hello

  The following assumes that you are running Windows 7.

  If you do not, use another PC to create a rescue CD Windows 7.  Download the ISO relevant among the links below - if you are unsure of the version, your laptop is listed as coming from a 64-bit installation.

  Windows 7 32 bit

  Windows 7 64 bit

  You must use an app like ImgBurn to burn the ISO to a CD-( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.

  One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu.  Insert the rescue CD.  Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER.  You can also get a prompt to "Press any key to" continuous - it if requested.

  When loading, select repair your computer and choose the command line.  When this charge, enter the following commands and press on enter after everyone – including spaces as shown.

  Bootrec.exe

  bcdedit/export C:\BCD_Backup

  c:

  Boot CD

  BCD attrib s h - r

  Ren c:\boot\bcd BCD.old

  Bootrec /RebuildBcd

  Bootrec /fixmbr

  Bootrec /fixboot

  Remove the rescue CD and try to restart the laptop.

  Kind regards

  DP - K

• Re: Could not start recovery disc HARD on my Satellite U840

  Hello

  Would appreciate any help on the issue. My operationg system going nuts and I want it back using the toshiba HDD reserved sector Recovery Wizard. Followed the instructions http://aps2.toshiba-tro.de/kb0/HTD1303440001R01RU.htm and called for the wizard, but the next screen that appears is "Please insert disc 1 and click the next button.

  No other options or guests. The Lalonde is almost brand new and I have not and recovery points again. Laptop has any optical drive either.

  What could be the problem and how to restore windows from the hard drive of State out-of-box?
  Thank you.

  Stand by. I put t understand exactly what is happening.
  Can you please provide a detailed description (step by step) what is happening exactly?

  When the system recovery options menu is shown is the Toshiba HDD Recovery option here? What happens when you click on this option?

• Once I turned on the computer I got the following message: Windows could not start because the following file is missing or damaged. System32\Drivers\Ntfs.sys

  I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:

  Windows could not start because the following file is missing or damaged;

  System32\Drivers\Ntfs.sys

  You can try to repair this file by starting Windows Setup using the original Setup CD

  Select 'r' in the first screen to start repair.

  Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:

  1: C:\WINDOWS

  Which Windows installation you want to connect?

  (to cancel, press enter)

  What do I put here?

  You must first start on doing something so USB drive a bootable Hiren.

  Here's how:

  I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).

  It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.

  You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.

  You can easily copy your personal data (documents, pictures, music) to an external drive.

  A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
  http://www.hirensbootcd.org/download/    (look to the bottom of the page).

  Unzip the Hiren to a folder where you can find it.  There's a Hiren. BootCD.15.x.iso that you have to then.

  Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:

  Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):

  http://Rufus.AKEO.IE/

  I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter!  This part makes me still a little nervous, so be careful.

  Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open.  Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).

  Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files.   Hiren ISO is also a good size.

  When RUFUS is finished, it will say "DONE" at the bottom.

  Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me).  If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.

  When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office.  You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!

  Remember: you do not start on your hard drive, - you started in the Office of the Hiren.

  A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.

  Sometimes that works, then you can also click on start, run and in the type box:

  cmd

  Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)

  CHKDSK c: /r

  This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do.  You may need to run more than once.

• PC with Windows Vista does not restart after installing updates, "Windows could not start...". "File:\Windows\system\winload.exe status: Oxcoooooof.

  Last night, I installed Windows updates on my HP Pavilion dv6227cl and now Windows will not boot.  I get the message "cannot start Windows.  A recent hardware or software change might be the cause.  File:\Windows\system\winload.exe status: Oxcoooooof Info: the selected entry could not be loaded because the application is missing or damaged.  I DO NOT have the Windows Setup disc.

  Hello

  I suggest you borrow the CD of windows vista to your friends

  Method 1:

  Step 1:

  I suggest you check in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Step 2:

  If you be able to start your computer in safe mode, I'd say make clean boot and check.

  Place the computer in a clean boot state, then check if it helps. You can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, make sure the computer to start as usual as mentioned in step 7 in the above article.

  Method 2:

  I also suggest you to see link and check.

  Error: Windows could not start. A recent hardware or software change might have caused the problem after installing Windows updates

  http://support.Microsoft.com/kb/2674065

• file mflmsv.dll (Rundll) could not start and unable to use iTunes.

  Original title: mflmsv.dll (Rundll) file

  When I connect it says that runndll could not start. In my view, it is up to my itunes.  When I went to a ph of windows, I downloaded zune.  I always have my iPod and an iphone and I can't seem to get my itunes to work

  Hello

  Please provide the following details.

  1. You get this error when you turn on your computer?
  2. What is the exact full error message?
  3. What happens when you turn on iTunes on your computer? It gives you an error message when it does not work?

  RunDLL is a legitimate Windows file that runs / loads .dll (Dynamic Link Library) modules, which can also be legitimate or sometimes malicious associated. RunDLL could not start message occurs generally when the .dll file that is configured to run at startup in the registry or as a scheduled task has been deleted. Windows attempts to load this file (s) but cannot locate because the file was most likely removed during an anti-virus or anti-malware analysis.

  I suggest to download AutoRuns and save it to your desktop. You can download it from the link below.

  Autoruns for Windows v11.70

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  1. Create a new folder on your hard drive called AutoRuns (C:\AutoRuns) and extract (unzip) the file there.
  2. Open the folder and double-click on autoruns.exe to run. Right-click and select run as administrator.
  3. Please be patient as it scans and fills the entries.
  4. When you are finished scanning, it will say loan to the downstairs and the list of all entries on the all tab.
  5. In the main menu, click file > find and type the name of the file (backgroundcontainer.dll) related to the error message, and then click Next.
  6. Alternatively, you can scroll through the list and find any writing about backgroundcontainer.dll and them.
  7. If found, right click on the entry, then select Remove.
  8. Out Autoruns and restart your computer when it is done.

  For the problem with iTunes, I suggest you to follow the steps below and check if it helps.

  iTunes for Windows Vista, Windows 7 or Windows 8: unexpected Fix closes or launch questions

  http://support.Apple.com/kb/ts1717

  Write us with the details asked, we will help you.

• No license file: could not start more

  Hello
  Installed Disqualification in WebLogic... then the Advanced installation steps, but got this error message when starting the server managed by a dndirector App. testing of the installation on Windows 7.
  
  INFO: Refreshing com.datanomic.director.startup.WebApplicationContext@1e4acce: display name [root WebApplicationContext]; start date [Thu Apr 18 17:20:24 EDT]
  2013]; root of context hierarchy
  NEWS: April 18, 2013 17:20:24: dn:director version 9.0.6 (895) starting
  April 18, 2013 17:20:24 com.datanomic.director.startup.WebApplicationContext loadBeanDefinitions
  GRAVE: No license file: could not start more
  NEWS: April 18, 2013 17:20:25: initialization of ZipServerServlet.
  < 18 April 2013 23:20:25 hours CEST > < opinion > < Log Management > < BEA-170027 > < server has established the connection with the Service of diagnosis level domain successfully. >
  
  EDIT:
  The app is looking for a file director.lic in the server\dndirector\WEB-INF\config directory, but the file does not exist here or anywhere for that matter.
  
  Thanks in advance.
  
  Notes:
  Development mode (JDK 1.6_29)
  WebLogic - plan.Xml
  Keystore demo provided by Oracle.
  SSL is enabled on the managed server to the disqualification and Admin.
  Deployed on the server managed of the disqualification.
  Created the required folders, tools, config, dndirector (copied the files required for them) (dndirector contains the directories in config and tools).
  Reboot all servers. dndirector began deployment (all started the active health and ok)
  
  Published by: owbdev99 on April 18, 2013 20:09
  
  Published by: owbdev99 on April 18, 2013 20:23
  
  Published by: owbdev99 on April 18, 2013 20:35

  Hello

  The initial deployment, Disqualification is a demi-cuite startup - just enough to put the web screens to complete the installation (point to the configuration directory and the database). At this point, it generates the appropriate license file. I think that this error can probably be ignored. You are able to get on the web pages of configuration to: http://application-tier server: port/deploymentname?

  Note that there is a topical issue with Weblogic SSL and Internet Explorer IE blocks the default certificate that WebLogic generates its key size. To work around this, you must either use a different browser (Firefox/Chrome, for example) or to generate a new certificate using the Weblogic documentation with a key RSA of 1024 MB size or more.

  Mike

• Today my Macbook Pro could not start.  He showed me the ban or no symbol.  I was able to access disk utility and run first aid on the SM0256G of SSD Apple media successfully.  Cannot start in normal/safe mode.  Should I delete/install so I can?

  MacBook Pro 13 '' end 2015.  256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start.  The progress bar with the Apple Logo would be present but would end not showing the symbol «»  I tried to boot mode safe - no go.  I have not reset PRAM help.  I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup.  The utility show me backups however when I would go to the next screen and no backup is available.  Disk utility displays the SSD.  Can I erase the disc and download OS X install?  Thank you.

  At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.

  You have already run disk first aid.

  Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.

• Windows could not start. Winload.exe corrupted

  Been having some problems with my Equius has therefore decide to start, F8 and do a system restore toshiba.

  Started and started to format the drive. All of a sudden he projected blue.

  The problem is now I can not even start until now to get the recovery/restore option. I get: -.

  Windows could not start. A recent hardware or software change might be the
  cause...

  File: \Windows\system32\winload.exe
  Status: 0xc000000f
  Info: The selected entry could not be loaded because the application is
  missing or damaged.

  Not sure how it all works, but I guess that recovery stuff are stored on a separate partition. Problem is I guess you must be able to start to load windows before you even get to do this?

  I downloaded and tried a boot with no joy, and of course vista recovery disk, toshiba provide a vista disk. How the hell can I recover from this situation?

  Hello!

  If you are not able to get in the boot menu for HARD drive recovery, you must use a Microsoft Vista disc to reinstall the OS.
  Or you use the Toshiba recovery disc but I think you forgot to burn the disk because normally you get a message (recovery point) you want to burn the disc.

  However, you can order a Toshiba Toshiba recovery disc directly:
  https://backupmedia.Toshiba.EU/landing.aspx

  Good bye

• Re: Visa does not start - \boot\bcd missing required information

  This morning, I tried to start Windows Vista on my Satellite Pro, and I get the following text appears on the screen: -.

  ----------------------------------
  Windows Boot Manager
  ----------------------------------

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  1. Insert your Windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on 'repair the youe computer.'

  If you do not have the disk, contact your manufactuer of computer or the system administrator.

  File: \Boot\BCD

  Status: 0xc000000d

  Info: The Windows Boot Configuration data file is missing required information

  -----
  ENTER = continue ESC = exit
  -----

  I found something similar on the Microsoft KnowledgeBase (http://support.microsoft.com/kb/927391), but according to the Windows Vista boot, all the proposed solutions require the installation of Vista media and I have just the recovery CD Toshiba base.

  When I try to boot my Toshiba Recovery CD, if I select "English (Windows Vista)" in the menu and go to the settings, the only selectable option is a scroll bar to choose what size I want to partition - for the option "Expert Mode: retrieves WinRE and the OS for the readers of the FIRST installation of TOSHIBA without affecting additional data disc" is grayed out.

  All I can do with the Toshiba Recovery CD is format the drive and lose all my data.

  I have a USB enclosure external that I put the disc in, and I have an XP machine that I can plug it in, then might be able to backup the drive but really the best option would be a way to fix rather than formatting.

  Does anyone have suggestions on how this can be repaired without the CD of Installation of Vista? Thanks in advance :)

  The Toshiba Recovery disk is not the same as the Microsoft Vista disc!
  Recovery disk contains an image that will not be able to repair your computer.

  The error message indicates that the Boot Manager is damaged or it s damage and you will need to boot from the ORIGINAL Microsoft vista DVD to repair it.

  If you don t have such a MS Vista DVD then I n t see chances to repair the operating system.
  So in this case, you need to reinstall the OS using the recovery disk.

  By the way; What happens if you press F8, immediately after the laptop has been started?

• XP machine does not start, vgaoem.fon missing or corrupt error

  Machine was shut down normally, but now we are getting the following error:

  Windows could not start. The following file is missing or damaged

  \windows\system\vgaoem.FON.

  You can try to repair this file by starting Windows Setup using the original

  installation CD-ROM. Select 'r' in the first screen to start repair.

  We have the configuration or the Start Menu, however is the only CD that we have CD of resettlement supplied with the machine.  How can we fix this?

  We went through the 315338 article - but no bootable disk.

  I would love to follow the instructions, but the cd supplied with the machine (Dell) is to reinstall Windows only.  We are unable to boot from it.

  Dells make it easy to start with the bootable CD. All you need to do is press F12 as soon as you turn on the PC. Then you will see a screen that looks like this:

  http://ImageShack.us/photo/my-images/70/bootdevicemenu2wz.PNG/

  Select the option for IDE CD-ROM device.

  Then, when you see this screen:

  http://www.adminxp.com/windowsxp/instxp1a.PNG

  Make sure you do exactly that! (Here, press any key on the keyboard so that you boot YOU from CD).

• Error message: "could not cop files. Make sure that the target disk is not dead", during the installation of the drivers scanner Epson Perfection V500.

  Original title: the scanner driver update problems.

  Problem: I am trying to install a driver for an Epson scanner update.  I get the error message: could not copy files.  Make sure that the target disk is not read-only.

  I'm running Windows XP Home edition.  Scanner is an Epson Perfection V500 Photo.

  What I did:

  • A release with the support of Epson.  They tell me that I have the admin rights.  However, I am the administrator and log on as administrator
  • I downloaded the epson driver update, which is an executable zip file.  I right-click on the file, select Run As..., opt to run it as an admin user, enter my password and select run.  The files are decompressed, but at some point in the installation, I get the message "couldn't cop files.  Make sure that the target disk is not read-only.  (Target is C:\)
  • Furthermore, I installed this driver successfully on my other computer that is running Windows XP Professional

  Why not copy the driver files?

  Hi Passport35,

  You can try the following steps and check if it helps.

  Method 1:

  You can try running the fixit article and following cjheck, if it helps.

  Diagnose and solve the program installation and uninstallation problems automatically

  Method 2:

  If the previous step fails then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  a. click Start, click Run, type cmd in the Open box and then click OK.

  b. at the command prompt, type sfc/scannow, and then press ENTER.

  Note: the scan may take a while, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.

  Wait for the analysis of complete and then check if you can install the drivers.

• Unable to backup get error 1608 the dependency service or group could not start

  Original title: unable to backup

  1608 the dependency service or group could not start. Task Scheduler does not

  Hi LesComan,

  Follow the suggestions below for a possible solution:

  Method 1: Try the SFC (System File Checker) scan on the computer.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2: I also suggest you temporarily disable the software antivirus (and any other security software) and firewall on the computer and see if that fixes the problem.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

   

  Firewall: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/firewall-frequently-asked-questions

   

  Caution:

  Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if it helps.

• Windows could not start. A recent hardware or software change might be the cause. (vista)

  I've updated pctools free and there was a mistake by because it came when the computer restarts,

  Windows could not start. A recent Ministry of hardware or software may be the cause. To solve the problem.

  1. Insert the windows installation disc and restart your computer.
  2. choose your language settings, and then click "next".
  3. click on "repair your computer".

  File: \windows\system\drivers\PCTCore.sys

  status: 0xc0000098

  Info: windows could not load a critical system driver is missing or corrupt.

  I tried I went to my computers startup options advanced and tried to run in safe mode, but the same previous screen came. Each option in my boot options is the same screen. I realize that to solve this problem, I might have to reload my OS together.  I tried to put what I believe to be the installation disc in and restart but it starts and says the same message. I don't know how to start from the DVD.

  Someone at - it solutions?

  Change the boot order in the BIOS to boot from the CD drive first.
  How to change the boot sequence in the BIOS
  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  C:\windows\system32\drivers\pctcore.sys file information
  http://www.file.NET/process/PCTCore.sys.html

• I get a message from Windows could not start whenever I turn on my computer.

  Original title: Windows could not start.

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem:

  (1) Insert your disc to Installations of Windows, and then restart your computer
  (2) select language settings, and then click "next".
  3) click on "repair your computer".

  If you do not have the disk, contact your system administrator or computer manufacturer for assistance.

  File: \Windows\system32\drivers\volsnap.sys

  Status: 0xc0000221

  Info: Windows could not load a critical system driver is missing or corrupt.

  ***
  Whenever I restart the computer, this is the window that appears and I can't go in front of her.  It cannot boot without failure, or any other mode.

  ANY help is appreciated! I don't have the original installation disc for Windows.  And since I can't go beyond that I can't the product key...

  My computer is a Sony Viao VGN-N350E

  mnmshemi

  Hello

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  and if all else fails and you need to reinstall vista are the normal methods for computers preinstalled vista portable

  Contact the computer manufacturer and ask them to send vista recovery discs

  they do it for a nominal cost of $

  also ask them if you have a recovery partition on your hard drive to get back to the way you bought

  you would normally press F10 or F11 or Alt + F10, 0 at startup to start the recovery process according to the manufacturer

  Ask them of the exact key sequence