Maybe corrupted PSD file?

Similar Questions

• Recovery corrupted PSD under Windows

  Hello

  I recently had a power outage, resulting in my being corrupted photoshop file. The error, it is said, "file is not compatible with this version of photoshop.

  I tried several avenues of restoration, such as the others. PSD, reading programs, open it in Illustrator, various recovery tools download, restore previous versions (it's in had not listed), but nothing has worked.

  I hope someone has ideas about how the file may be damaged, and if there is anything else I could do to get it back.

  I am running Windows 7 and Photoshop CS6.

  Please do not post tips on how to avoid this in the future, or what I could do. I know.

  Thank you

  You need more of a reading of PSD program if the order of byte in the file is damaged. A data recovery tool can be worth a try. I used Phoenix PSD repair successfully in the past. Unfortunately, it is a commercial product and not free-autour $ 40, so it really depends on how much value place you on the damaged file. There is a download test and memory, it allows the file to be recovered, but not saved, so that you know it will work up to a certain point before you buy. I must say though that with the corrupted PSD files sound usually a question of recovery layers because there will always be some corrupted this layer.

  My APC battery doesn't have Christmas, reading that your post made me decide to do replaced lol

  Stellar research

  Hope that helps

  Terri

• CANNOT OPEN THE PSD FILE

  I am running PS CS6 display and it is "could not complete your request because it is not a document valid photoshop" after a power failure. I tried lots of different process to resolve my PSD download PSD file file.  Help, please.

  The file is probably damaged and unreadable by PS.

  I've never had this happen to me, but here's a link to an article that may be useful:

  How to recover corrupt PSD files? ~ Fantasio ars

• Repair damaged adobe photoshop .psd files?

  One of my project files has been removed in a terrible accident. I won't go into it, but I got one of the .psd files using a commercial conservation program (Fast File Undelete data DTI). It did not work (go figure) and whenever I try to open the file .psd photoshop (7.0) shows a message box that says: "there was a problem to read the data in the layer. Read the composite data instead? "When I click on the play button of Composite data another box shows that reads,"cannot open '[file name]' because the file is not compatible with this version of photoshop. »

  It seems as it is very close to work, because there isn't even a vignette. I also got a handful of .jpg and .tga, who are also broke. Does anyone know of a utility that could attempt to repair a .psd, .tga or a .jpg?

  Repair Kit PSD that repairs the Photoshop files and you give image repaired to the original format as well as repaired layers and the corresponding safe bitmap file.

  -Repair of PSD files developed using any color mode of Photoshop

  -Repairs corrupt the PSB ("large document format") files

  -Fix images with the DDP file extension

  -Provides the bitmap of the repaired Photoshop file

  -Takes to load Adobe Photoshop CS5, CS4, CS3, CS2 CS1

  DOWNLOAD SETUP FROM HOMEPAGE: http://www.psd.repair/

  SECOND FREE SOLUTION:

  Photoshop is adding sometimes a few bytes at the beginning of the file when the file is saved, then the same Photoshop gives an error and complained that the files... All you have to do is delete the Group of bytes that unnecessarily.

  Assuming that you know already what is a HEX editor and how to use it I'll write here a few steps, you can do before opening a "corrupt": PSD file

  1. make a backup (copy) of the file before making any changes.

  2 - Open the file "corrupted" in a HEX editor used (text editor NOT!) and look for such groups of fairness at the beginning: 8 bits/s and after a few bytes 8BIM another group of bytes, then 8BIM.

  3 - this succession must be respected strictly: 8BPS... 8BIM... 8BIM. these groups should be very close to each other and it is easy to find.

  4 - remove all the bytes before 8 group BPS (shift + delete) and save the file... =)

  5 - open in Photoshop and have fun.

  Hope this works for you, for wide info click to:- 6851/how-to-make-photoshop-file-recovery?forum=w7itprogeneral http://social.technet.microsoft.com/Forums/exchange/en-US/7041fd54-6d06-466d-9bf0-30845860

• All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

  All my adobe files are corrupt. I saved them on my computer, my external hard drive and flash players. All report them at the same time as all my PSD files and I are corrupt.

  My computer recently had an error with the System 32 and will not open if I reformat, which means I lose everything on it. No problem, because I supported straight? It turns out that all my backups say they are corrupt. Do I just terrible luck, or is there a reason why none of my files works when I try to open them on another computer?

  Try the bugcheck on the ext hdd. Right click on the drive in 'my computer' > 'properties' > 'Tools' > click 'check now '.

  You can restart your pc and reconnect the ext hdd.

  Recuva Piriform is a free data recovery program.

  Google for more solutions

• After Reinstalling windows 7 stopped opening PSD files.

  After Reinstalling windows 7 has stopped opening some files PSD files. I try to open them with Photoshop version 6, it does not work. I tried to open them on the laptop, same garbage. Tell me what is the problem. And how to fix it. Thank you.

  Maybe these files have been corrupted. I can't say how it happened, but it is quite possible. And the files are no longer open, immediately after reinstalling windows? Or not?

  If so, it is very rare in my opinion. You are very unlucky. Try to reinstall photoshop. Then check that these files have been opened or not. In the opposite case. Then the only solution is a special software. I would use this program http://www.photoshop.recoverytoolbox.com/ on your site

  (it is not free but is very good and is not expensive. But in the future you will be immune to such situations. )

  So you can learn more about your problem here: http://www.filerepairforum.com/forum/adobe/adobe-aa/photoshop/207-can-t-open-a-psd-file-th rough-photoshop

• Vista seems to be corrupt JPEG files which XP was ok with

  JPEG files which I have kept for many years and transferred on CD have been very well until I changed from XP to Vista a few years previously. My work with videos and still images has been very well with Vista t but glancing back older jpegs, I find that the copied versions on XP to Vista have a high percentage of images corrupted. It's complicated by the fact that Vista will not recognise the CD with XP.

  Can I recover files corrupted on Vista?

  There are forum copious comments on Vista corrupt JPEGs, yet Windows answers hardly addresses the issue (on the last page of 50 pages of customer problems).

  I wonder if I've lost these photos forever?

  Stewart Robertson

  New Zealand

  pH

  No guarantee... but it may be worth trying to install
  a UDF reader:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Free... Volume UDF - 7.1.0.95 player
  http://www.Roxio.com/enu/support/UDF/software_updates.html
  (Filename: updateudfreader_7.exe)

  If this does not work... and the CD are very important... the following
  software retail sales can be worth a try:

  IsoBuster
  http://www.IsoBuster.com/
  (Windows XP, VISTA, 7)

  Contents of the help of IsoBuster
  http://www.IsoBuster.com/help.php

  Starting with IsoBuster
  http://www.IsoBuster.com/help.PHP?help=110

  More... info...

  If some of your photos are corrupt... There are programs
  designed to get back them... a Google search for
  Recover corrupted JPEG files
  Maybe worth a try...

  The following programs are not free, but the demo
  versions will be preview files that can be recovered.

  PixRecovery
  http://www.OfficeRecovery.com/PixRecovery/

  Stellar Phoenix digital media recovery
  http://www.stellarinfo.com/digital-media-recovery.htm

  JPEG recovery
  http://www.hketech.com/JPEG-recovery/index.php

  Good luck...

• Corrupted master file table

  By turning on the laptop computer Inspiron my son receives the message "checking file system on D the type of file system is NTFS volume lable in recovery, one of your disks needs to be checked for consistency.  You can cancel the disk check, but it is strongly recommended that you continue. Window to check the disc.  Corrupt master file table. Windows will try to recover the master files of the disk table.  Windows cannot retrieve the master file table.  The disk check abandoned. The computer will not beyond this point

  What this means, and it can be fixed.

  Hello

  Boot from the recovery disc or a DVD of Vista (maybe copy from a friend who are not protected against copying).

  Command prompt

  CHKDSK /f /r

  How to use the command prompt
  http://www.bleepingcomputer.com/tutorials/tutorial147.html

  From the DVD command prompt often works when it won't otherwise.

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Help! PSE14 now crashes when trying to open the complex PSD file

  Today, whenever I try to load a quite complicated PSD file, PSE14 crashes and I have to end task it. Here are the files that I have worked with. They charge fine until today.

  I rebooted, but the problem persists.

  I had this problem when the assessment initially PSE, and mysteriously, it resolved itself.

  There was an upgrade of Windows 10 last night. Maybe it was the question? I need to be able to access these files.

  Thank you!

  Al

  See this thread:

  Eight years of text Tool Crash and no Solution? Really?

• Corrupted PSD

  Hello

  I was working on a PSD and registered, as I do every 20 minutes or more

  And now present with this error:

  "Could not apply the workspace because the file is not compatible with this version of Photoshop."

  Can anyone help to suggest a solution please?

  Unfortunately, it seems that the file is corrupted. There was someone else with the same problem and what we tried does not solve the problem. The only thing I can say is, in the future, save a new file every 30 minutes or so rather than saving over the original.

  For more information, you can also see this thread. Although old, it contains information you may find useful: a PSD file to restore damaged

• Why is it we cannot import layered psd files in Muse?

  Hi people...

  I started just to enter the Muse and find it a great new option for designers like

  me who are not coders. But there has been a little frustrating things I met so far.

  What I ask here is... Why can not import a layered PSD file into Muse so that it opens with layers

  and the place to watch as the composite images? Instead we must import a composite image 1.

  Then go back to import and implement several layers at once which do not come in assembled but also outside

  parts of the place. Then to start assembling the design of the site we spent time in PSD design

  as there corresponds to the composite image puzzle.

  Adobe has been showing how powerful it is to be able to import a psd file into Muse. But we are not really

  fact that... Well well, with layers and composite image intact. Which adds tons of time that could have been

  better spend on something else. In addition, to make things even more tortuous we create is no longer working

  bearings in PSD and rather do somersaults through other apps for something so simple.
  Maybe I'm missing how these things are done in a more fluid way?

  If not... I can add 'really' import PSD files in layers with the States of working capital to the wish list?

  Thank you... Sorry if I frustrated look. I'm... I just spent 3 x the time needed to create a site with simple bearings header.

  Zoot

  Hello

  I'm a geek of speed here, and I wonder why you would ever want this. I learned very early with Muse of PSD files take up a ton of space, and this slows down your site.

  In fact, I learned to go in the complete opposite direction and save my PSD images to the exact size, when possible to 150ppi if it displays OK and with a JPG quality to 8-10.

  If you make a site that you expect other people to use, and especially on mobile, you can think about the size of the file or forget quality SEO.

  If you are looking for a picture of performance (speed/load time) site is max is to save MB each.

  Otherwise I do not know the answer to the question of the layer.

  I always say in situations like this do not devote the necessary time if you found nowhere BUT work on other priorities of the site.

  Good luck!

• PSD-file is not compatible

  Open a psd file in Photoshop CC 2015, the program responds by saying that the file is not compatible. I made the file CC2014 or CC2015 and then worked on it in CS6. Now it does not work on two programs

  Changes with each new version of Photoshop PSD file format, so it is built into the functionality of compatibility built in for when you save should you want to go back and use earlier versions. It was not many changes between PS2014 and PS2015 but CS6 is old and there are differences.  It seems that if you have which off preference saving mode of compatibility and openness to CS6 corrupt the file. .

  

  To activate the dialog box above go to preferences under Edit and change there.

  

  If your file is large PSD files can be repaired with a tool like repair PSD of Phoenix, but you'll probably lose something.

  Hope that helps

  Terri

• How to fix the damage psd file?

  Hello!

  My computer crashed today while photoshop CS5.1 economy/write in a psd file. When I started my computer to the top and tried to open it again, it displays only 1 layer shown as a corrupt image (as shown - red in the Image below). When I click on the file in the window 'Open' (The Gray Image below), the psd is displayed correctly in the preview window, but does not display correctly when opened. Help, please...

  Open it, and then under file > file Info, make sure it is not a code there that shouldn't be there, then he re-record as .psd or .tif

  Do not click on strange links that may be present (although sometimes there links to copyright in the field of copyright which are legitimate identifiers.)

  Sometimes, when I get questions like this, and there is nothing in the actual file information, this may mean that there is something in the code of the actual image. Then I opened in GraphicConverter and save as .tif or .psd. It clears sometimes upwards.

  A .jpg file is not a page layout format. Quark hate them. Never had any problems in Indesign with them but they are compressed.

  Also read comments on the sites below:

  df87/how-do-i-recover-PSD-files?Forum=itprovistadeploymenthttp:// https://social.technet.Microsoft.com/forums/Windows/en-US/b826785a-3b69-4e63-ac62-fabec7e3

  http://www.filerepairforum.com/Forum/Adobe/Adobe-AA/photoshophttp ://

• How to restore the PSD file accidentally crushed by preview after the closing?

  Hello

  I recently registered and closed a file psd with many layers, and now when I opened it again it is a flattened image.  According to me, which may occur in the East after closing photoshop, I wanted to take the last look at the image and opened it in preview.  After saw closing and stop of my laptop, I have opened the image this morning and now it is flattened but still a psd.  Usually an excerpt asking you if you want to make changes to the images, but I never got a notification (recently updated to Yosemite, then maybe this feature is no longer available)

  Is it possible to restore the psd for the last time that I saved it in photoshop?  I heard that there is a way to read your story/brush strokes in your last session (scripts?) but I'm not entirely sure of how this works.  Help, please!

  Thank you ~.

  Problem solved!

  It turns out that Preview has the opportunity to restore the images to what they were before the changes have been made.  By doing this I revenue the psd file flattened (flattened during the rotation of the image) to the original with layers.  For the future I will make sure that all of my images are locked in the window.

  Thanks for all the help, I really appreciate it!

• Will not open a psd file?

  I was working on a psd file when my computer turns off randomly, and now this file will not be opened due to an error of "program." I was wondering if anyone knew what went wrong or how I could open the file again?

  Without knowing all the details of your system, no one can advise you more specifically. Generally speaking, however, the file is maybe just damaged beyond recovery. Here are some tips that you might try:

  Safety of work file

  Otherwise, you can simply learn the art of versioning of such file as explained in this article.

  Mylenium