Media Center problem

Similar Questions

• Satellite P - Windows Media Center problem

  Without any visible problems or bug virus threats, Windows Media Center starts to crack on video output.

  Just randomly losing pixels on a screen and all other similar programs like wmp, vlc media player, mv2, and Intervideo Win DVD works properly?

  Hello!

  You have installed any Service Packs or patches for your operating system?
  Check on the Microsoft update Web site.

  I think that your assignment isn't really clear. Can you please explain this exactly?

  Good bye

• Media center problem with Qosmio G35-650 - error message

  Hi all

  I have a problem with media center on qosmio g35-650.
  When starting live TV, an error message is displayed and written "enforcement failed Please restart your computer again. If the problem persists contact again with your hardware support"
  It worked yesterday and today, something happened.
  Also, there is no tv signal available. Is this a hardware problem?

  concerning

  CEM mete

  Hello

  It's not easy to tell if it s a hardware or software problem.
  You can check for certain shortcomings Device Manager.
  If there is no yellow exclamation mark then I recommend reinstall the driver first.

  But on the question: did you run the MCE?
  In such cases, you can try to restore the operating system to the beginning.

• Receiving Service of media Center problem

  "Media Center Receiver Service has encountered a problem and needs to close" continues to appear about every 15 seconds. I tried the system restore, but he only gave me a date yesterday. Error report said C:\DOCUME 1\DANIEL 1\LOCALS 1\Temp\WER5e52.dir00\ehrecvt.exe.mdmp

  dannymc52,
  Thanks for posting on the Microsoft answers Forum.  We can use a little more information to help with your problem.  Please let us know the following information:
  What is your operating system and service pack level?
  Had you installed software or updates when this problem started?

  Here are a few things you can try.
  Try starting minimum of your system to determine if certain installed software is causing the problem or not.  Here are instructions on how to perform a clean boot: http://support.microsoft.com/default.aspx/kb/310353

  Here's a post from MSDN with a tool that can help: http://blogs.msdn.com/peterrosser/archive/2005/10/21/483723.aspx

  Tell us the requested information and the results of the suggested actions. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• window media center problem

  I can't do all window media center to work.

  Hello

   
  Method 1:  Open the program by clicking on start > all programs > Media Center. If you are able to open the application from here then the shortcut could have corrupted and you may need to create a new shortcut icon.
  Follow the link below:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-or-delete-a-shortcut
   
  Method 2:
  You can run an auditor of the system files on your computer. This will replace the corrupted in your operating system files.
  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:
  Open an elevated command prompt. To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  Type the following command and press ENTER: sfc/scannow
  The sfc/scannow command. analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
  http://support.Microsoft.com/kb/929833
  Try these steps and let us know the result.

• Media Center problem - no TV Signal then Service unavailable

  I use WMC to record programs (it is not attached to a TV). Often programs will not register. WMC history will say: ' NO REGISTERED: NO TV SIGNAL. If a program starts recording, it records always completely and without problems. The error occurs only at the beginning of the recording.

  I think that the problem lies in the length of the IR blaster to change the channel. After changing channels with WMC, it takes about 11 seconds for the channel is displayed on the WMC window. About 5 seconds the WMC window still no TV Signal. Then it's a race. If the "Service unavailable" error because then a second registration fails. If the TV picture appears first, it records very well.  Even if it fails with the error "Service not available", you can go choose the guide it a few seconds later, and it records very well. I'm hoping that there is a registry setting that could make WMC wait 15 to 20 seconds before calling the "Service unavailable". Or maybe a way to completely prevent the "Service unavailable" error check to run and force it to save anyway? Any other ideas?

  Other relevant:

  Windows 7 Edition Home Premium x 64
  i5 CPU @3. 71 GHz, 12 GB of RAM

  Series of Radeon HD5700 GPU (it is a crappy card. He made it past problems with photoshop. Even with WMC I have always maxmize the window WMC before poster TV signal. My first and last AMD card.)

  Hauppauge HD PVR (a single tuner) connected to a Dish Network VIP211K box

  Hauppauge, software and drivers are up to date. Windows 7 is up to date.

  For a few years I had been successfully using WinTV because I couldn't read my dish channels in WMC. I have recently reinstalled Windows 7 and Media Center has finally acknowledged the dish channels. I wouldn't go back for the WinTV barebones. But if WMC remains unreliable, I'll have to.

  chk these links

  Error message when you open Windows Media Center TV Pack and tune in to a channel that is listed in the electronic Program Guide: "TV Signal No."

  http://support.Microsoft.com/kb/955485/en-us

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_programs/Windows-Media-Center-wont-play-online-content/cf972b04-BECE-407E-bb38-ecc4c945cf42

  relevant for windows 7

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

• Windows Media Center problem

  I have ths same issues as the other 3 people. The first time I tried to use Windows Media Center it sabotaged several of my office and of programs on the start menu icons. Now, whenever I try to use these programs, the Media center load. I tried everything I know to do without success.

  Hello Aquarius_500,

  1 are all the icons on your computer turned into Media center or just opens with Media Center?

  I suggest that you try the methods below to resolve this issue.

  Method 1:

  It seems to me that file on your computer is corrupted. You can try to do a restore of the system on your computer when it was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can check the link for more information below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  Method 2:

  You can try to manually change the file association. Here is a link you can follow and which will give you information about this:

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default

  Method 3:

  Try to create a new user account and check if you have the same problem. This can be caused by a corrupted user profile.

  To create a new user profile, follow these steps:

  Note: To create a new profile, you must first create a new user account. When the account is created, a profile will also be created.

  a. open user accounts by clicking the Start button, clicking Control Panel, clicking user accounts and parental controls, and then clicking user accounts.

  b. click on manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. click on create a new account.

  d. type the name you want to assign to the user account, click an account type, and then click on create an account.

  Note: Do not give the username for the user account.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Media Center problem because it does not change the channel

  I recently changed my dish satellite Direct who changed the channel to 3 4.  My Media Center on my desk, I cannot change just the channel without going through the entire installation, which also requires a configuration for "Câble IR" which, for some reason, it does not.  Therefore, the only option I have given is 'back' or 'Cancel '.  'Back' has no effect except to find the IR cable, in vain.  'Cancel' I shot with no changes!  I'm stuck.  All I want to do is change the channel to receive the TV signal.  Help, please.

  Thank you, Ernest Smith

  Sorry, stupid.  All I had to do was change the channel with the remote control.

• Windows Media Center problem of input S-video

  I have a HP m9350f running Vista 64-bit Home Premium.  It has a Hauppauge HVR-1800 TV tuner inside.  This card features a remote control with IR receiver is highlighted at the front of the minitower chassis.  The tuner and remote work fine through WMC with a 'digital antenna "as the source of signal to the card.

  However, I'm trying to set up WMC also accept a S-video (or composite video) and audio of a combo Samsung DVD/VCR, VR-357.  WMC hesitate to second source because it can't find/see "IR control cable" on the remote control, so I can never finish the implementation.

  I've seen some old posts that address this problem, but nothing that seems to apply to the HVR-1800.  What is someone is aware of all hotfixes to WMC or some other workaround for this stumbling block "IR control cable"?

  The VR-357 has no RF output, so I can not simply designate as an "analog" with just the Ch antenna 3/4.  My next step is to go buy an old VCR to get Ch 3/4 output and this source from the TV card as an analog antenna, but that seems to be crazy having something to do with all this modern equipment!

  Thanks in advance to anyone who has nothing to offer.

  Hello

  See this link:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-pictures/how-to-display-AV-line-input-in-Windows-Media/2021f72a-4daf-4e69-A8CA-efaf0743d076

• No Netflix / Internet TV in Media Center

  Original title: Media center problems

  Microsoft has found how to fix Media center losing even Netflix and internet TV? I tried everything I found on the web but no luck so that they return again.

  Barb, finally got it work. Used start/wait %windir%\ehome\mcupdate.exe - u-nogc, then the icons appeared. Had to remove Internet TV and Netflix in Add and remove programs and then reinstall both to get pass the phase of installation for them. Everything seems to work now. Hope this helps someone else.

• Media Center Download correct the channels but totally wrong listing of programs.

  Implementation guide for Media Center on Windows 7 64 bit system. I get the right lanes, but there is no correlation between the programs and the actual programs. Can't trust record because the listed show may be a different length of time as the real.

  Please repost this in
  http://social.answers.Microsoft.com/forums/en-us/mediacenter/threads and start a
  new thread.
   
  You must include your zip code, your provider, the type of tuner you have and
  If you have a top of the page box set or cable card or?
   
  Check your time, the date, the zone settings.
   
  And please see if ads on zap2it.com are the sane as you see inside
  Media Center.
   
  Friday, October 29, 2010, 01:48:59 + 0000, ALs Media Center problem says:
   
  > Configuration guide for Media Center on Windows 7 64 bit system. I get the right lanes, but there is no correlation between the programs and the actual programs. Can't trust record because the listed show may be a different length of time as the real.
   

  Barb Bowman

  http://www.digitalmediaphile.com

• My Media Center is still broken. The notice of recovery, I have to fix was less useless.

  I followed all the instructions given to me to attempt a repair of ehRec.exe. These instructions took the time to follow, but in the end, destroyed my software Windows completely. I have re-installed Windows from the installation disc (which did not include a codec MPEG2.) I got the ffdshow codec, kind of works. However, even after a reinstall complete ehRec.exe is always (occasional) broken, that my media center crashes more than half the time, I try to use it, and almost always regular for registration fails. Is it possible that maybe some Microsoft fix caused the problem? I know by looking at other forums that I am not the only unhappy camper in Media Center.

  I am very pleased with the notice I received. The instructions regarding the use of sfc were simply wrong and the instructions on how to fix my problem were probably just fake too. For example, I don't think you can do a repair installation, unless you have an up-to-date installation CD 100%. Certainly, that didn't in my case and left the system in a State that won't start plu. I start to wonder if your procedures have been tested on real systems with older installation CD and upgrades and random failures since the initial installation.

  On another thread, kkwriter (a user, no Microsoft technical support) gave me an answer to this problem:

  Media center and client .net 4 are not compatible. Remove .net 4 and the media center problems disappear. (Ignore the warning that some programs may break if you remove .net 4 when uninstall you.) Some might, but none that I use.)

  There are probably a lot of people with the media center problem. It's too bad Microsoft does one.

• Media Center has stopped to get tv signal

  Original title: units media center problem

  using vista and media center has stopped to get tv signal. I checked the Internet is good, but the Player cannot find a server

  Discussions were merged.

  Deleted duplicate.

  Hello

  See if that helps you.

  Do a system restore to before that the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  See you soon.

• Netflix has stopped playing in Windows Media Center

  Until today, I had no content streaming watch Netflix on Windows Media Center problem (in Vista Home Premium). But now he stops "Netflix" red, one where content/license/buffering information are usually displayed on-screen. It is also very slow to get to this point. The site Web of Netflix movie player works fine, but not by the Media Center. Any help appreciated and thank you

  Here's what worked for me.

  1 close Media Center
  2 click on the start menu, choose run and type cmd
  3 run the command regsvr32.exe atl.dll
  4 run the command C:\WINDOWS\eHome\ehSched /unregServer
  5. run the command/service C:\WINDOWS\eHome\ehSched
  6 run the command C:\WINDOWS\eHome\ehRecvr /unregServer
  7. run the command/service C:\WINDOWS\eHome\ehRecvr
  8 run the command C:\WINDOWS\eHome\ehRec.exe /unregServer
  9. run the command C:\WINDOWS\eHome\ehRec.exe/regserver
  10. run the command C:\WINDOWS\eHome\ehmsas.exe /unregServer
  11. run the command C:\WINDOWS\eHome\ehmsas.exe/regserver
  12 reboot Vista
  13 restart Media Center

  From:
  http://social.answers.Microsoft.com/forums/en-us/vistamedia/thread/f05f69c7-6456-4117-B302-27c08886ea1e

• Computer crashes whenever I try to access Windows Media Center

  Original title: windows media center problems

  my computer freezes whenever I have attempt to access windows media Center and I can play downloaded vids

  Hi atthire,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  4. what type of video files you try to play?

  Step 1:

  This problem occurs if the Windows Media Center update process (Mcupdate.exe) cannot access the Windows Media Center data store. You may experience this problem if the data store is corrupted. So, try to rebuild the Media Center data store. To do this, follow these steps:

  a. exit Windows Media Center.

  b. remove the mediaCenterDataStore.db file. By default, this file is located in the following location:

  %SystemDrive%\ProgramData\Microsoft\eHome\mediaCenterDataStore.DB

  c. Click Start, run type, and then click Run.

  (d) in the Open box, type % systemdrive%\programdata\microsoft\ehome, and then click OK.

  e. in the details, click pane right mediacenterdatastore.db and then click on remove.

  f. click Yes to confirm that you want to move the Mediacenterdatastore.db file to the trash.

  g. launch Windows Media Center and check if the problem persists.

  Step 2:

  You try to run a SFC scan to find and fix missing or corrupt system files.

  You can read the following article to launch the SFC scan:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.