measure the speed of the fan in box vibration Simulator

Similar Questions

• I can measure the speed of the NI 9401 fan & cRIO 9075 under Scan Interface?

  Hello

  I am currently using OR 9401 & cRIO 9075 to develop a project, which is to control the CPU fans.

  Since I have to communicate with other instruments by serial port, while I have a NI 9870 module to implement the instrument control.

  I finished the part of control instrument under scan mode and would like to add the function of the fan speed reading.

  Now, I wonder if there is a problem when I choose the Scan Interface to deverlop the program.

  I found the following tutorial, he uses the FPGA interface to impement the acquisition of control and PWM frequency.

  http://www.NI.com/white-paper/3230/en/

  So if the function of the fan control only developed under an FPGA interface, I have to rewrite the control instrument part, seems to be a bit complicated...

  You can use the hybrid mode.

  http://digital.NI.com/public.nsf/allkb/0DB7FEF37C26AF85862575C400531690

• How can I control the speed of the fan on the IX2 - DL

  I'm trying to find where I can adjust or set the speed of the fan on the Lenovo Iomega IX2 - DL.

  I make a copy of the large data, and internal temperatures are higher I would like to see.

  Is there a way to define or to control or adjust the speed of the fan at different temperatures in the box?

  Thank you.

  Snoopy

  Hi snoopypa30,

  There is not a way to change the fan speed manually. The fan turns on when the device has reached a certain temperature. Is your ix2 in a well ventilated area?

• The fan speed does not match cpu temperature

  Hi all

  following my last post, I have a new question. I have a 13 rMBP inches early 2015 2.7 ghz dual core i5.

  by running ' Yes > / dev/null & Yes >/dev/null "(for about 4-5 minutes), I managed to get 100% load on both hearts, beginning of time editing.

  at one point, fans of kick (they were before, 0 RPM, which is normal on the new mbp) and start climbing in RPM also.

  then, cpu temp reached 97 - 98C and the speed of the fans stops about 3250 RPM rise. Temp remains steady at 97 - 98C as if 98C is ok and should not be cooled more far.

  IMHO I'm not sure it's a hardware problem because obviously the temp reading is ok, fans begin to climb in rpm, the only issue is - why they stop at 3250 RPM when the CPU is 98C? (I know about fans of older models, kick to 100% after 90 c, but I wonder if this is the case in the new models or the fault is in my MBP)

  also, it of not like the fans are completely disabled or works 100% all the time, looks like a problem of software for me.

  If someone has the same model of rMBP I would appreciate running the ' Yes > / dev/null & Yes >/dev/null ' and sharing the results.

  p. s.

  resetting the SMC has not changed anything

  diagnosis of Apple was ok

  diagnosis more advanced on apple store was ok

  performance of the mbp is quite normal than

  TopsyKretts wrote:

  IMHO I'm not sure it's a hardware problem because obviously the temp reading is ok, fans begin to climb in rpm, the only issue is - why they stop at 3250 RPM when the CPU is 98C? (I know about fans of older models, kick to 100% after 90 c, but I wonder if this is the case in the new models or the fault is in my MBP)

  also, it of not like the fans are completely disabled or works 100% all the time, looks like a problem of software for me.

  resetting the SMC has not changed anything

  diagnosis of Apple was ok

  diagnosis more advanced on apple store was ok

  performance of the mbp is quite normal than

  What else don't want to if he withdrew it at the Apple store?  Take again if you are not satisfied

  Genius of booking http://www.apple.com/retail/geniusbar/

  Online https://getsupport.apple.com/GetproductgroupList.action

  check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do

  .

  My early 2015 MacBook Pro fans are at 0 RPM and the temperature of my cpu never fluctuates

• New version, want to come back to the previous download box, a new has no history and does not show the speed of download, how to get back?

  They are in the question. I was very happy with the old download box, I have a mac, so when I got the new update of firefox, I was very surprised to see I cannot look through old downloads and can not see the speed in which the file is downloaded, it is not sensible cut options off...

  Note that Firefox 20 can also open the topic: downloads page in a tab (see also about: on).

  You can set the Boolean pref browser.download.useToolkitUI true on the topic: config page to restore the old Download Manager window.

  • http://KB.mozillazine.org/about:config

• How to regulate the speed of the fan on Satellite Pro L650 - 15 c?

  I can regulate the speed of the fan in my laptop (Satellite Pro L650 - 15 c)?

  The reinstallation of Windows 7 the fan is always moving up. How can I set this fan?

  greeting of the developing countries

  Hello

  Open windows power management and settings for the management of the power supply you use. You will find the advanced power option. Open it and you will find Toshiba power saver options.

  Open all the available option and check the settings of the cooling method. Set to optimized battery option.
  This should reduce the speed of the cooling fan.

  Please test and validate the results.

• the fan runs full speed at the beginning upward

  HP Pavilion p6-2037cb bought 19/01/12.  Windows 7.  There is no error message.

  When I turn on the computer after it has stopped all night the fan running at full speed.  This has happened several times in the first month.  The first time, he stopped himself after a few minutes.  Then I learned to stop it by restarting the computer simply.  It still works, but what was once happen one or two times a month, happened twice in two days then you worry I the problem worsens.

  It never happens when I use the computer because I don't do anything that requires a lot of cpu or causes a warm-up.  I just surf the web and send e-mail.  No games or videos or TV.

  If it's a problem of connection fan I would like to know the nearest repair service.  I would rather that ship it.  But I can't find a list of authorized warranty repair service center.  I followed the links on HP Support Assistant but got sent to a site that does not list the pavilions.

  I need to know why the fan runs full speed at first upward and where to repair close to where I live.

  Hello mpw101,

  It seems that there is some confusion about the products of your receipt and how he explained. I have passed your thread to appropriate to review team. Someone must be in contact with you shortly so that you can discuss your experience of HP customer care.

• How do I change the speed of the fan on MacBook Pro

  I have a mid of 2012 13 "MacBook Pro with a 2.5 GHz and 16 GB 1600 MHz DDR3 i5 processor, I want to change the fan speed so he can run cooler, any suggestions?"

  Install an application like SMC fan control

  https://github.com/hholtmann/smcFanControl

  or Macs fan control

  http://www.CrystalIDEA.com/Macs-fan-control

• Satellite C660D - software to control the fan speed?

  Just brought a C660D. Someone knows the software to control the fan speed?

  My laptop CPU fan always turns to 74-80% of max speed. That's a lot of noise. I tried cpucool, but it did not work.

  If does not work, the fan speed will remain at the temperature of 0 with cpu at 38 oC. But with any operation tiny, like the click of the mouse, it will change again to 74%, CPU temperature does not change.

  Hi Polaralbatross,

  Have you ever tried the Eco mode that uses the cooling battery optimized method?

• Satellite Pro U300 PSU31E - two how to adjust the fan speed

  While using the laptop the fan comes in for a few seconds and then stops again, which causes the temperature
  increase... what makes the fan?
  Throttle upward rather than stay in a slow to medium status.

  I'm running Vista Business, but I did ' t find the parameters in this regard.

  In the ACPI BIOS is not accessible, but as already posted my problem looks a bit like this:

  Re: ACPI fan on Satellite L30
  Posted the: 13-Sep-2007 22:08 reply

  The fan goes in cycles like this:
  ------------------
  Less than 50, fan
  When > 55, fan to full
  When< 55,="" fan="" on="">
  When< 50,="" fan="" off="">
  and it continues

  ------------------

  It would be much better than when he went to more than 50 years she just spend on bass, then
  It would never reach 55 and never go up.
  And the laptop would be 100 x more silent.

  Another thing: the Germany from Toshiba support page won't load at all or is the global page
  very slow, using different locations and conections. That I can not retrieve all the information to help me.
  And I do not think the University backbone or my DSL 6 Mbps at home is the problem

  Hello

  The fans begin to turn only if a certain temperature point has been reached.
  These fan table information is stored in the BIOS and cannot be changed.

  Some computers laptops satellite supports an additional option in the Toshiba HWSetup. It allows to change the CPU dynamically switchable or always low frequency mode.
  This would set the temperature to a lower level and the fans would lead occasionally.

  In any case, to my knowledge, this option is not available in the Toshiba HWSetup and not in the BIOS so I guess that it s not possible to control fan behavior.

  By the way; If you wish, you can test a tool like aSpeedFanfreeware.
  This program can control the speed of the fans according to the temperatures of the system.
  Maybe it will work on your Satellite Pro U300

  Good bye

• Tecra A11 speed on the fan at 100% all the time

  Hi, one of my colleagues has a new notebook Tecra A11. I've recently updated the bios to version 2.60 and since then the fan is constantly at full speed. Before the update it would be noticeable when the laptop has been widely used, but would slow down when idle. Anyone else seen/had this problem? I wouldn't mind flashing back to the old bios but can not see available on the web site of tosh.

  Thank you

  Hello

  In your case, I recommend setting the BIOS to the default value.
  You can do it in the BIOS. Insofar as I'm sure you could get press F9 default.
  But the option is mentioned in BIOS to verify this.

  In addition, I recommend changing the CPU and cooling module in Windows Power Options.

  This should help to reduce the speed of the cooling fan.

• How can Qosmio G30-126 - I check the fan speed?

  MODEL: G30 - 126
  OS: VISTA 32-BIT SP2

  How to know the speed of the fan? I have try several programs like "sensor hw monitor" & "fan speed" but it's not watch everything think about the temperature of the CPU just fan speed.

  Where is the problem and what I need to do?

  Hmm... Why you want to know the speed of the fan?

  The fan speed will be automatically controlled and you can t change this or manually control. You can change the method of cooling between performance and battery optimized in Vista power management. Did you check that?

  In addition, you can clean the laptop using a jet of compressed air as Akuma written. This could blow out the dust from the cooling fans.

• Satego X 200 crashes on a second if the fan allows you to change the speed

  Hello people,
  my laptop hangs on a second if the fan changes speed. This happens not so often and that since little time.
  Excuse me for my English.

  Thanks in advance

  Laptop freezes for a second? Have you really noticed this? ;)
  I mean a s, it's really a short time and usually something like this shouldn't be noticeable.
  In any case I assume that him hangs for a while (1 sec :)) because the CPU is busy because of some applications and processes that are taking place in the background.

  Sometimes this happens to me also it s nothing unusual

• Is satellite A500-1DN - possible to adjust the fan speed?

  Is it possible to adjust the speed of the fan of this laptop? As I saw in PC Health monitor the fan speed is mainly of 0%, and sometimes it amounts to 70% (on idling) and quite large making noise.
  I wish to address is it permanently on.

  Is this possible?

  Hello

  > Is it possible to adjust the speed of the fan of this laptop? As I saw in PC Health monitor the fan speed is mainly of 0%, and sometimes it amounts to 70% (on idling) and make a big enough noise

  I agree with you, I also own a500-1dn and it makes big noise even while surfing Internet. This forum was suggested to update Bios to reduce the fan noise.

• Satellite A100 - the fan runs at high speed after idle standby

  Hello

  My laptop is Satellite A100-912.

  The problem is when I suspend it for more the a few minutes when the fan is running at high speed. This occurs on both Windows XP and Linux GNU. When the temperature of the two nuclei will more then 51 degrees C fan slows down and begins to work as expected. Suspended for a short time (about a minute or two) the fan speed is OK.

  I've updated to the latest version of the BIOS.

  Hello

  What version of BIOS you have installed? Has recently been the machine in for repair? A few interesting facts where I need some information to help you...
  By the way: is your machine still in warranty?

  Welcome them