Mega problems with 6.0 upgrade, possible to roll back?

Similar Questions

• Big problems with fonts after upgrade to Yosemite

  Hello

  I upgraded my macbook pro to Yosemite for more than six months and since then, I have serious problems with application of fonts in browsers and many software I use. I googled the problem over and over again and nothing seems to help.

  In general, these are the main symptoms of the problem with screenshots:

  1 system ads are gibberished, or better yet, appearing with something like that, instead of letters:

  

  2. bold letters does not at all (when I use gmail, for example) or leads to an illegible font change:

  

  3. hyperlinks symbols on Web sites or webmail applications simply appear as empty squares and there is no way of knowing what you click on.

  

  Bottom line: before turning to the last option and the resettlement of Yosemite, if someone could help, I'd be more than grateful.

  < image edited by host to remove the serial number >

  You probably have a lot of fonts installed garbage. Follow these steps to recover your Mac for only the fonts installed in OS X.

  (1) open the book fonts and choose restore fonts Standard menu. All third-party fonts will be moved out of the system and root of the fonts in the library files in a new folder next to each named (deleted) Fonts.

  2) click on the desktop so Finder is the name of the app next to the Apple logo in the upper left corner. Hold down the Option key and choose go > library. This will open your user account's library folder. Create a new empty folder on the desktop. Open the folder fonts in your user account. If there is something in it, move them to the new folder on the desktop.

  3) restart in Mode safe mode by rebooting and hold down the SHIFT key. When you reach the office (you need to log in Mode without failure), restart normally. Among other things, this erases all the cache files on the account of the user logged in Mode safe mode and resets the database of book of fonts for this account.

  (4) clear all remaining the system font cache files. Close all the running applications. From an administrator account, open the Terminal application and enter the following command. You can also copy and paste from here in the Terminal window:

  sudo atsutil databases - remove

  Terminal will then ask your admin password. When you type, it will not show anything, so make sure you enter it correctly.

  This command removes all the font cache files. To the system and the current connected to the user account. After you run the command, close Terminal and immediately restart your Mac.

  Now test. With only fonts available provided OS and all data policies implemented cache and other such parameters cleared and reset, fonts should appear correctly in the system.

• problem with netflix after upgrading to firefox 6

  now that I've upgraded to firefox 6 I can't spy snapshot netflix more. Please help I don't want to use a different browser to do this.

  This also works if you have problems with the update of Mozilla FireFox 10.0 if you dress like 9.0.1 in accordance with the instructions of the DavidLee1951. Thank you, David Lee!

• FSX and FSX acceleration not will not activate after the uninstallation and reinstallation of the following problems with Windows 7 upgrade

  After the upgrade to Windows Vista Ultimate SP2 Windows 7, I couldn't FSX to load.  It would hang at the splash screen.  This has since been resolved and may have been a conflict between my card graphic and sound card and maybe even my webcam.  I then tried to reinstall FSX.  However, I decided to load up the Accerleration as before, but when I entered the activation code it says after trying that he could not get an answer to the server and to verify that I had an internet session active.  I did, but he always refused to activate.  So I uninstalled FSX acceleration and ran repair on FSX.  But now, he wants the activation code for FSX and when I write this so I always get the message that it cannot get a response from the server, please try again later or check that your internet connection is active.  I have the full internet connection, but doesn't understand why it won't save my activation codes.  I am limited to 30 minutes and cannot be installed acceleration as it wants the code for FSX.  I read on the forum that you can uninstall and reinstall on the same computer as many times you like then why used enable it?  It seems that he doesn't like my internet connection even though I am on the internet.  Anyone has any ideas. My pc is a Dell Inspiron 530 s with Nvidia 9400Gt card and card Soundblaster with 160 gb 1.66 ghz, 4gig ram and router Netgear WGR614 cable wireless

  Hi steve, I managed to install in the end.  I upgraded to a hard drive more that I wanted more space and copied the image to the new drive.  FSX is not yet accept the keys during the installation.  I ran the above utilities (see blog Amritas) to clear the license keys, empty temporary folders and change the registry entry by using 'regedit' on the command line, but still his wouldn't.  In the end, I installed and uninstalled three times until I finally installed it on a partition on the drive and he finally accepted the license keys.  This was done on the original admin user account that I had problems with from the start.  I have now it works.  The utility I used was KB928080 Microsoft.   I can only suggest you keep trying or partition of your hard drive and try and install on the new partition after erasing the license keys and temp folders (see above Amrita).  I can't guarantee that it works well.  To me it's a question of licenses i.e. acceleration has been uninstalled and reinstalled many times so it will no longer accept the license keys.  Happy installing! I don't know how is it frustrating.

• Several problems with Windows 8 - Upgrade-unable to download full

  Original title: several problems with Windows 8

  Last Sunday, after downloading Ab2word, my tiles shortcuts stop working. I have uninstalled the program, but nothing improved. I made an update of Dell and got the shortcuts work again (curiously I could always connect via the desktop). now, I get a message saying that Windows is disabled and to enable him, by putting in... but he says that it is impossible to activate. Then I tried the upgrade to 8.1 by the store and got a message saying that I was unable to complete the download. Now my shortcuts tiled work, but they open the sites registered by the office, not as a full screen. I tried to restore to the factory and now get the message that the system is unable to restore. I ran a dell diagnostic and it showed nothing. I did a full security scan and he came clean. I'm rapidly reaching crisis. When you try to seek help on the Web site, Windows 8 is not listed... It is 7 to 8. 1. any suggestions? This computer is less than 2 years old and I'm ready to take a hammer to it.

  Hello David,.

  Please write to us and offering the opportunity to help Microsoft Community.

  What exactly do you mean when you say "Windows is disabled and enable it via the setting..."?

  You receive the "Cannot download" error during upgrade to Windows 8.1, I'll follow the steps by David Williams Dixon in the Blog below.

  Something happened and the 8.1 Windows installation may not be completed. (And now you are bored)

  We know if the steps help you in upgrading the computer to Windows 8.1.

• Several problems with photoshop after upgrading to win10

  I've updated to win 10 a week ago and today I experienced several problems with photoshop. The first question is about the quick selection tool. I select and try to choose an area on the picture I want to work on. It performs either one of two things. F1. It won't select anything finally photoshop will crash. 2 when he decided to select something it goes super slow and will switch to the symbol of thought every few seconds.

  second question...

  Because I can't get select quick took the job I'll move the pen tool. I started to select anchor points and ill get maybe 20 points the image then becomes completely black. If I scroll top down I can clearly see the parts of the image, but when I stop scrolling returned to a black square. Later photoshop then crash.  TSF is to face all of a sudden?

  Make sure that your GPU drivers are perfectly up-to-date (directly from the manufacturer) and they are 10 Windows compatible. You can also try a reset preference:

  Win: Press and hold the keys Ctrl + Alt + Shift immediately after the launch of Photoshop starting. A box will appear asking if you want to continue with the reset, select 'yes '. If you don't see this, you're not fast enough... Try again.

  Benjamin

• Problems with masks after the sequence first SpeedGrade back (CC)

  Hello

  I'm color ranking a clip in SpeedGrade CC using the new direct link function. For calibration of the colors I used masks and also the different layers. Once I'm done, I sent my sequence back to first Pro CC.

  I see, first shows me exactly the color correction, I did in SpeedGrade, except for one thing:
  The places where I used the masks in SpeedGrade to illuminate their for example a little until now are filled with lines pixeled...
  I thought it's just a problem with the preview, so I exported it. Slept pixeled lines.

  Once again: in SpeedGrade is all fine, but when I send the return sequence to the first there are those pixels.

  It's really irritating because one day before it worked fine with no problems and I was virtually the same as now.

  Please help me if you can! Thank you!

  Ok.

  The GPU acceleration is turned on?  Have you tried to turn it off?  You have a card AMD or nVidia?

• Problems with the movement of the front and back layers

  Hey everybody!

  I am very new to Flash, very very new to actionscript and basically, I started programming in general 2 days ago, and I have a problem with the layers in a project. I tried learning through books, but especially thanks to youtube tutorials, but I'm stuck here.

  Here is the .swf file: http://dl.dropbox.com/u/14319641/Flashprojekte/Variuscard%20Headertest.swf

  And here is the original .fla file: http://dl.dropbox.com/u/14319641/Flashprojekte/Variuscard%20Headertest.fla

  Two problems:

  1. I want maps to fly BEHIND the Logo, but in front of the shadow - so that it seems that the logo is original and the rest (maps and shadow) is in the back. I have 3 layers (Logo, Action, shadow), but no matter how to move around it do not go to the back...

  2. I would like to have a second fountain Let's say right left... can I just copy and paste the code? Seems similar is not...

  Can someone help me on this one? Pleeeeez ?

  Mike

  To create an empty movieclip you just select Insert-> new symbol and select movieclip and click OK.  Simply exit the editing for this movieclip mode by selecting Edit-> Edit the Document.  You now have a new empty movieclip in your library.

  With the desired layer selected, drag an instance of the movieclip in the library in the upper left corner of the stage and then give it an instance name of "mc" in the properties panel.

  I have no CS5.5, so I don't know if what I described in selecting is changed in the new design.

• Old problem with images HD upgrade taking into account

  Hi all

  I've been here with this issue since day one with my rig (2.5 years).

  I'm not able to edit HD images correctly, the editing process is super slow, I can't seem to get an overview of the sequence, because it comes to accuse.

  The images are numerous cameras each film, DSLR, GoPro, MTS, etc..

  I work at 90% of the time with a single video stream.

  
  

  My current setup is:

  I7 2600 k 3.4 (no OC), p8z68 v pro MOBO, 16 GB of ram (4x4Go G.Skill RipJaw X Edition Dual Channel CL7-8-7-24)

  GTX 560 Ti

  caviar black 500 GB sata for os 3

  2 * 1 TB caviar black sata 3 raid for project & media

  2 * 1 TB sata 3 raid of black caviar to Scartch, Renders, etc..

  caviar green 2 TB for backups.

  * using the embedded raid controller.

  
  

  My workflow is really painful, I work with proxy files to overcome the problem of slow editing;

  1. get clips hd from the client

  2 encoding files in low resolution avi/mpeg

  3 mounting

  4 link sequences HD media (manually - approx. 30-40 minutes)

  5 error checking

  6. review of the movie - very slow due to the HD

  7. export

  Then. any movie, takes forever.

  A lot of people are trying to help with my current hardware, but I couldn't find a single solution to the problem.

  So, I want your advice, I had to upgrade my rig? because if I know that the update in a budget will have things smooth, it will be worth it in the short term.

  If you recommend the upgrade, which should go for? What can I keep?

  Thank you and best regards,

  Mehdi.

  Biran, welcome to the forums

  Because of your GoPro and DSLR media without any overclocking you really need a lot more CPU power.  At least a hex-core.  But the first thing you need to do is read encyclopedia of prejudice on building a computer Assembly for Premiere Pro on our web site, in particular its Pages Tweakers.  Especially look at this chart to see why you need this upgrade of the CPU.

  

  Note that the GoPro and DSLR QT are both very intensive CPU.  Initially you could just start with a new motherboard, processor and CPU cooler; and possibly reuse your RAM, GPU and hard drives.  We should know more info about your business supply and power.  The next update (later) would be in the area on the hard disk.

• Problem with WSUS after upgrade of SQL and SCCM

  A few years ago, we implemented SCCM 2012 R2 on a virtual machine running Server 2008 R2 (Enterprise), using 2012 SQL for databases.  We use it for software deployment, updates/patches via WSUS and imagery of the network.  Everything is smooth enough for most, even if we hit a few snags Windows 10 points when that came out.  After you install the patches and updates to our Server 2008 box to make it compatible with Windows 10 content, everything was good again.  A few weeks ago, I decided to update our version of SCCM 1511 and SQL for 2014.  After the two updates, I tested imaging and software deployment, and everything seemed good.  I forgot WSUS, however... and later visited account it was not working properly for these updates.  Unfortunately, I realized after I deleted the VM snapshot, I got to thinking that everything was good (stupid, I know).  After researching and discovering some of the errors were permissions associated with - why would have changed the permissions on folders of SQL and SCCM upgrade I have no idea - those who have since been smoothed.  Now, my mistakes seem to be related SQL more and I hit a dead end with research.  When I opened WSUS and go look at the clocks, he tries to load the history of synchronization, and after a few minutes-error with the following information:

  The WSUS administration console failed to connect to the WSUS server database.

  Verify that SQL server is running on the WSUS server. If the problem persists, try restarting SQL.

  System.Data.SqlClient.SqlException - Timeout expired.  The delay before the end of the operation or the server is not responding.

  WARNING: The join order has been applied because a local join hint is used.
  Source .Net SqlClient data provider
  Stack trace:

  to Microsoft.UpdateServices.Internal.BaseApi.SoapExceptionProcessor.DeserializeAndThrow (SoapException-soapException)

  at Microsoft.UpdateServices.Internal.DatabaseAccess.AdminDataAccessProxy.ExecuteSPGetSummariesPerUpdate (String computerTargetScopeXml, String preferredCulture, String updateScopeXml, ExtendedPublicationState publicationState)
  at Microsoft.UpdateServices.Internal.BaseApi.UpdateServer.GetSummariesPerUpdate (UpdateScope updatesToInclude, ComputerTargetScope computersToInclude)
  at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetUpdateSummaries (UpdateScope updateScope, ComputerTargetScope computerTargetScope)
  at Microsoft.UpdateServices.UI.AdminApiAccess.BulkUpdatePropertiesCache.GetAndCacheUpdates (ExtendedUpdateScope updateScope, ComputerTargetScope computerTargetScope)

  at Microsoft.UpdateServices.UI.SnapIn.Pages.UpdatesListPage.GetListRows)

  I found a few forums that suggest to uninstall WSUS and delete the database, and then reinstall WSUS.  Unfortunately, when I try install fails... giving only an error code and no other explanation of why.  The error is 0 x 80070643, which is supposed to be due to the current user not having the "sysadmin" in SQL.  However, I have tried with several accounts I checked to make you have the sysadmin role in SQL (and are also part of the Administrators group on the server itself)-always get the same error message.

  I would really like to try to find that rather than wasting his time with the construction of a new server and redo our whole SCCM environment... get the client reinstalled on all our machines to synchronize with a new server appears as a huge headache.  Is there anyone else out there who know what would cause this?  Any help would be greatly appreciated!

  Hello

  This community is for users.

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  SQL Server TechNet forums.

  https://social.technet.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  See you soon.

• Problem with Vista SP2 upgrade

  After upgrade my vista SP1 to SP2, it takes a long time for the display of connection to appear.

  I had seen n number of related topics, and yet am not able to solve the problem... Please help me... !!!

  (And Norton) McAfee applications are known to not uninstall (or upgraded) themselves.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. open Internet Explorer (only) to http://support.microsoft.com/kb/971058 & run the difficulty mode and then AGGRESSIVE and DEFAULT.

  5 restart once again & test.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 13 - a071ng: problems with the RAM upgrade - where is the crack?

  Hey there,

  so today I got my new x 360 a071ng HP. I wanted to upgrade my RAM from the standard 4GBs to 8GBs and replace the HDD with a SSD.

  Replace the HARD drive has been frank and I have not encountered any problems. But there is a problem: I can't find the slot of the RAM.

  The HP website is not saying something about a RAM memory that can be removed and nor does the Crucial site that actually says that there are two available slots.

  -Is anyone can help me? Is it hidden somewhere? Perhaps under the motherboard or the battery? Or is the site condition information simply false and there is no way to upgrade the RAM?

  Best of the Austria,

  Jannis

  Here is the Manual:

  Manual

  See Page 49. Memory access requires the removal of the motherboard I hate to say but if you on the hard drive, you were close. Just pay attention that HP will not honor the warranty if you damage the laptop in the process. Good luck and post if you have any other questions.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Problems with the Express upgrade and an upgrade key

  Before I've had my laptop, I have purcahsed a Windows 7 Ultimate upgrade disks and Windows 7 Professional. I used the ultimate update on my desk and I try to use the Professional on my laptop (which came with home premium).

  The problem is that I now have a "non-genuine" copy of Windows 7 because every time the upgrade does not accept my upgrade key. I understand that they are updated slightly different, but anyway that I actually purchased is more expensive than the anytime upgrade. How to make this work?

  Laptop has Windows 7 Home Premium. I used the Express upgrade to upgrade Windows Professional. Now activate Windows asks me to activate Win7 professional and will not accept the key that came with my Windows 7 Professional upgrade disks. The Activation Assistant says that I don't have the OS to use this key. The online troubleshooting guide says that such an error would occur if I am trying to use the upgraded edition to do a clean install (for example).

  I don't understand, how were you able to upgrade to Windows 7 Professional in the first place through Windows Anytime Upgrade? You have been invited to enter your key first. Windows 7 Home Premium license that you upgraded was activated before the upgrade to Windows 7 Professional through Windows Anytime Upgrade?

  Try the following:

  Click Start, right click on computer

  Click on properties

  Scroll down to the Windows Activation

  Click the link to change your product key

  Enter your product key and use the phone Activation to activate your license. Be sure to explain your situation to the Appeals Officer.

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Problems with calls after upgrade of VCS 8.22

  I've recently updated one of my devices VCS to 8.2.2, but I am having some problems.

  The Setup is as follows:

  VCS-C-1: X8.2.2
  VCS-E: 7.2
  VCS-C-2: 7.2

  EX90s: 7.2

  EX90 > VCS-C-1 (8.2.2) > neighbor area > VCS-E (7.2) > Traversal area > VCS-C-2 (7.2)

  Call is SIP all the way.

  Calls fail in both directions (connects but no audio or video).  Was working fine before the upgrade of VCS-C-1 of 7.2 to 8.2.2.

  If I change the adjacent area of VCS-C-1 to the VCS-E uses a profile of "Custom" with "Duo Video Filter" in position "On", it works very well, although this way I can't use presentation properly.  Even if I have introduced interoperability in any part of the path of the call (force a leg to H323), it works, but again, interoperability has its own set of questions.  Finally, if I register at each endpoint to the VCS-E, everything works, it works just not when you browse all three hop calls.

  The VCS-E is controlled by me, so can be improved if necessary, however VCS-C-2 is in another organization, the upgrade is likely to be much more difficult.

  I know that there are changes to the way video Duo works in X 8 - I noticed that it's moved from an overall command of SIP for by area, I guess it has something to do with it.

  Any ideas?

  Please try to put "Sip media encryption" on page traversal area setting to 'best effort' and give it a try

• Problems with mail after upgrade

  After the update from El Capitan with macOS Sierra my e-mail program does not stay open longer than 3 seconds. I have an end 2013 27 "iMac 3.5 GHz Intel Core i7 with 32 GB of memory.

  Is there any solution for this or am I the only one having this problem?

  Thank you

  Bob

  Test in a new user quickly will tell you if the problem is system-wide or if your user folder that contains the problem.

  You can use the guest user or create a new user to test.

  CREATE A NEW USER

  Go to system-> Preferences, create a new user in users and groups.

  Switch to the new user by logging incoming/outgoing or use the fast user switching.

  You can skip connect with an Apple ID, unless you need to test apps to iCloud. Hit continue and then jump.

  By default only the applications Apple will be in the dock in the new user. Go to Applications to open other apps, that you can test.

  You still see the issue?

  If Yes, then the problem is with your core files.

  If not, then the problem is in your user folder.