Meeting VMUG / where and when?

Are there regular meetings of the Group of users in the Sacramento area?

The meeting is open to new people?

Is there a regular time and place that the meetings be held?

Thank you

In the Sacramento area user group meets regularly. In general, we meet once a quarter and we should have a meeting next month, but we will officially announce the time and spend here in this forum. We expect to finalize and send the date within the next two weeks, so stay tuned! Still, we have a lot of fun and can expect some good information on version 4 at the next meeting.

Thank you!

Brian Carlton

Tags: VMware

Similar Questions

where and when to call setNamedWhereClauseParam?
I have an adf/jsp page with a table and a form of parameter
I have a bean user with the user id I need to set as a parameter to my viewobject

where should I call setNamedWhereClauseParam method of the viewobject? I tried to call it in getXXXView in my ApplicationModule without effect.
Hello

Once you have dragged attribute of page executeWithParams links are created in the PageDef for each variable binding.

Just the value of the name attribute of the user in the value of page definition to your attribute of bean to support using the expression language.

What security model do you use for your application? If you are using the J2EE security, you can get the current user in the Module of the Application.

Kind regards
Brenden

My home page is MY MSN and when I go to a certain article and I am in fact and that the browser goes back to the top of the page MY MSN rather than where I left

If I'm browsing subjects on my homepage and find one that reads my interest, I click on it and the browser goes on this site for me to read. When I'm through with that I hit the back button and on most Web sites, the original page back to where you were before you click on the interesting element. Not MY MSN, which is my home page, it returns to the top of MY MSN, which is irritating, especially if the elements that interest me are a group at the bottom of page on MY MSN and I want to read every 5 or 6 of them. How can I get the browser to return to the place I left?

Try to open the "statutes" in a new tab, and when finished read each article close the tab I hope the MY MSN page original will maintain the position you left it to (unless this page has an automatic refresh frequency, to add new items to the list).

I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?

I live in Germany where - almost all of the computers on the market have windows installed in German. Is it possible to buy a laptop with MS vista in German installation and when I update, I upgrade to the English version of Windows 7?

How your question about Windows Update?

The answer to your question is Yes, if you buy Vista Ultimate or business and move to Win7 Ultimate or business.

Specific Win7 forums include http://social.answers.microsoft.com/Forums/en-US/category/windows7 and http://social.technet.microsoft.com/Forums/en/category/w7itpro/

~ Robear Dyer (PA bear); MS MVP (that is to say, mail, security, Windows & Update Services) since 2002. DISCLAIMER: I do not represent nor don't work for Microsoft

I have windows professional xp and when I try to attach a file to an e-mail or even see where I saved them they do not appear.

Original title: WINZIP HELP

I have windows professional xp and when I try to attach a file to an e-mail or even see where I saved them they do not appear. I'm looking for all THE files, but no zipped files are there. Help, please!

Hello

1. What mail client do you use?

I suggest you to check if the files are hidden:

http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/WIN_FCAB_SHOW_FILE_EXTENSIONS.mspx?mfr=true

Also check out this link:

http://support.Microsoft.com/kb/306531

It will be useful.

I have not connected to hotmail for a while, 3 months or more, and when I did there is absolutely nothing in my Inbox unless the Hotmail team welcome. Where all my stuff?

lack of everything in my email account

I have not connected to hotmail for a while, 3 months or more, and when I did there is absolutely nothing in my Inbox unless the Hotmail team welcome. Where all my stuff?
That's happened?

Darling
Just a step: none forum available choices apply to this question.

Hello CherieBurns,

The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

Windows Live Mail

Windows Live Hotmail

Windows Live Messenger

Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?

my computer broke down and when return to the setting factory. is the same where I can get my old picture when rear, files, etc etc?

Hello

Recuva worked for posters that have been in your same situation here

a clean install wipes the hard drive clean of everything

You cannot undo what you've done

If you have lost data, you can try this

http://www.Piriform.com/Recuva

Read also:

Since we don't know exactly how you reinstalled it seek a windows.old folder

How to restore your personal files after you perform a custom Windows Vista or Windows 7 installation

http://support.Microsoft.com/kb/932912

or even return to a previous operating system by using the information in file window.old at the link below

http://support.Microsoft.com/kb/933168

If the above does not work:

Try the data recovery experts

but they are very expensive

When you use my touch pad, a type of scroll box appears no - where and moves, my cursor on the desktop.

problem of SCROLL key or touch

When using my touchpad on my toshiba laptop, win7, a type of scroll box appears no - where and moving, my cursor on the desktop. He mess to the top of my page. If I scroll, I'll use the cursor down or on either side, so how can I remove this pain forever. Is this Toshiba or win7, one of them must go. Impossible to do my job, to spend way too frustrated time.

Go to your control panel and click on the mouse,

Go to the device settings section,

As you can see it allocate the adjustment.

Sounds like areas of virtual scroll or tap.

I have recently installed Windows 10 and when I try to print a pdf document, it automatically made save me on my hard drive. Is there any where that I can change the settings to eliminate save him? It starts to get boring.

I have recently installed Windows 10 and when I try to print a pdf document, it automatically made save me on my hard drive. Is there any where that I can change the settings to eliminate save him? It starts to get boring.

I thought about it! I went into the plug ins on Chrome and changed a setting. Thank you!

Marie Larsen

Real estate capital

801-597-9926-cell

[email protected]

http://www.marielarsenrealtor.com/> www.marielarsenrealtor.com

'f' Logo Marie Larsen-Equity real estate

https://g.twimg.com/Twitter_logo_blue.PNG Marie_Realtor

Why does'nt my Defender windows appear in my control panel, and when I do a scan of the registry, it says that it is disabled where and how can I find

does anyone know how to locate the Windows Defender feature in Control Panel mines seemed to disappear and when I did a scan of my results showed that i had disabled it how this feature, I know that this probably isn't important but I just wanted to know if the model heads had the answers

Windows Defender cannot be used with AVG, McAfee, MSE or Norton, and several other AV products also report potential problems with Windows Defender. It is part of the Vista and Win 7 operating system and cannot be uninstalled. It must be uninstalled XP if you use AVG, McAfee, MSE and Norton.

http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

MSE and Windows Defender

If this does not solve your problem, please post back and elaborate detailed about your computer, AV programs, etc..

I hope this helps...

By the way where and group by clause Cursor

I'm working on a procedure that generates a where clause clause and needs of a group by clause to return the correct results. I'm moving the two where and group variables in the cursor.

The variables are is filled correctly, but when the cursor is created, variables are not in the cursor.

Here's the code I'm working with. It is part of a package, but does no appeal to other parts of the package.

PROCEDURE createFollowUpTask_Exposure (psUppgkedjetyp IN tis.tial.uppgkedjetyp%TYPE NULL by default,
psAlarmtyp IN tis.tial.alarmtyp%TYPE by default NULL,
psSubtyp IN tis.tial.subtyp%TYPE by default NULL,
pnDays in NUMBER NULL by default,
psKampkod IN tis.tiin.kampkod%TYPE by default NULL,
psKatnr IN tis.tiin.katnr%TYPE by default NULL,
psUtgava IN tis.tiin.utgava%TYPE by default NULL,
psKatslag IN tis.tikg.katslag%TYPE by default NULL,
psProdsyst IN tis.tikg.prodsyst%TYPE by default NULL,
psUppgtyp IN tis.tiin.uppgtyp%TYPE by default NULL,
psProdkod IN tis.tiin.prodkod%TYPE by default NULL,
psStatus IN tis.tiin.status%TYPE by default NULL
) AS
--
cTIAL tis.tial%ROWTYPE;
vLopnr tis.tial.lopnr%TYPE;
vSqlWhere VARCHAR2 (4000);
vGroupBy VARCHAR2 (1000): = "tiin.kampkod, tiin.abnr, tiko.fordsalj;
cSelectCursor SYS_REFCURSOR;
vSqlSelect VARCHAR2 (4000);
psDays VARCHAR2 (50);
cRec T_TIAL_REC;
nCount number: = 0;

--
CURSOR cSqlSelect (SqlWhere IN VARCHAR2, GroupBy IN VARCHAR2) IS
SELECT tiin.kampkod, tiin.abnr, tiko.fordsalj, MAX (tici.regdat) ALARMDATE
OF tis.tiin
JOIN tis.tiko ON tiin.kampkod = tiko.kampkod AND tiin.abnr = tiko.abnr
JOIN core.tici ON tiin.kampkod = tici.kampkod AND tiin.abnr = tici.abnr AND tici.inplnr = tiin.inplnr
WHERE 1 = 1 | SqlWhere
GroupBy GROUP;
--
BEGIN
-If these parameters are null, trigger the error
IF psUppgkedjetyp IS NULL and psSubtyp IS NULL THEN
raise_application_error (-20001,
"String from the event or events must be assigned");
END IF;
-Fill the TIAL values
IF psUppgkedjetyp IS NOT NULL THEN
cTIAL.Uppgkedjetyp: = psUppgkedjetyp;
END IF;
--
IF psAlarmtyp IS NOT NULL THEN
cTIAL.Alarmtyp: = psAlarmtyp;
END IF;
--
cTIAL.Handklass: = 't';
cTIAL.Blobid: = 0;
--
IF pnDays IS NOT NULL THEN
psDays: = '+' | pnDays;
END IF;
IF psSubtyp IS NOT NULL THEN
cTIAL.Subtyp: = psSubtyp;
END IF;
-Create Where clause for cursor
vSqlWhere: = ";
IF psKampkod IS NOT NULL THEN
vSqlWhere: = vSqlWhere | "AND tiin.kampkod ="' | psKampkod | " ' ;
END IF;
--
IF psKatnr IS NOT NULL THEN
vSqlWhere: = vSqlWhere | "AND tiin.katnr ="' | psKatnr | " ' ;
END IF;
--
IF psUtgava IS NOT NULL THEN
vSqlWhere: = vSqlWhere | "AND tiin.utgava ="' | psUtgava | " ' ;
END IF;
--
IF psKatslag IS NOT NULL THEN
vSqlWhere: = vSqlWhere | "AND tikg.katslag ="' | psKatslag | " ' ;
END IF;
--
IF psProdsyst IS NOT NULL THEN
vSqlWhere: = vSqlWhere | "AND tikg.prodsyst ="' | psProdsyst | " ' ;
END IF;
--
IF psUppgtyp IS NOT NULL THEN
vSqlWhere: = vSqlWhere | "AND tiin.uppgtyp ="' | psUppgtyp | " ' ;
END IF;
--
IF psProdkod IS NOT NULL THEN
vSqlWhere: = vSqlWhere | "AND tiin.prodkod ="' | psProdkod | " ' ;
END IF;
--
IF psStatus IS NOT NULL THEN
vSqlWhere: = vSqlWhere | "AND tiin.status ="' | psStatus | " ' ;
END IF;
-Browse all records in input parameters of the meeting and set values required TIAL.
I'm IN cSqlSelect (vSqlWhere, vGroupBy)
--
LOOP
-EXTRACT cSelectCursor INTO cRec;
cTIAL.Kampkod: = ";
cTIAL.Abnr: = ";
cTIAL.Sign: = ";
cTIAL.Alarmdate: = ";
cTIAL.Kampkod: = i.Kampkod;
cTIAL.Abnr: = i.Abnr;
cTIAL.Sign: = i.fordsalj;
cTIAL.Alarmdate: = i.alarmdate;
--
nCount: = nCount + 1;
--
IF vLopnr = - 1 THEN
raise_application_error (-20002,
"Error creating task for: ' | '. cTIAL.Kampkod |' '|| cTIAL.Abnr |' Sales representative: ' | cTIAL.Alarmdate);
END IF;
END LOOP;
DBMS_OUTPUT. Put_line (' I created ' | nCount |) "documents.");

END createFollowUpTask_Exposure;

Thanks in advance for any help.

Hello

Welcome to the forum!

Try this (untested) example:

PROCEDURE createFollowUpTask_Exposure(psUppgkedjetyp IN tis.tial.uppgkedjetyp%TYPE DEFAULT NULL,
                                      psAlarmtyp     IN tis.tial.alarmtyp%TYPE DEFAULT NULL,
                                      psSubtyp       IN tis.tial.subtyp%TYPE DEFAULT NULL,
                                      pnDays         IN NUMBER DEFAULT NULL,
                                      psKampkod      IN tis.tiin.kampkod%TYPE DEFAULT NULL,
                                      psKatnr        IN tis.tiin.katnr%TYPE DEFAULT NULL,
                                      psUtgava       IN tis.tiin.utgava%TYPE DEFAULT NULL,
                                      psKatslag      IN tis.tikg.katslag%TYPE DEFAULT NULL,
                                      psProdsyst     IN tis.tikg.prodsyst%TYPE DEFAULT NULL,
                                      psUppgtyp      IN tis.tiin.uppgtyp%TYPE DEFAULT NULL,
                                      psProdkod      IN tis.tiin.prodkod%TYPE DEFAULT NULL,
                                      psStatus       IN tis.tiin.status%TYPE DEFAULT NULL) AS
   --
   cTIAL         tis.tial%ROWTYPE;
   vLopnr        tis.tial.lopnr%TYPE;
   vSqlWhere     VARCHAR2(4000);
   vGroupBy      VARCHAR2(1000) := ' tiin.kampkod, tiin.abnr, tiko.fordsalj';
   cSelectCursor SYS_REFCURSOR;
   vSqlSelect    VARCHAR2(4000);
   psDays        VARCHAR2(50);
   cRec          T_TIAL_REC;
   nCount        NUMBER := 0;

   FUNCTION fnc_cSqlSelect(SqlWhere IN VARCHAR2,
                           GroupBy  IN VARCHAR2) RETURN VARCHAR2 IS
   BEGIN
      RETURN 'SELECT tiin.kampkod,
             tiin.abnr,
             tiko.fordsalj,
             MAX(tici.regdat) ALARMDATE
        FROM tis.tiin
        JOIN tis.tiko ON tiin.kampkod = tiko.kampkod
                     AND tiin.abnr = tiko.abnr
        JOIN core.tici ON tiin.kampkod = tici.kampkod
                      AND tiin.abnr = tici.abnr
                      AND tici.inplnr = tiin.inplnr
       WHERE 1 = 1 ' || SqlWhere || ' GROUP BY ' || GroupBy;
   END fnc_cSqlSelect;

BEGIN
   -- If these parameters are null, raise error
   IF psUppgkedjetyp IS NULL AND psSubtyp IS NULL THEN
      raise_application_error(-20001,
                              'Either Event Chain or Starting Event must be assigned');
   END IF;
   -- Populate TIAL values
   IF psUppgkedjetyp IS NOT NULL THEN
      cTIAL.Uppgkedjetyp := psUppgkedjetyp;
   END IF;
   --
   IF psAlarmtyp IS NOT NULL THEN
      cTIAL.Alarmtyp := psAlarmtyp;
   END IF;
   --
   cTIAL.Handklass := 'T';
   cTIAL.Blobid    := 0;
   --
   IF pnDays IS NOT NULL THEN
      psDays := '+ ' || pnDays;
   END IF;
   IF psSubtyp IS NOT NULL THEN
      cTIAL.Subtyp := psSubtyp;
   END IF;
   -- Create Where clause for cursor
   vSqlWhere := '';
   IF psKampkod IS NOT NULL THEN
      vSqlWhere := vSqlWhere || ' AND tiin.kampkod = ''' || psKampkod || '''';
   END IF;
   --
   IF psKatnr IS NOT NULL THEN
      vSqlWhere := vSqlWhere || ' AND tiin.katnr = ''' || psKatnr || '''';
   END IF;
   --
   IF psUtgava IS NOT NULL THEN
      vSqlWhere := vSqlWhere || ' AND tiin.utgava = ''' || psUtgava || '''';
   END IF;
   --
   IF psKatslag IS NOT NULL THEN
      vSqlWhere := vSqlWhere || ' AND tikg.katslag = ''' || psKatslag || '''';
   END IF;
   --
   IF psProdsyst IS NOT NULL THEN
      vSqlWhere := vSqlWhere || ' AND tikg.prodsyst = ''' || psProdsyst || '''';
   END IF;
   --
   IF psUppgtyp IS NOT NULL THEN
      vSqlWhere := vSqlWhere || ' AND tiin.uppgtyp = ''' || psUppgtyp || '''';
   END IF;
   --
   IF psProdkod IS NOT NULL THEN
      vSqlWhere := vSqlWhere || ' AND tiin.prodkod = ''' || psProdkod || '''';
   END IF;
   --
   IF psStatus IS NOT NULL THEN
      vSqlWhere := vSqlWhere || ' AND tiin.status = ''' || psStatus || '''';
   END IF;ç
   -- Loop through all records meeting input parameters and set required TIAL values.
   OPEN cSelectCursor FOR fnc_cSqlSelect(vSqlWhere,
                                         vGroupBy);

   LOOP
      FETCH cSelectCursor
         INTO v; -- You must define a variable 'v' to hold the data of cursor
      EXIT WHEN cSelectCursor%NOTFOUND;

      --FETCH cSelectCursor INTO cRec;
      cTIAL.Kampkod   := '';
      cTIAL.Abnr      := '';
      cTIAL.Sign      := '';
      cTIAL.Alarmdate := '';
      cTIAL.Kampkod   := i.Kampkod;
      cTIAL.Abnr      := i.Abnr;
      cTIAL.Sign      := i.fordsalj;
      cTIAL.Alarmdate := i.alarmdate;
      --
      nCount := nCount + 1;
      --
      IF vLopnr = -1 THEN
         raise_application_error(-20002,
                                 'Error Creating task for: ' || cTIAL.Kampkod || ' ' ||
                                 cTIAL.Abnr || ' Sales Rep: ' || cTIAL.Alarmdate);
      END IF;
   END LOOP;

   CLOSE cSelectCursor;

   DBMS_OUTPUT.PUT_LINE('I created ' || nCount || ' records.');

END createFollowUpTask_Exposure;
/

Kind regards

I installed LeechBlock and now I can not find! Can someone tell me where and how to access it?

Hello

I'm new to using addons, so please forgive my ignorance. I installed LeechBlock and now I don't see where to find it. Can someone tell me where and how to access it? I looked under Addons on the Tools menu, but this is just options to install addons more.

I thought there would be a button on the toolbar, or even a new toolbar, but I don't see anything...

Thanks in advance!

Hi, you are almost there! When you look at the Add - ons you must select the Extensions on the left side, and you should see and your AdBlock plus. It can also be a button on the bar of 3 menu - but I'm not familiar with that particular module so cannot be sure about that.

Hope that helps.

I have a new laptop and when I transferred my music Itunes can't find it. Is that a large library is more quickly to locate my music than 1 file at a time

I bought a new laptop and transferred my music from my old laptop to my new laptop, and when I downloaded the new version of ITunes, it couldn't locate my music. Is there an easier way to locate my music than 1 file at a time? It is a great library and will take several days to move each file. I have a new Toshiba laptop with windows 10 OS with an I7 CPU 2.60 GHz with 8 GB of RAM

The "missing file" error occurs if the file is no longer where iTunes is expected to find. Causes possible is that you or a third-party tool has moved, renamed or deleted the file, one of its parent folders, or the reader, he feeds has been a change to the drive letter. It is also possible that iTunes has changed from waiting for the files in the presentation of pre-iTunes 9 post-iTunes 9 layout, or vice versa, and so looking for a bit in the wrong place.

Select a track with an exclamation point, use Ctrl - I to get the information, and then click No when asked to try to locate the track. (Because of a bug in iTunes 12 you currently have to say no twice!) Look under the Summary tab for the location that iTunes thinks that the file should be. Now look around your hard drive. I hope you can locate the track in question. If a part of your library has just been moved, renamed a folder or a drive letter has changed, it should be possible to reverse actions. If the difference between the two railroads is an additional music directory in a path, then it is a problem of layout. I can explain more if this is the case. If everything is where it is supposed to be trying to fix the security permissions for iTunes for Windows.

In some cases, iTunes may be able to repair itself if you go through the same steps with Get Info, but this time, click on search and browse the lost track. He peut then offers to try to automatically correct the other broken links. Although he said something like 'use the same location' I think he expects to find the titles in the same layout artist & album that they were before, with a systematic change to the path.

If another application like Windows Media Player has moved/renamed files then the chances are that subtle differences in naming strategies will make it difficult to restore media on the precise way that iTunes is expected. In this case, as long as the missing files somewhere, you should be able to use my FindTracks script for reconnecting to iTunes. See this post for an explanation of how it works.

If you want me to try to provide specific advice, please post back the following details:
1. The location of the media file under Edit > Preferences > advanced
2. The location of a sample of missing follow indicated under Get Info > file > location which begins file://localhost/
3. The real path to the file which you gave 2 details.
Or you could go back to the old computer and see make a library of portable split, then copy the library into a portable State.

TT2

Bytes to Port property node. When to use and when not?

Hi all

Ive frequently used bytes to port property node performing bed series and have not experienced any problems. I've heard mixed on this subject reviews and I would like to know when to use and when not to use it.

Thanks for any input.

I will start by when it should not be used.

When there are (as readable) ASCII data to come through and it is separated by a termination character. Select the stop character and read more bytes than you ever expect a given message.

When there are binary data, but a protocol where you know clearly how the message package is put in place. In this case, you want to disable the stop character because any octet can be given legitimate and be interpreted as the stop character. With these protocols, if you know the message is always X bytes, read X bytes. If the message is of variable length, but the Protocol is set to tell you low for a long time the message is, and then make partial readings. So if each message starts with 2 bytes that says follow X bytes. Then read 2 bytes, which converted to a number, then read this number of bytes.

When to use:

The only time will really use bytes to the port is if you use a terminal of the installation type. Just enter and display on-screen what never happens happened at the port since the last time it was read. When you don't care where are message breaks.

If you use bytes to the port and care message breaks, then you're obligated to all your new message concatenated to a string, you store in a shift register and each reading analysis through data to determine if you have a complete message and valid. If you do not, do nothing and go back and read more. In fact, you will need to run through the chain of data several times in a row before coming back to reread in the case where the message ever resulted in a single reading packets.

The vast majority of applications falls into one of the above situations. The last situation is not as common, and if you use bytes to the port with a system of e-mail that has defined a defined protocol or packages, you do a job more in programming to maintain a software buffer of data as well as the hardware buffer to the serial port.

the gme and NEXON combat arms was not letting me use the wasd keys to control. so I left the game, and when I stopped I had a noticce that says error code 21

original title: Devicewhat is the error code 21

I went on the nexon combat arms and the gme was not letting me use the wasd keys to control. so I left the game, and when I stop, I got a noticce that says error code 21! What it means?

Hello

We really need more information - ask in the games and/or Windows Forums for your
version of Windows.

Answers - Windows Forums
http://answers.Microsoft.com/en-us/Windows

You can also check your version of Windows, then good topic Windows: games.

It is a question where you may need to actually test in several forums.

Don't forget to check the known issues with the support from the game and forums, but also any device
in question.

-------------------------------------------

Reboot to see if the problem comes back.

Here are the general meaning.

21

Windows removes this device. (Code 21)

Wait a few seconds, and then refresh the display of the Device Manager. If the device appears, restart the computer.

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

Meeting VMUG / where and when?

Similar Questions

Maybe you are looking for