MDS 9216, I can't telnet remote MDS

Similar Questions

• iPad Pro. The keyboard can be used remotely (not physically attached) or you can use a standard apple wireless keyboard

  iPad Pro. The keyboard can be used remotely (not physically attached) or you can use a standard apple wireless keyboard

  I assume that you mean the keyboard built into the 'smart cover' - it must be in contact with the iPad.

  A wireless keyboard Apple has been reported as working with an iPad Pro. Plug Apple for the new State of "magic keyboard" that it requires a Mac with os x 10.11 or later - he does not mention the iPads. Third-party Bluetooth keyboard should work.

• I can two commputers remote 100 miles?

  I have a computer in Va.I also have a computer in Md.Can I have remote office?

  Yes:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Remote-Desktop-connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection
  http://support.Microsoft.com/kb/315328

• Can't telnet in VPN

  I have a lotus domino within the network server. When I connect with my IPSEC VPN, I can't telnet to the internal address. Because I have a nat govern together pointing upwards on the outside, I can still telnet to the external IP address with telnet x.x.x.x 1352 and connect. Why not be able to telnet to the internal address? Regarding everything else inside, I have no problem to access anything whatsoever to my VPN session I've tried.

  Config:

  !

  AAA - the id of the joint session

  !

  !

  dot11 syslog

  IP source-route

  !

  !

  !

  !

  IP cef

  IP domain name xxxxx

  name of the IP-server 192.168.100.102

  IP inspect name by DEFAULT-INSPECT icmp

  inspect the IP tcp by DEFAULT-CHECK name

  IP inspect name by DEFAULT-CHECK udp

  No ipv6 cef

  !

  Authenticated MultiLink bundle-name Panel

  !

  aes encryption password

  !

  !

  the SOURCE_MGMT object-group network

  192.168.100.0 255.255.255.0

  173.160.106.40 255.255.255.248

  71.63.249.0 255.255.255.0

  !

  object-group service SSH

  TCP - udp eq 22

  !

  username admin privilege 15 secret 5 Iu22 $1$ $ OiNXyxdNEkJiCzf3ulYe20

  username privilege 15 secret 5 greyduck MNkY $1$ $ cpYetNgs4sPtiSg/ldVD31

  !

  !

  crypto ISAKMP policy 3

  BA 3des

  preshared authentication

  Group 2

  !

  Configuration group customer isakmp crypto LEFxxxx

  key xxxxx

  DNS 192.168.100.102

  win 192.168.100.102

  xxxx.local field

  EWL-pool

  ACL 120

  !

  !

  Crypto ipsec transform-set esp-3des esp-sha-hmac RIGHT

  !

  Crypto-map dynamic dynmap 10

  Set transform-set RIGHT

  market arriere-route

  !

  !

  map clientmap client to authenticate crypto list userauthen

  card crypto clientmap isakmp authorization list groupauthor

  client configuration address map clientmap crypto answer

  10 ipsec-isakmp crypto map clientmap Dynamics dynmap

  !

  Archives

  The config log

  hidekeys

  !

  !

  property intellectual ssh time 60

  !

  !

  !

  interface FastEthernet0

  !

  interface FastEthernet1

  !

  interface FastEthernet2

  !

  interface FastEthernet3

  !

  interface FastEthernet4

  IP address x.x.x.65 255.255.255.0 secondary

  IP address x.x.x.67 255.255.255.0 secondary

  IP address x.x.x.68 255.255.255.0 secondary

  IP address x.x.x.69 255.255.255.0 secondary

  IP address 255.255.255.0 XXX1

  NAT outside IP

  IP virtual-reassembly

  automatic duplex

  automatic speed

  clientmap card crypto

  !

  interface Vlan1

  IP 192.168.100.15 255.255.255.0

  IP nat inside

  IP virtual-reassembly

  !

  IP local pool LEF - 192.168.11.10 192.168.11.20

  IP forward-Protocol ND

  IP route 0.0.0.0 0.0.0.0 x.x.x.254

  IP route 172.16.100.0 255.255.255.0 192.168.100.90

  no ip address of the http server

  no ip http secure server

  !

  !

  IP nat pool XXX1 WAN XXX1-the prefix 24 length

  IP nat pool WAN-65 x.x.x.65 x.x.x.65 prefix length 24

  IP nat pool WAN-67 x.x.x.67 x.x.x.67 prefix length 24

  IP nat pool WAN-69 x.x.x.69 x.x.x.69 prefix length 24

  IP nat pool WAN-68 x.x.x.68 x.x.x.68 prefix length 24

  IP nat static source 192.168.100.214 x.x.x.68

  IP nat inside source list 100 pool WAN overload

  overload of IP nat inside source list 101 pool WAN-65

  overload of IP nat inside source list 102 pool WAN-67

  overload of IP nat inside source list 103 pool WAN-68

  overload of IP nat inside source list 104 pool WAN-69

  IP nat inside source static tcp XXX1 25 expandable 25 192.168.100.213

  IP nat inside source static tcp extensible XXX1 80 80 192.168.100.213

  IP nat inside source static tcp 192.168.100.213 XXX1 110 110 extensible

  IP nat inside source static tcp extensible XXX1 139 139 192.168.100.213

  IP nat inside source static tcp 192.168.100.213 XXX1 extensible 143 143

  IP nat inside source static tcp extensible XXX1 389 389 192.168.100.213

  IP nat inside source static tcp 192.168.100.213 extensible XXX1 443 443

  IP nat inside source static tcp 192.168.100.213 extensible XXX1 445 445

  IP nat inside source static tcp 192.168.100.213 XXX1 extensible 1352 1352

  IP nat inside source static tcp 192.168.100.213 XXX1 extensible 3101 3101

  IP nat inside source static tcp 192.168.100.197 6001 XXX1 extensible 6001

  IP nat inside source static tcp 192.168.100.213 7443 XXX1 extensible 7443

  IP nat inside source static tcp 192.168.100.213 8080 XXX1 extensible 8080

  IP nat inside source static tcp 192.168.100.213 XXX1 extensible 8085 8085

  IP nat inside source static tcp 192.168.100.213 8642 XXX1 extensible 8642

  IP nat inside source static tcp 192.168.100.213 8889 XXX1 extensible 8889

  IP nat inside source static tcp 192.168.100.213 28315 XXX1 extensible 28315

  IP nat inside source static tcp 192.168.100.213 50125 XXX1 extensible 50125

  IP nat inside source static tcp 192.168.100.220 3389 XXX1 extensible 63389

  IP nat inside source static tcp 192.168.100.161 x.x.x.65 21 21 expandable

  IP nat inside source static tcp 192.168.100.161 extensible 3389 3389 x.x.x.65

  IP nat inside source static tcp 192.168.100.161 4899 x.x.x.65 extensible 4899

  IP nat inside source static tcp 192.168.100.174 80 x.x.x.67 80 extensible

  IP nat inside source static tcp 192.168.100.174 x.x.x.67 expandable 443 443

  IP nat inside source static tcp 192.168.100.174 extensible 3389 3389 x.x.x.67

  IP nat inside source static tcp 192.168.100.214 80 x.x.x.68 80 extensible

  IP nat inside source static tcp 192.168.100.214 1352 x.x.x.68 1352 extensible

  IP nat inside source static tcp 192.168.100.214 1533 1533 extensible x.x.x.68

  IP nat inside source static tcp 192.168.100.161 8088 x.x.x.68 extensible 8088

  IP nat inside source static tcp 192.168.100.202 80 x.x.x.69 80 extensible

  IP nat inside source static tcp 192.168.100.202 1494 x.x.x.69 extensible 1494

  IP nat inside source static tcp 192.168.100.202 2598 x.x.x.69 extensible 2598

  IP nat inside source static tcp 192.168.100.202 6001 x.x.x.69 extensible 6001

  IP nat inside source static 192.168.100.202 x.x.x.69

  !

  extended access IP MANAGEMENT list

  allow a SSH object-group SOURCE_MGMT object-group

  OUTSIDE extended IP access list / Interior

  !

  recording of debug trap

  access-list 11 allow 192.168.100.161

  access-list 12 allow 192.168.100.174

  access-list 12 allow 192.168.100.192

  access-list 13 allow 192.168.100.214

  access-list 14 allow 192.168.100.202

  access-list 100 deny ip 192.168.100.161 host everything

  access-list 100 deny ip 192.168.100.174 host everything

  access-list 100 deny ip 192.168.100.192 host everything

  access-list 100 deny ip 192.168.100.202 host everything

  access-list 100 deny ip 192.168.100.214 host everything

  access-list 100 deny ip 192.168.100.0 0.0.0.255 host 192.168.11.10

  access-list 100 deny ip 192.168.100.0 0.0.0.255 host 192.168.11.11

  access-list 100 deny ip 192.168.100.0 0.0.0.255 host 192.168.11.12

  access-list 100 deny ip 192.168.100.0 0.0.0.255 host 192.168.11.13

  access-list 100 deny ip 192.168.100.0 0.0.0.255 host 192.168.11.14

  access-list 100 deny ip 192.168.100.0 0.0.0.255 host 192.168.11.15

  access-list 100 deny ip 192.168.100.0 0.0.0.255 host 192.168.11.16

  access-list 100 deny ip 192.168.100.0 0.0.0.255 host 192.168.11.17

  access-list 100 deny ip 192.168.100.0 0.0.0.255 host 192.168.11.18

  access-list 100 deny ip 192.168.100.0 0.0.0.255 host 192.168.11.19

  access-list 100 deny ip 192.168.100.0 0.0.0.255 host 192.168.11.20

  access-list 100 permit ip 192.168.100.0 0.0.0.255 any

  access-list 101 deny host ip 192.168.100.161 192.168.11.0 0.0.0.255

  access-list 101 permit ip 192.168.100.161 host everything

  access-list 102 refuse host ip 192.168.100.174 192.168.11.0 0.0.0.255

  access-list 102 refuse host ip 192.168.100.192 192.168.11.0 0.0.0.255

  access-list 102 permit ip 192.168.100.174 host everything

  access-list 102 permit ip 192.168.100.192 host everything

  access-list 103 refuse host ip 192.168.100.214 192.168.11.0 0.0.0.255

  access-list 103 allow the host ip 192.168.100.214 all

  access-list 104 refuse host ip 192.168.100.202 192.168.11.0 0.0.0.255

  access-list 104 allow the host ip 192.168.100.202 all

  access-list 120 allow ip 192.168.100.0 0.0.0.255 any

  !

  !

  !

  !

  !

  RADIUS-server host 192.168.100.212 auth-port 1645 acct-port 1646

  RADIUS RADIUS-server key

  !

  control plan

  !

  !

  Line con 0

  no activation of the modem

  line to 0

  line vty 0 4

  The access-class MANAGEMENT in

  entry ssh transport

  !

  max-task-time 5000 Planner

  end

  Lef871 (config) #.

  Hello

  You have got it. Conditional static NAT is the right way. You must stop the NAT translation for the address pool VPN inside. Another solution is to use the tunnel, dynamic or static for your VPN traffic. NAT outside are your physical interface, not in the tunnel. If the NAT will not do the translation if she sees that the outgoing interface has no NAT outside.

  HTH,
  Lei Tian

  Sent by Cisco Support technique iPhone App

• You can specify several remote servers (live)?

  I have selected a server for testing, but we have several live servers to balance the load.

  How can I specify a total of 3 remote servers or more?

  Hello

  You can add several remote server from the site configuration window. This dialog accessible via the file menu > manage sites. This will launch manage sites dialog box. Choose your site and in the server category, add as many remote servers you want. But you can only choose a single server at a time.

  Thank you

  Confidante

• I can do 2 remote calls at the same time?

  Hello

  I can do 2 remote calls at the same time? For example, if I have the following remote objects:

  "" < mx:RemoteObject id = "myRemote" destination ="zend" source = "MyData" showBusyCursor ="true"fault = "faultListener (event)"> "

  " < mx:method name ="getData"result ="getDataListener (event)"/ >

  < / mx:RemoteObject >

  "" < mx:RemoteObject id = "myRemote2" destination ="zend" source = "MyData2" showBusyCursor ="true"fault = "faultListener (event)"> "

  " < mx:method name ="getData2"result ="getDataListener (event)"/ >

  < / mx:RemoteObject >

  And I call them at the same time:

  public function myFunc (): void {}

  myRemote.getData ();

  myRemote2.getData2 ();

  }

  Will it work? Flex will be "confused" the results of a call with the results of the call on the other? Do I need an AsyncToken? If so, how to use an AsyncToken in the example above?

  Thank you

  -Laxmidi

  I do it all the time. I call the one for control combobox with a list of people, a

  and with these data on people filling a datagrid. Then use the drop-down list to filter the datagrid.

  In your sample well mak result = "getDataListener (event) another" and name it getDataListener2, so there is a separate and a dataprovider for the first to the second. "

  If your going to the same event, the other will replace the first.

  Hope this helps

• ARD can not see remote clients via VPN

  Hi all. I found not been able to find an answer to what works. I appreciate the help.

  I have two networks, home and office, be it online by a router in Time Machine. I set up a VPN server in the office. I can however connect with success at home and can go up to the servers and can control the computer server in ARD. But I don't see any other machines on the network of the company unless I enter their IP directly, and even then I can't control them. I can control the server, and it can see and control the other remote machines. If I'm in the office, I can see and control all machines on the network.

  The network router is set to distribute addresses 10.0.1.2 - 200. The home network is set to distribute addresses of 10.0.1.201 - 250. The VPN server has address 10.0.1.250 - 255.

  What Miss me? Thank you very much.

  for VPN works normally your networks must be in a different IP address ranges

  you have everything in 10.0.1 range

  for example the Office Network 10.0.1.xxx

  network servant 10.0.1.xx

  This is maybe the reason why you cannot control the machines.

  VPN requires the Remote LAN to be on a different subnet/ip range

  If they are no routing etc. can get screwed up like router/VPN cannot know where things are

  Try to change your home network to a range of ip address/subnet different example 192.168.1.xx

• I can not find Remote Desktop on my OSX 10.11

  I'll try to find the Remote Desktop App on my OSX 10.11 system

  but I can not find...

  Please help me.

  Maybe you're getting confused? Unless you bought the App on the App Store, you won't have it and so you won't find it. What is integrated into the operating system is the ARDAgent, the client part of the App part whole that ARD "exploits".

  You can also something could have trouble with the ARDAgent itself (maybe you've been fiddling with the OS?) and therefore the reason why you ask the question? To see the ARDAgent is installed start the Terminal application - you find the application in the Utilities folder in the Menu go - and type this command:

  system_profiler SPApplicationsDataType | grep ARDAgent

  You can copy and paste the above in the Terminal window. Be patient as this can take some time for the command to run. If successful, you should see something like this:

  /System/Library/CoreServices/RemoteManagement/ARDAgent.app

  Which means that you have the client part of the ARD. Once you have checked this and you have not actually bought the application as described here:

  http://www.Apple.com/UK/RemoteDesktop/

  https://iTunes.Apple.com/GB/app/Apple-Remote-Desktop/id409907375?MT=12

  Then simply start the App Store on your Mac, the App search and buy it.

• Can I order remote control for my 1.5 to PAIN. E TV?

  Hello

  I just want to know how where can I buy / order a remote control for my tv... shop or if it is not possible.
  Is there a cure for all?

  Thanks in advance, in hopes of a solution to this issue...

  As far as I know this product is originally shipped with the remote control.
  Is your defective remote or what?

• can I manage remote NIVLM?

  I've been running NI VLM on my laptop to issue licenses to a mixture of users of LabView and CVI.  Works fine when I'm at the office, not so great when I am traveling, or I turned off the license server, because it takes too much of my CPU resources).    I would like to move this to a 'real' server - but my COMPUTER service don't give me a remote connection to this server.    This would mean that one of them chasing every time that I needed to add/remove a user, etc..., it's why I'm doing this from my laptop.

  VLM yet does Managing remotely?

  Kevin

  Hey Kevin,

  I don't know what you mean by TeleManagement. VLM is on a computer server, then the server machine should be consulted to configure VLM. If this is physically impossible, this will be done via the connection remotely.

  Looks like you would be more useful to use disconnected licenses for your users. Disonnected licenses allow users to access software without pointing to the server Volume License. In this way, you should not run VLM, unless you add your licenses or edition users.

  To put this in:

  1. open VLM and navigate to your users

  2. in VLM 3.0, select users and select cut in the left menu. VLM 2.1.1 right-click the user and select Disconnect.

  3. This will generate a license file that you distribute to your users. Your users will open License Manager on the computers of their clients and go to Options-> license file install and install the disconnected license, that you have given them. They can then take their computers on the network and will not be affected when you stop the MVL or take your machine on the network.

  Please report if you have any other questions. Good luck and have a great day!

  Kind regards

  Jackie

• How can I disable remote assistance windows for a special education program? It's extremely frustrating.

  I'm trying to open a program through my online University so that I can access my courses. Every time I try this, I get a message saying that the internet explore has closed due to support Windows remote. I am currently on Windows Vista. I went into system files of access to turn it off, but he wants me to add a particular file from my computer. I have no idea what it would be. Help!

  It's extremely frustrating.

  Lana

  Follow this link below on how to disable Remote Assistance

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-remote-assistance-frequently-asked-questions

• Can I use remote desktop if I enter address IP but not the name of the computer.

  Why can I do the desktop connection remote with the IP address but the name of the computer? RI

  Hello

  As topic.

  Please share how to fix my IP address is always changed. Thank you!

  Richard!

  Why can I do the desktop connection remote with the IP address but the name of the computer? RI

  Hello

  As topic.

  Please share how to fix my IP address is always changed. Thank you!

  Richard!

  If the computers aren't on the same network and and/or that the network is not along the NetBIOS name - then you will need to use the IP address or some form of dynamic DNS.  The alternative would be to change your HOSTS file so that you can give the name you want and not have to remember the IP address that is now associated with that name in the HOSTS file.

• You can use XP remote assistance to Vista or Windows 7?

  I can give remote assistance from my XP computer to someone under Vista or 7?

  No! and Yes! There are a few compatibility issues, as a break, if breaks Vista XP won't know and voice, there is voice in XP but not Vista. Vista can offer help with XP, but XP cannot offer assistance to Vista. On the Microsoft Downloads you will find much better program called Microsoft Shared View is free. Install you in your computer and your friend installs it in hers. Then you can help each other. Fun and later comes back with a thanks!

• Machine of Windows 7 can not other remote computers using RDP

  Good morning/afternoon everyone.

  I have a strange here with me: I have a computer that is connected to a network, everything from to work properly on this computer except for one small thing, this computer can not remotely a server or a computer using RDP, it is a greeting computer tech and of course, we find a work around to remote servers by using a third-party software , but is a bit strange the fact of not able to RDP.

  The symptoms are this:

  1 RDP opens

  2. we have a server type, then click on "log in".

  3. application Crash and gives error"" application stopped working, close or wait.

  because a windows 7, we can simply remove the service pack and reinstall and looks like the problem is a few months already, reimage the computer is not a solution for the moment.

  Any ideas or help will be appreciated.

  Hey Fabian,.

  Welcome to the Microsoft community.

  Let help you solve the problem.

  Given that the problem is with the Remote Desktop Protocol, it would be better suited by contacting Microsoft TechNet forum, we have a dedicated team with advanced tools and permissions to help you with such questions. Follow the link below to view the same query in the Microsoft TechNet forum for more help on this issue.

  https://TechNet.Microsoft.com/en-us/Windows/bb187457

  If you need help with Windows, let us know and will be happy to help you.

• BlackBerry Z10 how can I backup remotely photos

  With no backup on protect how can I backup photos remotely, so I don't lose if phone lost or stolen when you travel and do not have access to computer

  winfieldZ10 wrote:

  With no backup on protect how can I backup photos remotely, so I don't lose if phone lost or stolen when you travel and do not have access to computer

  You can use something like Dropbox, Box, Onedrive, or any other such cloud storage system, one that I named areall directly accessible using the BB10 devices and use the file manager