Memory in Windows Vista based computer laptop problems

Similar Questions

• Error read-only during the Windows XP networking with a Windows Vista-based computer

  Help, please.  We have set up a working group, the destop with Windows XP behaves as the server and laptop with Windows Vista is the other computer.

  We can share and open all files.

  The problem is with a mortgage loan software. (Chalice)  On the Vista computer, when you try to open a file, we get the error "the file is used by someone else.  You want to open the file in read-only Mode? "We have worked with their Tech Support who insists on the fact that it's a Microsoft set up the problem with the server computer.  In their diagnosis, they say that the cause may be "the server has locked files or you don't have full access to the records.  Their Technical Support remotely connected to our two computers and verified that we have the network set in place correctly-"everyone" has full control of the files.  Both computers have disabled the Windows Firewall.  How can I check if the file is locked by the server?  And why would he block specifically for mortgage loan software?  Any other troubleshooting help would be most appreciated.  They have guaranteed that this software can run on both Windows XP Vista computers & a set.

  Another question - when I right click on the folder that this error message, and then click Properties, on the general tab, attributes, the 'Read only' box is populated with a solid green box.  It can also be a check mark or a cache.  I deleted the solid green box and tick, apply settings, but still no luck.  What is the difference between the solid green box and the checkbox for that?

  Thank you to those who can help - we are really at a loss!

  Edit:

  Additional info - The Windows XP computer using IE 8, 32-bit, Windows XP, Media, 2002 Edition, SP3.

  The Windows Vista-based computer uses Vista Home Premium SP2, IE 8, 32-bit Edition.

  Hello

  I suggest you to send your request in the below link.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  Is it possible to install a device to a Windows Vista-based computer when you can get Windows 98 drivers for the device?

  # You have need Vista compatible drivers - it's the only way it will work.  Installing bad drivers can even to hurt the unit or even your system to not try.  Get a new USB device that works with Vista, and has the correct drivers.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Remote access is possible from the computer of Windows 7 on a Windows Vista-based computer? Email removed for privacy

  Remote access is possible from the computer of Windows 7 on a Windows Vista-based computer?

  If so, please send Web site or instructions on how to

  answer to * address email is removed from the privacy *.

  Hello

  Please note that it may depend on the versions of Vista and Win 7 you have.

  RTD connection consists on the client computer (the computer that initiates the connection) and a host (the computer on which the connection will too.

  All versions of Windows can act as Clients.

  Can host only Vista/Win 7 Pro/ultimate/Ent.

  Therefore, if you have the OS Home versions', you might be out of luck.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• try adding a wired printer Brother MFC-255CW on a Windows Vista-based computer

  try adding a wired printer Brother MFC-255CW on a Windows Vista-based computer

  Hi jande1,

  Please see the following link for the Brother's Web site:

  http://welcome.solutions.brother.com/BSC/public/us/us/en/DLF/DLF/000000/003800/dlf003837.html?reg=us&dlid=dlf003837&dispforlist=1&OS=74&type2=1&prod=mfc255cw_all&c=us&lang=en&flang=40

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Remote Desktop - Windows Vista-based computer to a Windows 7 computer on a local network in my office

  I have a laptop Windows Vista Home Premium that is trying to connect to my Windows 7 desktop. It worked fine when my desktop computer was Windows XP and I was running the same laptop Vista Windows 7, I am now.

  What has changed? I have a modem/router to two sons and has not changed the settings. I just tried opening port 3389 and cutting the firewall of Windows with the same results.

  I have a VPN and the game works fine.

  Get remote desktop dialog box for opening and saving in and I know that it is configured correctly, because when I take my Vista laptop to the office the RD connection works fine and I can see and I work on my Windows 7 desktop computer, so the problem is either something on my home network or with my ISP - using DSL - ideas?

  Thank you

  Joe

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi audacity.

  Terminal Services Gateway (TS Gateway) server enables authorized users to connect to a computer on a corporate network wherever you are on the Internet. Ask your network administrator to provide permission to access them through the TS Gateway.

  Remote Desktop connection: frequently asked questionshttp://windows.microsoft.com/en-us/windows-vista/Remote-Desktop-Connection-frequently-asked-questions

  The problems of desktop remotely
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

  Bindu R - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Beep of the Windows Vista-based computer

  My windows vista makes a beep sound in a two time repeat, beep beep and my screen turns with it, I tried the monitor on another computer and it worked, I think it's maybe a graphics card. And if it is where in my computer can I fix?

  Hello

  "beep" codes normally indicate a hardware problem / failure.

  Go to your computer manufacturer's website and look at the specifications of your PC to see what BIOS you have

  Then read this on the 'beep' error codes to try to see what failed:

  http://www.computerhope.com/beep.htm

  http://www.pchell.com/hardware/beepcodes.shtml

  http://pcsupport.about.com/od/nonworkingcomponent/HT/beepcodestb.htm

  If you are unable to determine the hardware problem yourself, contact the manufacturer if under warranty.

  If it is not under warranty, find a good repair shop premises to take.

  See you soon.

• Unable to play "Star Wars: Commando of the Republic" in the Windows Vista-based computer.

  Changed the title: anyone knows what does this error message mean?

  For centuries, I tried to get this game "Star Wars: Commando of the Republic" to work on my Windows Vista Edition Home Premium, computer portable 32-bit. I have install the program and a few extras with it and when I try to run the application an error message opens (by the way it's called "Microsoft Visual C++ Runtime Library"):

  Runtime error!

  Program:... Republic

  Comando\GameData\System\SWRepublicCommando.exe

  abnormal termination of the program

  Accordign to the card that came with it, my computer program is quite capable of runing the program without falts.

  I hope someone can help

  William

  Hi William,.

  What is the full error message that you receive?

  You can uninstall the Package redistributable Microsoft Visual C++ Runtime for Add / Remove Programs & reinstall again. Later, check to see if the problem persists.

  Package redistributable Microsoft Visual C++ 2010 (x 86)

  Hope the helps of information.

• Background is green instead of white in the Windows Vista-based computer.

  Original title: green background.

  Operating windows vista.  Background is green when it is normally white.  I tried the Windows color and appearance with no luck.

  Fixed a problem.  Reinstall the BIOS when starting upwards.

• Cannot change the size of the icons in the Windows Vista-based computer.

  Original title: Silent Storm, a prophet of Jesus.

  My windows Vista is no longer able to change its icons of iconic sizes appropriate; How can I fix it, because it always gives me small looking icons missed upward?

  Hello

  You can see the article provided below for more information on the change in size of the icons in Windows Vista.

  Expand your computer screen: 6 ways to make it easier to see

  http://www.Microsoft.com/athome/Setup/magnify.aspx

  See also:

  Change the screen resolution

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

• KB2518870 and KB2539636 keep reapearing updates for my Windows Vista-based computer

  I have a Dell XPS 420 32-bit Windows Vista.the problem is with security updates. The following updates keep reappearing for down load. Security for Microsoft Update. NET Frame work 4 on Windows XP, Windows Server 2003 Windows Vista Windows 7 KB2518870, KB2539636, KB2468871 and KB2533523. Updates are always successful however they keep reappearing for down load. Are these just continuous updates? I would like something that would change the number of KB?

  Hello

  Have you tried this utility: http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

• Share printer and file sharing has stopped working. -Between a Windows Vista-based computer, a Windows 7 PC and an Xbox 360

  A computer running windows vista and is connected

  Computer B is running windows 7 and it is wireless

  Is the Xbox 360 Wireless

  a couple of weeks computer disappeared from computer B and my xbox network adapter. computer a can still pull files from computer B, but it does not work the other way around. Computer B can share files with my xbox, but computer cannot.

  http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

  Networking of computers running different versions of Windows

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  Have a read of the link above re Vista file and printer sharing.

  Permissions/Share info is there as well.

  If you use Norton, McAfee, Trend Micro or Kaspersky I.S., make that file and printer sharing is enabled in THE Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall)

  Read the information above.

  See you soon.

  Mick Murphy - Microsoft partner

• How to play 3gp on Windows Vista-based computer

  I sent a video I took on my cell phone to my box of e-mail on my Windows Vista laptop and I can't play the video.  I also want to convert the 3gp into a format that I can send an email to others and they will be able to play the video.  Thank you!

  I sent a video I took on my cell phone to my box of e-mail on my Windows Vista laptop and I can't play the video.  I also want to convert the 3gp into a format that I can send an email to others and they will be able to play the video.  Thank you!

  =============================================
  Maybe the following link offers a few ideas:

  How to play .3gp files created by Windows Phone on your desktop
  http://blogs.technet.com/Vik/archive/2009/03/31/how-to-play-3GP-files-created-by-your-Windows-phone-on-your-desktop.aspx

  Also, the following media players freeware can play .3gp files:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.videolan.org/

  Media Player Classic
  http://www.filehippo.com/download_media_player_classic/
  (just unzip and run it... (no installation required)

  The following freeware can convert .3gp files to .wmv format.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Format Factory
  http://www.pcfreetime.com/
  (FWIW... installation..., you can uncheck
  ('all' boxes on the last screen)

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Adding data sources on the Windows Vista-based computer

  I have ColdFusion on my local workstation and I'm looking to add a data source by using the administrator Web site. It worked perfectly on my previous XP machine, but it does not work on my new Windows Vista machine. The data source is a Microsoft Access database stored locally on the c:\ drive. After clicking on the "send" button, the site administrator returns this error message:
  
  Cannot update the NT registry.
  DRIVERPATH variable is not defined.
  
  Any ideas? Thank you!

  TorreyBrown wrote:
  > I have ColdFusion on my local workstation and I try to add a
  > by using the data source administrator Web site. It worked perfectly on my
  > previous XP machine, but it does not work on my new Windows Vista machine.

  Windows Vista is not supported with CF 7. You have three options:
  -Try the CF 8 'Scorpio' beta from http://labs.adobe.com/
  -use a database that works with the driver of JDBC Type 4 over TCP/IP
  -use a supported operating system

  Jochem

  --
  Jochem van Dieten
  Adobe Community Expert for ColdFusion

• Internet connection not available. Need Ethernet drivers. Reinstalled Windows XP on the Windows Vista-based computer.

  Original title: Install Ethernet drivers after installing Windows Xp Home Edition Version 2002 Service Pack 2

  I have a laptop Gateway that used to have VIsta on it, but recently, I put Windows Xp Home Edition Version 2002 Service Pack 2 on it and everythings works perfectly, but now I can't Conenct to the Internet it show no connections and I need the drivers for the Internet if anyone can help me please would appreciate it thanks :)

  Hello

  What is the model number of the computer?

  I suggest you to contact the computer manufacturer site and download Ethernet drivers for the Windows XP operating system.

  You can go to the following website, and then click the Select a product model , then select the model of the computer to download drivers Ethernet, transfer these drivers on his computer using a flash drive and then install.

  Here is the link: http://support.gateway.com/product/?cmpid=supportnav

  You can also see the following article for more information.

  Of connection problems in Windows wireless and wired network: http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows