Meeting scheduled for the TMS OBTP disconnect active calls

Similar Questions

• Purge schedule on the TMS/TMSXE

  TMS is 14.3.0

  TMSXE is 3.1.2

  We gave up on the recording of our telepresence on the CUCM, we work to keep away them from the CUCM and their inclusion in the VCS - C (see here). But when you remove the CUCM non-registrant endpoints off the TMS and add it as registered endpoint C - VCS, TMS causing problems on all scheduled meetings.

  After the now the rebinding VCS - C saved telepresence endpoints for room calendar changes in the TMSXE, it

  1. Add the 'new' (actually modified) end for the calendar of meetings
  2. maintains endpoint (previously saved CUCM) former listed as a "shadow" unknown endpoint
  3. clear the multipoint resource MCU/TP server allocated meeting
  4. send an email to the host of the meeting, saying: "information your administrator is migrating to a new system of conferencing reservations." During the migration, your conference was made. Cautions due to limited resources of routing, automatic routing could not be set up for your conference. A participant dial-in/out external added to the call is not connected. To ensure that the Conference will connect and the delivery of resources are available, contact your administrator to videoconferencing. Road is not valid.

  But all meetings are internal, and there are many resources available on the telepresence Server

  I wonder if there is a way to solve this problem and what we should do. Is there a way to purge all the TMS meetings so that the TMSXE re - synchronize all the information meeting of the TMSXE.

  Hello

  There is unfortunately no history of migration in TMS between a CUCM-centric and a deployment centered on VCS. If you make a change like that, you essentially need to manually update all future bookings.

  Kind regards

  Kjetil

• SQL Server for the TMS

  Hello

  We install TMS v15 and we will use external SQL. What communication ports, protocols, and services that are required for communication between the server SQL and MSDS?

  Thank you

  LAN

  Hello

  As directed by installation of TMS external help SQL server guide, requirement of network latency between the Cisco TMS server and SQL server should not exceed 20 ms.

  For the ports used by TMS refer to this guide on page 13.

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/infrastructure/TMS/Install_Guide/Cisco-TMS-install-guide-14-6.PDF

  For connections SQL, the TCP port used by an instance SQL server by default is configurable, and the port used by a named instance of SQL server is dynamic, changing whenever the service restarts.

  For instructions on taking your SQL server server to listen on a particular port:

  https://TechNet.Microsoft.com/en-us/library/ms177440.aspx

  Kind regards

  Acevirgil

• Is this declaration for the creation of correct active standby pair?

  Hi, I have two servers, one is "baal" and the other is "diablo".
  I want to create a pair of active standby with the RETURN of TWOSAFE and disable the BACK after that 5 times timeout happens and resume BACK if less than 8 ms recognize.
  I do not sure if 8 ms is reasonable if the starting node is far behind the active node (assuming the starting node is to hardware failure).
  Here's my response:
  --------------------------------
  PAIR of EVE ACTIVE CREATE eppdb WE "baal", eppdb ON "diablo."
  RETURN TWOSAFE
  STORE eppdb WE 'baal '.
  DISABLE THE BACK EVERY 5
  CURRICULUM VITAE OF RETURN 8;
  -------------------------------
  Is what I'm not clear on the key word "STORE."
  I noticed that there are a lot of 'STORE' after RETURN of TWOSAFE and make that confused me for a while.
  If this assertion is false, please correct me.
  
  Thank you.

  In fact, these options apply to the store level so that the statement is as follows:

  CREATE A PAIR OF ACTIVE STANDBY
  eppdb WE 'baal', eppdb ON TWOSAFE of RETURN "diablo."
  STORE eppdb WE 'baal '.
  DISABLE THE RETURN ALL 5 HP BACK 20
  RETURN SERVICES TURNED OFF WHEN THEY ARE ARRESTED
  SUSTAINABLE COMMITMENT ON
  COMMIT LOCAL ACTION VALIDATION
  WAIT BACK 30 TIMES
  STORE eppdb ON "diablo."
  DISABLE THE RETURN ALL 5 HP BACK 20
  RETURN SERVICES TURNED OFF WHEN THEY ARE ARRESTED
  SUSTAINABLE COMMITMENT ON
  COMMIT LOCAL ACTION VALIDATION
  WAIT BACK 30 TIMES;

  All these options and what they mean are described in detail in the (very good) documentation. I would recommend that you read in order to understand that you configure here... Just a summary.

  Whenever the wait isn't available, application commits will experience timeouts (TT WARNING 8170). Request code must be prepared to receive and respond to this warning. Finally (according to the options DISABLE RETURN and RETURN WAIT [see below]) TT come back asynchronously and wait times stops. Once sleep is available and the stores are back in sync TT will increase from TWOSAFE BACK mode once again.

  DISABLE BACK every 5 - turn off the twosafe return (i.e. emergency in asynchronous mode) treatment after 5 consecutive times (each timeout will be 30 seconds)

  BACK to the TIME of WAITING 30 - wait up to 30 seconds (a very long time) for recognition in return for service to the peer

  The combination of these two parameters means that in the event of network failure or the eve past active offline will be waiting for about 150 seconds (5 x 3) before disabling the twosafe return processing. During this time of transaction request will be and experience timeouts. I would suggest smaller values such as 2 and 10 maybe but only t = OU can decide what is reasonable for your environment.

  SUSTAINABLE if ENGAGING ON - whenever the return services are then disabled, force all commits to be sustainable (synchronous disk). This will degrade performance, but provides continuous data protection when the instance of relief is not available. If you don't want this feature so do not configure (but then when the watch is not available you are exposed to data loss if the assets fails).

  RETURN SERVICES OFF when THEY are ARRESTED - disable services return (spend in asynchronous mode) each time the replication agent stops.

  LOCAL validation ACTION COMMIT - if a validation Gets a time-out warning (TT8170) then the transaction status is uncertain. The application can choose to engage locally (allowing it to continue the treatment), in which case the txn is committed. will be added to the queue of replication for a (possible) retransmission in asynchronous mode. It is the recommended behavior and is defined by this option. The other option is NO ACTION, which is also the default value. With this option, the application must implement the logic for its own decision, and then call a few specific TT builtin functions to decide how to deal with the uncertain state. This adds significant complexity. Until the application makes a decision, it is impossible to continue.

  See the documentation for more information.

• Solution of scheduling for the ADF

  I am building an ADF application and I want to have the ability to process some processes running longer such as reports of treatment by lots, ETL, imports and exports of batch processing. If people are familiar with the e-Business Suite I think of something as Manager of the competitor.
  
  I know I can develop something in comics, for example db programmer but I would like to put something in the ADF. Is there a solution for this?
  
  see you soon
  James

  James,
  There are solutions, i.e. the quartz or the WLS TimerManager. Both offer capabilities of Task Scheduler like cron (which means that you can and intervals or once jobs). I use quartz because we have developed or first planner under OAS and quartz looked like the best solution. I'vs played a bit with the TimerManager which is part of WLS (at least 10.3.x).
  There is a good small sample for the TimerManager of Edwin Biemont (http://biemond.blogspot.com/2009/09/job-scheduling-in-weblogic.html).

  A note of warning: If you use the Scheduler and the adf link layer and we need to create an application root module in a scheduled task, it breaks the link layer. I have a SR pending on this issue. The only solution I know is to keep the Planner in a different application without a user interface.

  Timo

• Security for the family shows no activity

  Original title: parental control

  my account has shown no activity for weeks. I have a son in the communications group, and he has problems. I need to listen to what he's up to. I put my computer up and has no activity too. That's happened?

  Hello

  Thanks for posting your query on the Microsoft Communities.

  I'm sorry to know that stopped parental control monitoring activities.

  First of all, let us refresh parental filter and check the result.

  How to update the family safety filter?

  http://Windows.Microsoft.com/en-us/Windows-Live/Family-Safety-filter-FAQ

  If that does not help, click on the link and go to the "General troubleshooting" section > A, B and C of the section.

  http://answers.Microsoft.com/en-us/Windows/wiki/windows_other-security/family-safety-frequently-asked-questions/5672f7b2-e3c0-498a-9a6c-c9cab39f68e5

  Let us know the result. If you have any other questions, we will be happy to help you.

• CCC for the TMS Cisco keyboard shortcuts

  Hello

  I believe that he aren´t of the hotkeys in TMS at all, but perhaps it shortcuts are undocumented.

  Conference center of control, it would be usful for some events to use hotkeys to turn Audio or change floor etc...

  It is possible without using the mouse, or it is planned to be implemented in the future?

  Kind regards

  Thomas

  Hi Thomas,

  There is no keyboard shortcut for TMS CCC. You can use it via the mouse and no keyboard shortcuts.

  I don't think it is planned to Cisco on the keyboard shortcuts.

  Thank you

  Saurabh

• My Flash Player is active for the administrator, but not active for two other users on my computer. How to solve this problem?

  The system is Windows 10.

  Flash Player is not active for two other users using Internet explore and Microsoft Edge.

  Configuration in Internet Explorer

  -Shockwave Flash Object activated

  -ActiveX active filtering

  Edge configuration

  -L' use of Adobe Flash Player is on

  Hello

  We are aware of this issue and are working with Microsoft to resolve the issue.

  --

  Maria

• EliteBook 8407p: looking for information on battery (non-scheduled) for the Elitebook 8470p

  I just bought a rebrubished Elitebook 8570p and I am trying to find out the battery that attaches to the bottom of the laptop

  I speak not of the ordinary battery which sldes in the back, but the much larger battery that attaches to the bottom via a special plug.

  Does anyone have information on these batteries?

  I've exhausted my search keywords Google ideas.

  Has the battery never existed?

  Here's a market secondary one for about $100:

  http://www.serversupply.com/products/part_search/pid_lookup.asp?pid=154418 & gclid = CjwKEAjwka67BRCk6a7_h_7Pui8SJABcMkWR73YkvnylQSnmTHu3um8-q7yT99PxM6B5jchJAfSpDhoCo2Pw_wcB

  Although he has no part number for this in the manual of the little post in the middle is compatible with the battery connector indicated in the manual. Looks like that may also still be for sale through HP Australia:

  http://h20386.www2.HP.com/AustraliaStore/merch/product.aspx?ID=QK640AA & opt = & salt = ACC

  Sometimes called a 'slice' of battery and they add a little weight to the laptop but they are equivalent to the addition of 2 + additional standard batteries have so huge to execution.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Double click on the photo (my photo) causes PC freeze with message "not responding" (scheduled for the windows fax and picture viewer)

  WINDOWS XP

  "This program is not responding...". »

  I then have to click on the right upper window X two times to close the window. When it closes Finally, everything on the desktop disappears for about 3 seconds then reappears as if the PC restarted, but it does not actually restart.

  My images, the other day, all open without this feeze/final issue. I don't have these problems when you use Windows XP Paint, Jasc Paint Shop, or Quicktime to open images, once set by default... Just does not work with Windows Picture and Fax Viewer more and all my photos are already defined (default) to open with Windows Picture and Fax Viewer - clicking Properties confirms this.

  Also, if I right click on the individual image to 'open with' and manually choose 'open with' Windows Picture and Fax Viewer, it will then open and I can scroll all the following pictures an image in Windows Picture and Fax Viewer. "But I can't just click on an individual picture, otherwise, it will freeze just straight up.  Difficulty It Center Microsoft could not automatically repair because the shimgvw.dll file already exists.

  I used to always use Windows Picture and Fax Viewer with no such problems. I have not the slightest idea what happened... even though I was messing around with 1) Component Services > Security Com > permissions & launch Activate and Run permissions) 2 > Regedit > Edit > "Permissions" last week and changed "Registered Owner" in HKEY LOCAL MACHINE and some other stuff like that. Could permissions and changing names have caused this unexpected problem in Windows Picture and Fax Viewer? If so, the changes I made will not be changed back, then how can I fix a broken Windows Picture and Fax Viewer?  And if these changes, last week, have nothing to do with this "opening images in the image Windows and Fax Viewer problem,' so what?

  I did your suggestion before posting here. I saw the same solution as your addition, the interpreter, but it does not solve the problem because I already had the shimgvw.dll etc. in their proper place and my photos/images were not always open with Windows Picture and Fax Viewer the way I wanted them to open.

  Since I got my photos all open as I wanted (as before) this way to use Windows Picture and Fax viewer:

  Control Panel > Folder Options > File Types: I changed then each file/folder associated with 'images' to open with Windows Picture and Fax Viewer. I determined this by reading the details for each extension / the item highlighted. If the referenced details 'images', I then clicked on change and choose Windows Picture and Fax Viewer to open the extension.

  I went through everything everyone who was not obvious that they are. I made a change: BMP, GIF, EMF, JFIF, JPE, JPEG, etc... I changed at least 12 (more than I thought it was).

  Immediately after changing all of these types of files, I rebooted and Windows Picture and Fax Viewer was still working the way I wanted to (as before).

• Windows 7 scheduled for the single folder backup

  Hello

  I have windows 7 laptop. In my laptop take a single folder to another regular in backup.how location is saved in a single folder as a scheduled backup. I don't want a whole disc as these backup (disk C or D or E). I want only the single file. Send me answer as soon as possible.
  Thank you
  Audi

  Open the backup and restore , and then run the wizard. If you go the the computer > C: path of reader you can select an individual file or multiple of the folders to back up. See the screen shot...

  http://CID-25ab668da65c8fbe.photos.live.com/self.aspx/Windows%20images/BackupSelectFolders.PNG

• Schedule for the opening of the application on Tungsten E Palm.Exe error

  I have a Tungsten E (no disc of original material) which was working fine until yesterday. I can't open my calendar, even though I can open all the rest and receive an application Palm.Exe error. "The Exception integer division by zero".

  "(Oxc0000094) occurred in the application at location Ox67cz6F22. When I try to send the error message, it freezes all the Palm application. -Without the installation discs original can I do? Delete the files from my hard drive (and if so, which ones) and then re - sync? Instructions are appreciated.

  Click on the following link to the support page for your device on the kb.palm.com Web page.
  http://www.Palm.com/us/support/TUNGSTENE/

  There are links on the page the user Troubleshooting Guide, how to, downloads, etc.

  There is a link on this page for Palm desktop that you can download.

  Here are the instructions for XP to uninstall "own."

  You should first make a copy of your data to have just in case something
  is happening. You can find your data files by going to C:\Program Files\Palm or
  A Palm. Highlight your Palm Desktop user name and right click and copy.
  Then, go to the desktop of your PC, right-click on a blank spot block and select.

  Now you want to uninstall Palm Desktop and remove anything that has to do
  with Palm Desktop on your computer. As the folder above, remove the Palm folder. Once this is done, you need to delete some registry keys
  your registry PC operating system.

  Word of warning, go here and removing the wrong thing can cause your PC
  No start, crashing and deleting programs and data. If you feel
  you're not sure of yourself, see if you have a friend who can help you or a
  PC technician that you can pay to help you. This will show them all
  Should be deleted. To keep your current registry settings, we have a backup of the registry.

  On the PC, go to start and run Type "regedit" without the quotes

  Select WORKSTATION, browse to the file--> export. Should appear with a save as
  box. Current place of residence is very well should be in My Documents, or you can change in a location that you will remember. In the file name box, type "Regbackup [todaysdate]" i.e. Regbackup07072008. Then, the most difficult part.

  The best way to ensure that your work with the right key, select the key that is installation quick palm and press delete on your keyboard. It will ask you, are
  make sure you. Say Yes. Do the same for all the keys below.

  If you make a mistake, stop what you are doing. And call a PC technician.
  BUT do not turn off your computer.

  The reg keys are as follows (Note: some of the theses reg keys won't be here)
  But if they remove them)

  * Installation quick HKEY_CURRENT_USER\Software\U.S. Robotics\Palm
  * Transfer of files Robotics\PalmOne HKEY_CURRENT_USER\Software\U.S.
  * Robotics\Pilot Office of HKEY_CURRENT_USER\Software\U.S.
  * HKEY_CURRENT_USER\Software\Palm
  * HKEY_CURRENT_USER\Software\Palm, Inc.
  * HKEY_CURRENT_USER\Software\PalmDesktopAutorun
  * HKEY_CURRENT_USER\Software\palmOne
  * HKEY_CURRENT_USER\Software\PalmSource
  * HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm

  Then restart your computer

  Then, reinstall your Palm desktop from the CD and do a hotsync. If she asks
  for a user name and you synchronized your device before you put "test" If you "
  no sync before create you a hotsync name.

  Message relates to: Palm i705

• schedule meetings with the TMS and CTManager on the same endpoint

  Hello everyone

  I explain my problem, we have a CUCM with CTManager to plan meetings of the CTS, we have 2 VCS with a TMS to plan meetings of TC endpoints also.
  Our TC end points are saved in venture capital using H323, recorded in CUCM using SIP and exchange of email to can program using the CTManager. And TC endpoints are supplied by our TMS.

  As endpoints of TC may appeal to the endpoints CTS sometimes we have meetings planned between TC and CTS endpoints in the CTManager, but if schedule us a meeting by using the TMS, meetings of CTManager disappear and endpoint show TMS meetings, if we do a resynchronization of the electronic mail room in the CTManager We can see again in the meetings of CTManager in the touchscreen.

  We tried not to allow bookings for this endpoint of TC in the TMS, but later there is no way to schedule a meeting for this endpoint, even using the external call.

  You know any workaround solution to activate the two calendar options running on the same endpoint without removing the CTManager meetings? We don't need the BBFRR for the TMS meetings, only for meetings of the MLC.

  Best regards

  Hello

  Disabling power of the TMS write calendars 'Meetings' on managed systems is not supported. If an endpoint is added to the TMS, TMS assumed that endpoint is not used in another system of planning (such as CTS - man) and could replace any parameter that depends on the other system of planning.

  Kind regards
  Kjetil

• Replace the TMS device

  Hi all

  I only appliance TMS with VCS and TMSagents (applications MOVI), then my TMS has error and had to be replaced by a new.

  is there any procedure to do this replacement for the TMS have TMSagents with VCS to ensure that replication will not be problem. Sorry, I just worriying on replication to be failed.

  because I have a large number of users MOVI.

  Thank you all

  Hello Kalinda

  What kind of error you see on the server of TMS? Maybe the ist possible to fix it?

  Before you replace your server TMS device, you need schedule downtime for maintenance.

  You should back up your sql database and the agent MSDS database. Then install the new TMS server with the corresponding version of the former and restore and backup agent MSDS database. You can then enable replication again.

  Keep in mind that the TMS appliance server is EOL and EOS, but also you can be able to take advantage of the Cisco migration program.

  Please visit this link:

  http://www.Cisco.com/en/us/prod/collateral/ps7060/ps11305/ps11316/ps11338/end_of_life_notice_c51-683062.html

  Concerning

  Rafal

• the host is disconnected and require restart to vcenter

  Get a problem for the host is disconnected and only a reboot of the host gets their return to vcenter.

  Is there an upgrade performed recently at 5.5.

  See you soon

  Petter

  Something goggle and beneath the article, suggest you give a try to this...

  VMware KB: Activation or deactivation of VAAI ATS heart rate

  Concerning

  Rahul